HP Mini 1117TU HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid
HP Mini 1117TU Manual
View all HP Mini 1117TU manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Mini 1117TU manual content summary:
- HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 1
HP Mini 1000 Netbook Compaq Mini 700 Netbook Maintenance and Service Guide - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 3
the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 4
iv Safety warning notice - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 5
...22 Sequential part number listing ...24 4 Removal and replacement procedures Preliminary replacement requirements 29 Tools required ...29 Service considerations ...29 Plastic parts ...29 Cables and connectors 29 Drive handling 30 Grounding guidelines ...31 Electrostatic discharge damage 31 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 6
32 Equipment guidelines 33 Unknown user password 34 Component replacement procedures 35 Service tag ...35 Device feet ...36 Battery ...37 Memory , WSVGA, AntiGlare display specifications 77 Hard drive specifications ...78 Solid-state drive specifications ...79 System DMA specifications - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 7
System interrupt specifications ...80 System I/O address specifications ...81 System memory map specifications 83 7 Screw listing Phillips PM1.6×2.5 screw ...84 Phillips PM1.6×4.0 screw ...85 Phillips PM1.6×6.0 screw ...86 Phillips PM2.0×3.0 screw ...87 Phillips PM2.0×4.5 screw ...91 Phillips PM2 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 8
viii - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 9
Chipset Graphics Panels Memory Description HP Mini 1000 Netbook HP Mini 1000 Netbook √ Compaq Mini 700 Netbook Intel® Atom™ N270 accessible/upgradable memory √ module slot Supports up to 1 GB of system memory √ PC2-4200, 533-MHz, DDR2 √ Supports the following configurations: ● 512- - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 10
equipped with a solid-state drive also support the HP Mini Mobile Drive Bay Supports all 4.57-cm (1.8-inch) parallel ATA √ (PATA) hard drives (optional) Configuration: 60-GB, 4200-rpm Supports external USB optical drives only √ Supports external USB diskette drives only √ High-definition - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 11
requirements 30-W UMA AC adapter (non-smart) with localized √ cable plug support AC adapter connector on cable √ 3-cell lithium-polymer (Li-Pol) battery DVD Serviceability End-user replaceable parts: AC adapter √ Battery (system) √ Memory module √ HP Mini Mobile Drive √ Compaq Mini - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 12
2 External component identification Top components Display Item (1) (2) (3) (4) Component Internal display switch Speakers (2) Internal microphone Webcam Function Turns off the display if the display is closed while the power is on. Produce sound. Records and captures sound. Captures still - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 13
to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region. To access these notices, click Start > Help and Support > User Guides. Top components 5 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 14
Keys Item (1) (2) (3) (4) (5) Component esc key Function keys fn key Windows logo key Windows applications key Function Displays system information when pressed in combination with the fn key. Execute frequently used system functions when pressed in combination with the fn key. Executes - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 15
is on. ● Amber: TouchPad is off. Functions like the left button on an external mouse. Moves the pointer and selects or activates items on the screen. Scrolls up or down. Functions like the right button on an external mouse. * This table describes factory settings. To view or change pointing device - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 16
off the device. To learn more about your power settings, select Start > Control Panel > Performance and Maintenance > Power Options. Blinking: The hard drive or flash drive is being accessed. ● On: A battery is charging. ● Blinking: A battery that is the only available power source has reached a low - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 17
during routine operation. Supports the following optional digital card formats: ● MultiMediaCard (MMC) ● Secure Digital (SD) Memory Card Connects an optional USB device. HP Mini Mobile Drive Bay (on models equipped with Connects an optional HP Mini Mobile Drive. a solid-state drive) Security cable - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 18
Left-side components Item (1) (2) (3) (4) (5) (6) (7) Component Function Power connector Power connector light Connects an AC adapter. ● On: The device is running on AC power. ● Off: The device is running on battery power. USB port Vent Connects an optional USB device. Enables airflow to cool - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 19
Bottom components Item (1) (2) (3) Component Battery bay Battery release latches (2) Memory module compartment (4) Vent Function Holds the battery. Release the battery from the battery bay. Contains the memory module slot. NOTE: The release latch for the memory module compartment cover (not - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 20
provides information that may be needed when troubleshooting system problems. The service tag provides the following information: (1) Product service technician to determine what components and parts are needed. (4) Model description: This is the number used to locate documents, drivers, and support - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 21
1000) 8.9-inch WSVGA BrightView (Compaq Mini 700) 10.1-inch standard-definition AntiGlare (HP Mini 1000) 10.1-inch standard-definition AntiGlare (red-colored HP Mini 1000) 10.1-inch standard-definition AntiGlare (Compaq Mini 700) 10.2-inch WSVGA AntiGlare (HP Mini 1000) 507309-001 508638-001 507312 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 22
504611-xx1 For use with red-colored HP Mini 1000 models only 509650-xx1 Top cover (includes TouchPad) 504612-001 Mass storage devices NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket. Hard drive (select models only): 60-GB, 4200-rpm - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 23
) HP Mini Mobile Drive Bay cover Memory module compartment cover SD Card Reader slot bezel Security cable connector For the HP Mini 1000 and Compaq Mini 700 507317-001 For the red-colored HP Mini 1000 512192-001 RTC battery 507707-001 System board (includes processor and replacement - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 24
Item (16) Description Battery (3-cell, 26-Wh Li-Pol) For the HP Mini 1000 and Compaq Mini 700 For the red-colored HP Mini 1000 (for use in all countries and regions except Germany) For the red-colored HP Mini 1000 (for use in Germany only) Spare part number 504610-001 512851-001 512851-002 16 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 25
. The complete display assembly is available as spare part number 509696-001 for the red-colored HP Mini 1000 or 507312-001 for all other models of the HP Mini 1000. NOTE: 10.2-inch display assembly components are not sold separately. The complete display assembly is available as spare part number - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 26
; includes WWAN 515209-001 (8) Display enclosure (includes logo) For use with 8.9-inch panels on the HP Mini 1000 504595-001 For use with 8.9-inch, 10.1-inch, and 10.2-inch panels on the Compaq Mini 700 509702-001 Display Rubber Kit (not illustrated) For use with all 8.9-inch panels 509699 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 27
Cable Kit Item Description Cable Kit: (1) SIM card cable (2) Power cable (3) Internal display switch module (4) Bluetooth cable (5) USB cable Spare part number 507708-001 Cable Kit 19 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 28
part kit includes a cable and bracket. Item Description Mass storage devices: (1) Hard drive (select models only): 60-GB, 4200-rpm Hard Drive Hardware Kit (not illustrated) (2) Solid-state drive 16-GB 8-GB Spare part number 504601-001 504607-001 507314-001 507313-001 20 Chapter 3 Illustrated - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 29
Plastics Kit Item Description Plastics Kit: For the HP Mini 1000 and Compaq Mini 700 For the red-colored HP Mini 1000 (1) Memory module compartment cover (2) HP Mini Mobile Drive Bay cover (3) Security cable connector (4) SD Card Reader slot bezel Spare part number 507317-001 512192-001 Plastics - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 30
bracket ● WWAN connector bracket 507318-001 HP Mini Mobile Drive (supported on models equipped with a solid-state drive and HP Mini Mobile Drive Bay) 2-GB 512329-001 4-GB 512330-001 8-GB HP Mini Sleeve For the HP Mini 1000 For the red-colored HP Mini 1000 512331-001 512321-001 511844-001 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 31
Description Screw Kit ● Phillips PM1.6×2.5 screw ● Phillips PM1.6×4.0 screw ● Phillips PM1.6×6.0 screw ● Phillips PM2.0×3.0 screw ● Phillips PM2.0×4.5 screw ● Phillips PM2.5×5.0 screw ● Phillips PM2.5×7.0 screw 30-W UMA AC adapter For use in all countries and regions except Germany For use in - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 32
only) 490371-D61 Power cord for use in India (HP Mini 1000 only) 496813-001 30-W UMA AC adapter for use in all countries and regions except Germany 504592-001 System board equipped with 1.6-GHz processor (includes replacement thermal material) 504593-001 Broadcom 4312 802.11/b/g WLAN module - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 33
memory module (PC2-4200, 533-MHz, DDR2) 504601-001 60-GB, 4200-rpm hard drive (includes cable and bracket) 504607-001 Hard Drive Hardware Kit 504610-001 3-cell, 26-Wh Li-Pol battery for the HP Mini 1000 and Compaq Mini 700 504611-001 Keyboard for use in the United States 504611-031 Keyboard for - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 34
1 speaker box, and 2 WLAN antenna transceivers/cables; WWAN is optional) 8-GB solid-state drive (includes cable and bracket) 16-GB solid-state drive (includes cable and bracket) Plastics Kit for the HP Mini 1000 and Compaq Mini 700 (see Plastics Kit on page 21 for more Plastics Kit spare part number - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 35
HP Mini Sleeve for the HP Mini 1000 HP Mini Mobile Drive, 2-GB HP Mini Mobile Drive, 4-GB HP Mini Mobile Drive, 8-GB 3-cell, 26-Wh Li-Pol battery for the red-colored HP Mini HP Mini 1000 (for use in Germany only) 30-W UMA AC adapter (for use in Germany only) Heat sink assembly (includes replacement - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 36
Display Cable Kit with WLAN for use with 10.1-inch panels on the Compaq Mini 700 (includes microphone assembly and display/webcam cable) Display Cable Kit with WWAN for use with ). 2048-MB memory module (PC2-4200, 533-MHz, DDR2) for the HP Mini 1000 only 28 Chapter 3 Illustrated parts catalog - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 37
removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers Service considerations The only at the points designated in the maintenance instructions. Cables and connectors CAUTION: When servicing the device, be sure that cables are placed - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 38
with at least one inch of shock-proof foam. Avoid dropping drives from any height onto any surface. After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag. Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 39
V 700 V 11,500 V 4,000 V 14,500 V 5,000 V 26,500 V 20,000 V 21,000 V 11,000 V 55% 7,500 V 3,000 V 400 V 400 V 2,000 V 3,500 V 7,000 V 5,000 V Preliminary replacement requirements 31 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 40
properly grounded work surface and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ● When fixtures must directly contact inserting or removing connectors or test equipment. 32 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 41
of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic Floor mats Voltage protection level 1,500 V 7,500 V 5,000 V Preliminary replacement requirements 33 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 42
Unknown user password If the device you are servicing has an unknown user password, follow these real-time clock (RTC) battery (see RTC battery on page 52). 6. Wait approximately 5 minutes. 7. Replace the RTC battery and reassemble the device. 8. Connect AC power to the device. Do not reinsert any - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 43
note of each screw size and location during removal and replacement. Service tag The service tag, affixed to the bottom of the device, provides information that may be needed when troubleshooting system problems. The service tag provides the following information: (1) Product name: This is the - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 44
Device feet The device feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number 504613-001. There are 4 rubber feet that are installed on the base enclosure in the locations illustrated below. 36 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 45
all countries and regions except Germany) 3-cell, 26-Wh Li-Pol battery for the red-colored HP Mini 1000 (for use in Germany only) Spare part number 504610-001 512851-001 512851-002 Before The battery release latch automatically locks the battery into place. Component replacement procedures 37 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 46
Mini 1000 or 507317-001 for all other models of the HP Mini 1000 and the Compaq Mini 700. 3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the device.) 38 Chapter 4 Removal and replacement - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 47
4. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. Component replacement procedures 39 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 48
For use with standard device models Spare part number 504611-xx1 Description For use with red-colored HP Mini 1000 models only Spare part number 509650-xx1 Before removing the keyboard, follow these steps: 1. 3. Open the device as far as possible. 40 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 49
(ZIF) connector (1) to which the keyboard cable is attached. 6. Disconnect the cable (2), and then remove the keyboard. Reverse this procedure to install the keyboard. Component replacement procedures 41 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 50
top of the hard drive. 3. Release the low insertion force (LIF) connector (1) to which the hard drive cable is attached. 4. Disconnect the hard drive cable (2). 5. Remove the two Phillips PM2.0×4.5 screws (3) that secure the hard drive to the device. 42 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 51
and slide it out of the drive bay. Reverse this procedure to install the hard drive. To remove the solid-state drive: 1. Release the ZIF connector (1) to which the SIM card cable is attached. The end of the cable lies across the top of the solid-state drive. 2. Disconnect the SIM card cable (2), and - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 52
the drive bracket (4) from the drive bay. 7. Remove the three Phillips PM2.0×3.0 screws (1) that secure the solid-state drive to the bracket. 8. Remove the solid-state drive (2) from the bracket. Reverse this procedure to install the solid-state drive. 44 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 53
(see Battery on page 37). 5. Remove the keyboard (see Keyboard on page 40). 6. Remove the hard drive or solid-state drive (see Mass storage devices on page 42). 1. Turn the device upside down, with the front toward device right-side up, with the front toward you. Component replacement procedures 45 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 54
rest against the display assembly (2) at an angle. 8. Release the ZIF connector (1) to which the TouchPad button board cable is connected. 46 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 55
9. Disconnect the TouchPad button board cable (2) from the system board, and then remove the top cover. Reverse this procedure to install the top cover. Component replacement procedures 47 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 56
from the device. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 42) c. Top cover (see Top cover on page 45) 48 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 57
the slot at an angle. NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion. Reverse this procedure to install the WLAN module. Component replacement procedures 49 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 58
from the device. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 42) c. Top cover (see Top cover on page 45) 50 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 59
the slot at an angle. NOTE: WWAN modules are designed with a notch (5) to prevent incorrect insertion. Reverse this procedure to install the WWAN module. Component replacement procedures 51 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 60
Battery on page 37). 5. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 42) c. Top cover (see Top cover on page 45) Remove procedure to install the RTC battery. 52 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 61
on page 37). 5. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 42) c. Top cover (see Top cover on page 45) . Reverse this procedure to install the Bluetooth module. Component replacement procedures 53 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 62
Battery on page 37). 5. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 42) c. Top cover (see Top cover on page 45) When replacing the system board, be sure that the following components are removed from the - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 63
the Bracket Kit, spare part number 507318-001. 6. Remove the two Phillips PM2.0×3.0 screws (1) that secure the USB connector bracket to the base enclosure. Component replacement procedures 55 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 64
7. Remove the USB connector bracket (2). NOTE: The USB connector bracket is included in the Bracket Kit, spare part number 507318-001. 8. Remove the Phillips PM2.0×4.5 screw that secures the system board to the base enclosure. 56 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 65
NOTE: The heat sink assembly spare part kit includes replacement thermal material. Description Heat sink assembly Spare part number Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 42) c. Top cover (see Top - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 66
is removed. Thermal paste is used on the processor (1), the heat sink section (2) that services the processor, the Northbridge chip (3), and the heat sink section (4) that services the Northbridge chip. Replacement thermal material is included with all heat sink assembly and system board spare part - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 67
Battery on page 37). 5. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 42) c. Top cover (see Top cover on page 45) screw (2) that secure the fan to the base enclosure. Component replacement procedures 59 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 68
3. Remove the fan (3). Reverse this procedure to install the fan. 60 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 69
(see Battery on page 37). 5. Remove the following components: a. Keyboard (see Keyboard on page 40). b. Hard drive (see Mass storage devices on page 42). c. Top cover (see Top cover on page 45). d. Fan (see bracket (1) and USB board (2) from the base enclosure. Component replacement procedures 61 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 70
SIM card cable is attached to the battery bay with tape. Reverse this procedure to install the USB board. If it is necessary to replace the internal display switch module, perform the following steps: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the internal display switch bracket to the - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 71
(see Battery on page 37). 5. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 42) c. Top cover (see Top cover on page 45) CAUTION: Support the display assembly when removing the following screws. Failure to - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 72
2. Remove the display assembly (2). 3. If it is necessary to replace the speaker assembly, perform the following steps: a. Squeeze the sides of the speaker 509700-001 for all 8.9-inch panels or 515211-001 for 10.1-inch panels (Compaq Mini 700 only). 64 Chapter 4 Removal and replacement procedures - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 73
in the Display Hinge Kit, spare part number 504596-001 for all 8.9-inch panels or 515207-001 for 10.1-inch panels (Compaq Mini 700 only). 5. If it is necessary to replace the display bezel, perform the following steps: a. Flex the inside edges of the bottom (1), left and right sides (2), and the top - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 74
part numbers for the 8.9-inch display bezels are 506333-001 (HP Mini 1000) and 509701-001 (Compaq Mini 700). The spare part number for the 10.1-inch display bezel is 509704-001 (Compaq Mini 700 only). 6. If it is necessary to replace the webcam module, perform the following steps: a. Open the tab - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 75
module is available as spare part number 504594-001 for all 8.9-inch panels or 515213-001 for 10.1-inch panels (Compaq Mini 700 only). 7. If it is necessary to replace the display panel, perform the following steps: a. Remove the nine Phillips PM2.0×3.0 screws that secure the display panel to the - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 76
. An 8.9-inch display panel for the HP Mini 1000 and the Compaq Mini 700 is available as spare part number 509698-001. A 10.1-inch display panel for the Compaq Mini 700 only is available as spare part number 509703-001. 8. If it is necessary to replace the display panel brackets, perform the - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 77
9. If it is necessary to replace the wireless antenna transceivers and cables, detach the WLAN) or 504598-001 (with WWAN). The wireless antenna transceivers and cables for 10.1-inch panels (Compaq Mini 700 only) are available in the Display Cable Kit, spare part number 515208-001 (with WLAN) or - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 78
on or restart the device, and then press f10 while the "F10 = BIOS Setup Options" message is displayed in the lower-left corner of the screen. Using the Setup Utility Changing the language of the Setup Utility The following procedure explains how to change the language of the Setup Utility. If - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 79
Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are by keystroke. ● To choose "F10 = BIOS Setup Options" message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Exit > Load Setup Defaults, and then press - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 80
this section provide an overview of Setup Utility options. NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your device. Main menu Select System information To do this ● View and change the system time and date. ● View identification information about the - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 81
System Configuration menu Select Language Support Processor C4 State Boot Options To do this for: ◦ Internal hard drive (select models only) ◦ USB Floppy ◦ USB CD/DVD ROM Drive ◦ USB Diskette on Key ◦ USB Hard drive ◦ USB Card Reader ◦ Network adapter Diagnostics menu Select Hard Disk Self Test - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 82
Metric U.S. Dimensions Depth 16.67 cm 6.56 in Width 26.17 cm Height 2.52 cm Weight 10.2-in. LCD, equipped with a 3-cell battery, 60-GB hard drive, 1.11 kg 1-GB memory, WLAN module, and 2 wireless antennae 10.30 in 0.99 in 2.45 lb 10.2-in. LCD, equipped with a 3-cell battery, 8-GB solid - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 83
8.9-inch, WSVGA, BrightView display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 11.34 cm 19.51 cm 22.61 cm 262,144 300:1 ( - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 84
10.1-inch, standard-definition, AntiGlare display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 23.45 cm 14.30 cm 25.55 cm 262, - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 85
10.2-inch, WSVGA, AntiGlare display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 12.53 cm 22.27 cm 25.55 cm 262,144 400:1 ( - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 86
Operating temperature * 1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. 78 Chapter 6 Specifications - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 87
Solid-state drive specifications Performance Transfer modes supported Sustained read Sustained write Characteristics Interface MLC NAND flash capacity Electrical specifications DC supply voltage Standby current Active current Environmental specifications Operating temperature Storage temperature - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 88
/g WLAN no. 2 Intel 82801G (ICH7 Family) PCI Express Root Port-27D0 Intel 82801G (ICH7 Family) USB Universal Host Controller-27CB Microsoft UAA Bus Driver for High Definition Audio Mobile Intel 945 Express Chipset Family Intel 82801G (ICH7 Family) PCI Express Root Port-27D2 Intel 82801G (ICH7 Family - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 89
System I/O address specifications I/O address (hex) 000 - 00F 000 - CF7 010 - 01F 020 - 021 022 - 03F 040 - 043 044 - 05F 060 - 060 061 - 061 062 - 062 063- 063 064 - 064 065 - 065 066 - 066 067 - 06F 070 - 071 072 - 07F 080 - 080 081 - 083 084 - 086 087 - 087 088 - 088 089 - 08B 08C - 08E 08F - - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 90
I/O address (hex) 279 - 279 3B0 - 3BB 3C0 - 3DF 3F6 - 3F6 400 - 41F 480 - 4BF 4D0 - 4D1 500 - 501 800 - 87F A79 - A79 0D00 - FFFF D480 - D49F D800 - D81F D880 - D89F DC00 - DC1F DC80 - DC87 E000 - EFFF FFA0 - FFAF System function (shipping configuration) ISAPNP Read Data Port Mobile Intel® 945 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 91
resources PCI bus Mobile Intel 945 Express Chipset Family Intel 82801G (ICH7 Family) USB2 Enhanced Host Controller-27CC Microsoft® UAA Bus Driver for High Definition Audio Mobile Intel 945 Express Chipset Family Mobile Intel 945 Express Chipset Family Intel 82801G (ICH7 Family) PCI Express - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 92
-001; or in the Display Screw Kit, spare part number 509700-001 for all 8.9-inch panels or 515211-001 for 10.1-inch panels (Compaq Mini 700 only). Phillips PM1.6×2.5 screw Color Silver Quantity 4 Length 2.5 mm Thread 1.6 mm Head diameter 3.0 mm Where used: Two screws that secure the power and - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 93
Where used: Two screws that secure the heat sink to the system board Phillips PM1.6×4.0 screw Color Silver Quantity 1 Length 4.0 mm Thread 1.60 mm Head diameter 3.5 mm Where used: One screw that secures the keyboard to the device Phillips PM1.6×4.0 screw 85 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 94
Phillips PM1.6×6.0 screw Color Black Quantity 1 Length 6.0 mm Thread 1.60 mm Head diameter 3.5 mm Where used: One screw that secures the keyboard to the device 86 Chapter 7 Screw listing - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 95
Color Black Quantity 24 (WLAN only) 25 (with WWAN) Length 3.0 mm Thread 2.0 mm Head diameter 4.0 mm Where used: Three screws that secure the solid-state drive to its bracket Where used: One screw that secures the WLAN module to the system board Phillips PM2.0×3.0 screw 87 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 96
Where used: One screw that secures the WWAN connector bracket to the system board Where used: Two screws that secure the USB connector bracket to the system board Where used: One screw that secures the fan to the base enclosure 88 Chapter 7 Screw listing - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 97
Where used: One screw that secures the DC jack bracket to the base enclosure Where used: One screw that secures the internal display switch bracket to the base enclosure Where used: Two screws that secure the webcam module to the display enclosure Phillips PM2.0×3.0 screw 89 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 98
Where used: Nine screws that secure the display panel to the display enclosure Where used: Four screws that secure the left and right display panel brackets to the display panel 90 Chapter 7 Screw listing - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 99
Phillips PM2.0×4.5 screw Color Silver Quantity 10 Length 4.5 mm Thread 2.0 mm Head diameter 4.0 mm Where used: Two screws that secure the hard drive to the device Where used: Two screws that secure the solid-state drive bracket to the device Phillips PM2.0×4.5 screw 91 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 100
Where used: One screw that secures the top cover to the device Where used: One screw that secures the fan and DC jack bracket to the base enclosure Where used: Two screws that secure the speaker assembly to the display enclosure 92 Chapter 7 Screw listing - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 101
Where used: Four screws that secure the display hinges to the display assembly Phillips PM2.5×5.0 screw Color Silver Quantity 4 Length 5.0 mm Thread 2.5 mm Head diameter 4.5 mm Where used: Four screws that secure the display assembly and top cover to the device Phillips PM2.5×5.0 screw 93 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 102
Phillips PM2.5×7.0 screw Color Black Quantity 4 Length 7.0 mm Thread 2.5 mm Head diameter 4.0 mm Where used: Four screws that secure the top cover to the base enclosure 94 Chapter 7 Screw listing - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 103
files that you have previously backed up. HP recommends that you use the Windows backup utility to create a hard drive backup as soon as you set up The Windows backup utility backs up only data files. The operating system, drivers, and programs are located on the operating system disc and the System - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 104
screen image is added to the document. 4. Save the document. Backing up individual files or folders You can back up individual files or folders to an optional external hard drive or to a network drive , and then click Next. 4. Follow the on-screen instructions. 96 Chapter 8 Backup and recovery - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 105
screen instructions. Creating recovery points When you back up system modifications since your last backup, you are creating system recovery points. This allows you to save a snapshot of your hard drive make copies of changes made after that time. HP recommends that you create recovery points at the - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 106
> All Programs > Accessories > System Tools > Backup. The Backup or Restore Wizard page opens. 3. Click Restore files and settings, and then click Next. 4. Follow the on-screen instructions. 98 Chapter 8 Backup and recovery - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 107
9 Connector pin assignments Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground Audio-in (microphone) 99 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 108
RJ-45 (network) Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground 100 Chapter 9 Connector pin assignments - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 109
10 Power cord set requirements The wide range input feature of the device permits it to operate from any line voltage from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the device meets the requirements for use in the country or region where the - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 110
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 111
remove these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that site at http://www.eiae.org. This section provides disassembly instructions for the display assembly. The display assembly must be disassembled - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 112
Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 113
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel assembly upside - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 114
10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel right-side up. 106 Chapter - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 115
15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 17. Remove the - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 116
18. Remove the backlight from the backlight frame. 19. Disconnect the display panel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 117
-side 10 pointing device 7 right-side 9 top 4 TouchPad 7 wireless antennae 5 connectors power 10 service considerations 29 D device feet locations 36 spare part number 36 device specifications 74 diskette drive precautions 30 product description 2 display assembly removal 63 spare part number 13, 26 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 118
part number 14, 25, 42 specifications 78 Hard Drive Hardware Kit, spare part number 14, 25 headphone jack location 10 pin assignments 99 heat sink assembly removal 57 spare part number 57 HP Mini Mobile Drive Bay, location 9 HP Mini Mobile Drive, spare part number 22 I I/O address specifications 81 - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 119
flash storage drive 2 graphics 1 hard drive 2 internal media cards 2 keyboard 3 mass storage device 2 memory module 1 modem 2 operating system 3 optical drive 2 panels 1 pointing device 3 ports 2 power requirements 3 processors 1 product name 1 security 3 serviceability 3 solid-state drive 2 webcam - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 120
Windows applications key 6 Windows logo key 6 wireless antenna locations 5 removal 69 spare part number 18, 69 wireless antenna components 5 wireless light 8 wireless module, product description 2 wireless switch 8 WLAN module removal 48 spare part number 14, 24, 48 workstation guidelines 32 WWAN - HP Mini 1117TU | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 121
HP Mini 1000 Netbook
Compaq Mini 700 Netbook
Maintenance and Service Guide