HP Workstation x1000 hp workstations general - CD-RW installation guide, read

Hewlett-Packard Company

3404 East Harmony Road

Fort Collins, Colorado 80528

Pub. No. A7218-90011

Read Before Using

CD-RW Drives Installed in HP Workstation Systems

Product No. A7212A

The CD-RW software for the 12X/8X/32X CD-RW drive that is installed in your HP

Workstation is

not included in the pre-loaded software. You must install the

Direct

CD

and

Easy CD Creator

applications manually from the Applications CD-ROM

(provided with the Workstation or as an accessory kit)

before you can use the write/

re-write functionality of the drive. The installation of these two software applications

must be performed in the following manner:

1.

Put the Applications CD-ROM into the CD drive.

2.

When the installation window appears, choose the language and then click on

Easy CD Creator

and follow the instructions to install this application.

3.

When the installation wizard returns, choose

Exit

and then remove the Applica-

tions CD from the drive. Choose

Yes

to restart your system.

4.

When the system has restarted and you are logged in, repeat steps 1 and 2 above,

this time selecting

Direct CD

as the application to install.

5.

When the installation wizard returns, once again choose

Exit

, remove the CD

and choose

Yes

to restart the system.

6.

When the system has been restarted the second time, you are ready to use the full

functionality of the CD-RW drive.

If you do not install these two software packages, you can only use the CD-RW

drive’s read functionality.

Technical Computer Division

Hewlett-Packard