HP ProLiant 800 Microsoft Windows Event ID and SNMP Traps Reference Guide for
HP ProLiant 800 Manual
View all HP ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ProLiant 800 manual content summary:
- HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 1
Microsoft Windows Event ID and SNMP Traps Reference Guide For use with SmartStart version 8.25 Part number: 347870-009 Ninth edition: June 2009 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP ®, Windows®, Windows NT®, and Windows Server® are U.S. registered trademarks of Microsoft Corporation. - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 3
-774 ...29 Event Identifiers 1061-1098 ...32 Event Identifiers 1101-1199 ...38 Event Identifiers 1200-1294 ...64 Event Identifiers 1343-4613 ...77 Server agents...82 Event Identifiers 256-774 ...82 Event Identifiers 1024-1092 ...85 Event Identifiers 1103-1183 ...93 Event Identifiers 1539-3352 ...124 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 4
traps, which are generated by the HP Insight Management Agents for Servers for Windows®. Each event entry has the corresponding SNMP trap number code flag R-A reserved bit Facility-The facility code (always "CPQ") Code-The facility's status code-the event number; the upper byte refers to the HP - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 5
recorded or monitored. ○ If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more information about Care Packs, see the HP website, http://www.hp.com. • Outside North America, call the nearest HP Technical Support Phone Center. For telephone numbers for worldwide Technical - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 6
string is: %1. The data contains the error code. Event identifier: cpqhsmsg.dll - 257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Foundation Agents service could not allocate memory. The data contains the error code. Event identifier: cpqhsmsg.dll - 258 (Hex)0x84350102 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 7
could not start agent "%1". The data contains the error code. Event identifier: cpqhsmsg.dll - 268 (Hex)0x8435010c (Service Event) Log Severity: Warning (2) Log Message: The Foundation Agents service detected an invalid state for agent "%1". The data contains the state. Event identifier: cpqhsmsg - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 8
service. Please install the SNMP service to enabled remote management of the server. Event identifier: cpqhsmsg.dll - 768 (Hex)0x84350300 (Service the registry. The data contains the error code. Event identifier: cpqhsmsg.dll - 771 (Hex)0x84350303 (Service Event) Log Severity: Warning (2) Log Message - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 9
. The data contains the error code. Event identifier: cpqhsmsg.dll - 774 (Hex)0xc4350306 (Service Event) Log Severity: Error (3) entry has crossed its rising threshold. The instances of those objects contained within the variable list are those of the alarm entry that generated this trap. Supporting - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 10
instances of those objects contained within the variable list are those of the alarm entry that generated this trap. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqMeAlarmVariable • cpqMeAlarmSampleType • cpqMeAlarmValue • cpqMeAlarmFallingThreshold • cpqMeAlarmOwner • cpqMeAlarmSeverity - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 11
instances of those objects contained within the variable list are those of the alarm entry that generated this trap. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqMeAlarmVariable • cpqMeAlarmSampleType • cpqMeAlarmValue • cpqMeAlarmFallingThreshold • cpqMeAlarmOwner • cpqMeAlarmSeverity - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 12
of the cluster resource name, and then check the resource for the cause of the failure. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqClusterResourceName Supporting SNMP Trap Description: "Cluster resource [cpqClusterResourceName] has failed." NT Event ID: 1169 (Hex)0x84350491 (cpqhsmsg - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 13
node name, and then check the node for the cause of the degraded condition. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqClusterNodeName Supporting SNMP Trap Description: "Cluster service on [cpqClusterNodeName] has become degraded." NT Event ID: 1172 (Hex)0xc4350494 (cpqhsmsg.dll) Log - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 14
CPQWINOS.MIB Symptom: The Processor Time performance property is set to critical. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsCpuIndex • cpqOsCpuInstance • cpqOsCpuTimePercent Supporting SNMP Trap Description: "The Processor performance Instance, [cpqOsCpuInstance] is critical with - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 15
.MIB Symptom: The Cache CopyReadHits performance property is set to critical. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsCacheIndex • cpqOsCacheInstance • cpqOsCacheCopyReadHitsPercent Supporting SNMP Trap Description: "The Cache performance property is critical with CopyReadHits - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 16
.dll) Log Severity: Error (3) Log Message: '%4' SNMP Trap: cpqHoCriticalSoftwareUpdateTrap - 11014 in CPQHOST.MIB Symptom: This trap is sent to notify the user of a Critical Software Update. Supporting SNMP Trap Data: • sysName Foundation agents 16 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 17
Supporting SNMP Trap Description: "[cpqHoCriticalSoftwareUpdateData]" Event identifier: cpqhsmsg.dll - 1792 (Hex)0x84350700 (Service Event trap. This can be caused by a failure in the Remote Access Service or by a missing or invalid configuration. Use the Management Agents control - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 18
the registry sub-key: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 2051 (Hex)0x84350803 (Service Event) Log Severity: Warning (2) Log Message: Unable to read from the registry. This error - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 19
Service Event) Log Severity: Warning (2) Log Message: Unable to acquire the CPU performance data. This error can be caused by a low memory condition. Rebooting the server The data contains the error code. Event identifier: cpqhsmsg.dll - 2309 (Hex)0x84350905 (Service Event) Log Severity: Warning (2) - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 20
there is an adequate amount of free memory. Event identifier: cpqhsmsg.dll - 2356 (Hex)0x84350934 (Service Event) Log Severity: Warning (2) Log Message: "%1". The data contains the error code. Event identifier: cpqhsmsg.dll - 2357 (Hex)0x84350935 (Service Event) Log Severity: Warning (2) Log Message - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 21
of range. The data contains the error code. Event identifier: cpqhsmsg.dll - 2359 (Hex)0x84350937 (Service Event) Log Severity: Warning (2) Log or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 3073 (Hex)0x84350c01 (Service Event) Log Severity - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 22
the registry sub-key. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 3842 (Hex)0x84350f02 (Service Event) Log Severity: Warning (2) Log Message: Could not write the registry sub-key: "%1". This - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 23
: Could not enumerate all of the nodes in the cluster. The data contains the error code. Event identifier: cpqhsmsg.dll - 3857 (Hex)0x84350f11 (Service Event) Log Severity: Warning (2) Log Message: Could not get the cluster's status. The Cluster service may not be running. Try to restart the Cluster - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 24
only supports the disk resource class. Event identifier: cpqhsmsg.dll - 3874 (Hex)0x84350f22 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry sub-key: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 25
Event) Log Severity: Warning (2) Log Message: The External Status MIB Agent could not allocate memory. The data contains the error code. Event identifier: cpqhsmsg.dll - 4353 (Hex)0x84351101 (Service Event) Log Severity: Warning (2) Log Message: The External Status MIB Agent could not open the - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 26
system type. The data contains the error code. Event identifier: cpqhsmsg.dll - 4402 (Hex)0x84351132 (Service Event) Log Severity: Warning (2) Log Message there is an adequate amount of free memory. Event identifier: cpqhsmsg.dll - 4405 (Hex)0x84351135 (Service Event) Log Severity: Warning (2) Log - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 27
be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 4623 (Hex)0x8435120f (Service Event) Log Severity: Warning (2) Log Message: The Agent could not access WMI. The WMI support may have not been started or installed - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 28
or may still be in the starting state. Event identifier: cpqhsmsg.dll - 4626 (Hex)0x84351212 (Service Event) Log Severity: Warning (2) Log Message: The Agent failed to process the MOF file to get the data from WMI. Problem with WMI service or MOF file or wrong file paths used. Foundation agents 28 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 29
string is: %1. The data contains the error code. Event identifier: cpqstmsg.dll - 257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Storage Agents service could not allocate memory. The data contains the error code. Event identifier: cpqstmsg.dll - 258 (Hex)0x84350102 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 30
for module "%1". The data contains the error code. Event identifier: cpqstmsg.dll - 267 (Hex)0x8435010b (Service Event) Log Severity: Warning (2) Log Message: The Storage Agents service could not start agent "%1". The data contains the error code. Event identifier: cpqstmsg.dll - 268 (Hex)0x8435010c - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 31
by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 526 (Hex)0x8435020e (Service Event) Log Severity: Warning (2) Log Message: Unsupported storage system. The ProLiant storage system %1 is not supported by this version of the - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 32
(Hex)0xc4350306 (Service Event) Log Severity: Error (3) Log Message: The Remote Alerter Agent received an error on ResetEvent call. The data contains the error code. Event Identifiers 1061-1098 NT Event ID: 1061 (Hex)0xc4350425 (cpqstmsg.dll) Log Severity: Error (3) Event Title: Drive Array Physical - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 33
the agent has detected a change in the status of a drive array logical drive. The variable cpqDaLogDrvStatus indicates the current logical drive status. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaLogDrvStatus Supporting SNMP Trap Description: "Status is now [cpqDaLogDrvStatus]." NT - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 34
has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvStatus indicates the current physical drive status. User Action: If the physical drive status is failed(3) or predictiveFailure(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 35
accelerator cache board that has lost battery power. If data was being stored in the accelerator cache memory when the server lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrSlot • cpqDaCntlrModel - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 36
Agent has detected a change in the status of a SCSI logical drive. The current logical drive status is indicated in the cpqScsiLogDrvStatus variable. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqScsiLogDrvStatus • cpqScsiLogDrvCntlrIndex • cpqScsiLogDrvBusIndex • cpqScsiLogDrvIndex - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 37
change. The agent has detected a change in the Fan Status of a storage system. The variable cpqSsBoxFanStatus indicates the current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxFanStatus - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 38
Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxTempStatus Supporting SNMP Trap Description: "Storage System temperature ok." Event identifier: cpqstmsg.dll - 1098 (Hex)0x4435044a (Service Event) Log Severity: Information (1) Log Message: Drive Array Physical Drive Monitoring is not enabled. The - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 39
of the drives in the storage system due power or replace any failed power supply. SNMP Trap: cpqSs4PwrSupplyDegraded - 8015 in CPQSTSYS.MIB Symptom: A storage system power supply status has been set to degraded. User Action: Restore power or replace any failed storage system power supply. Supporting - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 40
cpqHoTrapFlags • cpqSsBoxFltTolPwrSupplyStatus Supporting SNMP Trap Description: "A storage system power supply unit has become degraded." NT Event ID: 1107 (Hex)0xc4350453 (cpqstmsg.dll) Log Severity: Error (3) Event Title: SCSI Tape Drive Status Change. Log Message: The tape drive with SCSI target - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 41
. For detailed information on a component replacement, see the appropriate Maintenance and Service Guide. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqIdeIdentIndex Supporting SNMP Trap Description: "IDE drive [cpqIdeIdentIndex] has become degraded." NT Event ID: 1122 (Hex)0x44350462 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 42
a change in the status of an External Array logical drive. The variable cpqFcaLogDrvStatus indicates the current logical drive status. User Action: If the logical drive status is failed, examine the array for failed drives that need replacement. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 43
status. The variable cpqFcaSpareBusNumber indicates the SCSI bus number associated with this drive. User Action: If the spare drive status is failed, replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqFcaSpareBusNumber • cpqFcaSpareBay - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 44
Accelerator Cache Board that has lost battery power. If data was being stored in the accelerator memory when the system lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 45
the storage box and all fibre channel connections for problems. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • .dll) Log Severity: Warning (2) Event Title: Storage System Fan Module Status Change. Log Message: Storage system "%4" fan module at location %5 has a new status of %6. SNMP - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 46
Supporting SNMP Trap Description: "Storage system fan status changed to [cpqSsFanModuleStatus]." NT Event ID: 1153 (Hex)0x84350481 (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Storage System Power Supply Status Change. Log Message: Storage system "%4" power supply - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 47
• cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsPowerSupplyBay • cpqSsPowerSupplyUpsStatus Supporting SNMP Trap Description: "Storage system power supply UPS status changed to [cpqSsPowerSupplyUpsStatus]." NT Event ID: 1155 (Hex)0x84350483 (cpqstmsg.dll) Log Severity: Warning (2) Event - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 48
Degraded. The Insight Agent has detected that an autoloader unit is in a degraded condition. • Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapeLibrarySerialNumber Supporting SNMP Trap Description: "Tape library [cpqTapeLibrarySerialNumber] is in a degraded condition." NT Event ID - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 49
• cpqCdLibraryScsiIdIndex • cpqCdLibraryStatus Supporting SNMP Trap Description: "Status is now [cpqCdLibraryStatus]." NT Event ID: 1164 (Hex)0x8435048c (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Drive Array Controller Status Change. Log Message: The Drive Array Controller in slot - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 50
a change in the status of a drive array controller. The variable cpqDaCntlrBoardStatus indicates the problems. If this was the result of a user initiated switchover, no action is required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrSlot • cpqDaCntlrPartnerSlot Supporting - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 51
tapes has been lost. Check the tape library and all Fibre connections for problems. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeCntlrWWN • cpqFcTapeCntlrStatus Supporting SNMP Trap Description: "Status is now [cpqFcTapeCntlrStatus] for tape controller [cpqFcTapeCntlrWWN]." NT - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 52
variable cpqFcTapeDriveScsiTarget indicates the SCSI ID of the tape drive. User Action: If the tape is failed or is offline, check the tape and all fibre channel connections. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeCntlrWWN • cpqFcTapeDriveScsiBus • cpqFcTapeDriveScsiTarget - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 53
SNMP Trap: cpqFcTapeDriveCleanTapeReplace - 16013 in CPQFCA.MIB Symptom: Fibre Channel Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader tape controller for problems. If this was the result of a user initiated switchover, no action is required. Supporting SNMP Trap - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 54
cpqDaTapeLibraryFWRev • cpqDaTapeLibrarySerialNumber • cpqDaTapeLibraryStatus Supporting SNMP Trap Description: "Status is now [cpqDaTapeLibraryStatus] for the tape library." NT Event ID: 1181 (Hex)0x8435049d (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Drive Array Tape Library Door Status - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 55
a cleaning tape inserted and run. This causes the tape drive heads to be cleaned. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaTapeDrvCntlrIndex • cpqDaTapeDrvBusIndex • cpqDaTapeDrvScsiIdIndex • cpqDaTapeDrvLunIndex Supporting SNMP Trap Description: "Cleaning is needed for the tape - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 56
: Tape Drive Cleaning Tape Supporting SNMP Trap Description: "Host controller in slot [cpqFcaHostCntlrSlot] has a new status of [cpqFcaHostCntlrStatus]." NT Event ID: 1186 (Hex)0x843504a2 (cpqstmsg.dll) Log Severity: Warning (2) Event Title: IDE ATA Disk Status Change. Log Message: The ATA disk drive - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 57
• cpqIdeLogicalDriveIndex • cpqIdeLogicalDriveStatus Supporting SNMP Trap Description: "Status is now [cpqIdeLogicalDriveStatus] for the IDE logical drive." NT Event ID: 1188 (Hex)0x843504a4 (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Storage System Fan Status Change. Storage agents - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 58
. The agent has detected a change in the fan status of a storage system. The variable cpqSsBackplaneFanStatus indicates the current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 59
agent has detected a change in the power supply status of a storage system. The variable cpqSsBackplaneFtpsStatus indicates the current status. User Action: If the power supply status is degraded, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 60
Agent has detected a change in the status of a tape drive. The current physical drive status is indicated in the cpqTapePhyDrvStatus variable. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapePhyDrvCntlrIndex • cpqTapePhyDrvBusIndex • cpqTapePhyDrvScsiIdIndex • cpqTapePhyDrvLunIndex - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 61
that needs to have a cleaning tape inserted and run. This causes the tape drive heads to be cleaned. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeDriveCntlrIndex • cpqFcTapeDriveScsiBus • cpqFcTapeDriveScsiTarget • cpqFcTapeDriveScsiLun • cpqFcTapeDriveModel • cpqFcTapeDriveFWRev - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 62
that all cables are connected properly. If the RSO status is secondaryRunningAuto(8) or secondaryRunningUser(9), examine the primary server for failed components. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsChassisRsoStatus • cpqSsChassisIndex - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 63
Supporting SNMP Trap Description: "The door is [cpqFcTapeLibraryDoorStatus] for tape library." NT Event ID: 1199 (Hex)0x843504af (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Drive Array Controller Status Change. Log Message: The Drive the status of a drive array controller. The variable cpqDaCntlrBoardStatus - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 64
that the agent has detected a change in the status of a drive array logical drive. The variable cpqDaLogDrvStatus indicates the current logical drive status. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaLogDrvCntlrIndex • cpqDaLogDrvIndex • cpqDaLogDrvStatus - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 65
has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvStatus indicates the current physical drive status. User Action: If the physical drive status is failed(3) or predictive Failure(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 66
detected a factory threshold associated with one of the physical drive objects on a drive array has been exceeded. User Action: Replace the physical drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvIndex • cpqDaPhyDrvBusNumber - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 67
If data was being stored in the accelerator cache memory when the server lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaCntlrModel • cpqDaAccelCntlrIndex • cpqDaAccelSerialNumber - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 68
cpqDaTapeLibraryFWRev • cpqDaTapeLibrarySerialNumber • cpqDaTapeLibraryStatus Supporting SNMP Trap Description: "Status is now [cpqDaTapeLibraryStatus] for the tape library." NT Event ID: 1208 (Hex)0x843504b8 (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Drive Array Tape Library Door Status - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 69
- 3044 in CPQIDA.MIB Symptom: Tape Drive Cleaning Required trap. The agent has detected a tape drive that needs to have a cleaning tape inserted and run. This causes the tape drive heads to be cleaned. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 70
Event Title: Drive Array Tape Drive Replace Cleaning Tape. Log Message: The cleaning tape in the tape drive in %4, Fan Status of a storage system. The variable cpqSsBoxFanStatus indicates the current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 71
Supporting SNMP Trap Description: "Storage System temperature status changed to [cpqSsBoxTempStatus]." NT Event ID: 1214 (Hex)0x843504be (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Storage System Fault Tolerant Power Supply Status Change. Log Message: The fault tolerant power supply - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 72
User Action: If the power supply status is degraded, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 73
that the agent has detected a change in the status of a drive array spare drive. The variable cpqDaSpareStatus indicates the current spare drive status. User Action: If the spare drive status is failed, replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 74
. The agent has detected a change in the fan status of a storage system. The variable cpqSsBoxFanStatus indicates the current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 75
cpqSsBoxLocationString Supporting SNMP Trap Description: "Storage System power supply status changed to [cpqSsBoxFltTolPwrSupplyStatus]." NT Event ID: 1221 (Hex)0x843504c5 (cpqstmsg.dll) Log Severity: Warning (2) Event Title: SAS/SATA Physical Drive Status Change. Log Message: The physical drive in - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 76
or SATA logical drive. The current logical drive status is indicated in the cpqSasLogDrvStatus variable. Supporting SNMP Trap Data registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 1282 (Hex)0x84350502 (Service Event) Log Severity: - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 77
caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 1294 (Hex)0x8435050e (Service Event) Log Severity: Warning (2) Log Message: Unsupported storage system. The ProLiant storage system %1 is unsupported by this version - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 78
correct this problem. Event identifier: cpqstmsg.dll - 1803 (Hex)0xc435070b (Service Event) code. Event identifier: cpqstmsg.dll - 1806 (Hex)0x8435070e (Service Event) Log Severity: Warning (2) Log Message: The Storage Agent service Access Service or by a missing or invalid configuration. Use the HP - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 79
IDE Agent could not allocate memory. The data contains the error code. Event identifier: cpqstmsg.dll - 3585 (Hex)0x84350e01 (Service Event) Log Severity: Warning (2) Log Message: The IDE Agent could not open the base of the registry. The data contains the error code. Event identifier: cpqstmsg.dll - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 80
data contains the action code. Event identifier: cpqstmsg.dll - 4097 (Hex)0x84351001 (Service Event) Log Severity: Warning (2) Log Message: Could not read from the registry subkey. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 81
read the registry subkey: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 4609 (Hex)0x84351201 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry subkey. This - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 82
(2) Log Message: The Server Agents service could not allocate memory. The data contains the error code. Event identifier: cpqsvmsg.dll - 258 (Hex)0x84350102 (Service Event) Log Severity: Warning (2) Log Message: The Server Agents service could not register with the Service Control Manager. The data - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 83
Log Severity: Warning (2) Log Message: The Server Agents service could not load the module "%1". The data contains the error code. Event identifier: cpqsvmsg.dll - 265 (Hex)0x84350109 (Service Event) Log Severity: Warning (2) Log Message: The Server Agents service could not get the control function - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 84
(3) Log Message: The Server Agents service encountered a fatal error. The service is terminating. The data contains the error code. Event identifier: cpqsvmsg.dll - 400 (Hex)0x44350190 (Service Event) Log Severity: Information (1) Log Message: The Server Agents service version %1 has started. Event - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 85
- 6047 in CPQHLTH.MIB Symptom: Advanced Memory Protection Online Spare Engaged. The Advanced Memory Protection subsystem has detected a memory fault. The Online Spare Memory has been activated. User Action: Schedule server down time to replace the faulty memory. Supporting SNMP Trap Data: • sysName - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 86
SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The Advanced Memory Protection subsystem has engaged the XOR memory." NT Event ID: 1029 (Hex)0x44350405 (cpqsvmsg.dll) Log Severity: Information (1) Log Message: The Fault Tolerant Power Supply Sub-system has returned to - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 87
: cpqHe5CorrMemReplaceMemModule - 6064 in CPQHLTH.MIB Symptom: Corrected Memory Errors Detected. The errors have been corrected, but the memory module should be replaced. Value 0 for CPU means memory is not processor-based. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeResMem2BoardNum - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 88
has been installed. Value 0 for CPU means memory is not processor-based. User Action: None. SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeResMem2BoardSlotNum • cpqHeResMem2BoardCpuNum • cpqHeResMem2BoardRiserNum Supporting SNMP Trap Description: "Memory Board or Cartridge Inserted into Slot - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 89
engine has been activated. For instruction on replacing the faulty memory, see the server documentation. SNMP Trap: cpqHeResilientMemLockStepMemoryEngaged - 6068 in CPQHLTH.MIB Symptom: Advanced Memory Protection LockStep Engine Memory Engaged. The Advanced Memory Protection subsystem has detected - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 90
normally. The system is shut down if the cpqHeThermalDegradedAction variable is set to shutdown (3). Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeThermalDegradedAction Supporting SNMP Trap Description: "Required fan not operating normally. Shutdown may occur." Server agents 90 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 91
- 6023 in CPQHLTH.MIB Symptom: The CPU fan status has been set to failed. A processor fan is not operating normally. The server is shut down. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "CPU fan has failed. Server will be shutdown." NT Event ID: 1089 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 92
returned to normal operation. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "CPU fan is now OK." NT Event ID: 1090 (Hex)0x44350442 (cpqsvmsg.dll) Log Severity: Information (1) Log Message: The server is operational again. The server has previously been shut - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 93
- 6028 in CPQHLTH.MIB Symptom: The fault tolerant power supply sub-system condition has been set to degraded. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The server power supply status has become degraded." NT Event ID: 1108 (Hex - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 94
OS has detected an error in the Remote Insight/ Integrated Lights-Out interface. The firmware is not responding. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Server [sysName], Remote Insight/Integrated Lights-Out interface error." NT Event ID: 1112 (Hex - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 95
false to true. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSeCpuSlot • cpqSeCpuSocketNumber Supporting SNMP Trap Description: "CPU internal corrected errors have The Remote Insight mouse cable has been disconnected. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Server agents 95 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 96
- 6048 in CPQHLTH.MIB Symptom: The fault tolerant power supply condition has been set back to the OK state for the specified chassis and bay location. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeFltTolPowerSupplyChassis • cpqHeFltTolPowerSupplyBay • cpqHeFltTolPowerSupplyStatus - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 97
cpqHoTrapFlags Supporting SNMP Trap Description: "Errors occurred during server restart." NT Event ID: 1124 (Hex)0x84350464 (cpqsvmsg.dll) Log Severity: Warning (2) Log Message: The Fault Tolerant Power Supply Sub-system is in a degraded state. Restore power or replace the failed power supply. SNMP - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 98
• cpqSiServerSystemId Supporting SNMP Trap Description: "The Power Supply is Failed on Chassis [cpqHeFltTolPowerSupplyChassis], Bay [cpqHeFltTolPowerSupplyBay], Status [cpqHeFltTolPowerSupplyStatus], Model [cpqHeFltTolPowerSupplyModel], Serial Num [cpqHeFltTolPowerSupplySerialNumber], Firmware - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 99
Supporting SNMP Trap Description: "The Power Supply Removed on Chassis [cpqHeFltTolPowerSupplyChassis], Bay [cpqHeFltTolPowerSupplyBay]." NT Event ID: 1129 (Hex)0x84350469 (cpqsvmsg.dll) Log Severity: Warning (2) Log Message: The Fan Sub-system is in a degraded state. Replace the fan - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 100
fan location. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeFltTolFanChassis • cpqHeFltTolFanIndex Supporting SNMP Trap Description: "The Fan Removed on Chassis [cpqHeFltTolFanChassis], Fan is shut down due to this condition. Supporting SNMP Trap Data: • sysName Server agents 100 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 101
has been set to OK in the specified chassis and location. The server's temperature has returned to the normal operating range. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeTemperatureChassis • cpqHeTemperatureLocale Supporting SNMP Trap Description: "Temperature Normal on Chassis - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 102
chassis. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHePwrConvChassis Supporting SNMP Trap Description: "The Power Converters are no longer redundant on Chassis [cpqHePwrConvChassis]." NT Event ID: 1140 (Hex)0x84350474 (cpqsvmsg.dll) Log Severity: Warning (2) Server agents 102 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 103
- 2008 in CPQSINFO power up in the specified chassis and slot. User Action: Be sure the board and all cables are installed correctly, and that the board type and revision are the same as the replaced board. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSiHotPlugSlotChassis Server - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 104
the name of the rack. Each of the server blades in each of the enclosure within the rack is updated to reflect the new rack name. It may : None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackSerialNum • cpqRackTrapSequenceNum Supporting SNMP Trap - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 105
Supporting SNMP Trap Description: "The enclosure name has changed to from the rack. User Action: None. Supporting SNMP Trap Data: • sysName • • cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap into the rack. User Action: None. Supporting SNMP Trap Data: • sysName • - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 106
Action: Shut down the enclosure and possibly the rack as soon as possible. Be sure that all fans are working properly and that air flow in the rack has not been blocked. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackCommonEnclosureName Server agents 106 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 107
This trap indicates that an enclosure fan has failed and that no other fans in the redundant fan group are operating. This may result in the enclosure overheating. User Action: Replace the fan as soon as possible. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName Server agents 107 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 108
fan has returned to normal operation. SNMP Trap: cpqRackEnclosureFanOk - 22010 in CPQRACK.MIB Symptom: The enclosure fan status has been set to OK. This trap indicates that an enclosure fan has returned to normal operation. User Action: None. Supporting SNMP Trap Data: • sysName Server agents - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 109
(1) Event Title: Rack Enclosure Fan Inserted Log Message: The enclosure fan has been inserted. SNMP Trap: cpqRackEnclosureFanInserted - 22012 in CPQRACK.MIB Symptom: The enclosure fan has been inserted. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Server agents 109 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 110
Supporting SNMP Trap Description: "The enclosure [cpqRackCommonEnclosureName] fan in rack [cpqRackName] has been inserted." NT Event ID: 1155 (Hex)0xc4350483 (cpqsvmsg.dll) Log Severity: Error (3) Event Title: Rack Power Supply Failed Log Message: This trap indicates that a power supply - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 111
normal operation. SNMP Trap: cpqRackPowerSupplyOk - 22015 in CPQRACK.MIB Symptom: The power supply status has been set to OK. This trap indicates that a power supply has returned to normal operation. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 112
• cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Description: "The power supply [cpqRackPowerSupplyPosition] in enclosure [cpqRackPowerSupplyEnclosureName] in rack [cpqRackName] has been inserted." NT Event ID: 1160 (Hex)0x84350488 (cpqsvmsg.dll) Log Severity: Warning (2) Server agents - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 113
Supporting SNMP Trap Description: "The rack power supply detected an input line voltage problem in power supply [cpqRackPowerSupplyPosition], enclosure [cpqRackPowerSupplyEnclosureName], rack [cpqRackName]." NT Event ID: 1162 (Hex)0x8435048a (cpqsvmsg.dll) Server - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 114
. SNMP Trap: cpqRackPowerShedAutoShutdown - 22021 in CPQRACK.MIB Symptom: Server shutdown due to power shedding. The server blade was shut down due to a lack of power. User Action: Check power connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 115
Log Message: Inadequate power to power on. SNMP Trap: cpqRackServerPowerOnFailedNotEnoughPower - 22023 in CPQRACK.MIB Symptom: Inadequate power to power on. There is not enough power to power on the server blade. User Action: Check power connections or add power supplies. Supporting SNMP Trap Data - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 116
- 22024 in CPQRACK.MIB Symptom: Inadequate power to power on. There is not enough power to power on the server blade. The server enclosure micro-controller was not found. User Action: Check server enclosure connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 117
Title: Server Power On Via Manual Override Log Message: Server power on via manual override. SNMP Trap: cpqRackServerPowerOnManualOverride - 22026 in CPQRACK.MIB Symptom: Server power on via manual override. The server blade was powered on by a manual override. User Action: None. Supporting SNMP - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 118
from the enclosure. SNMP Trap: cpqRackServerBladeRemoved - 22028 in CPQRACK.MIB Symptom: Server blade removed. The server blade has been removed from the enclosure. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackServerBladeEnclosureName - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 119
Symptom: Power subsystem DC power problem. There is a power subsystem DC power problem for this power enclosure. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName Server agents - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 120
.MIB Symptom: Unknown power consumption. There is an unknown power consumer drawing power. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid Server agents 120 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 121
number of power enclosures has been exceeded. User Action: Remove the extra power enclosure. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackCommonEnclosureName • cpqRackCommonEnclosureSerialNum • cpqRackCommonEnclosureTrapSequenceNum Server agents 121 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 122
Power subsystem improperly configured. The power subsystem has been improperly configured. User Action: Check the cabling of the power enclosure. Supporting firmware update or some other event. User action: None Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting the error code. SNMP Trap - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 123
re-flash the management processor firmware. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: The to the server. User Action: None required. Supporting SNMP Trap Data: • sysName, • cpqHoTrapFlags • cpqSeUSBDeviceType • cpqSeUSBDeviceName Supporting SNMP Trap - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 124
memory condition. Rebooting the server may correct this error. Event identifier: cpqsvmsg.dll - 1540 (Hex)0xc4350604 (Service Server Agents, the software support drivers, or running the Emergency Repair procedure may correct this error. Event identifier: cpqsvmsg.dll - 1544 (Hex)0x84350608 (Service - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 125
the registry sub-key. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqsvmsg.dll - 3330 (Hex)0x84350d02 (Service Event) Log Severity: Warning (2) Log Message: Could not write the registry sub-key: "%1". This - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 126
by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqsvmsg.dll - 3342 (Hex)0x84350d0e (Service Event) Log Severity: Warning (2) Log Message: The Remote Insight Agent got an unexpected error code while waiting for multiple events. The - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 127
code. Event identifier: cpqsvmsg.dll - 5637 (Hex)0x84351605 (Service )0x84351606 (Service Event) code. Event identifier: cpqsvmsg.dll - 5639 (Hex)0x84351607 (Service code. Event identifier: cpqsvmsg.dll - 5640 (Hex)0x84351608 (Service code. Event identifier: cpqsvmsg.dll - 5641 (Hex)0x84351609 (Service - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 128
contains the error code. Event identifier: cpqsvmsg.dll - 5682 (Hex)0x84351632 (Service Event) Log the error code. Event identifier: cpqsvmsg.dll - 5683 (Hex)0x84351633 (Service Event) Log data contains the error code. Event identifier: cpqsvmsg.dll - 5684 (Hex)0x84351634 (Service Event) Log Severity - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 129
The data contain the error code. Event identifier: cpqnimsg.dll - 261 (Hex)0x84350105 (Service Event) Log Severity: Warning (2) Log Message: Unable to read from the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 130
memory condition. Rebooting the server may correct this error. Event identifier: cpqnimsg.dll - 266 (Hex)0x8435010a (Service Event problem. The data contain the error code. Event identifier: cpqnimsg.dll - 272 (Hex)0x84350110 (Service Event) Log Severity: Warning (2) Log Message: Failure in driver - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 131
drivers and team. Event identifier: cpqnimsg.dll - 274 (Hex)0x84350112 (Service Event) Log Severity: Warning (2) Log Message: The NIC Management Agent cannot generate Traps due to a communication problem contain the error code. Event identifier: cpqnimsg.dll - 285 (Hex)0x8435011d (Service Event) Log - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 132
) Log Severity: Warning (2) Log Message: An attempt to log an event to the IML failed. The IML log may be full. Clearing the IML log may correct this problem. Event identifier: cpqnimsg.dll - 298 (Hex)0xc435012a (Service Event) Log Severity: Error (3) Log Message: A fatal error occurred during Virus - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 133
not running. Starting WMI service or NIC agent might solve this problem. Event identifier: cpqnimsg.dll - 299 (Hex)0x8435012b (Service Event) Log Severity: with key %1. Check to make sure management service is up and running. This may cause data received from Compaq SNMP agent to be old or invalid. - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 134
the Insight Agents may correct this problem. Event identifier: cpqnimsg.dll - 1033 (Hex)0x44350409 (Service Event) Log Severity: Information (1) Compaq Remote Insight Board trap due to processing error. The data contains the error code. Event identifier: cpqnimsg.dll - 1037 (Hex)0x8435040d (Service - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 135
a trap. This can be caused by a failure in the Remote Access Service or by a missing or invalid configuration. Use the Insight Agent control panel to Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName NIC agents 135 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 136
cable that was unplugged. User Action: None required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName NIC agents 136 - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 137
a faulty cable or connecting a cable that was disconnected. User Action: None required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqNicIfPhysAdapterSlot • cpqNicIfPhysAdapterPort • cpqSiServerSystemId • cpqNicIfPhysAdapterStatus • cpqSePciSlotBoardName • cpqNicIfPhysAdapterPartNumber - HP ProLiant 800 | Microsoft Windows Event ID and SNMP Traps Reference Guide for - Page 138
to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqNicIfPhysAdapterSlot • cpqNicIfPhysAdapterPort • cpqSiServerSystemId • cpqNicIfPhysAdapterStatus • cpqSePciSlotBoardName
Microsoft Windows Event ID and SNMP Traps
Reference Guide
For use with SmartStart version 8.25
Part number: 347870-009
Ninth edition: June 2009