HP Stitch S500 Introductory Information

HP Stitch S500 Manual

HP Stitch S500 manual content summary:

  • HP Stitch S500 | Introductory Information - Page 1
    HP Stitch S300 64in Printer HP Stitch S500 64in Printer Introductory Information
  • HP Stitch S500 | Introductory Information - Page 2
    to change without notice. The only warranties for HP Products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors
  • HP Stitch S500 | Introductory Information - Page 3
    Table of contents HP Stitch S300 64in and S500 64in Printers 1 Introductory Information ...1 Legal notices ...1 Safety precautions ...2 Front panel ...4 Front-panel error codes ...6 Power specifications ...12 Acoustic specifications ...12 Environmental specifications 12 Physical specification ...
  • HP Stitch S500 | Introductory Information - Page 4
    iv ENWW
  • HP Stitch S500 | Introductory Information - Page 5
    safety instructions, describes the use of the front panel, lists error codes that you may encounter, and gives power specifications. The user guide for your printer can be downloaded from: ● HP Stitch S300 64in. Printer: www.hp.com/go/StitchS30064in/manuals ● HP Stitch S500 64in. Printer: www.hp
  • HP Stitch S500 | Introductory Information - Page 6
    with zones marked with warning labels. Do not repair or replace any part of the printer, or attempt any servicing, unless specifically recommended in the user-maintenance instructions, or in published user repair instructions that you understand and have the skills to carry out. Do not attempt to
  • HP Stitch S500 | Introductory Information - Page 7
    . ● Connect the power cord to a dedicated line protected by a branch circuit breaker, as explained in the site preparation guide. ● Use only the power cord supplied by HP with the printer. Do not use a damaged power cord. Do not use the power cord with other products. ● Do not insert objects
  • HP Stitch S500 | Introductory Information - Page 8
    in the User Guide) to avoid operator discomfort and equipment malfunction. Air conditioning in the work area should take into account that the printer produces heat. Typically, the printer's power dissipation is 0.75 kW (2.5 kBTU/h) for the HP Stitch S300/S500 64in Printer. Air conditioning
  • HP Stitch S500 | Introductory Information - Page 9
    the screen. It summarizes the status of the ink cartridges, the substrate, and the current print job top left of the screen is a message showing the printer status or the most important current alert. Tap this can tap an alert to get help in solving the problem. ● At the top right, tap to turn on
  • HP Stitch S500 | Introductory Information - Page 10
    on the front panel that is not included in this list, turn off the printer and then turn it back on. If the problem persists, call your service representative. Always keep your printer updated with the latest firmware version available, it will include fixes to most common errors. Error code 14.73
  • HP Stitch S500 | Introductory Information - Page 11
    Turn off the printer and unplug the printer. 2. Check that the ambient temperature is within printer specifications (15-35°C). 3. Check that the electronic enclosures at the rear of the printer are properly ventilated. 4. Turn on the printer. Generic firmware error. Update the printer's firmware
  • HP Stitch S500 | Introductory Information - Page 12
    the maintenance cartridge. 3. Turn on the printer. 4. If the error persists, replace the maintenance cartridge. A possible error in the ink cartridge pressure sensor has been detected. The ink level reported may not be accurate. Call your service representative if feasible. Intermediate tank was
  • HP Stitch S500 | Introductory Information - Page 13
    32:01.1, 32:01.2 32.2x:10 HP Stitch S500 64in Printer 41:03 42:03 Recommendation The take-up reel is disconnected. If you want to use the take-up reel, turn off the printer and ensure that all take-up reel cables are connected (sensor cables, printer cable). If you do not want to
  • HP Stitch S500 | Introductory Information - Page 14
    HP Stitch S500 64in Printer 54.03 63:04 63:05 68:03 Recommendation 3 litre ink-cartridge pump unable to supply ink printer. An input/output problem has occurred in the network card. 1. Make sure that the network cable is correctly connected to the network card. 2. Check that your printer firmware
  • HP Stitch S500 | Introductory Information - Page 15
    substrate. Printing with the ink collector is not available in this print mode. Generic firmware error. Update the printer's firmware. It was impossible to the obstruction. 3. Turn on the printer. There is a problem in the carriage assembly. 1. Turn off the printer. 2. Open the window, observing
  • HP Stitch S500 | Introductory Information - Page 16
    Sleep mode Idle mode Operating mode Sleep mode Idle mode Operating mode HP Stitch S300 < 16 dB (A) 38 dB (A) 53 dB (A) < 3.5 B (A) 5.7 B (A) 7.1 B (A) HP Stitch S500 < 16 dB (A) 38 dB (A) 55 dB (A) < 3.5 B (A) 5.6 B (A) 7.3 B (A) Environmental specifications Relative humidity range for
  • HP Stitch S500 | Introductory Information - Page 17
    the Ink system chapter in the User Guide: http://www.hp.com/go/StitchS30064in/manuals or http://www.hp.com/go/ StitchS50064in/manuals. Physical specification Weight (including stand) Width Depth Height Weight with packaging Width with packaging Depth with packaging Height with packaging HP Stitch
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

HP Stitch S300 64in Printer
HP Stitch S500 64in Printer
Introductory Information