HP MSA 2040 HP MSA Contoller Module Installation Instructions (590339-005, Jun
HP MSA 2040 Manual
 |
View all HP MSA 2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP MSA 2040 manual content summary:
- HP MSA 2040 | HP MSA Contoller Module Installation Instructions (590339-005, Jun - Page 1
HP MSA enclosures. About this document • The Storage Management Utility (SMU) and the Command Line Interface (CLI) can be used to manage the enclosure. Tasks in this document demonstrate using the SMU. • For the latest product documentation, see the HP website at http://www.hp.com/support/manuals - HP MSA 2040 | HP MSA Contoller Module Installation Instructions (590339-005, Jun - Page 2
NOTE: The illustration is for reference only. In a single-controller system, remove the air management module from module A, top location. Enabling Partner Firmware Update (dual-controller configurations only) In a dual-controller configuration, the Partner Firmware Update option ensures that both - HP MSA 2040 | HP MSA Contoller Module Installation Instructions (590339-005, Jun - Page 3
about cabling and configuring the system, see the user guide. Additional information HP P2000/MSA Disk Arrays: http://www.hp.com/ go/msa HP storage: http://www.hp.com/storage HP support: http://www.hp.com/support HP documents: http://www.hp.com/support/manuals. For troubleshooting, on the manuals
-
1 -
2 -
3
 |
 |
HP MSA Controller Module
Installation Instructions
Abstract
This document details procedures for installing a controller
module in HP MSA enclosures.
© Copyright 2009, 2013 Hewlett-Packard Development Company, L.P.
Printed in the US.
*590339-005*
HP Part Number: 590339-005
Published: June 2013
Edition: 5
About this document
•
The Storage Management Utility (SMU) and the
Command Line Interface (CLI) can be used to
manage the enclosure. Tasks in this document
demonstrate using the SMU.
•
For the latest product documentation, see the HP
website at
h
t
tp://w
w
w
.hp
.co
m/su
ppo
r
t/man
uals
.
Under the storage banner, navigate to the page
for your storage enclosure.
Before you begin
Observe the following:
CAUTION:
•
Removing a module from an operational
enclosure significantly changes air flow
within the enclosure. Openings must be
populated for the enclosure to cool
properly. Leave modules in the enclosure
until a replacement is available.
•
Parts can be damaged by electrostatic
discharge; use proper anti-static protection.
Keep parts in electrostatic containers until
needed and ensure you are properly
grounded when touching static-sensitive
components.
IMPORTANT:
When two controllers are
installed in an enclosure, they must be the same
model. Mixing controller types in the same
enclosure is not supported.
NOTE:
To reduce impact on system
performance, perform all maintenance tasks
during periods of low system activity or during
a system maintenance window.
Page 1