HP ProBook 4410s Memory Modules - Linux
HP ProBook 4410s - Notebook PC Manual
View all HP ProBook 4410s manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ProBook 4410s manual content summary:
- HP ProBook 4410s | Memory Modules - Linux - Page 1
Memory Modules User Guide - HP ProBook 4410s | Memory Modules - Linux - Page 2
such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: April 2009 Document Part Number: 536505-001 Product notice This user guide describes features - HP ProBook 4410s | Memory Modules - Linux - Page 3
Table of contents Adding or replacing memory modules Index ...10 iii - HP ProBook 4410s | Memory Modules - Linux - Page 4
iv - HP ProBook 4410s | Memory Modules - Linux - Page 5
to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic - HP ProBook 4410s | Memory Modules - Linux - Page 6
7. Remove the screws from the battery area. Your computer has either 2 or 3 screws that need to be removed. NOTE: Refer to the illustration that most closely matches your computer. 2 Adding or replacing memory modules - HP ProBook 4410s | Memory Modules - Linux - Page 7
8. Turn the computer display-side up, and then remove the 2 screws from the back edge of the computer. 9. Open the computer as far as possible. 10. Slide the switch cover straight back towards the display, and then remove the switch cover. 3 - HP ProBook 4410s | Memory Modules - Linux - Page 8
. 12. Slide the keyboard (1) towards the display assembly, and then turn the keyboard upside down (2) to expose the memory compartment. 13. If you are replacing a memory module, remove the existing memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges - HP ProBook 4410s | Memory Modules - Linux - Page 9
module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 14. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the - HP ProBook 4410s | Memory Modules - Linux - Page 10
c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 15. Turn over the keyboard (1) into the keyboard tray, and then slide the keyboard into place (2). 6 Adding or replacing memory modules - HP ProBook 4410s | Memory Modules - Linux - Page 11
16. Replace the screws on the keyboard. Your computer has either 2 or 3 screws that need to be replaced. NOTE: Refer to the illustration that most closely matches your computer. 17. Slide the switch cover into place. 18. Close the computer display. 7 - HP ProBook 4410s | Memory Modules - Linux - Page 12
19. Replace the 2 screws on the back edge of the computer. 8 Adding or replacing memory modules - HP ProBook 4410s | Memory Modules - Linux - Page 13
area. Your computer has either 2 or 3 screws that need to be replaced. NOTE: Refer to the illustration that most closely matches your computer. 21. Turn the computer upside down on a flat surface, and then replace the battery. 22. Reconnect external power and external devices. 23. Turn on the - HP ProBook 4410s | Memory Modules - Linux - Page 14
Index K keyboard removing 4 M memory module removing 4 memory modules, replacing 1 S switch cover removing 3 10 Index - HP ProBook 4410s | Memory Modules - Linux - Page 15
Memory Modules
User Guide