HP TouchSmart 300-1100z Upgrading and Servicing Guide
HP TouchSmart 300-1100z Manual
View all HP TouchSmart 300-1100z manuals
Add to My Manuals
Save this manual to your list of manuals |
HP TouchSmart 300-1100z manual content summary:
- HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 1
*584963-001* *584963-001* Printed in HP Touchsmart300 PC Upgrading and Servicing Guide Replacing a Wireless Keyboard or Mouse .......2 Before You Begin 2 Replacing the Keyboard or Mouse 2 Replacing Batteries 3 Upgrading or Replacing Memory 6 Before You Begin 6 Computer Preparation 6 Removing - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 2
ii 584963-001 - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 3
HP Touchsmart300 PC Replacing a Wireless Keyboard or Mouse - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 4
Begin Two replacement kits are available: z Wireless keyboard z Wireless mouse with wireless receiver IMPORTANT: The keyboard and mouse must be next to the HP PC, within 1 foot (30 cm) and away from interference with other devices. Replacing the Keyboard or Mouse 1 Leave the computer on. 2 If you - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 5
power switch on the bottom, turn on the mouse power switch (A). The keyboard does not have a power switch, so you can skip this step if you are installing the keyboard only. 6 Press the blue connect button If repeated attempts at synchronization do not work, you may need to replace the batteries - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 6
4 584963-001 - Replacing a Wireless Keyboard or Mouse - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 7
HP Touchsmart300 PC Upgrading or Replacing Memory - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 8
computer. z Avoid touching sharp edges inside the computer. Computer Preparation 1 Remove any media (CD, DVD, and memory cards) from the computer. 2 Shut down the computer. 3 Unplug the computer by disconnecting the power cord from the back of the computer. 4 Unplug all attached cables from the - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 9
that secures the right cover. 10 Hold the card by its edges, and remove it from the compartment. 8 Slide the right cover off. 584963-001 - Upgrading or Replacing Memory 7 - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 10
right cover screw. 3 Gently push downward on the card to snap it into place. 6 Reconnect any cables that were disconnected for this procedure. 8 584963-001 - Upgrading or Replacing Memory - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 11
and then into the power source. 8 Return the computer to the upright position and turn on the computer. Troubleshooting [This section needs to GB maximum installable memory. Actual available memory that can be used in Windows will be less. z Because the memory uses dual channels, you should use - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 12
10 584963-001 - Upgrading or Replacing Memory - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 13
HP Touchsmart300 PC Removing and Replacing a Hard Disk Drive - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 14
computer. z Avoid touching sharp edges inside the computer. Computer Preparation 1 Remove any media (CD, DVD, and memory cards) from the computer. 2 Shut down the computer. 3 Unplug the computer by disconnecting the power cord from the back of the computer. 4 Unplug all attached cables from the - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 15
Removing the Hard Disk Drive 6 Lift the plastic shield on the back of the computer stand. 9 Loosen the screw at the bottom of the hard disk drive cage. TIP: You do not need to remove this screw, only loosen it in order to release the hard disk drive cage. 7 Use a torx or flat-head screwdriver to - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 16
12 Remove the four screws that hold the drive in the cage. Remove the drive from the cage. Installing a New Hard Disk Drive 1 Insert the new hard disk drive into the cage. Make sure that the hard drive is inserted with the label on the bottom. 2 Install and tighten the four screws that hold the - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 17
left cover screw. 6 Tighten the captive screw on the hard disk drive cage. 9 Reconnect any cables that were disconnected for this procedure. 10 Plug the power cord into the back of the computer and then into the power source. 584963-001 - Removing and Replacing a Hard Disk Drive 15 - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 18
11 Return the computer to the upright position and turn on the computer. 16 584963-001 - Removing and Replacing a Hard Disk Drive - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 19
HP Touchsmart300 PC Removing and Replacing a CD/DVD Drive - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 20
computer. z Avoid touching sharp edges inside the computer. Computer Preparation 1 Remove any media (CD, DVD, and memory cards) from the computer. 2 Shut down the computer. 3 Unplug the computer by disconnecting the power from the back of the computer. 4 Unplug any attached cables from the back of - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 21
on the back of the computer stand. 9 Loosen the screw at the back of the CD/DVD drive cage. TIP: You do not need to remove this screw, only loosen it in order to release the CD/DVD drive cage. 7 Use a torx or flat-head screwdriver to remove the screw that secures - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 22
drive forward to remove it from the cage. 12 Use the small Phillips screwdriver to remove the four screws that secure the CD/DVD drive in the cage. Two screws are on each side. TIP: These screws are very small and can be lost easily. Use caution when - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 23
sure that the two arrows next to the screw at the rear of the cage line up. 5 Tighten the screw at the rear of the CD/DVD drive cage. TIP: Do not over-tighten these screws. It is easy to strip the screw heads. 584963-001 - Removing and Replacing - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 24
. 8 Reconnect any cables that were disconnected for this procedure. 9 Plug the power cord into the back of the computer and then into the power source. 7 Replace the left cover screw. 10 Return the computer to the upright position and turn on the computer. 22 584963-001 - Removing and Replacing - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 25
23 584963-001 - Removing and Replacing a CD/DVD Drive - HP TouchSmart 300-1100z | Upgrading and Servicing Guide - Page 26
Copyright © 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Version: 1.0
584963-001
i
Printed in
Replacing a Wireless Keyboard or Mouse
.......
2
Before You Begin
.................................................
2
Replacing the Keyboard or Mouse
.........................
2
Replacing Batteries
..............................................
3
Upgrading or Replacing Memory
....................
6
Before You Begin
.................................................
6
Computer Preparation
..........................................
6
Removing the Memory
.........................................
7
Installing a New Memory Card
.............................
8
Troubleshooting
...................................................
9
Removing and Replacing a Hard Disk Drive ..12
Before You Begin
...............................................
12
Computer Preparation
........................................
12
Removing the Hard Disk Drive
.............................
13
Installing a New Hard Disk Drive
.........................
14
Removing and Replacing a CD/DVD Drive
.....
18
Before You Begin
...............................................
18
Computer Preparation
........................................
18
Removing the CD/DVD Drive
..............................
19
Installing a New CD/DVD Drive
..........................
21
Upgrading and Servicing Guide
*584963-001*
*584963-001*
HP Touchsmart
300
PC