HP ProSignia 500 Compaq ProSignia 500 Family of PC Servers Addendum to the Mai
HP ProSignia 500 Manual
View all HP ProSignia 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ProSignia 500 manual content summary:
- HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 1
Number: 144257-001) Document Number: 188389-001 This addendum only provides specific information for the Compaq ProSignia 500 Family of Servers. Refer to the Maintenance and Service Guide for Compaq ProSignia PC Servers (144257-001) for general procedures not found in this addendum. o Illustrated - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 2
Unit Hood 144208-001 * 3 Access Panel 144210-001 * 4 Front Bezel 211414-001 * 5 Fan Assembly 211410-001 * 6 Speaker Assembly (includes board guide) 211411-001 7 Power/Drive LED Bracket 119853-001 8 Blank Bezel, 1/2 Height 116793-001 * 9 Blank Bezel, 1/3 Height 116792-001 * 10 - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 3
12 Foot 149106-001 13 ProSignia 500 Logo 211419-001 * 14 Option Slot Cover 101144-001 15 with heatsink 222906-001 * 19 32-Bit Fast-SCSI-2 Controller Board 142040-001 * 20 Compaq SMART SCSI Array Controller Board 142130-001 * 21 32-Bit NetFlex Controller Board 142041-001 * - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 4
MEMORY -----35 4-MB Memory Module (70 ns) 4-MB Memory Module (60 ns) 141754-001 139139-001 36 8-MB Memory Module (70 ns) 8-MB Memory Module (60 ns) 141755-001 139140-001 37 16-MB Memory Module (70 ns) 16-MB Memory Module (60 ns) 149947-001 139141-001 38 32-MB Memory Module (70 ns) 32-MB - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 5
Item Description Part Number 59 Spacesaver Keyboard, Arabic 160648-236 * 60 Spacesaver Keyboard, Belgian 160648-218 * 61 Spacesaver Keyboard, Japanese 160648-219 * 62 Spacesaver Keyboard, BHCSY ** 160648-220 * 63 Spacesaver Keyboard, Hungarian 160648-221 * 64 Spacesaver - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 6
unit about half an inch (1.5 cm). 3. Lift and remove the panel. 4. Reverse steps for replacing the Side Access Panel. CAUTION Do not operate the server with the covers removed. The covers are an integral part of the cooling system and removing them while the system is running may adversely affect - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 7
Removing the Air Baffle To remove the Air Baffle: 1. Remove the Side Access Panel. 2. Push in locking tab [A] and swing the right side of the Air Baffle out and away from the chassis [B]. 3. Using a flat-head screwdriver pry and lift the bottom hinge off. 4. Reverse step for replacing the Air Baffle - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 8
affect data integrity. CAUTION Make sure the peripheral cables are plugged in before turning on the power to avoid damaging the server. Memory The Compaq ProSignia 500 Family of Servers comes standard with 16 MB of system memory. Memory can be expanded to a maximum of 144 MB by installing - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 9
o Install SIMM pairs in slots J2 and J4 second. o SIMM modules must be 70 ns or faster. Do not install 80 ns SIMMs in the server. CAUTION Use only JEDEC standard SIMMs. Non-JEDEC SIMMs may adversely affect data integrity Removing a Memory Module To remove a memory module, complete the following - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 10
Option Boards The ProSignia 500 Server contains five expansion slots: o Three EISA expansion slots (slots 1, 2, and 3) o One shared EISA/PCI expansion slot (slot 4). o One dedicated PCI local bus expansion slot (slot 5) - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 11
Reference Component 1 Processor board slot 2 PCI slot 3 EISA / PCI shared slot 4 EISA slots The following illustration shows the differences between EISA, PCI, and ISA connectors: - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 12
Reference Component 1 ISA board 2 EISA board 3 PCI board Removing an Option Board Follow these instructions to remove an option board: 1. Remove any cables connected to the option board. 2. Remove retaining screw from the option board. 3. Pull board straight out. - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 13
Mass Storage Devices There are a total of eight drive bays for internal mass storage devices. SCSI devices can be installed in the removable media drive bays (4, 5, or 6) [Item 1], in the side access drive bays (0, 1, 2, or 3) [Item 2], or attached to the External 32-Bit Fast-SCSI-2 port. - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 14
SCSI hard drive is used it should be installed in bay 0. o Compaq SCSI cables for the Compaq ProSignia 500 are terminated, be sure to remove all terminating jumpers from 3rd party SCSI devices. NOTE: Supported Compaq SCSI options are not terminated. The following guidelines apply when adding a SMART - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 15
o Bays 0, 1, 2, and 3 are recommended for hard drives configured as an array. o A maximum of seven SCSI-2 devices may be added. o The SCSI ID for each device should be the same as the bay number (Bay 0 = SCSI ID 0). Mass Storage Devices in the Removable Media Area To remove a mass storage device in - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 16
Hard Drives in the Side Access Drive Bays The side access drive bays provide room for four half-height 3.5 inch Fast SCSI-2 hard drives. To remove a hard drive: 1. Remove the Side Access Door. 2. Remove power and signal cables. 3. Squeeze the two retaining clips on each side. 4. Slide the storage - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 17
storage devices can be connected to the Compaq ProSignia 500 by using the External Fast-SCSI-2 Port on the back of the unit, or the Fast-SCSI-2 Port on the optional Fast-SCSI-2 Controllers Cable Routing for SCSI Devices Cabling The ProSignia 500 server uses a terminated cable. When installing a SCSI - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 18
Miscellaneous Parts Battery/Clock Module - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 19
the battery/clock module located on the system board. The battery is permanently soldered to the board and cannot be replaced Follow these instructions to install the replacement battery: 1. Remove the Side Access Panel. 2. Swing open the Air Baffle. 3. Remove all processor boards and option boards - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 20
by established parts return methods Switch And Jumper Settings This chapter provides switch and jumper information for the Compaq ProSignia 500 Family of Servers. System Board Compaq ProSignia 500 switch locations on the system board are shown below. Switch SW1 is a six-position switch bank (S1-S6 - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 21
Sw Function Position Status S1 VIDEO DISABLE OFF * ENABLED This switch is ignored and the integrated ON DISABLED video is disabled if ROM detects an optional video board installed. S2 CONFIGURATION LOCK OFF * DISABLED System configuration cannot be changed when ON ENABLED - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 22
Below are the physical locations of jumpers ID2, ID1, and ID0 on supported SCSI options. Physical and Operating Specifications Table 4. Internal CD-ROM Specifications Capacity 680 MB or greater, dependent on disc format Data Transfer Rate: Sustained 300 or 150 KB/sec Asynchronous - HP ProSignia 500 | Compaq ProSignia 500 Family of PC Servers Addendum to the Mai - Page 23
Computer Corporation All rights reserved. Printed in the U.S.A. Compaq Registered U.S. Patent and Trademark Office ProSignia 500 is a trademark of Compaq Computer Corporation. ADDENDUM TO THE MAINTENANCE AND SERVICE GUIDE PROSIGNIA FAMILY OF PC SERVERS (144257-001) First Edition (October 1994) Part
Addendum
Publication Date: October 1994
Document Name:
Addendum to the Maintenance and Service Guide ProSignia
500 Family of PC Servers (Document Number: 144257-001)
Document Number: 188389-001
This addendum only provides specific information for the Compaq ProSignia
500 Family of Servers. Refer to the Maintenance and Service Guide for
Compaq ProSignia PC Servers (144257-001) for general procedures not found
in this addendum.
o Illustrated Parts Catalog
- System Exploded View
- Spares Parts List
o Removal and Replacement Procedures
- Removing the Side Access Panel
- Removing the Air Baffle
- Memory
- Option Boards
- Mass Storage Devices
- Removable Media Storage
- Drive Installation Guidelines
- Mass Storage Devices in the Removable Media Area
- External Storage
- Cabling
- Miscellaneous Parts
- Battery Replacement
o Switch and Jumper Settings
- System Board
- SCSI Devices
o Physical and Operating Specifications
- CD-ROM Drive
Illustrated Parts Catalog
This section provides an illustrated parts breakdown and a spare parts list
for the Compaq ProSignia 500 Family of Servers.