HP Z1 Quick Reference Card

HP Z1 Workstation

Quick Reference Card

685889-002

Hewlett-Packard is committed to reducing the environmental impact of our products. As part of our continuing efforts, we are moving more

content to the web and your hard drive. This card directs you to appropriate resources. Thank you for purchasing an HP Workstation!

Quick Setup

1

Carefully remove the workstation from the box and place it

on a sturdy, level surface. Remove all plastic packaging.

NOTE:

Before you begin the setup procedures, please read

the Warnings included herein.

2

Push down firmly to unload the

latch in the stand.

3

Grasp the bottom and top edge of the workstation. Push

and hold the green button to raise the workstation to its

maximum horizontal height.

4

Connect the power cord to

the workstation.

5

Grasp the bottom and

top edge of the

workstation to maneuver

to the desired angle.

6

Route the power cord through

the stand and plug it into an

easily accessible, grounded

(earthed) three-pin outlet.

7

Press the power button.

8

For a wireless keyboard and

mouse, turn on power on

mouse (1); remove battery tab

on bottom of keyboard. Press

Connect

buttons on mouse (2)

and keyboard (3) for five

seconds.

Note:

The HP Z1 Workstation also

supports a wired keyboard and

mouse.

9

Refer to the user guide for instructions on connecting to a

network using the Wireless LAN, wired LAN, or Bluetooth.

10

Connect other peripheral components (such as a printer)

according to the instructions included with the device.

Warnings

WARNING!

To reduce the risk of electric shock or damage to your equipment:

—

Plug the power cord into an AC grounded (earthed) outlet.

—

Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from

the computer).

—

Do not disable the power cord grounding pin, for example, by attaching a two-pin adapter. The grounding pin is an important

safety feature.

Continued