HP OMEN Obelisk Desktop PC 875-0000 Upgrading the top fan
HP OMEN Obelisk Desktop PC 875-0000 Manual
![]() |
View all HP OMEN Obelisk Desktop PC 875-0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP OMEN Obelisk Desktop PC 875-0000 manual content summary:
- HP OMEN Obelisk Desktop PC 875-0000 | Upgrading the top fan - Page 1
OMEN by HP and HP ENVY Desktop PCs Upgrading the top fan On many OMEN by HP and HP ENVY Desktop PCs, you can install a 120 mm × 120 mm top fan. Install the top fan Use this procedure to install the top fan into the computer. 1. Remove the left side access panel. 2. Position the computer on its side. - HP OMEN Obelisk Desktop PC 875-0000 | Upgrading the top fan - Page 2
5. Remove the bracket from the computer. 6. Insert a Philips screwdriver into the plus signs (+) on each fan plate, and then twist the screwdriver to release the four plates from the bracket. CAUTION: To prevent injury, use gloves when performing this procedure. The fan plates can have sharp edges. - HP OMEN Obelisk Desktop PC 875-0000 | Upgrading the top fan - Page 3
11. Install the left side access panel. Install the top fan 3
![](/manual_guide/products/hewlettpackard-omen-obelisk-desktop-pc-8750000-upgrading-fan-b3beb82/1.png)
OMEN by HP and HP ENVY Desktop PCs -
Upgrading the top fan
On many OMEN by HP and HP ENVY Desktop PCs, you can install a 120 mm × 120 mm top fan.
Install the top fan
Use this procedure to install the top fan into the computer.
1.
Remove the left side access panel.
2.
Position the computer on its side.
3.
Find the top fan bracket on the inside top of the computer.
4.
Remove the two screws that secure the bracket.
OMEN by HP and HP ENVY Desktop PCs - Upgrading the top fan
1