HP Z800 HP Z800 Workstation - NVIDIA Tesla C1060 Compute Processor card instal
HP Z800 - Workstation - 6 GB RAM Manual
UPC - 884962082454
View all HP Z800 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Z800 manual content summary:
- HP Z800 | HP Z800 Workstation - NVIDIA Tesla C1060 Compute Processor card instal - Page 1
HP 800 Workstation. Kit contents ● NVIDIA Tesla C1060 Compute Processor card ● 6-to-8 pin auxiliary power adapter cable ● Installation instructions (this document) ● Warranty information Before you begin To determine the compatibility of this product with your HP workstation, see QuickSpecs online - HP Z800 | HP Z800 Workstation - NVIDIA Tesla C1060 Compute Processor card instal - Page 2
-free mat, static strap, and peripheral units to that piece of equipment. NOTE: HP accessories are for use in HP Workstation products. They have been extensively tested for reliability and are manufactured to high quality standards. 2 NVIDIA Tesla C1060 Compute Processor card installation ENWW - HP Z800 | HP Z800 Workstation - NVIDIA Tesla C1060 Compute Processor card instal - Page 3
in the service guide for your workstation at http://www.hp.com/support/ workstation_manuals. NOTE: For the HP Workstation series, these procedures are also available in the User Guide on the Documentation and Diagnostics CD that shipped with your workstation. 2. Power down the workstation, and then - HP Z800 | HP Z800 Workstation - NVIDIA Tesla C1060 Compute Processor card instal - Page 4
the chassis, rotate the graphics card bulkhead under the rear chassis lip . 2. Align the card in a groove of the card guide 2 and pivot the card until level. 3. Press securely into the PCIe expansion slot . Figure 2 Installing the card 4 NVIDIA Tesla C1060 Compute Processor card installation ENWW - HP Z800 | HP Z800 Workstation - NVIDIA Tesla C1060 Compute Processor card instal - Page 5
the expansion card support. 2. Reinstall the side access panel. 3. Reconnect power to the workstation and all external devices. 4. Restore power to the workstation and all external devices. Step 7-Configuring the software For instructions on loading and setting up the graphics drivers, see the - HP Z800 | HP Z800 Workstation - NVIDIA Tesla C1060 Compute Processor card instal - Page 6
Japanese. See http://www.hp.com/support/workstation_manuals, then select your workstation product and select Japanese from the drop down Manual Language menu. http://www.hp.com/support/workstation_manuals Manual Language Japanese 6 NVIDIA Tesla C1060 Compute Processor card installation ENWW
NVIDIA Tesla C1060 Compute Processor
card installation
Introduction
This document describes how to install an NVIDIA Tesla C1060 Compute Processor card with an
auxiliary power adapter cable in an HP
800 Workstation.
Kit contents
●
NVIDIA Tesla C1060 Compute Processor card
●
6-to-8 pin auxiliary power adapter cable
●
Installation instructions (this document)
●
Warranty information
Before you begin
To determine the compatibility of this product with your HP workstation, see
QuickSpecs
online at
go/productbulletin
.
Before installing an NVIDIA Tesla C1060 compute processor card, ensure the following criteria are met:
●
HP
800 Workstations must contain an 1110 Watt power supply.
●
The NVIDIA Tesla C1060 Compute Processor card is a dedicated computational unit, and must
be used in conjunction with a compatible graphics card.
© 2009 Hewlett-Packard Development Company, L.P. Printed in the U.S.
ENWW
Introduction
1