HP StorageWorks 8/80 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01
HP StorageWorks 8/80 - SAN Switch Manual
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/80 manual content summary:
- HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 1
53-1001338-01 ® 28 July 2009 Fabric OS Message Reference Supporting Fabric OS v6.3.0 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 2
any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make brocade.com/support/oscd. Brocade Communications Systems, Incorporated Corporate and Latin American Headquarters Brocade Communications Systems, Inc. 1745 Technology Drive San - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 3
number Diagnostic and System Error Message Reference v4.2.0 53-0000515-08 Update software and hardware support March 2004 Fabric OS System Error Message 53-0000515-09 Updated for v4.4.0, Reference Manual First RASLog release August 2004 Fabric OS System Error Message 53-0000515-10 Added 22 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 4
, CONF, CTAP, CVLC, CVLM, DAUTH, EM, FABR, FCIP, FCPH, FCR, FICON, FICU, FSPF, FSS, FW, HAM, HSL, KAC, KSWD, LANCE, LFM, MS, NS, NSM, PMGR, PORT, PSWP, RKD, SEC, SPC, SPM, SS, SULB, SWCH, TAPE, UCST, UPTH, XTUN, ZONE. -Added new chapters for LANCE, BLS, AN, CVLM, DAUTH, XTUN. -Updated Introductory - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 5
In this chapter lxiii How this document is organized lxiii Supported hardware and software lxiii What's new in this document Logging 1 Event Auditing 2 System Logging Daemon (syslogd 3 System Console 4 Port Logs 4 Viewing and Configuring System Message Logs 4 Viewing System Messages from - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 6
Responding to a System Message 11 Looking Up a System Message 12 Gathering Information About the Problem 12 Support 13 Panic Dump and Core Dump Files 13 Trace Dumps 13 supportSave Command 13 System Module Descriptions 13 Section I RASLog Messages Chapter 2 AG System Messages - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 7
Chapter 3 Chapter 4 AG-1026 32 AG-1027 32 AG-1028 32 AG-1029 32 AG-1030 33 AG-1031 33 AG-1032 33 AG-1033 33 AG-1034 34 AG-1035 34 AG-1036 34 AG-1037 34 AN System Messages AN-1001 37 AN-1002 37 AN-1003 37 AUTH System Messages AUTH-1001 39 AUTH-1002 39 AUTH-1003 39 AUTH-1004 40 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 8
AUTH-1027 45 AUTH-1028 46 AUTH-1029 46 AUTH-1030 46 AUTH-1031 47 AUTH-1032 47 AUTH-1033 47 AUTH-1034 48 AUTH-1035 48 AUTH-1036 48 AUTH-1037 49 AUTH-1038 49 AUTH-1039 49 AUTH-1040 50 AUTH-1041 50 AUTH-1042 50 AUTH-1043 51 AUTH-1044 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 9
Fabric OS Message Reference 53-1001338-01 BL-1002 59 BL-1003 60 BL-1004 60 BL-1006 60 BL-1007 61 BL-1008 61 BL-1009 61 BL-1010 62 BL-1011 62 BL-1012 62 BL-1013 63 BL-1014 63 BL-1015 64 BL-1016 64 BL-1017 65 BL-1018 65 BL-1019 65 BL-1020 66 BL-1021 66 BL-1022 66 BL-1023 67 BL- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 10
-1004 78 BM-1005 78 BM-1006 78 BM-1007 79 BM-1008 79 BM-1009 79 BM-1010 79 BM-1053 80 BM-1054 80 BM-1055 80 BM-1056 80 BM-1058 81 Chapter 11 C2 System Messages C2-1001 83 C2-1002 83 C2-1004 83 C2-1006 84 C2-1007 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 11
Chapter 12 CDR System Messages CDR-1001 87 CDR-1002 87 CDR-1003 87 CDR-1004 88 CDR-1005 88 CDR-1006 88 Chapter 13 CEE CONFIG System Messages CCFG-1001 89 CCFG-1002 89 CCFG-1003 89 CCFG-1004 89 CCFG-1005 90 CCFG-1006 90 CCFG-1007 90 CCFG-1008 90 CCFG-1009 91 CCFG-1010 91 CCFG-1011 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 12
CNM-1007 98 CNM-1008 98 CNM-1009 99 CNM-1010 99 CNM-1011 99 CNM-1012 99 CNM-1013 100 CNM-1014 100 CNM-1015 100 CNM-1016 100 CNM-1017 101 CNM-1018 101 CNM-1019 101 CNM-1020 101 CNM-1021 102 CNM-1022 102 CNM-1023 102 CNM-1024 102 CNM-1025 103 CNM-1026 103 CNM-1027 103 CNM-1028 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 13
CNM-1044 107 CNM-1045 108 CNM-1046 108 CNM-1047 108 CNM-1048 108 CNM-1049 109 CNM-1050 109 CNM-1051 109 CNM-1052 109 CNM-1053 110 CNM-1054 110 CNM-1055 110 CNM-1056 110 CNM-1057 111 CNM-1058 111 CNM-3001 111 CNM-3002 111 CNM-3003 112 CNM-3004 112 CNM-3005 112 CNM-3006 112 CNM- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 14
CONF-1032 117 CONF-1040 117 CONF-1041 118 Chapter 18 CTAP System Messages CTAP-1001 119 Chapter 19 CVLC System Messages CVLC-1001 121 CVLC-1002 121 CVLC-1003 121 CVLC-1004 122 CVLC-1005 122 CVLC-1006 122 CVLC-1007 122 CVLC-1008 123 CVLC-1009 123 CVLC-1010 123 CVLC-1011 124 CVLC- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 15
CVLM-1007 130 CVLM-1008 130 CVLM-1009 131 CVLM-1010 131 CVLM-1011 131 CVLM-1012 131 CVLM-3001 132 CVLM-3002 132 CVLM-3003 132 CVLM-3004 132 CVLM-3005 133 CVLM-3006 133 CVLM-3007 133 CVLM-3008 133 CVLM-3009 134 CVLM-3010 134 CVLM-3011 134 CVLM-3012 134 CVLM-3013 135 CVLM-3014 135 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 16
DOT1-1006 140 DOT1-1007 140 DOT1-1008 140 DOT1-1009 141 DOT1-1010 141 Chapter 22 EM System Messages EM-1001 143 EM-1002 143 EM-1003 143 EM-1004 144 EM-1005 144 EM-1006 145 EM-1007 145 EM-1008 145 EM-1009 146 EM-1010 146 EM-1011 146 EM-1012 146 EM-1013 147 EM-1014 147 EM-1015 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 17
EM-1044 153 EM-1045 154 EM-1046 154 EM-1047 154 EM-1048 155 EM-1049 155 EM-1050 155 EM-1051 156 EM-1057 156 EM-1058 156 EM-1059 156 EM-1060 157 EM-1061 157 EM-1062 157 EM-1063 158 EM-1064 158 EM-1065 158 EM-1066 158 EM-1067 159 EM-1068 159 EM-1069 159 EM-1070 160 EM-2003 160 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 18
ESW-1006 164 ESW-1007 164 ESW-1008 165 Chapter 25 EVMD System Messages EVMD-1001 167 Chapter 26 FABR System Messages FABR-1001 169 FABR-1002 169 FABR-1003 169 FABR-1004 170 FABR-1005 170 FABR-1006 170 FABR-1007 171 FABR-1008 171 FABR-1009 171 FABR-1010 172 FABR-1011 172 FABR-1012 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 19
FABR-1035 178 FABR-1036 178 FABR-1037 178 FABR-1038 179 FABR-1039 179 FABR-1040 179 FABR-1041 180 FABR-1043 180 FABR-1044 180 FABR-1045 180 FABR-1046 181 Chapter 27 FABS System Messages FABS-1001 183 FABS-1002 183 FABS-1004 183 FABS-1005 184 FABS-1006 184 FABS-1007 184 FABS-1008 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 20
FCIP-1003 193 FCIP-1004 194 Chapter 31 FCOE System Messages FCOE-1001 195 FCOE-1002 195 FCOE-1003 195 FCOE-1004 195 FCOE-1005 196 FCOE-1006 196 FCOE-1007 196 FCOE-1008 196 FCOE-1009 197 FCOE-1010 197 FCOE-1011 197 FCOE-1012 197 FCOE-1013 198 FCOE-1014 198 FCOE-1015 198 FCOE-1016 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 21
Fabric OS Message Reference 53-1001338-01 FCR-1006 206 FCR-1007 206 FCR-1008 206 FCR-1009 207 FCR-1010 207 FCR-1011 207 FCR-1012 208 FCR-1013 208 FCR-1015 208 FCR-1016 208 FCR-1018 209 FCR-1019 209 FCR-1020 209 FCR-1021 210 FCR-1022 210 FCR-1023 210 FCR-1024 211 FCR-1025 211 FCR- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 22
FCR-1049 216 FCR-1053 217 FCR-1054 217 FCR-1055 217 FCR-1056 218 FCR-1057 218 FCR-1058 218 FCR-1059 219 FCR-1060 219 FCR-1061 219 FCR-1062 219 FCR-1063 220 FCR-1064 220 FCR-1065 220 FCR-1066 221 FCR-1067 221 FCR-1068 221 FCR-1069 221 FCR-1070 222 FCR-1071 222 FCR-1072 222 FCR- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 23
FCR-1089 227 FCR-1091 227 FCR-1092 228 Chapter 35 FICON System Messages FICN-1003 229 FICN-1004 230 FICN-1005 230 FICN-1006 230 FICN-1007 231 FICN-1008 231 FICN-1009 231 FICN-1010 231 FICN-1011 232 FICN-1012 232 FICN-1013 232 FICN-1014 233 FICN-1015 233 FICN-1016 233 FICN-1017 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 24
FICN-1035 239 FICN-1036 239 FICN-1037 239 FICN-1038 240 FICN-1039 240 FICN-1040 240 FICN-1041 240 FICN-1042 241 FICN-1043 241 FICN-1044 241 FICN-1045 242 FICN-1046 242 FICN-1047 242 FICN-1048 242 FICN-1049 243 FICN-1050 243 FICN-1051 243 FICN-1052 244 FICN-1053 244 FICN-1054 244 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 25
FICN-1072 249 FICN-1073 250 FICN-1074 250 FICN-1075 250 FICN-1076 251 FICN-1077 251 FICN-1078 251 FICN-1079 252 FICN-1080 252 FICN-1081 252 FICN-1082 253 FICN-1083 253 FICN-1084 253 FICN-1085 253 FICN-1086 254 Chapter 36 FICU System Messages FICU-1001 255 FICU-1002 255 FICU-1003 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 26
Chapter 38 FLOD System Messages FLOD-1001 263 FLOD-1003 263 FLOD-1004 263 FLOD-1005 263 FLOD-1006 264 Chapter 39 FSPF System Messages FSPF-1001 265 FSPF-1002 265 FSPF-1003 265 FSPF-1005 266 FSPF-1006 266 FSPF-1007 266 FSPF-1008 266 Chapter 40 FSS System Messages FSS-1001 269 FSS- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 27
Fabric OS Message Reference 53-1001338-01 FW-1004 276 FW-1005 276 FW-1006 276 FW-1007 277 FW-1008 277 FW-1009 277 FW-1010 277 FW-1011 278 FW-1012 278 FW-1033 278 FW-1034 278 FW-1035 279 FW-1036 279 FW-1037 279 FW-1038 280 FW-1039 280 FW-1040 280 FW-1041 281 FW-1042 281 FW-1043 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 28
FW-1121 287 FW-1122 287 FW-1123 288 FW-1124 288 FW-1125 288 FW-1126 289 FW-1127 289 FW-1128 289 FW-1129 290 FW-1130 290 FW-1131 290 FW-1132 291 FW-1133 291 FW-1134 291 FW-1135 292 FW-1136 292 FW-1137 292 FW-1138 292 FW-1139 293 FW-1140 293 FW-1160 293 FW-1161 294 FW-1162 294 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 29
Fabric OS Message Reference 53-1001338-01 FW-1177 299 FW-1178 299 FW-1179 299 FW-1180 300 FW-1181 300 FW-1182 300 FW-1183 301 FW-1184 301 FW-1185 301 FW-1186 302 FW-1187 302 FW-1188 302 FW-1189 302 FW-1190 303 FW-1191 303 FW-1192 303 FW-1193 304 FW-1194 304 FW-1195 304 FW-1196 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 30
FW-1242 310 FW-1243 310 FW-1244 311 FW-1245 311 FW-1246 311 FW-1247 312 FW-1248 312 FW-1249 312 FW-1250 313 FW-1251 313 FW-1272 313 FW-1273 313 FW-1274 314 FW-1275 314 FW-1296 314 FW-1297 315 FW-1298 315 FW-1299 315 FW-1300 316 FW-1301 316 FW-1302 316 FW-1303 317 FW-1304 317 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 31
Fabric OS Message Reference 53-1001338-01 FW-1319 322 FW-1320 322 FW-1321 323 FW-1322 323 FW-1323 323 FW-1324 324 FW-1325 324 FW-1326 324 FW-1327 325 FW-1328 325 FW-1329 325 FW-1330 326 FW-1331 326 FW-1332 326 FW-1333 327 FW-1334 327 FW-1335 327 FW-1336 328 FW-1337 328 FW-1338 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 32
FW-1356 335 FW-1357 335 FW-1358 335 FW-1359 336 FW-1360 336 FW-1361 336 FW-1362 337 FW-1363 337 FW-1364 337 FW-1365 337 FW-1366 338 FW-1367 338 FW-1368 338 FW-1369 339 FW-1370 339 FW-1371 339 FW-1372 340 FW-1373 340 FW-1374 341 FW-1375 341 FW-1376 341 FW-1377 342 FW-1378 342 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 33
Fabric OS Message Reference 53-1001338-01 FW-1432 346 FW-1433 347 FW-1434 347 FW-1435 347 FW-1436 348 FW-1437 348 FW-1438 348 FW-1439 348 FW-1440 349 FW-1441 349 FW-1442 349 FW-1443 349 FW-1444 350 FW-1445 350 FW-1446 350 FW-1500 351 FW-1501 351 FW-1510 351 FW-1511 352 FW-1512 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 34
FW-1530 358 FW-1531 358 FW-1532 358 FW-1533 358 FW-1534 359 FW-3010 359 FW-3011 359 FW-3012 360 FW-3013 360 FW-3014 360 FW-3015 360 FW-3016 361 FW-3017 361 FW-3018 361 FW-3019 361 FW-3020 362 FW-3021 362 Chapter 43 HAM System Messages HAM-1001 363 HAM-1002 363 HAM-1004 363 HAM- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 35
Fabric OS Message Reference 53-1001338-01 HIL-1103 369 HIL-1104 370 HIL-1105 370 HIL-1106 370 HIL-1107 371 HIL-1108 371 HIL-1201 371 HIL-1202 372 HIL-1203 372 HIL-1204 372 HIL-1206 373 HIL-1207 373 HIL-1208 373 HIL-1301 374 HIL-1302 374 HIL-1303 374 HIL-1304 374 HIL-1305 375 HIL- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 36
-1650 382 Chapter 46 HLO System Messages HLO-1001 383 HLO-1002 383 HLO-1003 383 Chapter 47 HMON System Messages HMON-1001 385 Chapter 48 HSL System Messages HSL-1000 387 HSL-1001 387 HSL-1002 387 HSL-1003 387 HSL-1004 388 HSL-1004 388 HSL-1005 388 HSL - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 37
Chapter 52 ICPD System Messages ICPD-1001 397 ICPD-1002 397 ICPD-1003 397 ICPD-1004 397 ICPD-1005 398 ICPD-1006 398 ICPD-1007 398 ICPD-1008 398 Chapter 53 IPAD System Messages IPAD-1000 401 IPAD-1001 401 Chapter 54 IPS System Messages IPS-1001 403 IPS-1002 403 IPS-1003 403 IPS-1004 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 38
xxxviii Chapter 57 KAC System Messages KAC-1002 411 KAC-1004 411 KAC-1006 411 KAC-1007 411 KAC-1008 412 KAC-1009 412 Chapter 58 KSWD System Messages KSWD-1001 413 KSWD-1002 413 Chapter 59 KTRC System Messages KTRC-1001 415 KTRC-1002 415 KTRC-1003 415 KTRC-1004 415 KTRC-1005 416 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 39
LFM-1004 424 LFM-1005 424 LFM-1006 424 Chapter 64 LOG System Messages LOG-1000 425 LOG-1001 425 LOG-1002 425 LOG-1003 426 Chapter 65 LSDB System Messages LSDB-1001 427 LSDB-1002 427 LSDB-1003 427 LSDB-1004 428 Chapter 66 MFIC System Messages MFIC-1001 429 MFIC-1002 429 MFIC-1003 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 40
MS-1021 438 MS-1022 438 MS-1023 439 MS-1024 439 MS-1025 439 Chapter 70 MSTP System Messages MSTP-1001 441 MSTP-1002 441 MSTP-1003 441 MSTP-2001 441 MSTP-2002 442 Chapter 71 NBFS System Messages NBFS-1001 443 NBFS-1002 443 NBFS-1003 444 Chapter 72 NS System Messages NS-1001 445 NS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 41
Chapter 74 ONM System Messages ONMD-1001 453 ONMD-1002 453 ONMD-1003 453 Chapter 75 PDM System Messages PDM-1001 455 PDM-1002 455 PDM-1003 455 PDM-1004 456 PDM-1005 456 PDM-1006 456 PDM-1007 456 PDM-1008 457 PDM-1009 457 PDM-1010 457 PDM-1011 458 PDM-1012 458 PDM-1013 458 PDM-1014 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 42
466 PMGR-1008 466 PMGR-1009 467 PMGR-1010 467 PMGR-1011 467 Chapter 79 PORT System Messages PORT-1003 469 PORT-1004 469 PORT-1005 469 PORT-1006 470 PORT-1007 470 PORT-1008 470 PORT-1009 470 PORT-1010 471 Chapter 80 PS System Messages PS-1000 473 PS-1001 473 PS-1002 473 PS-1003 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 43
PSWP-1006 476 PSWP-1007 476 Chapter 82 RAS System Messages RAS-1001 479 RAS-1002 479 RAS-1004 479 RAS-1005 479 RAS-1006 480 RAS-2001 480 RAS-2002 480 RAS-2003 480 RAS-3001 481 RAS-3002 481 RAS-3003 481 RAS-3004 481 Chapter 83 RCS System Messages RCS-1001 483 RCS-1002 483 RCS-1003 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 44
Chapter 86 RPCD System Messages RPCD-1001 491 RPCD-1002 491 RPCD-1003 491 RPCD-1004 492 RPCD-1005 492 RPCD-1006 492 RPCD-1007 492 Chapter 87 RTWR System Messages RTWR-1001 493 RTWR-1002 493 RTWR-1003 494 Chapter 88 SAS System Messages SAS-1001 495 Chapter 89 SCN System Messages SCN - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 45
Fabric OS Message Reference 53-1001338-01 SEC-1032 504 SEC-1033 504 SEC-1034 505 SEC-1035 505 SEC-1036 505 SEC-1037 506 SEC-1038 506 SEC-1040 506 SEC-1041 506 SEC-1042 507 SEC-1043 507 SEC-1044 507 SEC-1045 507 SEC-1046 508 SEC-1049 508 SEC-1050 508 SEC-1051 509 SEC-1052 509 SEC- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 46
SEC-1079 515 SEC-1080 515 SEC-1081 515 SEC-1082 515 SEC-1083 516 SEC-1084 516 SEC-1085 516 SEC-1086 516 SEC-1087 517 SEC-1088 517 SEC-1089 517 SEC-1090 518 SEC-1091 518 SEC-1092 518 SEC-1093 518 SEC-1094 519 SEC-1095 519 SEC-1096 519 SEC-1097 520 SEC-1098 520 SEC-1099 520 SEC- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 47
Fabric OS Message Reference 53-1001338-01 SEC-1118 525 SEC-1119 525 SEC-1121 526 SEC-1122 526 SEC-1123 526 SEC-1124 526 SEC-1126 527 SEC-1130 527 SEC-1135 527 SEC-1136 527 SEC-1137 528 SEC-1138 528 SEC-1139 528 SEC-1142 529 SEC-1145 529 SEC-1146 529 SEC-1153 530 SEC-1154 530 SEC- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 48
SEC-1180 536 SEC-1181 536 SEC-1182 536 SEC-1183 536 SEC-1184 537 SEC-1185 537 SEC-1186 537 SEC-1187 538 SEC-1188 538 SEC-1189 538 SEC-1190 539 SEC-1191 539 SEC-1192 539 SEC-1193 539 SEC-1194 540 SEC-1195 540 SEC-1196 540 SEC-1197 541 SEC-1198 541 SEC-1199 541 SEC-1200 541 SEC- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 49
SEC-1310 546 SEC-1311 547 SEC-1312 547 SEC-1313 547 SEC-1314 547 SEC-1315 548 SEC-1316 548 SEC-1317 548 SEC-1318 549 SEC-1319 549 SEC-1320 549 SEC-1321 549 SEC-1322 550 SEC-1323 550 SEC-1324 550 SEC-1325 550 SEC-1326 551 SEC-1327 551 SEC-1328 551 SEC-1329 552 SEC-1330 552 SEC- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 50
SNMP-1004 558 SNMP-1005 558 SNMP-1006 558 SNMP-1007 558 SNMP-1008 559 Chapter 92 SPC System Messages SPC-1001 561 SPC-1002 561 SPC-1003 561 SPC-2001 562 SPC-2002 562 SPC-2003 562 SPC-2004 562 SPC-2005 563 SPC-2006 563 SPC-2007 563 SPC-2008 563 SPC-2009 564 SPC-2010 564 SPC-2011 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 51
Chapter 93 SPM System Messages SPM-1001 571 SPM-1002 571 SPM-1003 571 SPM-1004 571 SPM-1005 572 SPM-1006 572 SPM-1007 572 SPM-1008 572 SPM-1009 573 SPM-1010 573 SPM-1011 573 SPM-1012 573 SPM-3001 574 SPM-3002 574 SPM-3003 574 SPM-3004 574 SPM-3005 575 SPM-3006 575 SPM-3007 575 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 52
SPM-3025 580 SPM-3026 580 SPM-3027 580 Chapter 94 SS System Messages SS-1000 581 SS-1001 581 SS-1002 581 SS-1003 582 Chapter 95 SSM System Messages SSMD-1001 583 SSMD-1002 583 SSMD-1003 583 SSMD-1004 583 SSMD-1005 584 SSMD-1200 584 SSMD-1201 584 SSMD-1202 585 SSMD-1203 585 SSMD- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 53
SULB-1003 591 SULB-1004 592 SULB-1005 592 SULB-1006 592 SULB-1007 592 SULB-1008 593 SULB-1009 593 SULB-1010 599 SULB-1011 599 SULB-1017 599 SULB-1018 600 SULB-1020 600 SULB-1021 600 SULB-1022 601 SULB-1023 601 SULB-1024 601 SULB-1025 602 SULB-1026 602 SULB-1030 602 SULB-1031 602 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 54
SWCH-1010 607 SWCH-1011 608 SWCH-1012 608 SWCH-1013 608 SWCH-1014 608 SWCH-1015 609 SWCH-1016 609 SWCH-1017 609 SWCH-1019 610 SWCH-1020 610 Chapter 98 SYSC System Messages SYSC-1001 611 SYSC-1002 611 SYSC-1003 611 SYSC-1004 612 SYSC-1005 612 Chapter 99 SYSM System Messages SYSM- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 55
TRCE-1008 619 TRCE-1009 619 TRCE-1010 619 TRCE-1011 620 TRCE-1012 620 Chapter 102 TRCK System Messages TRCK-1001 621 TRCK-1002 621 TRCK-1003 621 TRCK-1004 621 TRCK-1005 622 TRCK-1006 622 Chapter 103 TS System Messages TS-1001 623 TS-1002 623 TS-1006 624 TS-1007 624 TS-1008 624 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 56
WEBD-1006 632 WEBD-1007 632 WEBD-1008 632 Chapter 107 XTUN System Messages XTUN-1000 633 XTUN-1001 633 XTUN-1002 633 XTUN-1003 633 XTUN-1004 634 XTUN-1998 634 XTUN-1999 634 XTUN-2000 634 XTUN-2001 635 XTUN-2002 635 XTUN-2003 635 XTUN-2004 635 XTUN-2005 636 Chapter 108 ZEUS System - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 57
ZONE-1026 644 ZONE-1027 645 ZONE-1028 645 ZONE-1029 645 ZONE-1030 646 ZONE-1031 646 ZONE-1032 646 ZONE-1033 646 ZONE-1034 647 ZONE-1036 647 ZONE-1037 647 ZONE-1038 648 ZONE-1039 648 ZONE-1040 648 ZONE-1041 648 ZONE-1042 649 ZONE-1043 649 ZONE-1044 649 ZONE-1045 649 ZONE-1046 650 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 58
671 Chapter 120 AUDIT HTTP System Messages HTTP-1002 673 HTTP-1003 673 Chapter 121 AUDIT IPAD System Messages IPAD-1002 675 Chapter 122 AUDIT PORT System Messages PORT-1006 677 lviii Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 59
PORT-1007 677 PORT-1008 677 PORT-1009 677 Chapter 123 AUDIT SEC System Messages SEC-1113 679 SEC-1114 679 SEC-3001 679 SEC-3002 680 SEC-3003 680 SEC-3004 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 60
SEC-3031 688 SEC-3032 689 SEC-3033 689 SEC-3034 689 SEC-3035 689 SEC-3036 690 SEC-3037 690 SEC-3038 690 SEC-3039 691 SEC-3044 691 SEC-3045 691 SEC-3046 691 SEC-3047 692 SEC-3048 692 SEC-3049 692 SEC-3050 692 SEC-3051 693 Chapter 124 AUDIT SNMP System Messages SNMP-1004 695 SNMP- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 61
SULB-1030 706 SULB-1031 707 SULB-1032 707 SULB-1033 707 SULB-1034 707 SULB-1035 708 SULB-1037 708 Chapter 126 AUDIT SWCH System Messages SWCH-1012 709 SWCH-1013 709 SWCH-1014 709 Chapter 127 AUDIT UCST System Messages UCST-1021 711 UCST-1022 711 UCST-1023 711 UCST-1024 712 UCST-1025 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 62
ZONE-3016 719 ZONE-3017 719 ZONE-3018 720 ZONE-3019 720 ZONE-3020 720 ZONE-3021 720 ZONE-3022 721 ZONE-3023 721 ZONE-3024 721 ZONE-3025 721 lxii Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 63
procedures documented here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc. for 6.3.0, documenting all - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 64
• Brocade 5100 • Brocade 5300 • Brocade 5410 • Brocade M5424 • Brocade 5450 • Brocade 5480 • Brocade 7500 • Brocade 7500E • Brocade 7600 • Brocade 7800 • Brocade 8000 • Brocade Encryption Switch • Brocade DCX • Brocade DCX-4S • Brocade 48000 lxiv Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 65
System Messages" - "ISNS System Messages" - "L2SYS System Messages" - "MFIC System Messages" - "PDM System Messages" - "PLAT System Messages" - "PORT System Messages" - "RCS System Messages" - "RPCD System Messages" - "RTWR System Messages" - "SEC System Messages" - "SNMP System Messages" - "SWCH - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 66
Messages" - "KAC System Messages" - "KSWD System Messages" - "LANCE System Messages" - "LFM System Messages" - "MS System Messages" - "NS System Messages" - "NSM System Messages" - "PMGR System Messages" - "PORT System Messages" lxvi Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 67
as follows: bold text Identifies command names Identifies the names of user-manipulated GUI elements Identifies keywords and operands Identifies text to enter For readability, command names in the narrative portions of this guide are presented in mixed lettercase: for example, switchShow. In - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 68
The following notices and statements are used in this manual. They are listed below in order of increasing severity hazardous to you or cause damage to hardware, firmware, software, or data. DANGER A Danger to Brocade and Fibre Channel, see the Brocade Glossary. For definitions of SAN-specific - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 69
Getting technical help Contact your switch support supplier for hardware, firmware, and software support, including product repairs and part ordering. To expedite your call, have the following information available: 1. General Information • Switch model • Switch operating system version • Software - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 70
located inside the chassis on the port side on the left • Brocade 5000-On the switch ID pull-out tab located on the bottom of the port side of the switch • Brocade 7600-On the bottom of the chassis • Brocade 48000-Inside the chassis next to the power supply bays • Brocade DCX-On the bottom right on - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 71
guide supports Fabric OS v6.2.0 and documents system messages that can help you diagnose and fix problems with a switch or fabric. The messages are organized first by event type, reliability, availability, and serviceability number is persistent across power cycles and switch reboots. • By default - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 72
for more information. Event Auditing Event auditing is designed to support post-event audits and problem determination based on high-frequency events of certain types such as security violations, zoning configuration changes, firmware downloads, and certain types of fabric events. Fabric OS versions - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 73
• PORT related messages: PORT 1006 , firmware, supports the standard syslogd functionality. Configuring for syslogd involves configuring the host, enabling syslogd on the Brocade model, and, optionally, setting the facility level. For the Brocade Guide. Fabric OS Message Reference 3 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 74
. All messages are still sent to the system message log and syslog (if enabled). Port Logs The Fabric OS maintains an internal log of all port activity. Each switch or logical switch maintains a log file for each port. Port logs are circular buffers that can save up to 8000 entries per logical - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 75
portLogEventShow command. portLogTypeEnable Enables an event to report to the port log. Port log events are described by the portLogEventShow command. setVerbose Sets the verbose level of a particular module within the Fabric OS. supportFtp Sets, clears, or displays support FTP parameters or - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 76
(Continued) Command Description supportFfdc Enables and disables FFDC (first is used by your switch service provider to diagnose and correct problems with the switch. The output from is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 contain FR4-18i and FA4- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 77
, HA State out of sync Type to continue, Q to stop: 2004/07/28-17:04:51, [EM-1055], 3,, WARNING, switch, Media 27: Port media incompatible e. Reason: Configured port speed. Type to continue, Q to stop: Clearing the System Message Log To clear the system message log for a particular - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 78
switch:admin> auditcfg --show Audit filter is enabled. 1-ZONE 2-SECURITY 3-CONFIGURATION 4-FIRMWARE 5-FABRIC 3. Enable the audit feature: switch:admin> auditcfg --enable Audit filter is enabled generated on the switch. The RASLog subsystem supports an internationalized timestamp format base on the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 79
in the Fabric OS and reference the cause and actions recommended in this manual. Note that not all message numbers are used; there can be gaps 1 using the errClear command. The sequence number is persistent across power cycles and switch reboots. Audit and/or FFDC/SLOT/CHASS IS/FID Flags For most - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 80
was generated on the switch. The RASLog subsystem will support an internationalized timestamp format base on the "LOCAL" setting. The message module and number. These values uniquely identify each message in the Fabric OS and reference the cause and actions recommended in this manual. Note that not - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 81
switch name. The defined switch name or the chassis name of the switch troubleshooting power port. Responding to a System Message This section provides procedures on gathering information on system messages, including: • Looking Up a System Message • Gathering Information About the Problem • Support - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 82
the steps to produce the problem? - What configuration was in place when the problem occurred? 8. Did a failover occur? 9. Was security enabled? 10. Was POST enabled? 11. Are serial port (console) logs available? 12. Which CP was master? (only applicable to the Brocade DCX, 12000, 24000, or 48000 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 83
help support personnel troubleshoot and diagnose a problem. This section describes those files and how to access and/or save the information for support personnel. 0 is a reference to the blade within the switch platform, for example: Brocade DCC contains FC8-48, FC9-32, and FC8-16 blades. Fabric OS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 84
to access the fabric using fewer physical ports. Access Gateway mode transforms the Brocade switches as well as embedded switches into a device management tool that is compatible with different types of fabrics, including Brocade-, Cisco-, and McDATA-based fabrics. AN Error or warning messages - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 85
lists to all switches in the fabric. Fabric OS system driver module. Firmware blade compatibility errors with control processor (CP). Fibre Channel over IP port configuration messages over Sprint and Marathon Blade. Fibre Channel miscellaneous messages relate to problems with the physical layer - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 86
the identity of the neighbor switch, and to exchange FSPF parameters and capabilities. Health monitor. HSL error messages indicate problems with the Hardware Subsystem Layer of the Fabric OS. HTTP error messages. This raslog generates messages related to port restart failure. IBPD stands for - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 87
daemon (diagd) • Environment Monitor (emd) • EVM daemon (evmd) • Exchange Service Support daemon (essd) • FA-API rpc daemon (rpcd) • Fabric daemon (fabricd) error messages indicate problems with the logical fabric manager module that is responsible for making a logical switch use XISLs. This - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 88
message queue. The Management Service enables the user to obtain information about problems. A group of messages relating to logical switch creation, deletion and configuration. PORT error messages refer to the front-end user ports on the switch. Front-end user ports are directly accessible by users - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 89
messages indicate problems with the System Services Module of the Fabric OS. The software upgrade library provides the firmwareDownload command capability, which enables firmware upgrades to both CP blades with a single command, as well as nondisruptive code load to all 4.x switches. These messages - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 90
option is enabled, an SNMP Guide. Time Service provides fabric time-synchronization by synchronizing all clocks in the fabric to the clock time on the principal switch problems with the Zeus driver module. Indicates problems with the zone library module. The zone module messages indicate any problems - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 91
RASLog Messages Section I This section provides the RASLog messages, including: •AG System Messages 25 •AN System Messages 37 •AUTH System Messages 39 •ANV System Messages 53 •BKSW System Messages 57 •BL System Messages 59 •BLL System Messages 73 •BLS System Messages 75 •BM System Messages - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 92
•FCR System Messages 205 •FICON System Messages 229 •FICU System Messages 255 •FKLB System Messages 261 •FLOD System Messages 263 •FSPF System Messages 265 •FSS System Messages 269 •FSSM System Messages 273 •FW System Messages 275 •HAM System Messages 363 •HAMK System Messages 367 •HIL - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 93
•ONM System Messages 453 •PDM System Messages 455 •PDTR System Messages 461 •PLAT System Messages 463 •PMGR System Messages 465 •PORT System Messages 469 •PS System Messages 473 •PSWP System Messages 475 •RAS System Messages 479 •RCS System Messages 483 •RMOND System Messages 489 •RKD - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 94
- HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 95
. • Some blades and ports in a switch may not support NPIV. NPIV functionality can not be enabled on such ports and they will not respond to NPIV requests. Refer to the Access Gateway Administrator Guide, Appendix B, for specific AG-compatibility requirements. • On non-Brocade switches, refer to the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 96
port>. Probable Cause Indicates the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the specified N_Port. Recommended Action Check the configuration of the fabric switch Cause Indicates Access Gateway mode has been enabled or disabled. Recommended Run the ag -- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 97
system-name>, Invalid port login (PLOGI) response from the fabric on the N_Port . Probable Cause Indicates the fabric switch management server did FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1009 Message , [AG- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 98
system-name>, Sending FDISC failed on N_Port . Probable Cause Indicates there was a failure sending discover F_Port service parameter request from the Access Gateway to the fabric switch. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 99
automatic FTP transfers; then run the supportsave command and contact your switch service provider. Severity WARNING AG-1016 Message , [AG-1016], ,, ERROR, , Host port should not be connected to port , which is configured as N_Port. Indicates that - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 100
INFO AG-1021 Message , [AG-1021], ,, WARNING, , Unable to do Preferred-Failover of F_Port . Failover across different fabric is not supported. Probable Cause Indicates that the failover does not get blocked between two fabrics, although it is not - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 101
is the same. Recommended Action Run the porttrunkarea --show command on the attached switch to display that the Trunk Area is assigned to all ports in the system and run the porttrunkarea --enable command to reconfigure the Trunk Area. Severity ERROR Fabric OS Message Reference 31 53-1001338 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 102
command and contact your switch service provider. Severity WARNING AG-1027 Message , [AG-1027], ,, WARNING, , Unable to handle this login request on port because NPIV capability is not enabled on this port. Probable Cause Indicates NPIV - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 103
action is required. Action Severity WARNING AG-1031 Message , [AG-1031], ,, WARNING, , Loop Detected for device with Port WWN connected to port Probable Cause Indicates that the routing Loop is detected for the device connected to the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 104
], ,, WARNING, ,Port is connected to a Non-Brocade fabric with Persistent ALPA enabled. Check the admin guide for supported configuration . Probable Cause Indicates that one of the ports is connected to a non-Brocade fabric. Recommended No action is required - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 105
Action If the switchshow command on the connected fabric switch port displays 'Persistently disabled: Area has been acquired', then check the cabling on the AG. All trunked ports in a single trunk should belong to the same ASIC Port Group. Severity INFO Fabric OS Message Reference 35 53 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 106
2 AG-1037 36 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 107
or power cycle the Action switch. Severity ERROR AN-1002 Message , [AN-1002], ,, ERROR, , Failed to initialize; rc = Probable Cause Indicates that the initialization of the 'trafd' daemon has failed. Recommended Download a new firmware version - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 108
3 AN-1003 38 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 109
command. Run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1003 Message , [AUTH-1003], ,, INFO, , type has been successfully - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 110
run the supportSave command and contact your switch service provider. Severity WARNING AUTH-1007 Message Probable Cause , [AUTH-1007], ,, ERROR, , The proposed authentication protocols are not supported: port . Indicates that the proposed - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 111
sure the local switch supports the specified problem with the Secure Fabric OS. Recommended Action Reboot or power cycle the switch. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 112
supportSave command and contact your switch service provider. Severity WARNING AUTH-1014 Message , [AUTH-1014], , FFDC, ERROR, , Invalid port value to : port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 113
the supportSave command and contact your switch service provider. Severity ERROR AUTH-1018 Message , [AUTH-1018], ,, ERROR, , Invalid value to check protocol type: port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 114
then run the supportSave command and contact your switch service provider. Severity INFO AUTH-1022 Message < port . Probable Cause Indicates that the authentication process failed to extract a particular value from the receiving payload. Recommended Action Usually this problem - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 115
switch service port number>. Probable Cause Indicates that the authentication process failed to select an authentication value (that is, DH Group, hash value, or protocol type) from a receiving payload for the specified authentication phase. This indicates that the local switch does not support - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 116
your switch service provider. port number>, retval . Probable Cause Indicates that the authentication process failed to get a particular authentication value at certain phase. Data type is the payload or structure that failed to get memory. Recommended Action Usually this problem - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 117
attacks. Recommended Action Usually this problem is transient. The authentication might switch service provider. Severity ERROR AUTH-1033 Message Probable Cause , [AUTH-1033], ,, ERROR, , Disable port due to unauthorized switch - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 118
phase>: port . Probable Cause Indicates that the switch received an unexpected authentication message. Recommended Action Usually this problem is transient ; then run the supportSave command and contact your switch service provider. 48 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 119
run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1038 Message < switch has conflicting authentication policy: Port disabled. Probable Cause Indicates that the neighboring switch has a conflicting authentication policy enabled. The_E-Port - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 120
the port, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch using switch service provider. Severity ERROR AUTH-1042 Message , [AUTH-1042], ,, ERROR, , Port - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 121
and contact your switch service provider. Severity ERROR manually enable the port using the portEnable command. Action Severity ERROR AUTH-1045 Message , [AUTH-1045], ,, ERROR, , Certificate not present in this switch in port - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 122
4 AUTH-1045 52 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 123
BROCADE CONFIDENTIAL ANV System Messages Chapter 5 ANV-1001 Message , [ANV-1001], ,, ERROR, , Port port an internal error. All the ports on the blade or switch will be disrupted. Recommended . If the problem persists, replace the blade. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 124
5 ANV-1004 DRAFT: BROCADE CONFIDENTIAL ANV-1004 Message , [ANV-1004], ,, ERROR, data traffic. Recommended Restart the system at the next maintenance window. If the problem persists, replace the blade. Action Severity ERROR ANV-1005 Message , [ANV - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 125
Severity CRITICAL DRAFT: BROCADE CONFIDENTIAL ANV-1007 5 Fabric OS Message Reference 55 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 126
5 ANV-1007 DRAFT: BROCADE CONFIDENTIAL 56 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 127
found, run supportFtp to send all the core files to a secure server location. Copy the error message and any core file information, and contact your switch service provider. Severity WARNING Fabric OS Message Reference 57 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 128
6 BKSW-1003 58 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 129
not have hardware problems. To run this command root access is required. To run this command root access is required. Refer to the Fabric OS Command Reference Manual for more information on this command. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Additional blade - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 130
have hardware problems. To run this command root access is required. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to failure but was not faulted due to a user setting. Recommended Action Restart or power cycle the blade, using the slotPowerOff and slotPowerOn - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 131
. Run the systemVerification command to verify that the blade does not have hardware problems. To run this command root access is required. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more information on these commands - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 132
attached to the specified port. Run the systemVerification command to verify that the blade or switch does not have hardware problems. To run this command root access is required. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. On a bladed switch, run the slotPowerOff - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 133
or power cycle the switch. If the message persists, replace the blade or the (nonbladed) switch. Severity ERROR BL-1013 Message , [BL-1013], ,, ERROR, , bport port is faulted. status=0x Port will be re-enabled - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 134
7 BL-1015 Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If there is a hardware error, if the slotPowerOff or slotPowerOn fails on the bladed switch or if errors are encountered again: • On the Brocade 24000, and 48000, replace the blade field-replaceable unit (FRU). - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 135
hardware problems. To run this command root access is required. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Initializing... Probable Cause Indicates that the slot has started initializing the ports. Recommended No action is required. Action Severity INFO BL-1018 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 136
initiation failed because one or more of the internal ports was not online. The switch is faulted. Recommended Action Restart or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. To run this command root access is required. Run - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 137
initialization completed. Recommended Action Restart or power cycle the blade. If the firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all GbE or Fibre Channel over IP (FCIP) or Virtualization data elements or FC Fastwrite ports - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 138
an internal port went offline during the warm recovery of the switch. The switch will reboot and start a cold recovery. Recommended Collect supportSave information, then restart the switch and run the diagPost command to ensure Action Power-On Self-Test (POST) is enabled. If the problem persists - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 139
-number>,, INFO, , All GigE/FCIP Virtualization/FC Fastwrite ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded and resulted in the cold upgrade. As - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 140
system timed out while waiting for disable messages from the user ports after disabling the ports. Recommended Action Restart or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. To run this command root access is required. Run the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 141
ports on the chip have been disabled. Recommended No action is required. Action Severity CRITICAL BL-1038 Message , [BL-1038], ,, CRITICAL, , Inconsistent FPGA image version detected, please restart the switch version. Recommended Power cycle the blade - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 142
7 BL-1039 72 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 143
ASIC driver detected Slot port as faulty (reason: ) Probable Cause Indicates a blade regulation problem was correctly, restart or power cycle the blade. Run the systemVerification command to verify that the blade does not have any hardware problems. To run - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 144
8 BLL-1000 Severity CRITICAL 74 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 145
], ,, ERROR, , of GE failed. Please retry the command. Data: inst= st= - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 146
end of the tunnel does not support the Tape Read Pipelining feature. Recommended No action is required. Action Severity INFO BLS-1005 Message , [BLS-1005], ,, ERROR, , S,P [OID 0x8x]: - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 147
the firmwareDownload command. Refer to the release notes to determine whether a non-disruptive firmware download is supported between the revisions. Because the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP blade. If needed, send the AP blade back to the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 148
firmware on slot is not consistent with system firmware . Auto-leveling blade firmware to match system firmware Brocade Action 7500 or 7600, switch off and switch on all primary power to power enable the ports. Action Severity INFO 78 Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 149
-number>,, INFO, , If set, clear EX/VEX/FC Fastwrite configuration for all ports for blade in slot . Probable Cause Indicates the specified blade. On the Brocade Action 7500 or 7600, switch off and switch on all primary power in order to power-cycle the unit. Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 150
On the Brocade Action DCX, 7500 or 7600, turn off and turn on all primary power in order to power-cycle the unit. Severity WARNING BM-1056 Message , [BM-1056], ,, INFO, , AP is not configured. Persistently disabling all ports on the switch. 80 Fabric OS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 151
under a different mode. Recommended Configure the switch to persistently enable all ports. Action Severity INFO BM-1058 Message , [BM-1058], ,, WARNING, , Download of AP firmware failed for the switch. Reissue firmwaredownload to recover. Probable Cause - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 152
10 BM-1058 82 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 153
, Port chip faulted due to an internal error. Probable Cause Internal error. All the ports on the blade or switch will be disrupted. restart the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 154
monitoring of internal hardware reported errors. There is no action required by the user at this time. If any actual hardware failures are detected, a C2-1010 at the next port state change since best effort is no longer supported on a 4G platform or 8G platform long distance port. Recommended No - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 155
>,, WARNING, , , : portcfglongdistance vc_translation_link_init = 1 overwrites fill word identified hardware needs to be replaced. Recommended Power cycle the faulted blade. If the problem persists, replace the blade. Action Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 156
11 C2-1010 86 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 157
chip faulted due to internal error. Probable Cause Indicates an internal error. Recommended Action For a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade to recover the system. For a non-bladed system, perform fastBoot command on the switch to recover - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 158
error occurs, restart the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR CDR-1005 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 159
DRAFT: BROCADE CONFIDENTIAL CEE CONFIG System Messages firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference Manual INFO, , System is ready to accept CEE user commands. Probable Cause Indicates that the Converged Enhanced Ethernet (CEE - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 160
13 CCFG-1005 DRAFT: BROCADE CONFIDENTIAL Probable Cause Indicates that the startup configuration has is updated. Probable Cause Indicates that the startup configuration has been updated by the user. Recommended No action is required. Action Severity INFO CCFG-1006 Message , [CCFG - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 161
DRAFT: BROCADE CONFIDENTIAL 13 CCFG-1009 Probable Cause Indicates that the CMSH initialization has failed. Recommended No action is required. Action Severity ERROR CCFG-1009 Message , [ - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 162
13 CCFG-1012 DRAFT: BROCADE CONFIDENTIAL Probable Cause Indicates that the mentioned slot has failed to reach the Online state within the specified time after system ready event. Recommended Run - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 163
loaded on the standby CP. The standby CP does not support the Advanced Performance Tuning module when the fibre connectivity (FICON) Management Server is enabled. Recommended Action Run the firmwareDownload command to upgrade the firmware on the standby CP. You can also disable FMS on the active - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 164
14 CER-1001 94 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 165
as inconsistent during failover or recovery. Recommended On a Brocade 24000 or 48000 switch, run the slotPowerOff command followed by the slotPowerOn Action command. On a Brocade 7500 or AP7600 switch, reboot or power cycle the switch. Severity ERROR CHASSIS-1004 Message , [CHASSIS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 166
24000 or 48000 switch, run the slotPowerOff command followed by the slotPowerOn command. On a Brocade 200E, 3250, 3850, 3900, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, or AP7600 switch, reboot or power cycle the switch. Severity ERROR 96 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 167
usage on the switch using the memShow command. Reboot or power cycle the Action switch. Severity ERROR CNM Manual for more information on this command. Severity WARNING CNM-1004 Message , [CNM-1004], ,, INFO, , iSCSI service is on the switch - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 168
16 CNM-1005 Probable Cause Indicates that the Crypto service is enabled or disabled on the switch. Recommended No action is required. Action Severity INFO CNM-1005 Message , [CNM-1005], ,, INFO, , Posting event CNM_EVT_GRP_LEADER_ELECTED Name [ - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 169
16 CNM-1009 Recommended No action is required. Action Severity INFO CNM-1009 Message , [CNM-1009], ,, INFO, , Posting event CNM_EVT_STANDALONE_MODE. Probable Cause Indicates that the node is in standalone mode. Recommended No action is required. Action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 170
16 CNM-1013 Recommended No action is required. Action Severity INFO CNM-1013 Message , [CNM-1013], ,, INFO, ,Posting event GL Node Split condition, isolating peer GL node . Probable Cause Indicates that the encryption group (EG) is split. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 171
16 CNM-1017 Recommended No action is required. Action Severity INFO CNM-1017 Message , [CNM-1017], ,, INFO, ,Got JOIN REQUEST from un-recognized GL node [], configured GL node is []. Probable Cause Indicates a join request was received - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 172
16 CNM-1021 Probable Cause Indicates that the Node Admission Control has failed. Recommended No action is required. Action Severity INFO CNM-1021 Message , [CNM-1021], ,, INFO, , Failed to sign the node authentication message, admission control might - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 173
Hdr version Expected Hdr version Node . Probable Cause Indicates that a version mismatch has occurred. Recommended Upgrade the firmware or delete the Node from the encryption group (EG). Action Severity INFO CNM-1027 Message , [CNM-1027], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 174
16 CNM-1029 Probable Cause Indicates that the certificate file for the node already exists. Recommended No action is required. Action Severity INFO CNM-1029 Message , [CNM-1029], ,, WARNING, , Certfile content does not match the cert sent by GL. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 175
16 CNM-1033 Probable Cause Indicates that there is a size mismatch between a node's certificate file and the certificate file received from the group leader. Recommended No action is required. Action Severity WARNING CNM-1033 Message , [CNM-1033], ,, WARNING, - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 176
16 CNM-1037 Probable Cause Indicates an event is being posted to indicate that the cluster is in a converged state. Recommended No action is required. Action Severity INFO CNM-1037 Message , [CNM-1037], ,, INFO, , Split-Brain Arbitration lost!, minority - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 177
INFO CNM-1041 Message , [CNM-1041], ,, INFO, , Updating persistent Cluster DB, please avoid powering off the switch. Probable Cause Indicates the system is updating the persistent database. Recommended No action is required. Action Severity INFO CNM - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 178
16 CNM-1045 Recommended No action is required. Action Severity ERROR CNM-1045 Message , [CNM-1045], ,, ERROR, , Member node is having dual IP stack.Registering member node with dual IP in an EG with only IPV6 is not allowed. Probable Cause - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 179
Gateway Daemon mode mismatch, ensure mode settings are same across all nodes in EG. Probable Cause Indicates mode mismatch between the switches like the Access Gateway mode mismatch. Recommended No action is required. Action Severity ERROR CNM-1052 Message Probable Cause , [CNM - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 180
16 CNM-1053 Recommended No action is required. Action Severity ERROR CNM-1053 Message , [CNM-1053], ,, ERROR, , Node is already a registered member of another EG. First eject the current node from the existing EG and then try. Probable Cause - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 181
16 CNM-1057 Recommended No action is required. Action Severity INFO CNM-1057 Message , [CNM-1057], ,, INFO, , Posting event CNM_EVT_ONLINE Slot , Wwn , IP , flags . Probable Cause Indicates that the encryption engine (EE) is online - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 182
16 CNM-3003 Recommended No action is required. Action Severity INFO CNM-3003 Message , [CNM-3003],,, INFO, , Event: cryptocfg Status: success, Info: Membernode \\ added to encryption group. Probable Cause Indicates a member node was added - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 183
16 CNM-3007 Recommended No action is required. Action Severity INFO CNM-3007 Message , [CNM-3007],,, INFO, , Event: cryptocfg Status: success, Info: Heartbeat timeout set to . Probable Cause Indicates that the heartbeat timeout value was set. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 184
16 CNM-3011 Recommended No action is required. Action Severity INFO CNM-3011 Message , [CNM-3011], ,, INFO, , Event: cryptocfg Status: success, Info: Encryption group synchronized. Probable Cause Indicates an encryption group was synchronized. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 185
of configuration parameters that were downloaded. If Admin Domain (AD) is enabled, the AD number is specified in the description. Recommended No action the classes of configuration parameters that were uploaded. If AD is enabled, the AD number is specified in the description. Recommended No action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 186
Probable Cause Indicates an attempt to download the configuration without disabling the switch was unsuccessful because there are one or more parameters that require the switch to be disabled. Recommended Disable the switch and try to download the configuration. Action Severity WARNING CONF-1023 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 187
17 CONF-1030 CONF-1030 Message , [CONF-1030], ,, WARNING, , Configuration database full, data not committed (key:. Probable Cause Indicates that the previous configuration commands have resulted in a database full - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 188
17 CONF-1041 CONF-1041 Message , [CONF-1041], ,, INFO, , configRemove failed. Probable Cause Indicates a configRemove error has occurred. Recommended Correct the error and try again. Action Severity INFO 118 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 189
Chapter CTAP System Messages 18 CTAP-1001 Message , [CTAP-1001], ,, INFO, , Key acquisition for . Probable Cause Indicates that a change in the tape pool database has triggered the key acquisition process for each - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 190
18 CTAP-1001 120 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 191
, Initiator: , LUN ID: . Probable Cause Indicates the First time encryption, Key expired or Manual re-key operation is performed. The operation has been started, completed or cancelled. Recommended No action is required. Action Severity INFO - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 192
, [CVLC-1007], ,, ERROR, , Removal of encryption LUN is not allowed when decrypt of existing data is enabled.\nContainer: , Initiator: , LUN ID: . Indicates that there has been an attempt to remove the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 193
CVLC-1008 Recommended Action If you want to preserve the user data, use cryptocfg --modLUNpolicy -cleartext to convert to clear the tape container is configured with non-Brocade mode but there is no valid license. Recommended Obtain license for non-Brocade mode. Action Severity ERROR Fabric OS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 194
is in wrong format ().\nContainer: , engine is unable to retrieve the key record base on the key ID found in the metadata. ERROR, , Missing Key ID from user input.\nContainer: , Initiator: < - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 195
19 CVLC-1015 Recommended Use cryptocfg command to add the key ID, if available. Action Severity ERROR CVLC-1015 Message , [CVLC-1015], ,, ERROR, , LUN is set to read only mode. Reason: .\nContainer: - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 196
>, [CVLC-1021], ,, INFO, , User provided key ID is ignored while metadata exists.\nContainer: , Initiator: , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 197
19 CVLC-1022 CVLC-1022 Message , [CVLC-1022], ,, INFO, , User provided key ID is ignored while data state is clear text.\nContainer: , Initiator: , LUN ID: < - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 198
19 CVLC-1022 128 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 199
Check the memory usage on the switch using the memShow command. Restart or power cycle the Action switch. Severity ERROR CVLM-1002 Message < Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference Manual for more information on - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 200
the Fabric OS Command Reference Manual for more information on this command. Severity WARNING CVLM-1005 Message , [CVLM-1005], ,, INFO, , Crypto service is on the switch. Probable Cause Indicates that Crypto service is enabled or disabled on the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 201
20 CVLM-1009 Recommended Check the ISL port connected to the fabric. Action Severity WARNING CVLM-1009 Message , [CVLM-1009], ,, INFO, , The member - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 202
20 CVLM-3001 Recommended No action is required. Action Severity INFO CVLM-3001 Message , [CVLM-3001], ,, INFO, , Event: cryptocfg Status: success, Info: Failback mode set to . Probable Cause Indicates that the failback mode was set. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 203
20 CVLM-3005 Recommended No action is required. Action Severity INFO CVLM-3005 Message , [CVLM-3005], ,, INFO, , Event: cryptocfg Status: success, Info: Cluster member removed from HA cluster . Probable Cause Indicates an HA cluster member - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 204
[CVLM-3009], ,, INFO, , Event: cryptocfg Status: success, Info: Manual failback from EE / to EE /. Probable Cause Indicates a manual failback was performed to an encryption engine. Recommended No action is required - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 205
20 CVLM-3013 Probable Cause Indicates an initiator was removed from a cryptotarget container. Recommended No action is required. Action Severity INFO CVLM-3013 Message , [CVLM-3013], ,, INFO, , Event: cryptocfg Status: success, Info: LUN , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 206
, Info: Lun , attached through Initiator \\, in crypto target container \\ enabled. Probable Cause Indicates a LUN in a cryptotarget container was enabled. Recommended No action is required. Action Severity INFO CVLM-3017 Message , [CVLM - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 207
Message , [CVLM-3021], ,, INFO, , Event: cryptocfg Status: success, Info: Manual rekey all performed. Probable Cause Indicates a complete manual rekey was performed. Recommended No action is required. Action Severity INFO CVLM-3022 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 208
20 CVLM-3024 CVLM-3024 Message , [CVLM-3024], ,, INFO, , Event: cryptocfg Status: success, Info: Transaction aborted. Probable Cause Indicates a transaction abort operation was performed. Recommended No action is required. Action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 209
INFO DOT1-1003 Message , [DOT1-1003], ,, INFO, 802.1X is enabled for port . Probable Cause Indicates that the 802.1X is enabled for a particular port. Recommended No action is required. Action Severity INFO DOT1-1004 Message Probable Cause - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 210
timestamp>, [DOT1-1006], ,, WARNING, 802.1X Authentication has failed on port . Probable Cause Indicates that the authentication has failed on a particular port. Recommended Check the credentials configured with Supplicant and the RADIUS server. Action Severity WARNING - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 211
No action is required. Action Severity INFO DOT1-1010 Message , [DOT1-1010], ,, INFO, Port is set in auto mode. Probable Cause Indicates that the port is set to auto mode. Recommended No action is required. Action Severity INFO Fabric OS Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 212
21 DOT1-1010 142 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 213
range of the switch. Refer to the Hardware Reference Manual for the environmental temperature range of your switch. Run the fanShow is faulted. Recommended Action On Brocade 24000 and 48000, try reseating the specified FRU. Restart or power cycle the switch. Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 214
and an optional number to identify the unit, slot, or port. The Brocade 3250 has one power supply and three fans, and the Brocade 3850 has two power supplies and four fans. Values for the individual fans and power supplies for these switches might display, but these parts cannot be replaced: the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 215
exceeded environmental limits. A reset is sent to the faulty slot or the switch for nonbladed switches. Recommended Action There is most likely a voltage hardware problem on the blade or motherboard of the switch. For the Brocade DCX, 24000 and 48000, replace the blade field-replaceable unit (FRU - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 216
the FRU. Refer to the Brocade 48000 Hardware Reference Manual for more information about chassisConfig modes and supported blades. Severity CRITICAL EM-1010 ; however, after four seconds it cannot be determined if it has powered down or not. Recommended Try reseating the blade. If this fails to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 217
or hardware problems on the switch. Recommended Action On Brocade DCX, 24000 power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. To run this command root access is required. Refer to the Fabric OS Command Reference Manual - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 218
problem was discovered when performing consistency checks during a cold boot. Recommended Action Monitor the switch and contact your switch service provider. Severity user did not commit a changed world wide name (WWN) value prior to executing a reboot, power with standby firmware version (Pre 4.4), - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 219
the current chassisConfig option is not supported by the firmware on the standby control processor (CP problem. The FRU ID value is composed of a FRU type string and an optional number to identify the unit, slot, or port. Recommended Action If the message persists, reboot or power cycle the switch - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 220
-48 port blade) if the field-replaceable unit (FRU) is intended for use. Refer to the appropriate hardware manual for instructions on inserting the switch FRU. Run the systemVerification command to verify that the switch does not have hardware problems. To run this command root access is required. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 221
22 EM-1035 EM-1035 Message , [EM-1035], ,, ERROR, , 2 circuit paired Power Supplies are faulty, please check the AC main switch/circuit to see if it has power. Fabric OS Message Reference 151 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 222
Recommended Action Reseat the FRU card. If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. To run this command root access is required. Refer to the Fabric OS Command Reference for more information - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 223
Recommended If the message is isolated, monitor the error messages on the switch. If the message is associated Action with other messages, follow the sequence-number>,, WARNING, , Can't power on , its logical switch is shut down Fabric OS Message Reference 153 53-1001338- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 224
is indicating a predicted failure. If new_state is Down (not enough power), a newly inserted port blade was not powered on because there was not enough power available. Recommended The Brocade 24000 requires only a single power supply for a fully populated chassis; however, you Action should always - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 225
access to the field-replaceable unit (FRU) has become available again. Recommended The EM-1029 error can be a transitory error; if the problem resolves, the EM-1048 message is Action displayed. Severity INFO EM-1049 Message , [EM-1049], ,, INFO, , FRU - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 226
-1058 Message , [EM-1058], ,, WARNING, , Switch gets reset: Probable Cause Indicates the switch is being automatically reset because of a known resetable transient problem such as an application-specific integrated circuit (ASIC) parity error - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 227
blade. Make sure the replacement is compatible with your switch type. Action Severity ERROR EM-1060 Message , or run haSyncStart. Probable Cause Indicates a blade in the system is not supported by the release on the standby control processor (CP). Recommended Action Remove all - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 228
powered off (based on user configuration power off the problem blade when such a condition occurred. Recommended Contact the switch provider for support. Action Severity CRITICAL EM-1065 Message , [EM-1065], ,, WARNING, , SSAS Virtualization Services - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 229
incompatible Fabric OS or Storage Application Services (SAS) firmware has been upgraded and is now problems on the switch. Recommended Reboot or power cycle the switch. If the message persists, collect switch information using the Action supportsave command, and contact your switch service - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 230
specified FRU. On nonbladed switches, reboot or power cycle the switch. If the problem persists: • Run the systemverification command to verify that the switch does not have hardware problems. To run this command root access is required. Refer to theFabric OS Reference Manual for more information on - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 231
Action Discontinue the firmware download, identify the downlevel switch or switches that do not support the Coordinated HotCode protocol, and upgrade the downlevel switches. Then, restart the firmware download on this switch. Note that upgrading a downlevel Brocade switch in a mixed interop - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 232
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the resume message which prevented the the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended No action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 233
-name>, Slot ENABLED but Not Ready during recovery, disabling slot = (). Probable Cause Indicates that the slot state has been detected as inconsistent during failover or recovery. Recommended On a Brocade 8000 switch, restart or power cycle the switch. Action Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 234
On a Brocade 8000 switch, restart or power cycle the switch. Action firmware version on standby that supports NPIV functionality, using the firmwareDOwnload Action command. Severity WARNING ESW-1007 Message , [ESW-1007], ,, WARNING, ,Switch port - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 235
. Probable Cause Indicates that the blade has area swapped ports on ports that do not support this feature. Recommended Replace the blade with ports that support port swap. Refer to the Fabric OS Administrator's Guide Action for more information. Severity WARNING Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 236
24 ESW-1008 DRAFT: BROCADE CONFIDENTIAL 166 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 237
EVMD System Messages 25 EVMD-1001 Message , [EVMD-1001], ,, WARNING, , Event could not be sent to remote proxy. = Probable Cause Indicates the event could not be sent to remote proxy. This could happen if the remote proxy - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 238
25 EVMD-1001 168 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 239
Cause Indicates that an internal link service (ILS) information unit of invalid size has been received. The neighbor switch has sent a payload with an invalid size. Recommended Action Investigate the neighbor switch for problems. Run the errShow command on the neighbor switch to view the error log - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 240
switch service provider. Severity WARNING FABR-1004 Message , [FABR-1004], ,, WARNING, , port: - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 241
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1007 Message , [FABR-1007], information unit. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action In case of severe - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 242
message is rare and usually indicates a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FABR-1011 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 243
not enough memory in the switch for the fabric module to allocate. This message is rare and usually indicates a problem with the Fabric OS. switch service provider. Severity CRITICAL FABR-1014 Message , [FABR-1014], , FFDC, ERROR, , Port - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 244
system-name>, ficonMode is enabled. Probable Cause Indicates that FICON mode is enabled on the switch through a user interface command. Recommended No name>, Critical fabric size () exceeds supported configuration (). 174 Fabric OS Message Reference 53- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 245
> days hours and minutes. Probable Cause Indicates that this switch has a value-line license and has a limited number of domains. If more system-name>, Fabric size () exceeds supported configuration (). Fabric limit timer () started from - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 246
system-name>, Fabric size is within supported configuration (). Fabric limit timer the limit set by your value-line switches. Value-line switches have a limited fabric size, i.e., a ,, INFO, , Port negotiated - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 247
modes, the buffer credits are fixed, based on the port configuration information. In this mode, the port exceeded. Probable Cause Indicates the fabric exhausted the maximum number of retries sending internal link service WARNING, , Remote switch with domain ID - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 248
You must manually enable the port or the port remains disabled forever. Refer to the Admin Guide for more enabled port. Persistently disabling port . Probable Cause Indicates the specified port is being disabled because when the port on a Switch is Trunk Area enabled - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 249
is being disabled because when the port attempts to go online, the Switch finds that Trunk Area enabled is incompatible with port configuration such as long distance, port mirror, fast write or EX_port. Recommended Check the port configuration to disable long distance, port mirror, fast write or - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 250
firmware to a VF-capable firmware. Severity ERROR FABR-1045 Message Probable Cause , [FABR-1045], , ERROR, , Detected Base Switch conflict with remote (not neighbor) switch (domain ), BS . No local E-ports - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 251
that the remote switch has a Base Switch attribute conflict with the local switch. All the E_ports directly connected to the conflicting switch are disabled. Recommended Make sure that all the switches in the fabric have the same Base Switch attribute or upgrade the Action switch firmware to a VF - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 252
26 FABR-1046 182 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 253
by the software. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1004 Message , [FABS-1004], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 254
media state to blade driver Recommended Action If the message is isolated, monitor the error messages on the switch. If the error is problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 255
unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1011 Message Probable Cause , [FABS-1011 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 256
problem. Recommended Action Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware inability to read the FRU header, or the blade may not be supported by this platform or Fabric OS version. Recommended Action Verify that the blade - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 257
specified FRU could not be enabled. This is usually an internal Fabric OS problem. Recommended Action Try removing and reinserting the FRU. Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR Fabric OS Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 258
27 FABS-1015 188 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 259
communicate. Recommended Action The problem can be corrected by changing the version of firmware on the CP or AP blades. The firmware version on the CP firmwareDownload is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 260
28 FBC-1001 190 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 261
is low on memory and failed to allocate new memory for an information unit (IU). Recommended A nonbladed switch will automatically reboot. For a bladed switch, the active CP blade will Action automatically fail over and the standby CP will become the active CP. Severity CRITICAL Fabric OS Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 262
29 FCMC-1001 192 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 263
sequence-number>, FFDC, ERROR, , of GE failed. Please retry the command. Data: inst= st that an FIPS failure has occured and requires faulting the blade or switch. Recommended Retry the command. Action Severity CRITICAL FCIP-1002 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 264
-1004 Message , [FCIP-1004], , INFO, CFG, , Tape Read Pipelining is being disabled slot () port () tunnel (). Probable Cause Indicates that the FOS version on the remote end of the tunnel does - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 265
DRAFT: BROCADE CONFIDENTIAL FCOE System Messages Chapter 31 FCOE-1001 Message , [FCOE-1001], ,, ERROR, , calloc failed for . Probable Cause Indicates a memory failure. Recommended Check the switch memory status. Action Severity ERROR FCOE-1002 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 266
31 FCOE-1005 DRAFT: BROCADE CONFIDENTIAL Recommended Remove the failed member from the login group. Action Severity ERROR FCOE-1005 Message , [FCOE-1005], ,, ERROR, , : - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 267
DRAFT: BROCADE CONFIDENTIAL 31 FCOE-1009 Recommended No action is required. Action Severity INFO FCOE- -number>,, ERROR, , Cleanup of login failed for port:. Probable Cause Indicates an invalid port number. Recommended Use the supportsave command and restart the system. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 268
31 FCOE-1013 DRAFT: BROCADE CONFIDENTIAL Recommended Rerequest to delete port from VLAN. Action Severity ERROR FCOE-1013 Message , [FCOE-1013], ,, ERROR, , Request to add VLAN failed. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 269
DRAFT: BROCADE CONFIDENTIAL 31 FCOE-1017 Recommended The VLAN may be in use; delete MACs from L2 for slot/port failed. Probable Cause Indicates a delete request for slot or port has failed. Recommended Rerequest to add MACs from L2 for slot/port. Action Severity ERROR Fabric OS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 270
31 FCOE-1018 DRAFT: BROCADE CONFIDENTIAL 200 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 271
firmware on the device controller on the specified port has a defect. Action Check with the device vendor for a firmware supported in this port type Probable Cause Indicates that private devices will not respond to the switch port login (PLOGI) during probing. Recommended Action The Brocade - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 272
32 FCPD-1003 202 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 273
for a Fibre Channel driver instance. The function can only be " fc_create". This function creates a Fibre Channel driver instance. The failed support authentication has tried to log in to the switch when the device authentication policy is in ON status on the switch. Recommended Action Enable - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 274
33 FCPH-1002 204 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 275
action is required. Action Severity INFO FCR-1003 Message , [FCR-1003], ,, INFO, ,FC router physical devices newly exported at port . Probable Cause Indicates that one or more physical devices have been newly exported through the specified - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 276
the cables and SFPs if necessary. Severity INFO FCR-1005 Message , [FCR-1005], ,, INFO, , FC router LSAN zone device removed at port . Probable Cause Indicates that a device is removed from the logical storage area network (LSAN) zone in the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 277
edge fabric. Recommended No action is required. Action Severity INFO FCR-1009 Message , [FCR-1009], ,, INFO, , FC router LSAN zone enabled at port : . Probable Cause Indicates that a logical storage area network (LSAN) zone was - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 278
, [FCR-1012], ,, INFO, , FC Router fabric build completed on port . Probable Cause Indicates that the fibre channel router has completed a fabric build at the specified port. Recommended No action is required. Action Severity INFO FCR-1013 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 279
FC router proxy device entries exhausted on port . Probable Cause Indicates that the number of proxy devices is greater than allowed by the port how many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 280
of translate domains). You can also limit the number of proxy devices for a translate domain (which limits the number of translate domain ports required) by limiting the devices specified in logical storage area network (LSAN) zones. Severity WARNING 210 Fabric OS Message Reference 53-1001338 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 281
that WWN conflicts will occur as a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large number of logical re-enabled. Severity INFO FCR-1027 Message , [FCR-1027], ,, INFO, , In slot port WWN - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 282
be disabled then re-enabled. Severity INFO FCR-1028 Port world wide name (WWN) pool has rolled over in the specified slot, and WWN entries detected not in use are reused as needed. Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 283
No action is required. Action Severity INFO FCR-1032 Message , [FCR-1032], ,, INFO, , Edge fabric enabled security on port in fabric . Probable Cause Indicates that Secure mode was turned on in the edge fabric. Recommended No - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 284
in the backbone fabric. Probable Cause Indicates that the specified logical storage area network (LSAN) zone was enabled in the backbone fabric. The enabled LSAN zone configuration is listed. Recommended No action is required. Action Severity INFO FCR-1037 Message , [FCR-1037 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 285
: . Probable Cause Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the local switch&apos zone database limitations. Recommended Remove excess cfg/zone/alias entries so that the number of logical storage area network (LSAN) Action zones - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 286
was not set. Recommended Action Setting port credits failed. Execute the portEnable command. If the problem persists try restarting the switch. If the message persists, collect switch information using the supportShow command, and contact your switch service provider. Severity ERROR FCR-1049 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 287
enable and disable the port. If the problem persists contact your switch service provider. Severity ERROR FCR-1053 Message , [FCR-1053], ,, WARNING, , Port - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 288
routing is not needed. Otherwise replace the switch with Action one that supports backbone to edge routing. Severity INFO FCR- switch that did not match the insistent domain ID of this port. Recommended Action Check the switches on both ends of the link for a possible mismatch in switch or port - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 289
, [FCR-1060], ,, WARNING, , EX_Port() has an incompatible configuration setting. Probable Cause Indicates that virtual channel (VC) Link Init is enabled on the local switch and the remote switch is negotiating in R_RDY mode. The fabric might not - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 290
supported EX_ports or VEX_ports was exceeded. To enable the specified port, disable any other operational port then re-enable the port the fabric ID of the switch does not match the local switch. Recommended Run the switchShow -name>, Fabric ID of backbone FC-Routers mismatch or overlap. Probable - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 291
the fabric connected to the specified port. Recommended Action If the fabric split, then merge the fabrics and manually re-enable the port. If there is another fabric the fcrState set to 2 (disabled). Note that the FC Routing service is disabled by the factory. Recommended No action is required - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 292
34 FCR-1070 Probable Cause Indicates that the FC Routing service is enabled. This is caused by either fosConfig --enable fcr, or a configDownload with the fcrState set to 1 (enabled). Note that the FC Routing service is disabled by the factory. Recommended No action is required. Action Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 293
is larger than characters in the edge fabric connected to port . Probable Cause Indicates that the zone name configuration size created in the connected fabric exceeds the maximum supported by the FC Router. This size is equal to the total number of characters used by - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 294
re-enable the port. Recommended Make sure to remain within the maximum of supported front domains. Action Severity ERROR FCR-1077 Message , [FCR-1077], ,, WARNING, , Port rejected fabric binding request/check from the M-Model switch; - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 295
the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the result of the rejected pause >. Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the pause message which prevented the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 296
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the pause message which prevented not support Condor2 based EX_ports. Indicates that the remote control processor (CP) has older firmware, which does not support Condor-based EX_ port. This - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 297
34 FCR-1087 Recommended Disable Condor2-based EX_ports or upgrade the remote CP. Action Severity ERROR FCR-1087 -name>, LSAN tag added. Probable Cause Indicates that the user has added a LSAN tag. Recommended No action is required. Action Severity INFO FCR-1089 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 298
-name>, FCR ELS trap entries exhausted. Probable Cause Indicates that the FCR ELS trap entries are exhausted. Recommended Collect supportsave data and send it to support. Action Severity ERROR 228 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 299
: This is a 1 byte hexidecimal value that represents the domain of the switch that the FICON Channel is directly connected to. HP - Host Port number: This is a 1 byte hexidecimal value that represents the switch port of the switch that the FICON Channel is directly connected to. DD - Device Domain - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 300
Block ID Emulation Enabled or Disabled>. Probable Cause Indicates the configuration was changed manually. Recommended No action is required. Action Severity INFO FICN-1006 Message , [FICN-1006], ,, WARNING, , FICON GEPort < 0 or 1 - GE port number> TID - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 301
to read the sense data. Recommended If there was a job failure associated with this event, please contact your vendor's customer support Action for assistance. Severity INFO FICN-1010 Message , [FICN-1010], ,, INFO, , DevDiskEgr:Device level exception - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 302
the FICON Channel. Recommended If there was a job or IO failure associated with this event, please contact your vendor's customer Action support for assistance. Severity INFO FICN-1011 Message , [FICN-1011], ,, ERROR, , DevDiskIng:XRC Incorrect RRS SeqNum - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 303
that indicated device level exception. Recommended If there was an IO failure associated with this event, please contact your vendor's customer support Action for assistance. Severity INFO FICN-1015 Message , [FICN-1015], ,, ERROR, , DevEgr:cuPath=0x - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 304
the FICON Control Unit sent a frame that cannot be associated with a FICON Control Unit CUADDR. Recommended Contact your vendor's customer support for assistance. Action Severity ERROR FICN-1019 Message , [FICN-1019], ,, ERROR, , DevTapeEgr:AS Link Level - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 305
device in emulation. Recommended If there was an unexpected job failure associated with this event, contact your vendor's customer Action support for assistance. Severity ERROR FICN-1022 Message , [FICN-1022], ,, ERROR, , DevTapeEgr:FICON Selective Reset - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 306
. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your vendor's Action customer support for assistance. Severity INFO FICN-1027 Message Probable Cause , [FICN-1027], ,, ERROR, , DevTapeIng:Device level - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 307
. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your vendor's Action customer support for assistance. Severity ERROR FICN-1029 Message , [FICN-1029], ,, ERROR, , HostDiskIng:FICON Selective Reset:Path - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 308
35 FICN-1031 FICN-1031 Message , [FICN-1031], ,, WARNING, , HostDiskIng:FICON System Reset received on Path=. Probable Cause Indicates the FICON channel sent a System Reset to the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 309
the peer. This indicates that the channel side noted corruption from the device/CU side processing. Recommended Contact your vendor's customer support for assistance. Action Severity ERROR FICN-1035 Message , [FICN-1035], ,, WARNING, , HostIng:FICON System - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 310
channel. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your vendor's Action customer support for assistance. Severity ERROR FICN-1041 Message , [FICN-1041], ,, ERROR, , HostTapeEgr:AS Link Level Reject - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 311
the CU has lost the logical path to the LPAR. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1042 Message , [FICN-1042], ,, WARNING, , HostTapeIng:FICON Cancel received Path - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 312
FICON channel. This is performed during the path recovery. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity WARNING FICN-1046 Message , [FICN-1046], ,, WARNING, , HostTapeIng:LRJ received - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 313
it no longer has an established path to its peer. Recommended This is an unexpected event; contact your vendor's customer support for assistance. Action Severity WARNING FICN-1050 Message , [FICN-1050], ,, WARNING, , ProcessEgrTirData:Lost Logical Path - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 314
to break an XRC session with the extended DASD device. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity INFO FICN-1053 Message , [FICN-1053], ,, INFO, , XRC Withdraw From Session: SessID - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 315
to break an XRC session with the extended DASD device. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity WARNING FICN-1056 Message , [FICN-1056], ,, ERROR, , FICON Emulation Error Error Code - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 316
This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1060 Message , Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1062 Message , [ - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 317
=0x. Probable Cause Indicates an abort operation has been received from a local FC interface for an exchange. Recommended If there were associated IO errors at the same time as this event, contact your vendor's customer Action support for assistance. Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 318
or there is an internal memory leak, contact your vendor's customer support for assistance. Severity WARNING FICN-1067 Message , [FICN-1067], Cause Indicates an abort operation has been received from a local FC interface for an emulaton CU exchange. Recommended If there were - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 319
pipelining and not the unit check. If there are associated Action IO error messages with this event, please contact your vendor's customer support for assistance. Severity INFO FICN-1071 Message , [FICN-1071], ,, INFO, , HostTapeIngr:Tape Loaded on Path - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 320
35 FICN-1073 FICN-1073 Message , [FICN-1073], ,, INFO, , HostTapeIngr:Unloaded:Path= :states=0x:cmds=0x - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 321
35 FICN-1076 Severity INFO FICN-1076 Message , [FICN-1076], ,, INFO, , HostTapeIngr:ReadCpReport:Path= :Emuls=0x - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 322
35 FICN-1079 Recommended No action is required. Action Severity INFO FICN-1079 Message , [FICN-1079], ,, INFO, , DevTapeEgr:WriteReport:Path= :Emuls=0x - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 323
VEPortNumber> Domain=0x Port=0x. Probable Cause Indicates an attached port which had a FICON emulated path established has logged out from the switch. Recommended This may be an unexpected event, contact your vendor's customer support for assistance. Action Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 324
>,tunnel Id=. Probable Cause Indicates a FICON FCIP tunnel to the peer switch has been terminated. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR 254 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 325
. Recommended Action If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a nonbladed switch, download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference Manual for more information on these commands - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 326
PID format to core PID using the configure command and re-enable fmsMode using the ficonCupSet command. Refer to the Fabric OS Administrator's Guide for information on core PID mode and the Fabric OS Command Reference Manual for information on these commands. Severity WARNING FICU-1005 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 327
the supportSave command and contact your switch service provider. Severity WARNING FICU-1008 Message , [FICU-1008], ,, WARNING, , FMS mode has been enabled. Ports: have been disabled due to port address conflict. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 328
], ,, WARNING, , FMS Mode enable failed due to address conflict with port . Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode (fmsMode) was not enabled because the specified port which has an address conflict with the CUP - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 329
36 FICU-1014 FICU-1014 Message , [FICU-1014], ,, INFO, , CUP SBTOV Timeout - %s, Type(%s). Probable Cause Indicates that the FICON Host failed to send an IU within the SBTOV. Recommended No Action is required. Action Severity INFO FICU-1015 Message < - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 330
36 FICU-1016 260 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 331
WARNING, , exchange overlapped, pid= Probable Cause Indicates that the FC kernel driver has timed out the exchange while the application is still active. When the FC kernel driver reuses the exchange, the application will overlap. This happens on a timed-out exchange; it - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 332
37 FKLB-1001 262 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 333
, FFDC, WARNING, , Unknown LSR type: port , type Probable Cause Indicates that the link can support. Recommended Reduce the number of switches in the fabric or reduce the number of redundant ISLs between two Action switches. Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 334
38 FLOD-1006 Probable Cause Indicates that the received LSR contained an invalid domain number. Recommended No action is required because the LSR is discarded. Action Severity WARNING FLOD-1006 Message , [FLOD-1006], ,, WARNING, , Transmitting invalid - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 335
Message , [FSPF-1001], ,, ERROR, , Input Port out of range Probable Cause Indicates that the specified input port number is out of range; it does not exist on the switch. Recommended No action is required. Action Severity ERROR FSPF-1002 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 336
port. The section ID is used to identify a set of switches that share an identical topology database. The section ID is implemented inside the protocol. The error message itself will indicate the mismatched section ID. It should be set to 0 for a non-hierarchical fabric. Brocade switches support - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 337
Recommended No action is required. Action Severity INFO 39 FSPF-1008 Fabric OS Message Reference 267 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 338
39 FSPF-1008 268 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 339
persists, run the supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSS-1002 Message , [FSS-1002], , SLOT cp-slot-number | CHASSIS, WARNING, , Component - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 340
message persists, run the supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSS-1004 Message , [FSS-1004], , SLOT cp-slot-number | CHASSIS, ERROR, , Memory - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 341
to validate the network configuration; then try to restore the synchronization by issuing the haSyncStart command. If the problem persists, contact your switch service provider. Severity CRITICAL FSS-1008 Message , [FSS-1008], , SLOT cp-slot-number | CHASSIS, CRITICAL - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 342
40 FSS-1011 FSS-1011 Message , [FSS-1011], , SLOT cp-slot-number | CHASSIS, INFO, , FSS Info: . Probable Cause Indicates an informational message only. Recommended No action is required. Action Severity INFO 272 Fabric OS Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 343
the Fabric OS Command Reference Manual. Recommended No action is was logged as a result of a user-initiated action (such as running the problem. If the problem persists, run the supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 344
fails, the failover will be disruptive. In a switch system, this message is logged when a firmware upgrade or downgrade was invoked. The new firmware version is not compatiable with the current running version. This causes a disruptive firmware upgrade or downgrade. Recommended For a dual CP system - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 345
this message as is appropriate to the particular policy of the end-user installation. To prevent recurring messages, disable the changed alarm for operational range of the switch. Refer to the hardware reference manual for the environmental temperature range of your switch. Severity WARNING FW- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 346
is . Probable Cause Indicates that the internal temperature of the switch has changed from a value outside of the acceptable range to a value within problems. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 347
it is seated correctly in the chassis. Run the psShow command to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 Message Probable Cause , [FW-1010], ,, WARNING, - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 348
is correctly seated in the Action chassis. If the problem persists, replace the faulty power supply. Severity WARNING FW-1011 Message , [FW message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1033 Message , [FW-1033], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 349
message as is appropriate to the particular policy of the Action end-user installation. Severity WARNING FW-1035 Message , [FW-1035], Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 350
=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has fallen below the low boundary. particular policy of the Action end-user installation. Severity INFO 280 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 351
Label>, is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has fallen below the low boundary. The transmit performance area measures the amount of outgoing laser - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 352
Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has changed from a message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1045 Message , [FW-1045], < - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 353
acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1049 Message , [FW-1049], ,, INFO, , , value has changed(High= - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 354
acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1113 Message , [FW-1113], ,, INFO, , , value has changed(High= - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 355
by transient errors. A low number of E_Port failures means that the switch is functioning normally. Recommended No action is required. Respond to this message message as is appropriate to the particular policy of the end-user installation. Check both ends of the physical connection and verify that - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 356
a transient error and might not require troubleshooting. Severity INFO FW-1118 Message , can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to the particular policy of the Action end-user installation. Severity INFO FW-1119 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 357
has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1122 Message , [FW-1122], ,, INFO, , , is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 358
to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 359
two switches. • Incompatible link parameters. During E_Port initialization, ports ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 360
the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1130 Message , [FW-1130], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 361
message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1132 Message , [FW-1132], fabric logins has fallen below the low boundary. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 362
range to a value within the acceptable range. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1137 Message , [FW-1137], < - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 363
a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Fabric OS Message Reference 293 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 364
physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. A low number of link loss errors means that the switch is functioning normally - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 365
troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity INFO FW-1165 Message , [FW-1165], ,, INFO, , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 366
troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity WARNING FW-1167 Message , [FW-1167], ,, INFO, , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 367
the switch is functioning normally. Severity INFO FW-1170 Message , [FW-1170], ,, WARNING, , , to the particular policy of the end-user installation. Frequent loss of signal generally indicates a physical problem. Check both ends of your cable - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 368
protocol errors occur due to hardware problems. A low number of protocol errors means that the switch is functioning normally. Recommended No Action end-user installation. Severity INFO FW-1174 Message , [FW-1174], ,, WARNING, , , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 369
number of invalid words that the port experiences has changed. Invalid words usually indicate a hardware problem with an small form-factor switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 370
port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Invalid words usually indicate a hardware problem policy of the Action end-user installation. A low number of invalid CRCs means that the switch is functioning normally. Severity INFO - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 371
Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1185 Message , [FW-1185], ,, INFO, , , , is below low boundary(High=, Low=). Current value is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 372
. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1188 Message , [FW-1188], ,, INFO, , , , value has changed(High=, Low=). Current value is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 373
Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1190 Message , [FW-1190], ,, INFO, , , , is above high boundary(High=, Low=). Current value is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 374
. A low number of port state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1194 Message , [FW-1194], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 375
Indicates that the number of link resets that the port experiences has changed. Link resets occur due to the end-user installation. A low Action number of link resets means that the switch is functioning activity at all. Both physical and hardware problems can cause link resets to increase. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 376
. Recommended Respond to this message as it is appropriate to the particular policy of the end-user installation. A Action low number of C3 discard means that the switch is functioning normally. Severity INFO FW-1202 Message , [FW-1202], ,, WARNING, - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 377
Check the target device; it could be slow. Action Severity INFO FW-1204 Message , [FW-1204], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the trunk - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 378
, , , been detected in the FC frame. Invalid CRC messages large numbers of messages indicate a problem in this area. Severity INFO FW have been detected in the FC frame. Invalid CRC messages problem in this area. A low level of invalid CRC errors means that the switch - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 379
indicates that errors have been detected in the FC frame. Invalid CRC messages occur when the number figure (or higher) values for CRC errors indicate problems. When an "above" message is received, to the particular policy of the Action end-user installation. Severity INFO FW-1240 Message Probable - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 380
fluctuations, and aging equipment. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of CRC errors means that the fabric is functioning normally. The CRC error area of the End-to-End Performance - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 381
that the number of end-to-end (EE) word frames that the switch receives has changed. Receive performance messages appear due to the number of word message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1245 Message , [FW-1245], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 382
message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1248 Message , [FW-1248], < that the number of end-to-end (EE) word frames that the switch transmits has changed. Transmit performance messages appear due to the number of word - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 383
frames that the switch transmits has port has received small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 384
. The port has received a small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 385
sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies (IP) addresses that are authorized to establish Telnet connections to switches in the fabric. Recommended Action Run the errShow command to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 386
IP) addresses that are authorized to establish browser connections to the switches in the fabric. Recommended Action Run the errShow command to sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 387
sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies (IP) addresses that are authorized to establish API connections to switches in the fabric. Recommended Action Run the errShow command to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 388
(IP) addresses that are authorized to establish API connections to switches in the fabric. Recommended Action Run the errShow command to sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 389
Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING FW-1311 Message , [FW-1311], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 390
Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity INFO FW-1313 Message , [FW-1313], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 391
to security-class messages depend on user policies. Consult your security administrator for SES_POLICY contains a list of WWNs of device ports that are allowed to access the SES Server that a small computer system interface (SCSI) Enclosure Services (SES) request has been received from an - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 392
a small computer system interface (SCSI) Enclosure Services (SES) request has been received from an Responses to security-class messages depend on user policies. Consult your security administrator for SES_POLICY contains a list of WWNs of device ports that are allowed to access the SES Server - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 393
sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and name (WWN). The MS_POLICY contains a list of WWNs of device ports that are allowed to access the Management Server functionality. Recommended Action Run - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 394
. The SERIAL_POLICY contains a list of switch world wide names (WWNs) for which serial port access is enabled. Recommended Action Run the errShow command to determine the WWN of the device that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 395
within the acceptable range. Serial violations indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch world wide names (WWNs) for which serial port access is enabled. Recommended No action is required. Action Severity INFO FW-1328 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 396
FRONTPANEL_POLICY contains a list of switch world wide names (WWNs) for which front panel access is enabled. Recommended Action Run the errShow command to determine the Runoff the device that sent the request. Responses to security-class messages depend on user - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 397
The SCC_POLICY contains a list of switches by world wide names (WWNs) that are allowed to be members of a fabric. Recommended Action Run the errShow command to determine the WWN of the device that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 398
through the name server. Recommended Action Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity INFO FW-1337 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 399
42 FW-1339 Recommended Action Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING FW-1339 Message , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 400
the login attempt. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and FCS). When the primary FCS downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 401
an invalid timestamp has been received from the primary fabric configuration server (FCS). When the primary FCS downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the difference is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 402
with the public key of the primary FCS switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid signatures. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 403
with the public key of the primary FCS switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid signatures. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 404
the sender is the primary FCS switch and its certificate is signed by the Root CA recognized by the receiving switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 405
the low boundary. Authentication failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails is segmented. This counter keeps track of the number - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 406
switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port IDs. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 407
value is . Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has risen above the high boundary of time service (TS) out-of-sync violations has changed. Recommended Responses to security-class messages depend on user policies. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 408
is . Probable Cause Indicates that the number of time service (TS) out-of-sync violations has changed from a value outside of FCS switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 409
fabric, but it still has the WWN of the last primary FCS switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 410
only to another switch that is in secure mode and has a compatible security database. A compatible security database means that the version stamp and fabric configuration server (FCS) policy matches exactly. Recommended Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 411
command that can be executed only on a backup FCS switch. The counter increments every time someone issues one of these commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 412
command that can be executed only on a backup FCS switch. The counter increments every time someone issues one of these commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 413
slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 414
slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 415
Severity WARNING FW-1427 Message , [FW-1427], ,, WARNING, , Switch status change contributing factor Power supply: bad. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of faulty - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 416
42 FW-1430 Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the power supplies are not in the correct slots for redundancy. Recommended Rearrange the power supplies so that one is in an odd slot and other in an even slot to make them Action redundant. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 417
level of firmware to both CPs. Replace any faulty CPs. If you reset the micro-switch (the latch on the CP blade) on the active CP before the heartbeat was up on a power cycle, and the CPs came up non-redundant, then you should reboot the CPs again to clear the problem. Severity WARNING - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 418
, [FW-1436], ,, WARNING, , Switch status change contributing factor Marginal ports: marginal ports. (Ports ) Probable Cause Indicates that the switch status is not in a healthy state. This occurred - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 419
is not in a healthy state. This occurred because the switch is offline. Recommended Run the switchEnable command. Action Severity FRU) has changed to "inserted". This means that an FRU is inserted but not powered on. Recommended No action is required. Verify that the event was planned. Action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 420
for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to number of power supplies. So those values will not be automatically changed. The default values with no AP blades are: 3 out of service indicates switch status is DOWN, 0 indicates no - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 421
(2X) redundancy and proper monitoring by Fabric Watch, 4 active power supplies should be supplied and the default values associated with the to hardware problems. Recommended Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then enable the Action port using the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 422
loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Recommended No action is required. Respond to this - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 423
to the particular policy of the end-user installation. Frequent loss of signal generally indicates a physical problem. Check both ends of your cable Probable Cause Indicates that the number of signal losses that the port experiences has changed and dropped below upper threshold boundary to a - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 424
to software glitches. Persistent protocol errors occur due to hardware problems. Recommended No action is required. Respond to this message as the Action end-user installation. Severity INFO FW-1518 Message , [FW-1518], ,, INFO, , , , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 425
port experiences has changed and dropped below upper threshold boundary to a value within the acceptable range. Invalid words usually indicate a hardware problem end-user installation. Severity INFO FW-1521 Message , [FW-1521], ,, INFO, , , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 426
. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1525 Message , [FW-1525], ,, INFO, , , , has crossed lower threshold boundary to in between(High=, Low - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 427
the Action end-user installation. Severity INFO FW-1528 Message , [FW-1528], ,, INFO, , , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 428
indicate no frame activity at all. Both physical and hardware problems can cause link resets to increase. Recommended Respond to this message as of the end-user installation. Action Severity INFO FW-1531 Message , [FW-1531], ,, INFO, , , < - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 429
Respond to this message as it is appropriate to the particular policy of the end-user installation. Action Severity INFO FW-3011 Message , [FW-3011], ,, INFO, , , is below low boundary(High=, Low=). Current value - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 430
Respond to this message as it is appropriate to the particular policy of the end-user installation. Action Severity INFO FW-3015 Message , [FW-3015], ,, INFO, , , is below low boundary(High=, Low=). Current value - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 431
, [FW-3017], ,, INFO, , , is between high and low boundary(High=, Low=< of the end-user installation. Action Severity INFO FW-3019 Message , [FW-3019], ,, INFO, , , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 432
come online. Recommended No action is required. Action Severity INFO FW-3020 Message , [FW-3020], ,, WARNING, , , is above high boundary(High=, Low=). Current value is Probable Cause Indicates the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 433
it. If the problem persists, replace Action the standby CP. Run the supportSave command and contact your switch service provider. Severity CRITICAL the system has been rebooted either because of a user action or an error. The switch reboot can be initiated by the firmwareDownload, fastBoot, - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 434
43 HAM-1005 • Fastboot • Giveup Master:SYSM • CP Faulty:SYSM • FirmwareDownload • ConfigDownload:MS • ChangeWWN:EM • Reboot:WebTool • Fastboot:WebTool • Software Fault:Software Watchdog • Software Fault:Kernel Panic • Software Fault:ASSERT • Reboot:SNMP • Fastboot:SNMP • Reboot • Chassis Config • - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 435
auto-reboot is enabled, the system will automatically reboot itself. Otherwise you need to manually reboot it. Recommended For a reliable recovery, reboot the system manually if auto-reboot recovery is disabled. Run the Action supportSave command and contact your switch service provider. Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 436
43 HAM-1012 HAM-1012 Message , [HAM-1012], , SLOT cp-slot-number | CHASSIS, CRITICAL, ,Password database conversion failed. Probable Cause Indicates the password database conversion failed. Recommended No action is required. Action Severity CRITICAL - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 437
. Run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL HAMK-1002 Message , [HAMK-1002], , SLOT cp-slot-number | CHASSIS, INFO, , Heartbeat - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 438
44 HAMK-1004 HAMK-1004 Message ,[HAMK-1004], , SLOT cp-slot-number | CHASSIS, INFO, , Resetting standby CP (double reset may occur). Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. This message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 439
Replace the faulty blade or switch (for nonbladed switches). Action Severity ERROR HIL-1102 power supply status. Try to reseat the faulty fan field-replaceable unit (FRU) and power supply FRU to verify that they are seated properly. If the problem persists, replace the fan FRU or the power - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 440
, and 4024, the entire switch must be replaced because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100 , 4900, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other voltage - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 441
, and 4024, the entire switch must be replaced because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100, 4900, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other voltage - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 442
of your switch. Refer to the hardware reference manual for your switch for the switches and is not applicable to the Brocade 24000 or 48000. Recommended Action For the Brocade 3900 replace the fan FRU. For the Brocade 3016, 3250 and 3850, the entire switch must be replaced because these switches - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 443
problem can quickly cause the switch to overheat. This message is specific to nonbladed switches and is not applicable to the Brocade 24000 or 48000. Recommended For the Brocade operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 444
-replaceable unit (FRU) has failed or has been removed. This message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Replace the affected fan FRU immediately. Action Severity WARNING HIL-1302 Message , [HIL-1302], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 445
45 HIL-1305 Severity ERROR HIL-1305 Message , [HIL-1305], ,, ERROR, , One or two fans failed. Replace failed fan FRUs immediately. Probable Cause Indicates that multiple fan field-replaceable units (FRUs) have failed. This message is often preceded by a - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 446
have failed. This message is often preceded by a low fan speed message. Recommended Since the fans are not field replaceable, replace the switch if the temperature is high. Action Severity WARNING HIL-1311 Message , [HIL-1311], ,, INFO, , No fans are - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 447
45 HIL-1402 Probable Cause Indicates that one fan field-replaceable unit (FRU) has been removed. Recommended Install the missing fan FRU. Action Severity WARNING HIL-1402 Message , [HIL-1402], ,, WARNING, , Two fan FRUs missing. Install fan FRUs - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 448
sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the blade. Severity CRITICAL HIL-1503 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 449
. To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 450
. To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 451
not supplying power, fan speeds not available. Please ensure that the unit has power and the switch is on. Indicates that the power supply is not connected to a power source or it is not switched on or the unit is faulty. Applicable only to Brocade 5100. Fabric - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 452
45 HIL-1650 Recommended Ensure that the power cord is connected to the unit with a valid power source and then switch on Action the unit. If the problem persists, try reseating the unit. If the problem still persists replace the FRU. Severity WARNING HIL-1650 Message , [HIL-1650], < - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 453
HLO-1003], , FFDC, ERROR, , Invalid Hello received from port , Domain = , Remote Port =. Indicates that the HLO message received was invalid and the frame was dropped. The Brocade switch will not accept FSPF frames from the remote - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 454
an invalid HLO because either the domain or port number in the HLO message has an invalid value. This error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The HLO message of the remote switch must be compatible with the value specified in - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 455
Action Run the firmwareDownload command to reinstall the firmware to your switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 385 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 456
47 HMON-1001 386 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 457
DRAFT: BROCADE CONFIDENTIAL HSL System Messages Chapter 48 HSL-1000 Message , [HSL-1000], ,, CRITICAL, , HSL initialization failed. Probable Cause Indicates an HSL initialization failure. Recommended No action is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 458
48 HSL-1004 DRAFT: BROCADE CONFIDENTIAL Recommended No action is required. Action Severity INFO HSL-1004 Message , [HSL-1004], ,, ERROR, , Incompatible SFP for interface - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 459
DRAFT: BROCADE CONFIDENTIAL 48 HSL-1007 Recommended Install more memory on board. Action Severity CRITICAL HSL-1007 Message , [HSL-1007], ,, ERROR, , Failed to read - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 460
48 HSL-1007 DRAFT: BROCADE CONFIDENTIAL 390 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 461
HTTP-1001], ,, INFO, , Switch PIDformat has changed to . Probable Cause Guide. Severity INFO HTTP-1002 Message , [HTTP-1002], , AUDIT, INFO, , Zoning transaction initiated by User: , Role: - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 462
49 HTTP-1003 392 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 463
ERROR, , Slot , Port GE: Maximum attempts to restart failed. Disabling port. Probable Cause Indicates that the specified port has crashed unexpectedly and restarting attempts have failed. Recommended Power off and power on the blade using the slotPowerOff and - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 464
50 IBD-1001 394 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 465
name>, iSCSI login sessions exceed the maximum limit at slot port ge Probable Cause Indicates that the iSCSI login sessions exceed the supported limit per port. Recommended Use another port to log in. Action Severity WARNING Fabric OS Message Reference 395 53-1001338 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 466
51 IBPD-1003 396 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 467
ICPD-1004 Message Probable Cause , [ICPD-1004], ,, WARNING, , iSNS Client service is detected on multiple switches in fabric. Indicates the iSNS Client service is enabled on multiple switches in the fabric. Fabric OS Message Reference 397 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 468
ICPD-1006 Message , [ICPD-1006], ,, INFO, , iSCSI service is on the switch. Probable Cause Indicates the iSCSI service is enabled or disabled on the switch. Recommended No action is required. Action Severity INFO ICPD-1007 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 469
Recommended No action is required. Action Severity INFO 52 ICPD-1008 Fabric OS Message Reference 399 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 470
52 ICPD-1008 400 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 471
of address change> . Probable Cause Indicates that a change in the local IP address has occurred. If the source of the address change is manual, this means that the address change was initiated by a user. If the source of the address change is the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 472
53 IPAD-1001 402 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 473
new firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference Manual for switch service provider. Severity WARNING IPS-1004 Message , [IPS-1004], ,, WARNING, , Port Config Mode Mismatch slot () port(ge - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 474
WARNING IPS-1005 Message , [IPS-1005], ,, WARNING, , Tunnel Authorization Failure for slot () port(ge) tunnel ID() reason () Probable Cause Indicates that tunnel setup failed because of an authorization failure from the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 475
[ISCS-1000], ,, ERROR, , Slot Port GE crashed unexpectedly. Probable Cause Indicates the specified port has crashed. Recommended No action is required; the port will restart automatically. Action Severity ERROR Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 476
55 ISCS-1000 406 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 477
port /ge (current /ge). Probable Cause Indicates that the user storage name service (iSNS) server is zero. Hence peering is disabled. Recommended If you wish to enable the iSNS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 478
re-register with external iSNS server slot/port /ge. Probable Cause Indicates a user has requested a re-register with the specified external internet storage name service (iSNS) server. Recommended No action is required. Action Severity INFO - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 479
. Refer to the appropriate hardware reference manual for valid slot and Action port ranges. Severity WARNING ISNS-1011 Message , [ISNS-1011], ,, INFO, , iSNS Client Service is . Probable Cause Indicates the current - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 480
Start peering with external iSNS server on management port. Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS) on the management port. Recommended No action is required. Action Severity INFO 410 Fabric OS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 481
key vault. Recommended Determine whether the configured key vault is operational, and if it is not, change the switch key Action vault settings or resolve the operational problem at the vault. Severity ERROR KAC-1004 Message , [KAC-1004], ,, ERROR, , KAC - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 482
, and if it is not, change the switch key Action vault settings or resolve the operational problem at the vault. Severity ERROR KAC-1008 Message Recommended Synchronize the contents of the primary and secondary using instructions provided by the provider. Action Severity ERROR 412 Fabric - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 483
. An abort signal is sent. Recommended Copy the warning message along with any core file information, and contact your switch service Action provider. Severity WARNING KSWD-1002 Message , [KSWD-1002], , FFDC, WARNING, , Detected termination of - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 484
58 KSWD-1002 414 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 485
Message , [KTRC-1003], ,, ERROR, , Cannot open ATA dump device Probable Cause Indicates the ATA dump driver is not initialized properly. Recommended No action is required. Action Severity ERROR KTRC-1004 Message Probable Cause , [KTRC-1004 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 486
59 KTRC-1005 Recommended No action is required. Action Severity ERROR KTRC-1005 Message , [KTRC-1005], ,, ERROR, , Trace initialization failed. . . Probable Cause Indicates that a trace was unable to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 487
DRAFT: BROCADE CONFIDENTIAL L2SYS System Messages Chapter 60 L2SS-1001 Message , [L2SS-1001], < Message queue create failed. Probable Cause Indicates that the l2sys encountered with System Service Manager (SSM) message queue errors. Recommended Restart the l2sysd daemon. Action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 488
60 L2SS-1005 DRAFT: BROCADE CONFIDENTIAL Recommended Restart the l2sysd daemon. Action Severity ERROR L2SS-1005 Message , [L2SS-1005], ,, ERROR, , Mac-address-table hash failed - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 489
DRAFT: BROCADE CONFIDENTIAL LACP System Messages Chapter 61 LACP-1001 Message , [LACP-1001], has failed. Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference Manual for more information on this command. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 490
61 LACP-1001 DRAFT: BROCADE CONFIDENTIAL 420 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 491
1000 Message , [LANCE-1000], ,, ERROR, , Slot Port GE : Maximum attempts to restart failed. Disabling port. Probable Cause Indicates that the port is disabled. Recommended No action is required. Action Severity ERROR Fabric OS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 492
62 LANCE-1000 422 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 493
service is enabled. Probable Cause Indicates that the Logical Fabric Manager service is enabled. Note that the Logical Fabric Manager service is enabled by the factory setting and it is not user Manager configurations. This operation is not supported, currently. Recommended No action is required - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 494
. Check the reason for the port disable using the Action switchshow command. Rectify the disable based on the reason. Severity WARNING LFM-1006 Message , [LFM-1006], ,, WARNING, , The switch with domain with firmware version has joined - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 495
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING LOG-1002 Message , [LOG-1002], , FFDC, WARNING, , A log message was dropped - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 496
64 LOG-1003 LOG-1003 Message , [LOG-1003], ,, INFO, , The log has been cleared. Probable Cause Indicates the persistent error log has been cleared. Recommended No action is required. Action Severity INFO 426 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 497
ID, whose range is from 1 through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity ERROR LSDB- state record). The switch generates its local link state record when first enabled. By disabling and enabling the switch, a new - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 498
for domain Probable Cause Indicates there is no link state record for the specified local domain. Recommended No action is required. The other switch will pass the LSD once the fabric is stable. Action Severity WARNING 428 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 499
persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR MFIC-1002 Message , [MFIC-1002], ,, INFO, , Chassis FRU header not programmed for - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 500
66 MFIC-1003 Recommended Action IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is for information purposes only, and no action is required. IDID mode can - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 501
Chapter MPTH System Messages 67 MPTH-1001 Message , [MPTH-1001], , FFDC, ERROR, , Null parent, lsId = Probable Cause Indicates a null parent was reported. MPATH uses a tree structure in which the parent is used to connect to the root of the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 502
67 MPTH-1003 432 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 503
Chapter MQ System Messages 68 MQ-1004 Message , [MQ-1004], ,, ERROR, , mqRead, queue = , queue ID = , type = Probable Cause Indicates an unexpected message has been received in the specified message queue. The queue - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 504
68 MQ-1004 434 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 505
Cause Indicates the management server (MS) has segmented from another switch domain at the specified port number because of errors or inconsistencies defined in the MS platform service. Recommended Restart or power cycle the switch. Action Severity WARNING MS-1002 Message , [MS-1002 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 506
by> Run the firmwareDownload command to upgrade the firmware level on the switch to a level that supports RCS. RCS is supported in Fabric OS v2.6, v3.1 and greater transfers; then run the supportSave command and contact your switch service provider. Severity INFO MS-1004 Message , [MS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 507
. MS expects either a CT accept IU or a reject IU; the MS received neither response, which violates the Fibre Channel Generic Services (FS-GS) specification. Recommended Check the integrity of the FC switch at the specified domain. It is not sending correct MS Action information as defined by the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 508
system-name>, RLIR event. Switch Port ID is (). Device Port Tag is . . are likely the result of SAN hardware problems such as bad cables or the Action supportSave command and contact your switch service provider. Severity ERROR MS-1022 Message < - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 509
[MS-1025], ,, WARNING, , Possible Failover could have occurred while enabling MS Platform Service. Probable Cause Indicates that while the MS Platform Service was being enabled, a failover has occurred. This can leave the fabric in an inconsistent state. Recommended - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 510
69 MS-1025 440 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 511
initialize. Recommended Restart or power cycle the switch. Action Severity ERROR MSTP- switch, execute the haFailover command. If the problem persists or if this is a nonbladed switch, download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference Manual - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 512
70 MSTP-2002 DRAFT: BROCADE CONFIDENTIAL Recommended No action is required Action Severity INFO MSTP-2002 Message , [MSTP-2002], ,, INFO, , . My Bridge - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 513
Wait • 4 - Database Wait • 5 - Full If this error occurs repeatedly, then there is a problem in the protocol implementation between two switches. Recommended Action Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is FULL, then this message can - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 514
in state , input , port Probable Cause Indicates the database transmit set flag - Full Recommended No action is required. The Fabric OS automatically recovers from this problem. Action Severity WARNING 444 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 515
can handle. Recommended Action Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, or v3.2 or higher, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly. You can also reduce the number of devices - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 516
of the lowest version of firmware. Severity INFO NS-1005 Message , [NS-1005], ,, WARNING, , Zone size of has over the supporting limit of for the remote switch domain ID . Probable Cause - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 517
. Routing may not be setup correctly. Probable Cause Indicates that a logical ISL is detected in the TI zone. Recommended Remove the LISL port from the TI zone because the routing may not be set up correctly. Action Severity WARNING Fabric OS Message Reference 447 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 518
72 NS-1007 448 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 519
DRAFT: BROCADE CONFIDENTIAL NSM System Messages Chapter 73 NSM-1001 Message , [NSM-1001], Cause , [NSM-1004], ,, INFO, , Creating a Port-Channel interface . Indicates that the new Portchannel interface has been created. Fabric - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 520
BROCADE CONFIDENTIAL Recommended No action is required. Action Severity INFO NSM-1005 Message , [NSM-1005], ,, INFO, ,The FCoE VLAN: is in use. First remove all the FCoE sessions of its member ports is disabled or enabled. Recommended No - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 521
DRAFT: BROCADE CONFIDENTIAL 73 NSM-1008 Recommended No action is required. Action Severity INFO Fabric OS Message Reference 451 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 522
73 NSM-1008 DRAFT: BROCADE CONFIDENTIAL 452 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 523
DRAFT: BROCADE CONFIDENTIAL ONM System Messages Chapter 74 ONMD-1001 Message , [ONMD-1001 sequence-number>,, INFO, , The feature is enabled: . Probable Cause Indicates a specific feature is enabled. Recommended No action is required. Action Severity INFO ONMD- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 524
74 ONMD-1003 DRAFT: BROCADE CONFIDENTIAL 454 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 525
Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1002 Message , [PDM - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 526
ran out of memory. Recommended Action Reboot or power cycle the switch. If the message persists, run the supportFtp command firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 527
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1009 Message , [PDM-1009], ,, WARNING, , Can't update Port Config Data. Probable Cause Indicates the parity data manager (PDM) system - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 528
Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1012 Message , [PDM - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 529
firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service ,, WARNING, , Failed to download area port map. Fabric OS Message Reference 459 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 530
service provider. Severity WARNING PDM-1022 Message , [PDM-1022], ,, WARNING, , The switch is configured only with IPv6. Probable Cause Indicates that the parity data manager (PDM) cannot synchronize with its peer because the firmware does not support - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 531
Chapter PDTR System Messages 76 PDTR-1001 Message , [PDTR-1001], ,, INFO, , . Probable Cause Indicates information has been written to the panic dump files. The watchdog register codes are as follows: • 0x10000000 bit set means - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 532
76 PDTR-1002 462 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 533
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PLAT-1001 Message , [PLAT-1001], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 534
timestamp>, [PLAT-1003], , FFDC, CRITICAL, , Slot C/BE: ADBUS: misc_intr . Probable Cause Indicates a PCI bus hang was detected. Recommended The FRU - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 535
Severity WARNING PMGR-1003 Message , [PMGR-1003], , INFO, , Attempt to delete switch succeeded. Probable Cause Indicates that the switch with the specified FID was successfully deleted. Recommended No action is required. Action Severity INFO PMGR - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 536
No action is required. Action Severity INFO PMGR-1006 Message , [PMGR-1006], , WARNING, , Attempt to move port(s) on slot to switch failed. Error message: . Probable Cause Indicates the unsuccessful attempt to move the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 537
Cause Indicates the failed attempt to change the base switch. Recommended No action is required. Action Severity WARNING PMGR-1011 Message , [PMGR-1011], , INFO, , Attempt to move ports to switch succeeded. Probable Cause Indicates the successful - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 538
78 PMGR-1011 468 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 539
This will free some buffers and allow this port to be enabled. Severity INFO PORT-1005 Message Probable Cause , [PORT-1005], ,, WARNING, , Slot port does not support configured L_port. Issue portCfgLport to clear configuration - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 540
Recommended No action is required. Action Severity INFO PORT-1008 Message , [PORT-1008], ,, INFO, , GigE Port (ID: ) has been enabled. Probable Cause Indicates a GbE port has been enabled. Recommended No action is required. Action Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 541
Recommended No action is required. Action Severity INFO PORT-1010 Message , [PORT-1010], ,, WARNING, , Port (ID: ) QOS is disabled. Probable Cause The Port QOS is disabled because the port currently has Best Effort Setting that requires QOS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 542
79 PORT-1010 472 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 543
Messages 80 PS-1000 happen, restart Action or power cycle the switch to re-initiate the firmware. Severity CRITICAL PS-1001 is required. Refer to the Fabric OS Administrator's Guide for more information on the PID Action format. Severity ports. Fabric OS Message Reference 473 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 544
80 PS-1004 Probable Cause Indicates that the restoring configuration has failed to set the end-to-end monitoring mask on at least one ISL port. Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is Action enabled. ISL monitoring can only be - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 545
INFO PSWP-1002 Message , [PSWP-1002], ,, INFO, , Port Swap feature enabled. Probable Cause Indicates that the portSwap feature has been enabled in the switch. Recommended No action is required. Action Severity INFO PSWP-1003 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 546
to display a list of currently swapped ports. Then use the Action portSwap command to switch number . Probable Cause Indicates that the bladeSwap command has failed to access the switch context. Recommended Retry the command. If the failure persists, contact your support - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 547
81 PSWP-1007 Fabric OS Message Reference 477 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 548
81 PSWP-1007 478 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 549
Run the supportFtp command (as needed) to set up automatic FTP transfers and run the Action supportSave command then contact your switch service provider. Severity INFO RAS-1002 Message , [RAS-1002], ,, WARNING, , First failure data capture (FFDC) maximum - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 550
switch service provider. Action Severity WARNING RAS-1006 Message , [RAS-1006], , INFO, , Support Remote target designated by user> '. Probable Cause Indicates that the support data file is transferred from the switch automatically. Recommended No action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 551
INFO RAS-3002 Message , [RAS-3002], , INFO, , USB storage device enabled. Probable Cause Indicates that the USB storage device is enabled. Recommended No action is required. Action Severity INFO RAS-3003 Message , [RAS-3003], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 552
82 RAS-3004 Recommended No action is required. Action Severity INFO 482 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 553
firmware for any switches that do not support RCS. Severity INFO RCS-1002 Message , [RCS-1002], ,, INFO, , RCS has been enabled the memory usage on the switch using the memShow command. Restart or power cycle the switch. Severity ERROR Fabric OS Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 554
in Fabric OS v2.6, v3.1 and later, and v4.1 and later. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS-1005], ,, INFO, , Phase , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 555
1007 Message , [RCS-1007], ,, ERROR, , Zone DB size and propogation overhead exceeds domain 's maximum supported Zone DB size . Retry after reducing the Zone DB size. Probable Cause Indicates that a domain cannot handle the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 556
83 RCS-1008 486 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 557
Chapter RKD System Messages 84 RKD-1001 Message , [RKD-1001], ,, INFO, , operation .\nTarget: , Initiator: - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 558
84 RKD-1004 RKD-1004 Message , [RKD-1004], ,, INFO, , Message: encountered a FATAL SCSI error and will be suspended.\n.\nCommand: \nLBA: \nNum Blocks: - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 559
DRAFT: BROCADE CONFIDENTIAL RMOND System Messages Chapter 85 RMON-1001 Message , [RMON-1001], ,, INFO, , RMON rising threshold alarm from SNMP OID . - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 560
85 RMON-1002 DRAFT: BROCADE CONFIDENTIAL 490 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 561
client IP address has faulty credentials. Recommended Enter the correct user name and password from the Fabric Access API host. Action SSL certificate is missing. Recommended To enable RPCD in secure mode, install a valid SSL certificate on the switch. Action Severity WARNING RPCD-1003 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 562
Secure RPCd is disabled. Probable Cause Indicates the SSL certificate file has been corrupted. Recommended To enable RPCD in Secure mode, install a valid SSL certificate in the switch. Action Severity WARNING RPCD-1005 Message , [RPCD-1005], ,, WARNING, - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 563
see if the specified domain ID is online. Enable the switch with the specified domain ID. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers and run the supportSave command then contact your switch service provider. Severity WARNING Fabric OS Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 564
ID is reachable. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers and run the supportSave command then contact your switch service provider. Severity INFO 494 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 565
88 SAS-1001 Message , [SAS-1001], ,, ERROR, , string description of command which failed> of GE failed. Please retry the command. Data inst= st= rsn= fn= oid - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 566
88 SAS-1001 496 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 567
daemon name are listed below. For a complete listing, see the Introduction to this manual. • fabricd • asd • evmd • fcpd • webd • msd • nsd switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 568
89 SCN-1001 498 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 569
in the fabric to be enabled. If all switches are capable, RCS is automatically enabled. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1002 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 570
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING SEC-1005 Message , [SEC-1005], ,, INFO, , Primary FCS receives data request from domain Probable Cause Indicates the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 571
was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the HTTP connection. Action Severity INFO SEC-1009 Message , [SEC-1009], ,, INFO, , Security violation - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 572
for re-creating PKI objects, outlined in the Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the certificate when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, then local validation - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 573
occurred during the distribution of the security database. This can occur only when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, then local validation finds the error in the security database. This is a rare occurrence - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 574
sync. Probable Cause Indicates the security database size is not supported by the standby control processor (CP). Recommended Reduce the occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 575
command. Only the secPolicyCreate command supports use of the asterisk for adding switches to policies. Recommended Action Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the switch connection control (SCC) policy. Refer - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 576
Severity ERROR SEC-1041 Message , [SEC-1041], ,, ERROR, , Invalid port member in portlist (). . Probable Cause Indicates the port member is invalid for one of the following reasons: • The value is not a number. • The - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 577
number>,, ERROR, , Invalid index/area member in portlist (). Out of range ( - - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 578
a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 579
list . Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 580
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 581
occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that either no domains or domains more than the maximum number supported are specified. Recommended Enter the correct number of domains. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 582
reasons. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1071 Message , [SEC-1071], ,, ERROR, , No new security policy data to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 583
up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1073 Message , [SEC-1073], ,, ERROR, , No FCS policy in list! Probable Cause Indicates the specific policy type is empty. The - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 584
when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds able to communicate with others nodes in the zone. Recommended Re-enable the current zone configuration for the change to take effect. Action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 585
a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 586
a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 587
a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 588
a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 589
a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 590
switch service provider. Severity ERROR SEC-1099 Message , [SEC-1099], ,, ERROR, , Please enable your switch when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 591
server (FCS) is distributing the security database to the other switches in enable security on all switches. Please retry later. Probable Cause Indicates the security enable failed on the fabric because one or more switches all switches in the fabric are in the ready state. When all switches are - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 592
re-creating PKI objects outlined in the Secure Fabric OS Administrator's Guide. Severity ERROR SEC-1107 Message , [SEC-1107], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 593
Message Probable Cause , [SEC-1112], ,, ERROR, , FCS list must be the first entry in the Active Security policies, and the same as the current active FCS list in the switch. Indicates that either a security policy download is attempted with an active policy - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 594
90 SEC-1113 Recommended Make sure that the new FCS policy is the same as the current FCS policy on the switch. Action Severity ERROR SEC-1113 Message , [SEC-1113], ,, WARNING, , [ license ] going to expire in days. Probable - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 595
save the data received by the primary fabric configuration server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Recommended Run the secFabricShow command to verify that all switches in the fabric are in the ready state. Action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 596
. Recommended Action Verify the security event was planned. If the security event was planned, verify that all switches in the fabric are in time synchronization with the primary FCS and that no external entity is trying to access the fabric. When verification is complete, retry the operation - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 597
. Severity INFO SEC-1130 Message , [SEC-1130], ,, INFO, , The Primary FCS has failed over to a new switch. Probable Cause Indicates an FCS failover operation was completed successfully. Recommended Action Verify the security event was planned. If the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 598
sent from the primary fabric configurations server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 599
sent from the primary fabric configuration server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 600
on the fabric. RCS must be capable on all switches in the fabric to be enabled. If all switches are capable, it is automatically enabled. For any switch that does not support RCS, obtain the latest firmware version from your switch supplier, and run the firmwareDownload command to upgrade the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 601
command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO SEC-1158 Message , [SEC-1158], ,, INFO, , Invalid name - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 602
, , Lockdown option cannot be applied on a non-FCS switch. Probable Cause Indicates the attempt to enable security is made on a switch that is not present in the fabric configuration server (FCS) list. Recommended Add the switch to the FCS policy list when using the lockdown option to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 603
number>,, ERROR, , Low memory, failed to enable security on all switches. Probable Cause Indicates the system is low on memory. occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 604
1170 Message , [SEC-1170], ,, INFO, , This command must be executed on the Primary FCS switch, the first reachable switch in the FCS list. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 605
-1174 Message , [SEC-1174], ,, ERROR, , Failed to set password. Probable Cause Indicates the FCS or non-FCS password could not be set. Recommended Verify all switches in the fabric are in time synchronization with the primary and that no - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 606
Verify all switches in the 1180], ,, INFO, , Added account with authorization. Probable Cause Indicates the ERROR, , Policy to binary conversion error: Port is out range. Indicates a security database conversion has - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 607
>,, INFO, , switch DB. Probable Cause Indicates the switch database was enabled or disabled as the secondary authentication, accounting, and authorization (AAA) mechanism when the Remote Authentication Dial-in User Service (RADIUS) / Lightweight Directory Access Protocol - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 608
,, INFO, , Security violation: Unauthorized device tries to FLOGI to index/area of switch . Probable Cause Indicates a device connection control (DCC) security violation was reported. The specified device attempted to login - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 609
90 SEC-1190 SEC-1190 Message , [SEC-1190], ,, INFO, , Security violation: Unauthorized host with IP address tries to do SNMP read operation. Probable Cause Indicates an SNMP security violation was reported. The specified unauthorized host - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 610
configuration server (FCS) is distributing the security database to the other switches in the switch accounts admin and user do not exist on the switch when enabling security. Recommended Reset the default admin and user account names on the switch that reported the warning and retry Action enabling - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 611
-number>,, INFO, , Changed account . Probable Cause Indicates the specified account has Security violation: Unauthorized access to serial port of switch . Probable Cause Indicates a serial primary FCS switch. Fabric OS Message Reference 541 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 612
server (FCS) switch. Recommended Action Check the MS policy and verify that the connection is allowed. If the connection is allowed but not specified, enable the from MS device node name , device port name . Probable Cause Indicates a management server (MS) - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 613
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Fabric OS Message Reference 543 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 614
occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that the firmware to the latest version for your specific Action switch. Verify the firmware you are installing supports the Brocade Secure - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 615
occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds in the Secure Fabric OS Administrator's Guide. If PKI objects are valid, verify that an unauthorized switch is not trying to access the fabric - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 616
/LDAP server identity>. Probable Cause Indicates that after some servers timed out, the specified remote authentication dial-in user service (RADIUS/LDAP) server responded to a switch request. Recommended If the message appears frequently, move the responding server to the top of the RADIUS/LDAP - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 617
because one or more of the password policies is not set to default value. Probable Cause Indicates the security enable failed on the fabric because one or more switches in the fabric have password policies that are not set to the default value. Recommended Action Verify the security event was - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 618
to the EM module to retrieve the IP address failed. Recommended Restart the system to fix this error. If the problem persists contact your switch service provider. Action Severity ERROR SEC-1315 Message , [SEC-1315], ,, ERROR, , command - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 619
a fabric with strict fabric wide policy Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with a secure mode enable command. Reason: . Probable Cause Indicates the security enable failed on the fabric because the switch has a - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 620
support a device connection control (DCC) policy with more than 256 ports. Recommended Reconfigure any policy that includes more than 256 ports Probable Cause Indicates the reliable commit service (RCS) transaction failed with the enforcement: Switch connecting to port - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 621
switch with the fabric. Severity ERROR SEC-1326 Message , [SEC-1326], ,, INFO, , Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 622
command Action and contact your switch service provider. Severity ERROR SEC FCS switch. Use the secPolicyShow command to Action verify and correct the configuration if necessary. Severity ERROR SEC-1331 Message , [SEC-1331], ,, ERROR, , Attempt to enable - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 623
fabric, Action or set the fabric-wide mode for FCS as Strict. Severity ERROR SEC-1333 Message , [SEC-1333], ,, INFO, , command failed. There are VF enabled switches in fabric. db(s) distribution - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 624
90 SEC-3036 SEC-3036 Message , [SEC-3036], , AUDIT, INFO, , Event: ipfilter, Status: failed, Info: Failed to save changes for ipfilter policies. Probable Cause Indicates that that the specified IP filter policy has not been saved. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 625
90 SEC-3050 Recommended Check for unauthorized access to the switch through the specified protocol connection. Action Severity INFO SEC-3050 Message , [SEC-3050], , AUDIT, INFO, , Event: , Status: success, - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 626
90 SEC-3051 556 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 627
Cause Indicates the initialization of the simple network management protocol (SNMP) service has failed and you will not be able to query the switch through SNMP. Recommended Restart or power cycle the switch. This will automatically initialize SNMP. Action Severity ERROR SNMP-1003 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 628
name>, Incorrect SNMP configuration. Probable Cause Indicates the simple network management protocol (SNMP) configuration is incorrect and the SNMP service will not work correctly. Recommended Change the SNMP configuration back to the default. Action Severity ERROR SNMP-1005 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 629
91 SNMP-1008 Severity INFO SNMP-1008 Message , [SNMP-1008], ,, INFO, , The last device change happened at: . Probable Cause Indicates the last device change time. Recommended Execute the nsshow command to view the current device status. Action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 630
91 SNMP-1008 560 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 631
number containing Encryption Engine>, Cryptographic operation enabled. Probable Cause Indicates the cryptographic operation is enabled on an encryption engine. Recommended -bladed system, perform a fastboot command on the switch to recover the system. Severity ERROR Fabric OS Message Reference 561 53 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 632
the Crypto subsystem cover is tampered. Recommended EE is zeroized. User needs to run initEE and regEE. Action Severity CRITICAL SPC-2003 name>, , : FPGA firmware download failed: 0x%x. Probable Cause Indicates the FPGA download has - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 633
SPC-2005 Message , [SPC-2005], ,, INFO, , , : FPGA firmware download success: 0x%x. Probable Cause Indicates the FPGA download was successful. Recommended No action is required. Action Severity INFO - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 634
,, CRITICAL, , , : Tamper event: User zeroization. Probable Cause Indicates the Tamper event triggered due to a user zeroize request. Recommended EE is zeroized. Run the initEE and regEE commands. Action Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 635
92 SPC-3001 SPC-3001 Message , [SPC-3001], ,, ERROR, , , : No input KEK for DEK inject, DEK: , KEK: - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 636
format • 32 - DEK could not be unwrapped • 33 - FGPA error upon inject • 73 - Invalid KEK format Recommended Contact technical support. Action Severity ERROR SPC-3006 Message , [SPC-3006], ,, ERROR, , , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 637
status code 14, complete primary KEK generation; otherwise, contact technical support. Action Severity ERROR SPC-3008 Message , [SPC-3008 certificate mismatch, certificate: . Probable Cause Indicates the FIPS certificate within the Crypto Module - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 638
92 SPC-3010 SPC-3010 Message , [SPC-3010], ,, WARNING, , , : SEK integrity failure during initialization. Probable Cause Indicates the Crypto Module internal Secret Encryption Key has been corrupted - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 639
: successive values match. Probable Cause Indicates the Crypto Module internal random number generator has failed. Recommended Contact technical support. Action Severity ERROR SPC-3015 Message , [SPC-3015], ,, ERROR, , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 640
92 SPC-3015 570 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 641
Check the system resources and restart the switch. Action Severity ERROR SPM-1002 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 642
93 SPM-1005 Recommended No action is required. Action Severity INFO SPM-1005 Message , [SPM-1005], ,, INFO, , Set EE Control slot action . Probable Cause Indicates encryption engine (EE) control slot configuration. Recommended No action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 643
93 SPM-1009 Recommended No action is required. Action Severity INFO SPM-1009 Message , [SPM-1009], ,, ERROR, , Certificate is missing. Probable Cause Indicates that a certificate is missing. Recommended Run the cryptocfg --initnode command. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 644
. Action Severity INFO SPM-3004 Message Probable Cause , [SPM-3004], ,, INFO, ,Event: cryptocfg Status: success, Info: EE in slot enabled. Indicates an encryption engine was enabled. 574 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 645
93 SPM-3005 Recommended No action is required. Action Severity INFO SPM-3005 Message , [SPM-3005], ,, INFO, ,Event: cryptocfg Status: success, Info: EE in slot disabled. Probable Cause Indicates an encryption engine was disabled. Recommended No - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 646
93 SPM-3009 Recommended No action is required. Action Severity INFO SPM-3009 Message , [SPM-3009], ,, INFO, ,Event: cryptocfg Status: success, Info: DH response accepted. Probable Cause Indicates a DH challenge was accepted. Recommended No action is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 647
93 SPM-3013 Recommended No action is required. Action Severity INFO SPM-3013 Message , [SPM-3013], ,, INFO, ,Event: cryptocfg Status: success, Info: Key vault with certificate label \"\" deregistered. Probable Cause Indicates a key vault was - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 648
93 SPM-3017 Recommended No action is required. Action Severity INFO SPM-3017 Message , [SPM-3017], ,, INFO, ,Event: cryptocfg Status: success, Info: Master key exported. Probable Cause Indicates a master key was exported. Recommended No action is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 649
, ,Event: cryptocfg Status: success, Info: System card . Probable Cause Indicates use of the system card was enabled or disabled. Recommended No action is required. Action Severity INFO SPM-3024 Message Probable Cause , [SPM-3024], - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 650
93 SPM-3025 Recommended No action is required. Action Severity INFO SPM-3025 Message , [SPM-3025], ,, INFO, ,Event: cryptocfg Status: success, Info: File imported via usb: Source: Destination: . Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 651
ip>. Probable Cause Indicates the supportSave command was used to transfer support information to a remote location. Recommended No action is required. command to set the FTP or SCP parameters. Action After the problem is corrected, rerun the supportSave command. Severity WARNING SS-1002 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 652
possible errors in subcommands being executed by the supportSave command. Recommended Run the usbstorage command to check the USB storage device settings. After the USB problem is Action corrected, rerun the supportSave command. Severity WARNING 582 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 653
or power cycle the switch. Severity ERROR SSMD-1002 Message , [SSMD-1002], ,, ERROR, ,Failed to initialize rc = . Probable Cause Indicates that an initialization of a module within the SSM has failed. Recommended Download a new firmware - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 654
during basic startup and initialization. Recommended Action Restart or power cycle the switch .If the condition persists then download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference Manual for more information on this command. Severity ERROR - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 655
number> / . Probable Cause Indicates the DCE System Services Manager (SSM) encountered an unexpected error in initializing the dataplane ASIC QoS infrastructure. Recommended Restart or power cycle the switch. Action Severity WARNING SSMD-1205 Message , [SSMD-1205 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 656
Cause Indicates the DCE System Services Manager (SSM) encountered an unexpected error in programming the dataplane ASIC for enforcing the interface Trust feature. Recommended Delete and reapply the QoS interface Trust policy. Restart or power cycle the switch. Action Severity WARNING SSMD-1209 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 657
the DCE System Services Manager (SSM) encountered an unexpected error in programming the dataplane ASIC for enforcing the CoS to Traffic Class mapping feature. Recommended Delete and reapply the QoS interface CoS to Traffic Class policy. Restart or power cycle the switch. Action Severity WARNING - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 658
Probable Cause Indicates the DCE System Services Manager (SSM) encountered an unexpected error in programming the dataplane ASIC for enforcing the interface Pause feature. Recommended Delete and reapply the QoS Pause policy. Restart or power cycle the switch. Action Severity WARNING 588 Fabric - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 659
DRAFT: BROCADE CONFIDENTIAL 95 SSMD-1217 SSMD-1217 Message , [SSMD-1217], ,, WARNING, ,QoS CEE could not comply with FCoE scheduler policy for CEE Map . Probable Cause Indicates the DCE System Services Manager (SSM) was unable to translate - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 660
95 SSMD-1217 DRAFT: BROCADE CONFIDENTIAL 590 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 661
30 minutes. Recommended Action Do not fail over or power down the system during firmware upgrade. Allow the firmwareDownload command to continue without Indicates the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 662
>, [SULB-1007], ,, INFO, , Standby CP reboots. Probable Cause Indicates the standby CP is rebooting with new firmware. Recommended Action No action is required. The firmwareDownload command is progressing as expected. Run the firmwareDownloadStatus command for more - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 663
failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 664
secondary partition. Please use firmwareDownloadStatus and firmwareShow to see firmware status." "firmwareDownload has started on Standby CP. up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 665
0x7f "Standby CP reboots." 0x80 "Standby CP failed to reboot." 0x81 "Standby CP booted up with new firmware." 0x82 "Standby CP failed to boot up with new firmware." 0x83 "There was an unexpected reboot during firmwareDownload. The command is aborted." 0x84 "Standby CP was not responding - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 666
required package list file. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package." 0x15 "Unable to create firmware version file - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 667
firmware, or contact your service power off these blades before 0x30 " "Cannot downgrade due to presence of long-distance ports firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware command. If the problem persists, contact your system - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 668
type in the chassis. Remove or power off the unsupported blades before proceeding. firmware packages on the file server, then retry firmwareDownload. If the problem switch, when firmwareDownload fails, the command will synchronize the firmware on the two partitions of each CP by starting a firmware - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 669
download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO SULB-1010 failure is caused by an inconsistent filesystem, contact your switch service provider. Action Severity INFO SULB-1011 Message , - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 670
and re-insert the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1020 Message , [SULB-1020], AUDIT, ERROR, , New firmware failed to boot in slot . Probable Cause Indicates the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 671
by an unexpected disruption of the firmwareDownload command, for example, by powering off and on of the indicated BP blade in the middle of problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message , [SULB-1024], AUDIT, WARNING, , Firmware - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 672
progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message Probable Cause , [SULB-1031], , AUDIT, WARNING, , The switch is relocating an internal firmware image. Indicates the switch has rebooted with the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 673
switch. Recommended Run the firmwareShow command to verify the firmware versions. Run the switchShow command to Action make sure the switch is enabled command to monitor the progress. If the problem persists, contact your switch service provider. Severity ERROR SULB-1035 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 674
relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1036 Message , [SULB-1036], ,, INFO, , . Probable Cause Indicates the firmware version is running in the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 675
as inconsistent during failover or recovery. Recommended Action On a Brocade 24000 or 48000 switch, run the slotPowerOff command and then the slotPowerOn command. On a Brocade 7500 or AP7600 switch, reboot or power cycle the switch. Severity ERROR Fabric OS Message Reference 605 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 676
fabric. Recommended Load a firmware version on standby that supports NPIV functionality, using the firmwareDownload Action command. Severity WARNING SWCH-1007 Message Probable Cause , [SWCH-1007], ,, WARNING, , Switch port disabled due to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 677
blade is enabled with the port configuration that does not support port swap. Recommended Action Replace the blade with ports that support port swap. Then swap the ports back to the ports default area. Refer to the Fabric OS Administrator's Guide for more information on port swapping. Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 678
Probable Cause Indicates the standby control processor (CP) does not support Trunk Area functionality, but the switch has some ports with Trunk Area enabled. Recommended Load a firmware version on standby that supports Trunk Area functionality, using the Action firmwareDownload command. Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 679
problem or due to file corruption. Recommended Action Restart or power cycle the switch If the message persists, run the firmwareDownload command to update the firmware on it, This is not a supported configuration. Remove the WWN-PID binding and re-enable the port and then run the wwnaddress -- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 680
be assigned because it is user bound to a different port. Remove the WWN-PID binding or remove portAddress binding and re-enable the port and then run the processor (CP) does not support links to AG running QOS. Recommended Load a firmware version on the standby CP that supports QOS links to AG, - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 681
services or to fail over to active status. Recommended Action The switch is in an inconsistent state and can be corrected only by a restart or power cycle. Before restarting the chassis, record the firmware version on the switch chassis option storage device> is not supported by CP Blade with ID < - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 682
WWN) card). This message occurs only on the Brocade 24000 and 48000. Recommended Action As indicated in firmware. Note that the chassisConfig option 1 should be valid for all platforms running any valid firmware Use the supportSave command to gather troubleshooting data. Issue a reboot or haFailover - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 683
Action Run the memShow command to view the switch memory usage. Restart or power cycle the switch. Run the supportFtp command to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL SYSM-1002 Message , [SYSM - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 684
99 SYSM-1004 SYSM-1004 Message , [SYSM-1004], ,, ERROR, , Failed to retrieve current chassis configuration option, ret= Probable Cause Indicates there was a failure to read configuration data from the WWN card. Recommended Verify that the world - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 685
TAPE System Messages Chapter 100 TAPE-1001 Message , [TAPE-1001], , FFDC, INFO, , Key acquisition for . Probable Cause Indicates that the key acquisition for the pool or the container has begun or is complete. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 686
10 TAPE-1001 616 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 687
MANUAL, TRIGGER)>) Probable Cause Indicates that trace dump files have been generated on the switch contact your switch service provider. Severity user> '. Probable Cause Indicates that a trace dump has occurred on the switch or the indicated slot and it is successfully transferred from the switch - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 688
transfers; then run Action the supportSave command and contact your switch service provider. Severity ERROR TRCE-1004 Message , [TRCE- target configured by users.> '. Probable Cause Indicates that a connectivity test to the FTP host has succeeded. This feature is enabled by the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 689
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1008 Message , [TRCE- trace information to active CP. This message is only applicable to the Brocade 24000 and 48000. Recommended Action Run the haShow command to verify that - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 690
switch service provider. Severity ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually blade is enabled and retry the command. If the blade is already enabled, run the Action supportSave command and contact your switch service provider. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 691
or password is incorrect. Recommended Action This message indicates a typing error by the user. If this message occurs repeatedly, it might indicate an unauthorized user trying to gain access to a switch. When Secure mode is enabled on the fabric, the IP address of a failed login is reported to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 692
the track change feature recorded a configuration change for the switch. The track change feature records any change to the configuration -changes on. Probable Cause Indicates the track change feature has been enabled. Recommended No action is required. Run the trackChangesSet 0 command to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 693
the clock server IP configured correctly. Verify this clock server is accessible to the switch and functional. If the principal or primary FCS does not support the feature, either choose a different switch for the role or reset the clock server to LOCL. Severity INFO Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 694
message might be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits. • Synchronizing . For example, during fabric reconfiguration or role change of the primary FCS switch. If the message does not recur, it should be ignored. Recommended - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 695
10 TS-1008 Fabric OS Message Reference 625 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 696
10 TS-1008 626 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 697
-1007 Message , [UCST-1007], , FFDC, CRITICAL, , Inconsistent route detected: Port = , should be Probable Cause Indicates the switch detected an inconsistency in the routing database between the routing protocol and the hardware - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 698
>, [UCST-1025], ,, INFO, , In-order delivery option has been enabled with Lossless-DLS option. Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery of frames during topology changes. Recommended No action is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 699
because the enabled TI zone is not compatible with the fabric configuration. Probable Cause Indicates the specified switch is unreachable because of the TI zone and the fabric configuration incompatibility. Recommended Clear all TI zones and refer to the TI zone user manual for instructions on how - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 700
10 UPTH-1002 630 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 701
WEBD System Messages Chapter 106 WEBD-1001 Message , [WEBD-1001], ,, WARNING, , Missing or Invalid Certificate file -- HTTPS is configured but could not be started. Probable Cause Indicates the SSL certificate file is either invalid or absent. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 702
of IP Address. Probable Cause Indicates the IP address of the switch changed and the HTTP server is restarted. Recommended No action is required the built-in recovery process has failed to restore HTTP services. The problem often results from invalid configuration of SSL certificates, but there - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 703
failure associated with this event, contact your customer support for Action assistance. Severity ERROR XTUN-1003 Message , [XTUN-1003], ,, ERROR, , Message Transmission failed:I/T/L: - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 704
Initiator ID> . Probable Cause Indicates that the FCP exchange has been aborted by the Initiator. Recommended If there was an unexpected job failure associated with this event, contact your customer support for Action assistance. Severity ERROR XTUN-1998 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 705
, [XTUN-2004], ,, INFO, , FCIP Tunnel Pri QoS UP. Indicates that the specified quality of service for this tunnel is up. This applies to the data classes only. When the f-class comes online, the tunnel itself is marked as up - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 706
-number>,, INFO, , FCIP Tunnel Pri QoS DOWN . Probable Cause Indicates that the specified quality of service has gone down. This applies to the data classes only. If the f-class goes down, the tunnel itself is marked as down. Recommended If the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 707
DRAFT: BROCADE CONFIDENTIAL ZEUS System Messages Chapter 108 ZEUS-1001 Message , [ZEUS-1001], ,, ERROR, , Port port fault. Please change the SFP or check cable. Probable Cause Indicates a deteriorated small form-factor pluggable (SFP), an - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 708
10 ZEUS-1001 DRAFT: BROCADE CONFIDENTIAL 638 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 709
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command to save these core files and contact your switch service provider. Severity ERROR Fabric OS Message Reference 639 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 710
10 ZOLB-1001 640 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 711
port zone member that is targeted for the local switch contains a non-existent port. The effective zoning configuration (displayed in the error message) contains a port in another, this will cause the port to go to session-based hard zoning. In session-based zoning, the zone enforcement is checked - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 712
port. Severity WARNING ZONE-1013 Message , [ZONE-1013], ,, WARNING, , Quick Loop not supported. Probable Cause Indicates the QuickLoop feature is not supported in the current code release. If the QuickLoop zoning configuration is enabled on the switch - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 713
based hard zoning (value = 3) • FA zone (value = 5) QuickLoop zones are not supported in Fabric OS v4.x and above. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 714
operation. This usually occurs if the switch on the other side of the port is busy. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity INFO ZONE-1024 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 715
an unknown reason. • User Command: A user aborted the current zoning transaction. • Switch Shutting Down: The switch is currently shutting down. Recommended switches in your fabric. Refer to the Fabric OS Administrator's Guide for information on the zone database sizes supported for each switch. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 716
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING ZONE-1030 Message , [ZONE-1030 , , Switch is in interop mode. (switch, port) members not supported. Probable Cause Indicates the switch is set to interop - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 717
Indicates the Fabric OS cannot examine the zone configuration file. Typically the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity ERROR Fabric OS Message Reference 647 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 718
the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation WARNING, , Unstable link detected during merge at port (). Probable Cause Indicates a possible unstable link or faulty - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 719
11 ZONE-1042 ZONE-1042 Message , [ZONE-1042], ,, INFO, , The effective configuration has been disabled. . Probable Cause Indicates the effective zone configuration has been disabled. Recommended Verify that this zone configuration change was done - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 720
, [ZONE-1047], ,, INFO, , Switch domain () does not support defined database. Probable Cause Indicates a remote Brocade switch is running a downlevel version of Fabric OS that does not support the defined database. Recommended It is recommended to - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 721
Message , [ZONE-1050], ,, INFO, , The Interop Safe Zoning mode is set to Enabled. Probable Cause Indicates that the Interop Safe Zoning mode is enabled. Recommended Verify if the Safe Zoning mode change was done on purpose. Action Severity INFO ZONE-1051 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 722
mode. Action Severity WARNING ZONE-1055 Message , [ZONE-1055], ,, WARNING, , McDATA default zone enabled with Frame Redirection zones. Probable Cause Indicates that frame redirection will not function properly with McDATA default zoning. Recommended - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 723
667 •AUDIT FICU System Messages 669 •AUDIT FW System Messages 671 •AUDIT HTTP System Messages 673 •AUDIT IPAD System Messages 675 •AUDIT PORT System Messages 677 •AUDIT SEC System Messages 679 •AUDIT SNMP System Messages 695 •AUDIT SULB System Messages 697 •AUDIT SWCH System Messages 709 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 724
- HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 725
AUDIT AG System Messages Chapter 112 AG-1029 Message AUDIT, , [AG-1029], INFO, CFG, , , , F_Port to N_Port mapping has been updated for N_Port . Probable Cause Indicates that the F_Ports mapped to an N_Port have changed and the config - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 726
11 AG-1029 656 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 727
is reported> seconds were affected by this condition. Probable Cause Indicates that the attached device is slow in responding to frames going out of this port. This latency may be inherent in the device or due to heavy workload on the device. Recommended Find the Top Talkers in the egress - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 728
11 AN-1003 658 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 729
AUDIT AUTH System Messages Chapter 114 AUTH-3001 Message AUDIT, , [AUTH-3001], INFO, SECURITY, , , , Event: , Status: success, Info: type has been changed from [] to []. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 730
specified port is off, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch the supportSave command and contact your switch service provider. Severity INFO 660 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 731
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO AUTH-3008 Message AUDIT, , [AUTH- location>, , Event: , Status: failed, Info: Port has been disabled due to authentication failure with code '< - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 732
11 AUTH-3008 662 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 733
AUDIT BLS System Messages Chapter 115 BLS-1002 Message , [BLS-1002], ,, INFO, , An IPsec/IKE policy was added. Probable Cause Indicates that an IPsec or IKE policy was added and the configuration file was updated. Recommended No action is required. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 734
11 BLS-1003 664 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 735
of configuration parameters that were downloaded. If admin domain (AD) is enabled, the AD number is specified in the description. Recommended No action is switch was unsuccessful because there are one or more parameters that require the switch to be disabled. Recommended Disable the switch using - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 736
11 CONF-1022 666 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 737
AUDIT FCIP System Messages Chapter 117 FCIP-1002 Message AUDIT, , [FCIP-1002], INFO, CFG, , , , An IPsec/IKE policy was added. Probable Cause Indicates that an IPsec/IKE policy was added and the config file was updated. Recommended No action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 738
11 FCIP-1003 668 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 739
, , [FICU-1011], INFO, CFG, , , , FMS mode has been enabled. Probable Cause Indicates that the FICON Management server mode has been enabled. Recommended No action is required. Action Severity INFO FICU-1012 Message AUDIT, , [FICU - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 740
11 FICU-1012 670 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 741
, , , , Event: , Status: success, Info: Probable Cause Indicates that Port Fencing was enabled/disabled successfully. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 671 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 742
11 FW-3001 672 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 743
-1002 Message AUDIT, , [HTTP-1002], INFO, ZONE, , , , Zoning transaction initiated by User: , Role: completed successfully. Probable Cause Indicates that the zoning database has been changed. Recommended Verify that the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 744
12 HTTP-1003 674 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 745
[IPAD-1002], INFO, CFG, , , , Switchname has been successfully changed to . Probable Cause Indicates that a change with the switch name has occured. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 675 53 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 746
12 IPAD-1002 676 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 747
action is required. Action Severity INFO PORT-1008 Message AUDIT, , [PORT-1008], INFO, CFG, , , , GigE Port (ID: ) has been enabled. Probable Cause Indicates a GigE port has been enabled. Recommended No action is required. Action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 748
12 PORT-1009 Probable Cause Indicates a GigE port has been disabled. Recommended No action is required. Action Severity INFO 678 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 749
WARNING SEC-3001 Message AUDIT, , [SEC-3001], INFO, SECURITY, , , , Event: , Status: success, Info: Security mode on the fabric. Probable Cause Indicates the security mode of the fabric was either - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 750
Probable Cause Indicates the specified security event has occurred. The Event Name can be one of the following: • There has been an fabric configurations server (FCS) failover. • A security policy has been activated. • A security policy has been saved. • A security policy has been aborted. • A non - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 751
-details>, , , Event: , Status: success, Info: Removed members from policy . Probable Cause Indicates a user has removed the specific members from the specified security policy. Note: If you use a wildcard (for example, an asterisk) in - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 752
, Info: FCS member moved from position to . Probable Cause Indicates the fabric configuration server (FCS) list has security stat(s) reset>] security stat(s). Probable Cause Indicates a user has reset all the security statistics. Recommended Action Verify - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 753
, Status: success, Info: RADIUS server for AAA services. Probable Cause Indicates a user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify the RADIUS configuration was changed intentionally. If the - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 754
: success, Info: Moved RADIUS server to position . Probable Cause Indicates a user has changed the position of the remote authentication dial-in user service (RADIUS) server. Recommended Action Verify the RADIUS server position was intentionally changed. If the RADIUS - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 755
12 SEC-3018 SEC-3018 Message AUDIT, , [SEC-3018], INFO, SECURITY, , , , Event: , Status: success, Info: Parameter [] changed from [] to []. Probable Cause Indicates the specified passwdCfg - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 756
: success, Info: Successful logout by user []. Probable Cause Indicates the specified user has successfully logged out. Recommended No action after the lockout duration has expired or an administrator Action may manually unlock the account. Severity INFO SEC-3024 Message AUDIT, - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 757
>] added. Role: [], Password [], Home AD [], AD list []. Probable Cause Indicates a new user account was created. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 758
, SECURITY, , , , Event: , Status: success, Info: Backup user account \"\" recovered. Probable Cause Indicates that back user accounts were recovered. Recommended Action Verify the security event was planned. If the security - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 759
, , Event: , Status: success, Info: Switch is configured to database. Probable Fabric wide configuration set to . Probable Cause Indicates the specified event has occurred. Recommended Verify - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 760
12 SEC-3036 Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-3036 Message AUDIT, , [SEC- - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 761
was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the specified protocol connection. Take Action appropriate action as defined by your enterprise security policy. Severity INFO SEC-3044 Message - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 762
execute this command. Recommended Verify the user has the required permission to execute this command. Action Severity INFO SEC-3048 Message AUDIT, , [SEC-3048], INFO, SECURITY, , , FIPS mode has been enabled in the system using force option - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 763
12 SEC-3051 Probable Cause Indicates the specified sshutil operation was performed.. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 764
12 SEC-3051 694 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 765
>, , Incorrect SNMP configuration. Probable Cause Indicates that the simple network management protocol (SNMP) configuration s incorrect and the SNMP service will not work correctly. Recommended Reset the SNMP configuration to default. Action Severity ERROR SNMP-1005 Message AUDIT, - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 766
12 SNMP-1006 696 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 767
continue without disruption. Do not fail over or power down the system during firmware upgrade. Run the firmwareDownloadStatus command for more information. Cause Indicates the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 768
failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 769
secondary partition. Please use firmwareDownloadStatus and firmwareShow to see firmware status." "firmwareDownload has started on Standby CP. up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 770
0x7f "Standby CP reboots." 0x80 "Standby CP failed to reboot." 0x81 "Standby CP booted up with new firmware." 0x82 "Standby CP failed to boot up with new firmware." 0x83 "There was an unexpected reboot during firmwareDownload. The command is aborted." 0x84 "Standby CP was not responding - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 771
required package list file. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package." 0x15 "Unable to create firmware version file - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 772
firmware, or contact your service power off these blades before 0x30 " "Cannot downgrade due to presence of long-distance ports firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware command. If the problem persists, contact your system - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 773
type in the chassis. Remove or power off the unsupported blades before proceeding. firmware packages on the file server, then retry firmwareDownload. If the problem switch, when firmwareDownload fails, the command will synchronize the firmware on the two partitions of each CP by starting a firmware - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 774
the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO SULB problem persists, contact your switch service provider. Severity ERROR SULB-1018 Message Probable Cause AUDIT, , [SULB-1018], ERROR, FIRMWARE - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 775
the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message AUDIT, , [SULB-1021], WARNING, FIRMWARE, , , , Firmware is being downloaded to the blade in slot - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 776
command to monitor the progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message AUDIT, , [SULB-1024], WARNING, FIRMWARE, , , , Firmware commit has completed on the blade in slot - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 777
command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , [SULB-1032], WARNING, FIRMWARE, , , , Relocating an internal firmware image on the CP. Probable Cause - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 778
to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1037 Message AUDIT, , [SULB-1037], ERROR, FIRMWARE, , , , HCL failed. Reboot the switch manually using the reboot command. However - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 779
-1012], INFO, CFG, , , , Trunk Area () has been enabled for one or more ports. Probable Cause Indicates a Trunk Area has been enabled for one or more ports and the config file has been updated. Recommended No action is required. Action Severity - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 780
126 SWCH-1014 710 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 781
[UCST-1021], INFO, CFG, , , , In-order delivery option has been enabled. Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery of frames during topology changes. Recommended No action is required - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 782
INFO, CFG, , , , In-order delivery option has been enabled with Lossless-DLS option. Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery of frames during topology changes. Recommended No action - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 783
Severity INFO 127 UCST-1027 Fabric OS Message Reference 713 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 784
127 UCST-1027 714 Fabric OS Message Reference 53-1001338-01 - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 785
AUDIT ZONE System Messages Chapter 128 ZONE-3001 Message AUDIT, , [ZONE-3001], INFO, ZONE, , , , Event: , Status: success, Info: \"\" added to \" - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 786
128 ZONE-3004 The zone object type can be "alias", "zone member", "zone" or "zone configuration". The string "..." appears at the end of the zone object member list if the list was truncated in the message. Recommended Verify the event was planned. If the event was planned, no action is required. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 787
-details>, , , Event: , Status: success, Info: Zone configuration \"\" enabled. . Probable Cause Indicates the specified zone configuration has been enabled. Recommended Verify the event was planned. If the event was planned, no action is - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 788
128 ZONE-3011 Severity INFO ZONE-3011 Message AUDIT, , [ZONE-3011], INFO, ZONE, , , , Event: , Status: success, Info: Zone object \"\" expunged. Probable Cause Indicates the specified zone object has been expunged - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 789
128 ZONE-3015 An AD object set type is "AD member". The string "..." appears at the end of the AD object member list if the list was truncated in the message. Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not Action planned, take - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 790
128 ZONE-3018 ZONE-3018 Message AUDIT, , [ZONE-3018], INFO, FABRIC, , , , Event: , Status: success, Info: has been deactivated. Probable Cause Indicates the specified admin domain (AD) object has been deactivated. - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 791
128 ZONE-3022 Severity INFO ZONE-3022 Message AUDIT, , [ZONE-3022], INFO, FABRIC, , , , Event: , Status: success, Info: Current AD configuration saved to flash. Probable Cause Indicates the current admin domain (AD) configuration - HP StorageWorks 8/80 | Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 792
128 ZONE-3025 Severity INFO 722 Fabric OS Message Reference 53-1001338-01
53-1001338-01
28 July 2009
®
Fabric OS
Message Reference
Supporting Fabric OS v6.3.0