HP StorageWorks TL895 Connection Information for the Enterprise Backup Solutio
HP StorageWorks TL895 Manual
 |
View all HP StorageWorks TL895 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks TL895 manual content summary:
- HP StorageWorks TL895 | Connection Information for the Enterprise Backup Solutio - Page 1
be used. 3. Refer to Quick Setup Guide (P/N 330558) to connect TL895 Tape Library to the EBS. 4. Reboot via Compaq Services 5J90400005 On-site Revision required via Compaq Services 2G91CBB5X014 Customer q www.compaq.com/products/storageworks/ q www.compaq.com/support/files/ q Seagate Software
-
1
 |
 |
IMPORTANT
TL895 Tape Library
Connection Information to the Enterprise Backup
Solution
IMPORTANT:
Current Enterprise Backup Solution configurations support the
DLT-15 Cartridge Library
or
the TL895 Tape Library,
not
both simultaneously.
This document will assist with the removal of a Compaq DLT-15
Cartridge Library prior to installing a TL895 Tape Library to the
Enterprise Backup Solution (EBS). It also provides information on
compatibility with previous releases of the TL895.
WARNING:
Before making any changes, make sure power is
off
to the
DLT-15 Cartridge Library and the power cord is removed.
Also turn
power
off
to the Fibre Channel Tape Controller.
Removing a Compaq DLT-15 Cartridge Library
from the EBS
1.
Turn off power and remove power cord to DLT-15 Cartridge
Library. Turn off power on Fibre Channel Tape Controller
(FCTC).
2.
Remove DLT-15 Cartridge Library from the EBS:
a.
Unplug SCSI cable from FCTC if you intend to use a new
SCSI cable for the new library, or;
b.
Unplug SCSI cable from DLT-15 Cartridge Library if you
intend to reuse the existing SCSI cable.
NOTE:
A SCSI cable and differential terminator must be used.
3.
Refer to Quick Setup Guide (P/N 330558) to connect TL895
Tape Library to the EBS.
4.
Reboot primary server to recognize the new device.
5.
Consult backup application documentation to configure new
Library to the EBS.
Enterprise Backup Solution Compatibility
The serial numbers indicated below require revisions of the TL895.
Series
Version:
A01
B01
C01
EBS Compatible
S/N Start
5J83400001
5J83400001
2G91CBB5T001
S/N End
5J90400005
5J90400005
2G91CBB5X014
Revision
Method
On-site Revision
required via
Compaq Services
On-site Revision
required via
Compaq Services
Customer
Configuration of
Robotic S/N
*
(see websites
below)
NOTE:
If your system is a Series A01 or B01, contact your Compaq
Services Representative for on-site revision information.
Phone support
may be accessed by calling 1-800-OKCOMPAQ
.
IMPORTANT:
Only certified service representatives are qualified to implement
these system revisions.
Compaq recommends visiting the following websites:
*
For Robotic serial number configuration:
q
Customer Advisor at:
www.compaq.com/support/techpubs/customer_advisories
Latest drivers, diagnostic tools, documentation and software:
q
www.compaq.com/products/storageworks/
q
www.compaq.com/support/files/
q
Seagate Software at:
www.seagatesoftware.com
NOTE:
SmartStart version 4.21 or later and Storage Management Solutions 3.20
or later support EBS.
© 1999 Compaq Computer Corporation. All rights reserved.
Printed in the U.S.A.
Compaq,
registered United States Patent and Trademark Office.
First Edition (April 1999)
Part Number 128653-001
128653- 001