HP Latex 850 Site Preparation Guide

HP Latex 850 Manual

Get HP Latex 850 PDF manuals and user guides View all HP Latex 850 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Latex 850 manual content summary:

  • HP Latex 850 | Site Preparation Guide - Page 1
    Latex 850 & 820 SCITEX LX850 & LX820 Printers Site preparation guide
  • HP Latex 850 | Site Preparation Guide - Page 2
    to change without notice. The only warranties for HP Products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors
  • HP Latex 850 | Site Preparation Guide - Page 3
    Introduction ...1 System configuration ...1 Documentation ...1 Site preparation overview ...1 Customer responsibility ...2 2 Site preparation ...5 Planning for printer installation 5 Installation time schedule ...5 System operation requirements 6 Air supply requirements (pneumatic spindle 10 Room
  • HP Latex 850 | Site Preparation Guide - Page 4
    iv ENWW
  • HP Latex 850 | Site Preparation Guide - Page 5
    The following manuals are provided with your printer, and can also be downloaded from http://www.hp.com/go/LX820/manuals/ or http://www.hp.com/go/LX850/manuals/. ● Site preparation guide ● Site preparation checklist ● User's guide ● Maintenance and troubleshooting guide ● Legal information
  • HP Latex 850 | Site Preparation Guide - Page 6
    It is important to read the information provided in this guide thoroughly and ensure complete compliance with all installation and See Safety installations on page 13. RIP installation If you have bought HP RIP software for your printer: ● You must ensure that a computer is available on which to
  • HP Latex 850 | Site Preparation Guide - Page 7
    In order to perform remote support, the printer must have access to the LX850, or LX820 with Dual Roll Kit), two rolls of 1524 mm ( (60 in)). Return the site preparation checklist The checklist must be completed and returned to your reseller or service printer's ink, available from http://www.hp.
  • HP Latex 850 | Site Preparation Guide - Page 8
    further information, please refer to the MSDS document about your printer's ink, available from http://www.hp.com/hpinfo/community/ environment/productinfo/psis_inkjet.htm. Within some countries covered by the 'HP Planet Partners Returns', HP is offering a recycling program. For full details of this
  • HP Latex 850 | Site Preparation Guide - Page 9
    ensure a smooth and trouble-free installation process is provided in this guide. The installation Time to completion (LX850) Installation and System HP Scitex Onyx RIP ● Queue manager ● Configure Printer (Quickset, Device Output, Media, Page size, Properties) ● Main items of the Preflight (Printer
  • HP Latex 850 | Site Preparation Guide - Page 10
    including three-phase branch circuit breaker 5. HP Internal Print Server computer NOTE: Remember that you are required to follow the local laws, regulations, and standards that pertain to the electrical installation of your printer. NOTE: The LX820 or LX850 are not supplied with a three-phase cable
  • HP Latex 850 | Site Preparation Guide - Page 11
    of 50 Hz or 60 Hz 3 × 200-220 V~ (±10%) 60 Hz1 15 kW 50 A CAUTION: Ensure that input voltage is within the printer's rated voltage range. The printer requires three-phase power. Three-phase power provides a more efficient means of supplying large electrical loads than single-phase power, which is
  • HP Latex 850 | Site Preparation Guide - Page 12
    of the printer, and should be in accordance with the wiring standards of the country of installation. The electronic control components and HP Internal Print Server printer requires two branch circuit breakers: one for the single-phase line and one for the three-phase line. Table 2-4 LX820 & LX850
  • HP Latex 850 | Site Preparation Guide - Page 13
    variation equal to or lower than 3% voltage unbalance, and 5% voltage sag. If the maximum variation is not within this range, print quality and printer operation may be affected. Contact your electricity supplier to remedy any voltage unbalance or sag. To avoid certain specific system errors in some
  • HP Latex 850 | Site Preparation Guide - Page 14
    uninterrupted copper ground wire from the main building service panel. These should run in the same conduit be provided by the customer. TIP: HP recommends that you use an air compressor required) Regulator with pressure gauge Pneumatic connector The printer comes with an air gun that you must
  • HP Latex 850 | Site Preparation Guide - Page 15
    . Failure to keep these environmental conditions within the standard ranges may cause image quality problems or damage sensitive electronic components. Table 2-8 Printer environmental specifications Temperature range Humidity range Temperature gradient Operating for optimal print quality 20 to
  • HP Latex 850 | Site Preparation Guide - Page 16
    vapors may be produced when printing with water-based HP Latex inks, especially when printing on porous substrates. In LX850 1100 kg (2425 lb) 367 kg (809 lb) Your printer has four wheels used to move the printer and three feet that must be lowered to touch the ground and support the printer
  • HP Latex 850 | Site Preparation Guide - Page 17
    Site preparation LX820 & LX850 A 5.718 m (225.11 in) B 3.650 m (143.69 in) C 1.485 m (58.46 in) (no carpet) ● Easy to clean ● Durable ● Free from strong vibrations Lighting Whenever your printer is in operation, the print production area should be well lit to provide the operator with
  • HP Latex 850 | Site Preparation Guide - Page 18
    following tasks: ● Print ● Use the HP Internal Print Server ● Replace a substrate roll ● Service the printer or replace printer components ● Ensure the printer is well ventilated Your printer has the following dimensions: Table 2-9 LX820 & LX850 physical specifications Doors closed1 Doors open2
  • HP Latex 850 | Site Preparation Guide - Page 19
    area for materials When planning a storage area for materials used with the printer, thought should not only be given to safety and convenience, but also Computer and networking requirements LAN and switch requirements To use CallMe@HP for remote support, you need one of the following: ● A direct,
  • HP Latex 850 | Site Preparation Guide - Page 20
    half-duplex), there will be no communication. RIP requirements There are two RIPs offered by HP that may be used with the printer: ● HP Scitex Onyx RIP (Production House): product number CQ756A ● HP Scitex Caldera RIP (GrandRIP+): product number CQ755A The software and hardware requirements of these
  • HP Latex 850 | Site Preparation Guide - Page 21
    with the latest service pack ◦ Windows 7 Business or Enterprise 32-bit and 64-bit with the latest service pack HP Scitex Onyx X10 RIP support.php?page=operating_system ● http://www.caldera.eu/docs/Datasheet_GrandRIP+_UK.pdf External color profiling In order to build color profiles for your printer
  • HP Latex 850 | Site Preparation Guide - Page 22
    During the installation training, it is the customer's responsibility to have a RIP specialist available to create color profiles. Site preparation 18 Chapter 2 Site preparation ENWW
  • HP Latex 850 | Site Preparation Guide - Page 23
    to be designated that will be easily accessible to the delivery truck. This will require sufficient space to unload the large crate in which your printer is shipped. When planning this area, consider the following: ● Height and width of entrance to unloading area ● Ramps used to access the unloading
  • HP Latex 850 | Site Preparation Guide - Page 24
    crate and printer are as follows: Table 3-2 LX850/LX820 printer and crate physical specifications Length Width Height Weight Crate Printer 5.86 m printer and all system components is the customer's responsibility and not HP of your printer. Advanced booking for the services of a machinery
  • HP Latex 850 | Site Preparation Guide - Page 25
    Arrival preparation ● Two skates to move the crate (optional) ● Electric pallet jack (optional) ENWW Moving equipment 21
  • HP Latex 850 | Site Preparation Guide - Page 26
    ● Manual pallet jack (optional) Arrival preparation Above ground floor installation CAUTION: Unloading and moving the printer and all system components is the responsibility of the customer and not HP. Failure to provide the required moving and lifting equipment could result in personal injury or
  • HP Latex 850 | Site Preparation Guide - Page 27
    bars and spreader beam must be long enough so that the lift cables do not touch the printer. The following graphic illustrates how to lift the printer with a spreader beam. CAUTION: When lifting the printer with a crane, extra caution should be taken to ensure that the cables do not apply pressure
  • HP Latex 850 | Site Preparation Guide - Page 28
    Arrival preparation Waste disposal You must dispose of the crate and packaging material that comes with the printer. Most of the waste will be wood materials. 24 Chapter 3 Shipment arrival preparation ENWW
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Latex 850 & 820
SCITEX LX850 & LX820 Printers
Site preparation guide