HP Z3100ps HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof
HP Z3100ps - DesignJet GP Color Inkjet Printer Manual
![]() |
UPC - 808736859547
View all HP Z3100ps manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Z3100ps manual content summary:
- HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 1
HP LF Printing Knowledge Center Add and profile a new paper type Printer: HP Designjet Z3100 series Operating System: Mac OS X - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 2
Selector page will be open. Select your printer and select Launch Utility. 3. Configuration settings (left hand menu): Select Create and Install ICC Profile. • Select Create. 4. The HP Color Center prompts for information about the new paper, this is to create and install a new ICC profile: 2 - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 3
name of your new custom paper (ex. "Photo Imaging Satin"). • Paper type: Select the type of your new custom paper. The paper type determines the amount of ink that will be used and other basic printing parameters; choose a paper type that most closely resembles your media. If the results are not - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 4
• Select Continue. Select Action > • Select Print ICC profiling chart. • Select Scan ICC profiling chart and create ICC profile. 4 - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 5
to create a profile (Select only Print ICC profiling chart). When the chart is completely dry, you can restart the HP Color Center and ask it to create settings. • Check Gloss Enhancer if you are printing on photo gloss paper. You can profile a photo paper with the gloss enhancer on or off. The two - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 6
• Select Continue. Calibrate Your Printer > • Load the new paper into the printer (A3/B size). • Select Continue. 6 - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 7
a new paper type, the printer automatically creates and installs the new ICC profile, this is to be used with your paper. The process takes about 15-20 minutes and consists of the following steps: 1. A profiling test chart is printed: An A3 or B format for cut sheets: A roll-paper format for roll - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 8
that has just been created. • Select Done and OK. NOTE: If you are printing on HP Collector Satin Canvas and you experience that this media cannot be calibrated or profiled with the embedded spectrophotometer of the printer; you should try one of the following: - Create an ICC profile with an - HP Z3100ps | HP Designjet Z3100 Printing Guide [HP Raster Driver] - Add and prof - Page 9
For more information on HP Designjet products www.hp.com/go/designjet © 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying
![](/manual_guide/products/hewlettpackard-z3100-hp-designjet-z3100-printing-guide-hp-raster-driver-add-profile-new-paper-type-mac-os-x-9bc4461/1.png)
HP LF Printing Knowledge Center
Add and profile a new paper type
Printer:
HP Designjet Z3100 series
Operating System:
Mac OS X