HP M5035x HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim
HP M5035x - LaserJet MFP B/W Laser Manual
UPC - 882780574830
View all HP M5035x manuals
Add to My Manuals
Save this manual to your list of manuals |
HP M5035x manual content summary:
- HP M5035x | HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim - Page 1
M3027/3035 MFP, M4345 MFP, M5025/5035 MFP, CM4730 MFP, DS9200C, and DS9250C. The latest firmware releases for many LaserJet MFPs and digital : A change was made for manufacturing after release. Firmware obtained from hp.com may be lower by one in the last digit when compared to new units. The two - HP M5035x | HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim - Page 2
be configured via the control panel, the EWS (Embedded Web Server), or WJA (Web Jetadmin). Detailed Instructions: HP recommends using the EWS or WJA to configure the device. Both of these methods allow the user to verify the start and end dates for Daylight Saving Time. The device can be configured - HP M5035x | HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim - Page 3
There are normally four tabs across the top. If only the Information tab is visible (as above), you must Log In, using the device's EWS password. Click on the Settings tab, then select Date & Time from the left side: Page 3 of 9 white paper - HP M5035x | HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim - Page 4
The Date & Time screen will appear, as shown below. The MFP's date and time settings are displayed, and can be changed from this screen. The currently configured time zone is displayed, but cannot be changed from this screen. The firmware versions listed in the Release 1 column in the table will - HP M5035x | HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim - Page 5
Click on the Advanced button at the bottom to access the Date & Time - Advanced screen: Page 5 of 9 white paper - HP M5035x | HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim - Page 6
Select your time zone from the Time Zone drop-down menu. Check the Automatically adjust clock for daylight saving changes box Note: Your settings will not be effective until you click OK at the lower right. After clicking OK, you will return to the Date & Time screen. Click Advanced to return to the - HP M5035x | HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim - Page 7
The correct Daylight Saving Time start and end dates will be displayed for your selected time zone. Caution: If you did not click OK after selecting your time zone, the Start and End Dates will reflect the previously selected time zone. Using WJA: The screenshot below is the Configuration screen for - HP M5035x | HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim - Page 8
would be to set custom dates and times. The Daylight Saving/Summer Time On checkbox is not used with these firmware revisions. It was only used with one prior MFP firmware revision. Setting via the control panel: The Time Zone screen can is located under Administration/Time Scheduling/ on Mseries - HP M5035x | HP LaserJet MFPs and Digital Senders - Automatic Daylight Saving Tim - Page 9
Release 1 displays the Time Zone screen, but the user could select Cancel. This leaves the time zone possibility (less than 10% on the M3027/3035 MFP and DS9250C; much lower on other listed products) and the time zone may not be set correctly. HP strongly recommends using the EWS or WJA for setting
white paper
LaserJet MFPs and
Digital Senders
-
Automatic Daylight Saving
Time adjustment
Security Level:
Public
Date Written/Updated:
October 24, 2007
Document Summary
This document describes the automatic Daylight Saving Time enhancement in LaserJet MFPs.
The
feature is included in the latest firmware for the following models:
LJ4345mfp, CLJ4730mfp,
LJ9040/9050mfp, CLJ9500mfp, M3027/3035 MFP, M4345 MFP, M5025/5035 MFP,
CM4730 MFP, DS9200C, and DS9250C.
The latest firmware releases for many LaserJet MFPs and digital senders include
automatic Daylight Saving Time adjustment.
The products below have the enhancement
in the firmware releases listed.
Release 1 has the basic functionality. Release 2 contains
additional fixes listed at the end of this document.
Newer releases (higher numbers)
will include the feature.
Product
Release 1*
Release 2
4345mfp
09.081.5
09.091.4
9050mfp
08.081.5
08.091.3
4730mfp
46.161.6
46.171.3
9500mfp
08.081.5
08.091.3
M3027/3035 MFP
48.031.6
48.041.3
M4345 MFP
48.031.7
48.041.4
M5025/5035 MFP
48.031.7
48.041.4
CM4730 MFP
50.011.6
50.021.4
DS9200C
09.081.4
09.091.4
DS9250C
48.021.6
48.031.3
*Note:
A change was made for manufacturing after release.
Firmware obtained from
hp.com may be lower by one in the last digit when compared to new units.
The two
firmware versions are functionally identical.
Page 1 of 9
white paper