HP bc1000 HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed
HP bc1000 - Blade PC Manual
 |
View all HP bc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP bc1000 manual content summary:
- HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 1
Service Reference Guide HP Blade PC bc1000 and bc1500 Series 5th Edition This document provides information on spare parts, the removal and replacement of all parts, as well as information on troubleshooting, POST error messages, and diagnostic indicator lights. Document Part Number 352971-005 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 2
- HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 3
Service Reference Guide HP Blade PC bc1000 and bc1500 Series 5th Edition Document Part Number: 352971-005 1st Edition (March 2004) 5th edition (May 2007) May 2007 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 4
contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated or loss of information. Service Reference Guide HP Blade PC bc1000 and bc1500 Series 1st Edition (March 2004) 5th Edition (May 2007) Document Part Number: 352971-005 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 5
Contents 1 Spare Parts 1.1 Spare Parts 1-1 2 Removal and Replacement 2.1 Returning the Blade PC 2-1 2.2 Removal and Replacement 2-1 2.2.1 Powering Down the Blade PC 2-1 2.2.2 Removing the Blade PC 2-2 2.2.3 Replacing the Memory 2-3 2.2.4 Installing the Optional Graphics Diagnostic Card 2-5 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 6
Contents Service Reference Guide bc1000 and bc1500 352971-005 iv - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 7
1.1 Spare Parts 1 Spare Parts Spare Parts Item Description bc1000 Spare bc1500 Spare Part Number Part Number 1 Blade PC complete with 1 memory module 4, 404273-001 404273-001 hard drive 2, and RTC battery 5 1 Blade PC complete with 1 memory module 1, N/A hard drive 2, and RTC battery 3 ( - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 8
Spare Parts 1-2 352971-005 Service Reference Guide bc1000 and bc1500 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 9
installed on the Blade PC. Only the original amount of memory will be shipped on the replacement unit 2.2 Removal and Replacement 2.2.1 Powering Down the BladeSystem PC 1. Ensure the blade PC is not active by verifying that the Health LED (Item 2) is off. Service Reference Guide bc1000 and bc1500 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 10
front of the blade PC above. To perform an emergency shut down of the blade PC, press and hold the blade power button for four seconds. Ä CAUTION: Performing an emergency shutdown on a blade PC may result in the loss of any unsaved data. 2-2 352971-004 Service Reference Guide bc1000 and bc1500 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 11
PC To remove a blade PC: 1. Power down the blade PC. See "Removal and Replacement" on page 1 2. Press the release latch 1. 3. Pull down the ejector lever 2. 4. Remove the blade PC from the enclosure. To install a new blade PC, reverse the removal procedures. Service Reference Guide bc1000 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 12
the Memory 1. Power down the blade PC. See "Removal and Replacement" on page 1 2. Remove the blade. 3. Release the latches on each side of the DIMM slot 1. This will allow the module to rotate upwards. 4. Remove the DIMM from the slot 2. 2-4 352971-004 Service Reference Guide bc1000 and bc1500 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 13
the notch in the socket. 2. Press the DIMM down towards the board 2, ensuring that it is fully seated and the two latches snap into place. Service Reference Guide bc1000 and bc1500 352971-004 2-5 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 14
PC. 2. Remove the blade. 3. Lay the Blade PC down on a flat surface and install the graphics card into the sockets. ✎ The card's pins are keyed so that it will only install one way. To remove the card, pull it firmly, straight out of the sockets. 2-6 352971-004 Service Reference Guide bc1000 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 15
on the front of the blade 1. 3. Tighten the thumbscrews that secure the adapter in place 2. Attaching the USB 1.1 diagnostic adapter Attaching the USB 2.0 diagnostic adapter To remove the diagnostic adapter, reverse the removal procedures. Service Reference Guide bc1000 and bc1500 352971-004 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 16
Removal and Replacement 2-8 352971-004 Service Reference Guide bc1000 and bc1500 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 17
Password jumper Graphics diagnostic card connector (outboard) Graphics diagnostic card connector (inboard) CMOS reset button RTC battery Memory module socket 1 Memory module socket 2 Processor socket Service Reference Guide bc1000 and bc1500 352971-005 3-1 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 18
. 4. Power up the unit. The password is now removed. 3.2.2 Establish a Setup Password Power down the Blade PC. 1. Remove the blade. 2. Remove the jumper from the E49 header. 3. Power up and Use F10 retup to establish the setup pasword. 3-2 352971-005 Service Reference Guide bc1000 and bc1500 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 19
graphics diagnostic card. • Replace blade. Red 7 Blinks Blade system board Replace blade. failure Amber* Solid Bad ROM Upgrade • Flash ROM. • Download or use a different ROM image. *Main power turned on #Main power turned off Service Reference Guide bc1000 and bc1500 352971-005 4-1 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 20
Enclosure or blade system board power failure If enclosure Health is OK, move blade to different bay. If: • problem follows the move, replace the blade. • problem is solved - enclosure backplane problem. *Main power turned on #Main power turned off 4-2 352971-005 Service Reference Guide bc1000 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 21
. • Replace blade. Amber • Run Drive Protection System test if applicable. • Apply firmware patch (www.hp.com/support). • Back up contents and replace the hard drive. Amber • Run Computer Setup IDE self test from Computer Setup. • Replace hard drive. Service Reference Guide bc1000 and bc1500 - HP bc1000 | HP Blade PC bc1000 and bc1500 Series Service Reference Guide (4th Ed - Page 22
Replace blade. Amber • Run Computer Setup IDE self test from Computer Setup. • Replace hard drive. • Replace blade. Amber • Check that enclosure fans .hp.com. • Run Computer Setup, enter serial number under Security, System ID, then save changes. 4-4 352971-005 Service Reference Guide bc1000
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
Service Reference Guide
HP Blade PC bc1000 and bc1500 Series
5th Edition
This document provides information on spare parts, the removal and
replacement of all parts, as well as information on troubleshooting, POST
error messages, and diagnostic indicator lights.
Document Part Number 352971-005