HP Z3100ps HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof
HP Z3100ps - DesignJet GP Color Inkjet Printer Manual
UPC - 808736859547
View all HP Z3100ps manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Z3100ps manual content summary:
- HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 1
HP LF Printing Knowledge Center Add and profile a new paper type Printer: HP Designjet Z3100 series Operating System: Windows - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 2
your printer. 3. Color Center tab > Select Create and Install ICC Profile. 4. The HP Color Center prompts for information about the new paper to create and installs the ICC new profile: Select Paper and Action > • Select a paper type... > Select Add a new paper. • Select Action > Select Print target - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 3
the name of your new custom paper (ex. "Instant-Dry Photo Gloss paper"). • Paper type: Select the type of your new custom paper. The paper type determines the amount of ink used and other basic printing parameters; choose a paper type that mostly resembles your media. If the results are not to - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 4
and installed with the specified name and settings: • ICC Profile Name: Enter the name of your new profile. • Check Gloss Enhancer. You can profile a photo paper with the gloss enhancer on or off. The two profiles will be different, so you are recommended to save them under different names. 4 - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 5
> When you have defined and calibrated a new paper type, the printer automatically creates and installs the new ICC profile, to be used with your paper. The process takes about 15-20 minutes and consists of the following steps: • A profiling test chart is printed. An A3 or B format for cut sheets: 5 - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 6
of time depends on the paper type. • The test chart is scanned and measured using the HP Embedded Spectrophotometer. Finished > The new ICC profile is stored in the system folder on your computer: C:\WINDOWS\system32\spool\drivers\color\ The profile is also stored in the printer, so that other - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 7
If you are printing on HP Collector Satin Canvas and you experience that this media cannot be calibrated or profiled with the embedded spectrophotometer of the printer; you should try one of the following: - Create an ICC profile with an external device. - Print using Printer Color Management option - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 8
For more information on HP Designjet products www.hp.com/go/designjet © 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying
HP LF Printing Knowledge Center
Add and profile a new paper type
Printer:
HP Designjet Z3100 series
Operating System:
Windows