Section |
Page |
Technical Reference |
1 |
Technical Reference |
1 |
Technical Reference |
1 |
HP Visualize J6700 Workstations |
1 |
Manufacturing Part Number: n.a. |
1 |
Edition E0501 |
1 |
Notice |
2 |
Notice |
2 |
The information contained in this document is subject to change without notice. |
2 |
Restricted Rights Legend |
2 |
Restricted Rights Legend |
2 |
Use, duplication, or disclosure by government is subject to restrictions as set forth in subdivis... |
2 |
© Copyright 2001 |
2 |
© Copyright 2001 |
2 |
Hewlett-Packard Company. All Rights Reserved. This document contains proprietary information that... |
2 |
© Copyright 1980, 1984 |
2 |
© Copyright 1980, 1984 |
2 |
AT&T, Inc. |
2 |
© Copyright 1979, 1980, 1983 |
2 |
© Copyright 1979, 1980, 1983 |
2 |
The Regents of the University of California. This software and documentation is based in part on ... |
2 |
Preface |
9 |
Preface |
9 |
This |
9 |
Safety and Regulatory Statements |
9 |
Safety and Regulatory Statements |
9 |
See Appendix A for the safety and regulatory statements that apply to the J6700 workstation. |
9 |
Installation Notice |
9 |
Installation Notice |
9 |
Products designated in the Hewlett-Packard price list as customer installable can be installed us... |
9 |
Related Manuals |
9 |
Related Manuals |
9 |
For more information, refer to the following documents: |
9 |
• Common Desktop Environment (CDE) User’s Guide |
9 |
• Common Desktop Environment (CDE) User’s Guide |
9 |
• Common Desktop Environment (CDE) User’s Guide |
9 |
• Common Desktop Environment (CDE) User’s Guide |
9 |
• Configuring HP-UX for Peripherals |
9 |
• Configuring HP-UX for Peripherals |
9 |
• Configuring HP-UX for Peripherals |
9 |
• HP-UX System Administration Tasks |
9 |
• HP-UX System Administration Tasks |
9 |
• HP-UX System Administration Tasks |
9 |
• HP CDE Getting Started Guide |
9 |
• HP CDE Getting Started Guide |
9 |
• HP CDE Getting Started Guide |
9 |
• Managing Systems and Workgroups |
9 |
• Managing Systems and Workgroups |
9 |
• Managing Systems and Workgroups |
9 |
• Using HP-UX |
9 |
• Using HP-UX |
9 |
• Using HP-UX |
9 |
• Using Your HP Workstation |
9 |
• Using Your HP Workstation |
9 |
• Using Your HP Workstation |
9 |
• Getting Started Guide |
9 |
• Getting Started Guide |
9 |
• Getting Started Guide |
9 |
Note that the documents listed above can be viewed with a web browser using this URL: |
9 |
Revision History |
10 |
Revision History |
10 |
The revision history for each edition of the manual is listed below: |
10 |
Edition |
10 |
Edition |
10 |
Edition |
10 |
Revision History |
10 |
Revision History |
10 |
E0501 |
10 |
E0501 |
10 |
First Printing |
10 |
First Printing |
10 |
Problems, Questions, and Suggestions |
10 |
Problems, Questions, and Suggestions |
10 |
If you have any problems or questions with our hardware, software, or documentation, please conta... |
10 |
Documentation Conventions |
10 |
Documentation Conventions |
10 |
Unless otherwise noted in the text, this guide uses the following symbolic conventions. |
10 |
<TABLE> |
10 |
Table1. Documentation Conventions |
10 |
<TABLE BODY> |
10 |
<TABLE ROW> |
10 |
user-supplied values |
10 |
user-supplied values |
10 |
Italic words or characters in syntax and command descriptions represent values that you must supp... |
10 |
<TABLE ROW> |
10 |
screen display |
10 |
screen display |
10 |
Information that the system displays, commands that you must use literally, and path names appear... |
10 |
<TABLE ROW> |
10 |
Enter |
10 |
Enter |
10 |
Keycaps are presented with a special keycap font as shown in the left column. (In this document, ... |
10 |
Electrostatic Discharge (ESD) Precautions |
10 |
Electrostatic Discharge (ESD) Precautions |
10 |
ESD (electrostatic discharge) |
10 |
ESD (electrostatic discharge) |
10 |
Electrostatic discharge (ESD) |
10 |
• Work on a static-free mat. |
10 |
• Work on a static-free mat. |
10 |
• Work on a static-free mat. |
10 |
• Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your... |
10 |
• Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your... |
10 |
• Create a common ground for the equipment you are working on by connecting the static-free mat, ... |
10 |
• Create a common ground for the equipment you are working on by connecting the static-free mat, ... |
10 |
• Keep uninstalled printed circuit boards in their protective antistatic bags. |
10 |
• Keep uninstalled printed circuit boards in their protective antistatic bags. |
10 |
• Handle printed circuit boards by their edges, once you have removed them from their protective ... |
10 |
• Handle printed circuit boards by their edges, once you have removed them from their protective ... |
10 |
1 Product Information |
11 |
1 Product Information |
11 |
This chapter provides general product information about the HP VISUALIZE J6700 workstation. This ... |
11 |
This chapter provides general product information about the HP VISUALIZE J6700 workstation. This ... |
11 |
Chapter Overview |
12 |
Chapter Overview |
12 |
This chapter contains the following main sections: |
12 |
Product Description |
12 |
Product Description |
12 |
The HP VISUALIZE J6700 workstation is a high-performance system capable of handling the most comp... |
12 |
The J6700 has two PA-8700 microprocessors and sixteen memory slots on its system board. It has ... |
12 |
Net Dimensions and Weights |
12 |
Net Dimensions and Weights |
12 |
The dimensions for the deskside system are listed below. |
12 |
• Depth: 25.8 inches (65.5 cm) |
12 |
• Depth: 25.8 inches (65.5 cm) |
12 |
• Width: 10.0 inches (25.4 cm) |
12 |
• Height: 19.8 inches (53.3 cm) |
12 |
The dimensions for the rack system are listed below. |
12 |
• Depth: 24.5 inches (62.2 cm) |
12 |
• Depth: 24.5 inches (62.2 cm) |
12 |
• Width: 16.7 inches (42.4 cm) |
12 |
• Height: 3.4 inches (8.6 cm) |
12 |
. Table 1-1 lists the net weights for the J6700. |
13 |
NOTE For environmental and electrical requirements, see Appendix B. |
13 |
NOTE For environmental and electrical requirements, see Appendix B. |
13 |
Key Features |
14 |
Key Features |
14 |
The J6700 workstations have the following key features. |
14 |
• CPUs: |
14 |
• CPUs: |
14 |
• Operating System (Native HP-UX): |
14 |
• User Interface: HP CDE (Common Desktop Environment) graphical user interface |
14 |
• Compatibility: Source- and binary-code compatible with the B-, C-, and J-Class product families |
14 |
J5000/J7000 workstation:memory slots |
14 |
J5000/J7000 workstation:memory slots |
14 |
Memory:description of |
14 |
• Power Supply: |
14 |
• Remote Power-On |
14 |
• Remote Power-On |
14 |
• Remote Power-On |
14 |
— Remote power-on feature that allows you to power up and shut down your workstation remotely thr... |
14 |
— Remote power-on feature that allows you to power up and shut down your workstation remotely thr... |
14 |
• Internal Storage Devices: |
14 |
• Standard Networking: Ethernet IEEE 802.3 RJ45, Twisted Pair 10/100 Base T |
14 |
• Standard I/O: Two GB/sec aggregate I/O bandwidth |
14 |
• I/O Expansion Capabilities: 64-bit PCI (Peripheral Connect Interface) slots |
15 |
• Optional Graphics Cards Currently Supported: |
15 |
• Monitors Currently Supported: |
15 |
• Standard Keyboard: The USB connector provides an interface for the keyboard to the system. This... |
15 |
• Mouse: The HP mouse (USB) has left, middle, and right buttons that function the same as most mi... |
15 |
Front Panel Components |
16 |
Front Panel Components |
16 |
Before powering on your system, you should become familiar with the system unit controls. |
16 |
Figure 1-1 shows the front panel components with the bezel attached. |
16 |
Figure11. System Unit Front Panel Controls With Bezel |
16 |
Figure11. System Unit Front Panel Controls With Bezel |
16 |
<GRAPHIC> |
16 |
Figure12. System Unit Front Panel Controls With Bezel Removed |
16 |
<GRAPHIC> |
16 |
CAUTION This workstation is designated for two-person lifting. It weighs approximately 36 to 49 ... |
16 |
Power Switch |
16 |
Power Switch |
16 |
This switch turns the system on and off. When you turn your workstation off, the operating system... |
16 |
Thumbscrew on the Front Panel |
17 |
Thumbscrew on the Front Panel |
17 |
There is one captive thumbscrew near the center of the front panel. Loosening and pulling toward ... |
17 |
Between the LCD panel and the CD ROM drive, there is a threaded hole for an optional locking scre... |
17 |
System LCD |
17 |
System LCD |
17 |
The Liquid Crystal Display (LCD) indicator is located on the front panel. The LCD has two 16 char... |
17 |
Figure13. LCD Symbols |
17 |
Figure13. LCD Symbols |
17 |
<GRAPHIC> |
18 |
Internal Storage Devices |
18 |
The J6700 workstations support the following internal storage devices, which are also located on ... |
18 |
• Up to two hot-pluggable, Low-Voltage Differential (LVD) hard disk drives |
18 |
• Up to two hot-pluggable, Low-Voltage Differential (LVD) hard disk drives |
18 |
• One ATAPI (IDE) Slim-Line CD drive (optional) |
18 |
The following subsections describe these internal storage devices. |
18 |
Hard Disk Drive(s) |
18 |
Hard Disk Drive(s) |
18 |
The J6700 workstations can support up to two hot-pluggable, Low-Voltage Differential (LVD) hard d... |
18 |
The two hard disk drive models currently supported are: |
18 |
• 18 GB LVD 10K RPM disk drive (Product Number A4998A) |
18 |
• 18 GB LVD 10K RPM disk drive (Product Number A4998A) |
18 |
• 18 GB LVD 10K RPM disk drive (Product Number A4998A) |
18 |
• 36 GB LVD 10K RPM disk drive (Product Number A6013A) |
18 |
NOTE The ability to hot plug the hard disk drive(s) requires MirrorDisk/UX (Product Number B2491B... |
18 |
NOTE The ability to hot plug the hard disk drive(s) requires MirrorDisk/UX (Product Number B2491B... |
18 |
The Hot-Plug Process |
19 |
The Hot-Plug Process |
19 |
The physical aspect of inserting and removing a disk drive is discussed in the document that come... |
19 |
There is a significant difference between the terms “hot-pluggable” and “hot-swappable”. Hot swap... |
19 |
The hot-plug process allows you to replace a defective disk drive in a high-available system whil... |
19 |
Replacing a Failed Disk Drive |
19 |
In the context of replacing a failed disk drive, the system administrator must determine which di... |
19 |
• Tracking the error message written by the LVM (Logical Volume Manager) to the system console an... |
19 |
• Tracking the error message written by the LVM (Logical Volume Manager) to the system console an... |
19 |
• If installed, run the diagnostic utility Support Tool Manager (xstm) to determine disk malfunct... |
19 |
The removal of a defective disk drive from an active file system is supported through LVM command... |
19 |
http://www.hgp.com/education/courses/h628s.html |
19 |
http://www.hgp.com/education/courses/h628s.html |
19 |
No graphical user interface is currently offered through the System Administrator Manager (SAM) f... |
19 |
Hot-Plug Example |
20 |
The following example describes a particular system problem where the solution is to replace a ho... |
20 |
Volume group /dev/vg00 contains the two disks, with the logical volume configuration as shown: |
20 |
<TABLE> |
20 |
Table12. Example Configuration |
20 |
<TABLE HEADING> |
20 |
<TABLE ROW> |
20 |
Volume Description |
20 |
Volume Description |
20 |
Volume Description |
20 |
Volume Description |
20 |
<TABLE BODY> |
20 |
<TABLE ROW> |
20 |
Logical Volume 1 |
20 |
Logical Volume 1 |
20 |
Logical Volume 3 |
20 |
Logical Volume 3 |
20 |
<TABLE ROW> |
20 |
Logical Volume 2 |
20 |
Logical Volume 2 |
20 |
Logical Volume 4 |
20 |
Logical Volume 4 |
20 |
<TABLE ROW> |
20 |
Logical Volume 3 |
20 |
Logical Volume 3 |
20 |
Logical Volume 5 |
20 |
hardware address 10/0/12/0.0 10/0/13/0.0 device file (/dev/dsk/) c2t6d0... |
20 |
The system problem for this example is that the disk at hardware address 10/0/13/0.0 has a head c... |
20 |
1. All of the replaced disk’s in-use extents must belong to mirrored logical volumes which were c... |
20 |
1. All of the replaced disk’s in-use extents must belong to mirrored logical volumes which were c... |
20 |
2. You must have an up-to-date configuration backup file. This is done automatically each time an... |
20 |
3. The replacement disk must be the same product ID as the replaced one. |
20 |
NOTE HP often uses different manufacturers for disks having the same product number. The hot-plug... |
20 |
NOTE HP often uses different manufacturers for disks having the same product number. The hot-plug... |
20 |
The replacement disk will have the same capacity and block size as the defective disk because the... |
20 |
The Hot-Plug Procedure |
21 |
These are the steps required to properly hot-plug a disk drive: |
21 |
Step 1 |
21 |
• Check if the LVM found the physical volume to be defective when the volume group was activated. |
21 |
• Check if the LVM found the physical volume to be defective when the volume group was activated. |
21 |
• The |
21 |
• If the status of the “vgchange -v vg02” is unknown, you may check if this occurred by doing a v... |
21 |
• If the disk was defective at vgchange time, the following messages will be printed one or more ... |
21 |
• If you see these messages, the disk was defective at the time the volume group was activated. |
21 |
Otherwise, your disk became defective after the vgchange and you must continue with step 2 of thi... |
21 |
Step 2 |
22 |
• Reduce any logical volumes that have mirror copies on the faulty disk so that they no longer mi... |
22 |
• Reduce any logical volumes that have mirror copies on the faulty disk so that they no longer mi... |
22 |
• Reduce any logical volumes that have mirror copies on the faulty disk so that they no longer mi... |
22 |
— Follow the procedure in the section “Initial System Loader (ISL) Environment” in the chapter “B... |
22 |
— Follow the procedure in the section “Initial System Loader (ISL) Environment” in the chapter “B... |
22 |
— Type |
22 |
— Type this command at the ISL prompt and press |
22 |
The |
22 |
Step 3 |
22 |
• Replace the faulty disk. |
22 |
• Replace the faulty disk. |
22 |
• Do an |
22 |
Step 4 |
22 |
• Restore the LVM configuration/headers onto the replaced disk from your backup of the LVM config... |
22 |
• Restore the LVM configuration/headers onto the replaced disk from your backup of the LVM config... |
22 |
Step 5 |
23 |
• Attach the new disk to the active volume group with the vgchange command. vgchange -a y /d... |
23 |
• Attach the new disk to the active volume group with the vgchange command. vgchange -a y /d... |
23 |
Step 6 |
23 |
• If the disk is not a mirror of a root disk, then skip this step. |
23 |
• If the disk is not a mirror of a root disk, then skip this step. |
23 |
• Run the mkboot command. For example: mkboot /dev/rdsk/c2t5d0 |
23 |
• Run |
23 |
Step 7 |
23 |
• Run the |
23 |
• Run the |
23 |
CD ROM Drive (Optional) |
24 |
CD ROM Drive (Optional) |
24 |
As an optional component, the J6700 workstations support one slim-line CD ROM drive with an ATAPI... |
24 |
Figure 1-4 shows the operating features of the CD ROM drive, and Table 1-3 describes these features. |
24 |
Figure14. CD ROM Drive Features |
24 |
Figure14. CD ROM Drive Features |
24 |
<GRAPHIC> |
24 |
Table13. CD ROM Drive Features |
24 |
<TABLE HEADING> |
24 |
<TABLE ROW> |
24 |
Feature |
24 |
Purpose |
24 |
Purpose |
24 |
<TABLE BODY> |
24 |
<TABLE ROW> |
24 |
Busy Indicator |
24 |
Busy Indicator |
24 |
• Lights during a data access operation and during a data transfer. |
24 |
• Lights during a data access operation and during a data transfer. |
24 |
• Lights during a data access operation and during a data transfer. |
24 |
• Lights during a data access operation and during a data transfer. |
24 |
• Flashes at a one second rate when a disk is loaded. |
24 |
• Continues to flash if a disk or hardware error is detected. |
24 |
• Flashes at a three second rate while playing an audio disk. |
24 |
<TABLE ROW> |
24 |
Emergency Eject Hole |
24 |
Emergency Eject Hole |
24 |
Opens the Disk Tray when the end of a paper clip is inserted into it. Used when the workstation d... |
24 |
<TABLE ROW> |
24 |
Eject Button |
24 |
Opens the Disk Tray so that a CD ROM disk may be inserted in it or removed from it. When the driv... |
24 |
Opens the Disk Tray so that a CD ROM disk may be inserted in it or removed from it. When the driv... |
24 |
<TABLE ROW> |
24 |
Disk Tray |
24 |
Holds the CD ROM disk. (Note that this style of CD ROM drive does not use a disk caddy.) |
24 |
Holds the CD ROM disk. (Note that this style of CD ROM drive does not use a disk caddy.) |
24 |
Rear Panel Components |
25 |
Rear Panel Components |
25 |
This section describes the following components on the system unit’s rear panel. Figure 1-5 shows... |
25 |
• Power cord connector |
25 |
• Power cord connector |
25 |
• Transfer of Control (TOC) Button |
25 |
• Audio connectors |
25 |
• Two serial ports |
25 |
• 802.3 Twisted Pair (TP) LAN connector |
25 |
• Two USB connectors |
25 |
• Single-Ended/Low-Voltage Differential (SE/LVD) SCSI connector |
25 |
NOTE To maintain FCC/EMI compliance, verify that all cables are fully seated and properly fastened. |
25 |
NOTE To maintain FCC/EMI compliance, verify that all cables are fully seated and properly fastened. |
25 |
Figure15. System Unit Rear Panel Connectors |
25 |
Figure15. System Unit Rear Panel Connectors |
25 |
<GRAPHIC> |
26 |
Connectors on the Rear Panel |
26 |
Power Cord Connector |
26 |
Power Cord Connector |
26 |
Plug the power cord into the power cord connector to provide AC power to the workstation. The J67... |
26 |
RS-232C Serial Connectors |
26 |
RS-232C Serial Connectors |
26 |
You can attach a variety of pointing devices (such as a mouse or trackball) or peripheral devices... |
26 |
LAN 10/100 BaseT RJ45 Connector |
26 |
LAN 10/100 BaseT RJ45 Connector |
26 |
Your workstation has a built-in Twisted Pair (TP) connector for the 802.3 (ETHERNET) or 10 BaseT/... |
26 |
USB Connectors |
26 |
USB Connectors |
26 |
The two Universal Serial Bus (USB) connectors support only the HP keyboard, mouse, or hub (D6804A... |
26 |
The USB mouse and keyboard were shipped with your system unit. The HP hub can be ordered separate... |
26 |
For more information on the Universal Serial Bus, use your browser to access the following URL: ... |
26 |
HP Hub for USB Devices |
26 |
HP Hub for USB Devices |
26 |
The HP USB hub provides you with the ability to connect more than two USB devices to the workstat... |
26 |
SCSI Connectors |
27 |
SCSI Connectors |
27 |
There is one Single-Ended/Low-voltage Differential (SE/LVD) SCSI connector on the rear panel.Thi... |
27 |
Consult the documentation that accompanies each SCSI device for specific information concerning i... |
27 |
CAUTION Do |
27 |
CAUTION Do |
27 |
Audio Connectors |
27 |
Audio Connectors |
27 |
Your workstation has audio input and output capability through external input and output connecto... |
27 |
Figure16. Audio Connectors |
27 |
Figure16. Audio Connectors |
27 |
<GRAPHIC> |
27 |
<TABLE> |
27 |
<TABLE> |
27 |
Table14. Audio Electrical Specifications |
27 |
<TABLE BODY> |
27 |
<TABLE ROW> |
27 |
Frequency Response |
27 |
Frequency Response |
27 |
25 Hz to 20 kHz |
27 |
<TABLE ROW> |
27 |
Input Sensitivity/Impedance: – Line in – Microphone |
27 |
2.0 Vpk/47 Kohm 22 mVpk/1 Kohm |
27 |
2.0 Vpk/47 Kohm 22 mVpk/1 Kohm |
27 |
<TABLE ROW> |
28 |
Maximum Output Level/Impedance: – Line out – Headphones – Speaker (internal) |
28 |
2.8 Vpp/47 Kohm 2.8 Vpp/50 ohm 5.9 Vpp/48 ohm |
28 |
<TABLE ROW> |
28 |
Output Impedance: – Line out – Headphones |
28 |
619 ohm 118 ohm |
28 |
Internal Components |
29 |
Internal Components |
29 |
This section describes the internal components of the J6700 workstations. |
29 |
For instructions on how to remove the workstation’s top panel in order to access the PCI cage, me... |
29 |
Figure17. Internal Components of the J6700 |
29 |
Figure17. Internal Components of the J6700 |
29 |
<GRAPHIC> |
29 |
The system board in the J6700 contains the PA-RISC microprocessors, memory slots, and PCI cage as... |
29 |
Microprocessors |
30 |
The J6700 has two PA-8700 microprocessors with operating frequencies of 750 MHz. Each processor h... |
30 |
Power Supply |
30 |
The power system is comprised of one apparent power factor 500W output power supply. The maximum ... |
30 |
CAUTION HP does not recommend and does not support the use of “ferro-active” or “ferro-resonant” ... |
30 |
CAUTION HP does not recommend and does not support the use of “ferro-active” or “ferro-resonant” ... |
30 |
PCI Cage |
30 |
The PCI (Peripheral Connect Interface) cage is located on the left side of the system board, behi... |
30 |
CD ROM and Hard Disk Drive Bays |
30 |
The J6700 supports two Low-Voltage Differential (LVD) SCSI hard disk drives (one standard and one... |
30 |
The hard disk drives are hot-pluggable. More information on this was provided earlier in this cha... |
30 |
Voltage Regulator Modules (VRMs) |
30 |
NOTE These VRMs are designed to function ONLY with the J6700 power supply. The output is 2VDC. Th... |
30 |
NOTE These VRMs are designed to function ONLY with the J6700 power supply. The output is 2VDC. Th... |
30 |
Monitors |
31 |
Monitors |
31 |
The J6700 workstations currently support the following HP monitors: |
31 |
• 19-inch (18.3-inch viewable) VGA 1600¥1200 color monitor (Product Number A4575A) |
31 |
• 19-inch (18.3-inch viewable) VGA 1600¥1200 color monitor (Product Number A4575A) |
31 |
• 21-inch (19.9-inch viewable) VGA 1600¥1200 color monitor (Product Number A4576A) |
31 |
• 18.1-inch L1800 color flat panel display VGA up to 1280¥1024 (Product Number D5065W) |
31 |
• 19-inch (18-inch viewable) display VGA 1600x1200 (Product Number D8910W) |
31 |
• 21-inch (19.8-inch viewable) display VGA 1800x1440 (Product Number D2847A) |
31 |
• 24-inch (22.5-inch viewable) display VGA 1920x1200 (Product Number A1295A) |
31 |
Keyboard |
31 |
Keyboard |
31 |
The standard USB keyboard (Product Number A4983-604 |
31 |
Mouse |
31 |
Mouse |
31 |
The USB mouse is either a scroll wheel type mouse (Product Number A4983-60101) where the scroll w... |
31 |
Site Preparation and Installation |
31 |
Site Preparation and Installation |
31 |
For information on: |
31 |
• Preparing customers’ sites for the delivery and installation of J6700 workstations, refer to th... |
31 |
• Preparing customers’ sites for the delivery and installation of J6700 workstations, refer to th... |
31 |
• Preparing customers’ sites for the delivery and installation of J6700 workstations, refer to th... |
31 |
• Installing J6700 workstations, refer to the QuikInstall Poster which came with the workstation ... |
31 |
For a listing of documentation for the J6700 workstations, see Appendix D. |
31 |
2 Troubleshooting |
33 |
2 Troubleshooting |
33 |
This chapter provides information about isolating a failing component, known as a Field Replaceab... |
33 |
This chapter provides information about isolating a failing component, known as a Field Replaceab... |
33 |
Chapter Overview |
34 |
Chapter Overview |
34 |
This chapter contains the following main sections: |
34 |
Introduction to Troubleshooting |
34 |
Introduction to Troubleshooting |
34 |
To troubleshoot HP VISUALIZE J6700 workstations, you must be familiar with the HP-UX operating sy... |
34 |
First note any error or status messages, and then run the power-up boot ROM diagnostics, known as... |
34 |
For a complete description of using ISL diagnostics and using the Support Tools Manager, see the ... |
34 |
Flowcharts for Troubleshooting |
34 |
Flowcharts for Troubleshooting |
34 |
The following four figures contain troubleshooting flowcharts you can follow to isolate a failing... |
34 |
Figure21. Main Flowchart for Troubleshooting |
35 |
Figure21. Main Flowchart for Troubleshooting |
35 |
<GRAPHIC> |
36 |
Figure22. Console Troubleshooting Flowchart |
36 |
<GRAPHIC> |
37 |
Figure23. Bootable Device Troubleshooting Flowchart |
37 |
<GRAPHIC> |
38 |
Figure24. HP-UX Troubleshooting Flowchart |
38 |
<GRAPHIC> |
39 |
Dealing with a Boot Failure |
39 |
This section contains information for searching for bootable media, stable storage, boot command ... |
39 |
Special Considerations |
39 |
Special Considerations |
39 |
When dealing with boot failures, you will need to consider the scenarios in this section. |
39 |
• To boot from a known device containing a bootable operating system, type the following at the p... |
39 |
• To boot from a known device containing a bootable operating system, type the following at the p... |
39 |
• To interact with the Initial System Loader (ISL) before booting the workstation, type the follo... |
39 |
• To find the location of the bootable operating systems on the various media in the file system,... |
39 |
J5000/J7000 workstation:bootable media |
40 |
J5000/J7000 workstation:bootable media |
40 |
J5000/J7000 workstation:bootable media |
40 |
Troubleshooting:bootable media |
40 |
Bootable media |
40 |
To list all devices that contain bootable media, go to the Main Menu of the Boot Console Handler,... |
40 |
Main Menu: Enter command > search ipl [Enter] |
40 |
The |
40 |
• To temporarily suspend the search, press |
40 |
• To temporarily suspend the search, press |
40 |
• To continue the search, press |
40 |
• To halt the search, press any other key. |
40 |
These flow-control commands do not work with a bitmapped display, but such a display can show mor... |
40 |
To search for devices of just one type that actually contain bootable media, go to the Main Menu ... |
40 |
Main Menu: Enter command > search ipl device_type [Enter] |
40 |
where |
40 |
Troubleshooting:stable storage |
40 |
Troubleshooting:stable storage |
40 |
Troubleshooting:stable storage |
40 |
J5000/J7000 workstation:stable storage |
40 |
Stable storage |
40 |
Stable Storage is non-volatile memory associated with the PA-RISC processor module. Stable Storag... |
40 |
J5000/J7000 workstation:boot command notations |
40 |
J5000/J7000 workstation:boot command notations |
40 |
J5000/J7000 workstation:boot command notations |
40 |
Troubleshooting:boot command notations |
40 |
Boot:command notations |
40 |
The |
40 |
• Mnemonic |
40 |
• Mnemonic |
40 |
• Path number |
40 |
Type |
40 |
Here are examples of mnemonic notation: |
40 |
• boot |
40 |
• boot |
40 |
• boot |
40 |
• boot |
40 |
• boot |
40 |
Here is an example of path number notation: |
41 |
• boot p1 [Enter] |
41 |
• boot p1 [Enter] |
41 |
• boot p1 [Enter] |
41 |
J5000/J7000 workstation:boot paths supported |
41 |
J5000/J7000 workstation:boot paths supported |
41 |
J5000/J7000 workstation:boot paths supported |
41 |
Troubleshooting:boot paths |
41 |
Boot:paths supported |
41 |
SCSI devices are bootable when connected to any SCSI port on the system. Workstations can only bo... |
41 |
J5000/J7000 workstation:ISL environment |
41 |
J5000/J7000 workstation:ISL environment |
41 |
J5000/J7000 workstation:ISL environment |
41 |
Troubleshooting:ISL environment |
41 |
ISL environment |
41 |
The ISL environment provides the means to load the operating system (HP-UX) environment. The ISL ... |
41 |
The ISL program is the first program loaded into main memory from an external media (LAN, disk, o... |
41 |
The ISL environment provides the following capabilities: |
41 |
• Execute user-entered commands to modify boot device paths and boot options in stable storage. |
41 |
• Execute user-entered commands to modify boot device paths and boot options in stable storage. |
41 |
• Run off-line diagnostic programs and utilities. |
41 |
• Provide automatic booting of the HP-UX operating system after power-on or reset. |
41 |
Identifying LCD-Indicated Conditions |
42 |
Identifying LCD-Indicated Conditions |
42 |
This workstation uses a 2-line LCD, with up to 16-characters per line, to display firmware/operat... |
42 |
XXX YYYY: ZZZZZZ(Line 1) |
42 |
XXX YYYY: ZZZZZZ(Line 1) |
42 |
XXX YYYY: ZZZZZZ(Line 1) |
42 |
AAAAAAAAAAAAAAAA(Line 2) |
42 |
Where: |
42 |
<TABLE> |
42 |
<TABLE BODY> |
42 |
<TABLE ROW> |
42 |
XXX |
42 |
XXX |
42 |
Three-character Operating Status |
42 |
<TABLE ROW> |
42 |
YYYY |
42 |
YYYY |
42 |
Four-digit hex code identifying the code module being executed |
42 |
<TABLE ROW> |
42 |
ZZZZZZ |
42 |
ZZZZZZ |
42 |
Six-digit FRU descriptor |
42 |
<TABLE ROW> |
42 |
AAAAAAAAAAAAAAAA |
42 |
AAAAAAAAAAAAAAAA |
42 |
Diagnostic message of up to 16 characters |
42 |
The 3-character operating status can be one of the following: |
42 |
<TABLE> |
42 |
<TABLE BODY> |
42 |
<TABLE ROW> |
42 |
FLT (fault) |
42 |
FLT |
42 |
A hardware error has been detected |
42 |
<TABLE ROW> |
42 |
TST (test) |
42 |
TST |
42 |
Hardware being tested |
42 |
<TABLE ROW> |
42 |
INI (initialize) |
42 |
INI |
42 |
Hardware being initialized |
42 |
<TABLE ROW> |
42 |
SHU (shutdown) |
42 |
SHU |
42 |
System being shutdown |
42 |
<TABLE ROW> |
42 |
WRN (warning) |
42 |
WRN |
42 |
A non-optimal operating condition exists |
42 |
<TABLE ROW> |
42 |
RUN (running) |
42 |
RUN |
42 |
The operating system is running |
42 |
Selftest Failures |
42 |
Selftest Failures |
42 |
Chassis codes are the key to debugging selftest errors. If a failure is found during selftest, ch... |
42 |
1. In Table 3-1 starting on the next page, find the chassis code listed on the LCD. |
42 |
1. In Table 3-1 starting on the next page, find the chassis code listed on the LCD. |
42 |
2. In the Boot Console Handler, use the Service Menu’s |
42 |
The FRU column in Table 3-1 shows messages printed on the LCD that refer to system FRUs. All code... |
42 |
Memory Failures |
43 |
Memory Failures |
43 |
The J6700 workstations require special Memory Page Deallocation to be implemented. This feature a... |
43 |
HP-UX uses this information to map out failing memory areas and continue normal operation. You ca... |
43 |
Chassis Codes |
44 |
Chassis Codes |
44 |
Table 3-1 lists all of the chassis codes for the J6700 workstations. |
44 |
<TABLE> |
44 |
<TABLE> |
44 |
Table21. Chassis Codes for J6700 Workstations |
44 |
<TABLE HEADING> |
44 |
<TABLE ROW> |
44 |
Ostat |
44 |
Ostat |
44 |
Code |
44 |
Code |
44 |
FRU |
44 |
FRU |
44 |
Message |
44 |
Message |
44 |
Description |
44 |
Description |
44 |
<TABLE BODY> |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n01 |
44 |
1 |
44 |
SYS BD |
44 |
SYS BD |
44 |
HPMC occurred |
44 |
HPMC occurred |
44 |
CPU n detected an unexpected HPMC. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n02 |
44 |
SYS BD |
44 |
SYS BD |
44 |
powerfail intrpt |
44 |
powerfail intrpt |
44 |
CPU n detected an unexpected power fail interrupt. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n03 |
44 |
SYS BD |
44 |
SYS BD |
44 |
recvry cntr trap |
44 |
recvry cntr trap |
44 |
CPU n detected an unexpected recovery counter trap. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n04 |
44 |
SYS BD |
44 |
SYS BD |
44 |
external intrrpt |
44 |
external intrrpt |
44 |
CPU n detected an unexpected external interrupt. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n05 |
44 |
SYS BD |
44 |
SYS BD |
44 |
LPMC occurred |
44 |
LPMC occurred |
44 |
CPU n detected an unexpected LPMC. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n06 |
44 |
SYS BD |
44 |
SYS BD |
44 |
ITLB mis/Ipg flt |
44 |
ITLB mis/Ipg flt |
44 |
CPU n detected an unexpected ITLB miss or instruction page fault. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n07 |
44 |
SYS BD |
44 |
SYS BD |
44 |
I mem prot trap |
44 |
I mem prot trap |
44 |
CPU n detected an unexpected instruction memory protection trap. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
FLT |
44 |
1n08 |
44 |
1 |
44 |
SYS BD |
44 |
SYS BD |
44 |
illegal inst trp |
44 |
illegal inst trp |
44 |
CPU n detected an unexpected illegal instruction trap. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
FLT |
44 |
1n09 |
44 |
1 |
44 |
SYS BD |
44 |
SYS BD |
44 |
break instr trap |
44 |
break instr trap |
44 |
CPU n detected an unexpected break instruction trap. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
FLT |
44 |
1n0A |
44 |
1 |
44 |
SYS BD |
44 |
SYS BD |
44 |
privilgd op trap |
44 |
privilgd op trap |
44 |
CPU n detected an unexpected privileged operation trap. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
FLT |
44 |
1n0B |
44 |
1 |
44 |
SYS BD |
44 |
SYS BD |
44 |
privlgd reg trap |
44 |
privlgd reg trap |
44 |
CPU n detected an unexpected privileged register trap. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
FLT |
44 |
1n0C |
44 |
1 |
44 |
SYS BD |
44 |
SYS BD |
44 |
overflow trap |
44 |
overflow trap |
44 |
CPU n detected an unexpected overflow trap. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
FLT |
44 |
1n0D |
44 |
1 |
44 |
SYS BD |
44 |
SYS BD |
44 |
conditional trap |
44 |
conditional trap |
44 |
CPU n detected an unexpected conditional trap. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
FLT |
44 |
1n0E |
44 |
1 |
44 |
SYS BD |
44 |
SYS BD |
44 |
assist exep trap |
44 |
assist exep trap |
44 |
CPU n detected an unexpected assist exception trap. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n0F |
44 |
SYS BD |
44 |
SYS BD |
44 |
DTLB mis/Dpg flt |
44 |
DTLB mis/Dpg flt |
44 |
CPU n detected an unexpected DTLB miss or data page fault. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n10 |
44 |
SYS BD |
44 |
SYS BD |
44 |
non-acc ITLB mis |
44 |
non-acc ITLB mis |
44 |
CPU n detected an unexpected non-access ITLB miss fault. |
44 |
CPU |
44 |
<TABLE ROW> |
44 |
FLT |
44 |
1n11 |
44 |
SYS BD |
44 |
SYS BD |
44 |
non-acc DTLB mis |
44 |
non-acc DTLB mis |
44 |
CPU n detected an unexpected non-access DTLB miss or data page fault. |
44 |
CPU |
44 |
<TABLE ROW> |
45 |
FLT |
45 |
1n12 |
45 |
SYS BD |
45 |
SYS BD |
45 |
data mem prot tr |
45 |
data mem prot tr |
45 |
CPU n detected an unexpected data memory protection trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n13 |
45 |
SYS BD |
45 |
SYS BD |
45 |
data mem brk trp |
45 |
data mem brk trp |
45 |
CPU n detected an unexpected data memory break trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n14 |
45 |
SYS BD |
45 |
SYS BD |
45 |
TLB dirty bit tr |
45 |
TLB dirty bit tr |
45 |
CPU n detected an unexpected TLB dirty bit trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n15 |
45 |
SYS BD |
45 |
SYS BD |
45 |
page refrnce trp |
45 |
page refrnce trp |
45 |
CPU n detected an unexpected page reference trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n16 |
45 |
SYS BD |
45 |
SYS BD |
45 |
assist emul trap |
45 |
assist emul trap |
45 |
CPU n detected an unexpected assist emulation trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n17 |
45 |
SYS BD |
45 |
SYS BD |
45 |
hi-priv xfer trp |
45 |
hi-priv xfer trp |
45 |
CPU n detected an unexpected higher-privilege transfer trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n18 |
45 |
SYS BD |
45 |
SYS BD |
45 |
lo-priv xfer trp |
45 |
lo-priv xfer trp |
45 |
CPU n detected an unexpected lower-privilege transfer trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n19 |
45 |
SYS BD |
45 |
SYS BD |
45 |
taken branch trp |
45 |
taken branch trp |
45 |
CPU n detected an unexpected taken-branch trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n1A |
45 |
SYS BD |
45 |
SYS BD |
45 |
data mem acc rts |
45 |
data mem acc rts |
45 |
CPU n detected an unexpected data memory access rights trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n1B |
45 |
SYS BD |
45 |
SYS BD |
45 |
data mem prot ID |
45 |
data mem prot ID |
45 |
CPU n detected an unexpected data memory protection ID trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n1C |
45 |
SYS BD |
45 |
SYS BD |
45 |
unalign data ref |
45 |
unalign data ref |
45 |
CPU n detected an unexpected unaligned data reference trap. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
FLT |
45 |
1n1D |
45 |
SYS BD |
45 |
SYS BD |
45 |
perf mon intrrpt |
45 |
perf mon intrrpt |
45 |
CPU n detected an unexpected performance monitor interrupt. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
TST |
45 |
1n20 |
45 |
1 |
45 |
SYS BD |
45 |
SYS BD |
45 |
CPUn basic test |
45 |
CPU |
45 |
CPU n is starting its basic operations self-test. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
TST |
45 |
TST |
45 |
1n21 |
45 |
1 |
45 |
SYS BD |
45 |
SYS BD |
45 |
CPUn alu test |
45 |
CPU |
45 |
CPU n is starting its arithmetic and logical unit self-test. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
TST |
45 |
TST |
45 |
1n22 |
45 |
1 |
45 |
SYS BD |
45 |
SYS BD |
45 |
CPUn branch test |
45 |
CPU |
45 |
CPU n is starting its branch instruction self-test. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
TST |
45 |
1n23 |
45 |
1 |
45 |
SYS BD |
45 |
SYS BD |
45 |
CPUn arith cond |
45 |
CPU |
45 |
CPU n is starting its arithmetic condition self-test. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
TST |
45 |
TST |
45 |
1n24 |
45 |
1 |
45 |
SYS BD |
45 |
SYS BD |
45 |
CPUn bit opers |
45 |
CPU |
45 |
CPU n is starting its bit operation instruction self-test. |
45 |
CPU |
45 |
<TABLE ROW> |
45 |
TST |
45 |
1n25 |
45 |
1 |
45 |
SYS BD |
45 |
SYS BD |
45 |
CPUn cntrl regs |
45 |
CPU |
45 |
CPU n is starting its control register self-test. |
45 |
CPU |
45 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1n26 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn ext intrpt |
46 |
CPU |
46 |
CPU n is starting its external interrupt self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
1n27 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn itimer test |
46 |
CPU |
46 |
CPU n is starting its interval timer self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
1n28 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn multi-media |
46 |
CPU |
46 |
CPU n is starting its multi-media instructions self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1n29 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn shadow reg |
46 |
CPU |
46 |
CPU n is starting its shadow register self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1n2A |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn diagnse reg |
46 |
CPU |
46 |
CPU n is starting its diagnose register self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1n2B |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn rdr test |
46 |
CPU |
46 |
CPU n is starting its remote diagnose register self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1n2C |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn bypass test |
46 |
CPU |
46 |
CPU n is starting its integer bypass operation self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
1n30 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn start est |
46 |
CPU |
46 |
CPU n is starting its early (pre-memory) self-tests. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
WRN |
46 |
WRN |
46 |
1n31 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn skip est |
46 |
CPU n is bypassing its early self-tests to save time. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
FLT |
46 |
FLT |
46 |
1n32 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn bad tst mod |
46 |
CPU |
46 |
CPU n detected an unsupported system mode. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
INI |
46 |
INI |
46 |
1n3C |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn initialize |
46 |
CPU |
46 |
CPU n is initializing after self-tests. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1n3E |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn exit est |
46 |
CPU n finished its early self-tests. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1nA0 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn fpu tests |
46 |
CPU |
46 |
CPU n is starting its floating-point unit self-tests. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1nA1 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn fpu reg tst |
46 |
CPU |
46 |
CPU n is starting its floating-point register self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
1nA2 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn fpu inst |
46 |
CPU |
46 |
CPU n is starting its floating-point instruction self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1nA3 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn fpu traps |
46 |
CPU |
46 |
CPU n is starting its floating-point trap self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1nA4 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn fpu misc |
46 |
CPU |
46 |
CPU n is starting its floating-point miscellaneous operations self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1nA5 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn fpu bypass |
46 |
CPU |
46 |
CPU n is starting its floating-point bypassing self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
46 |
TST |
46 |
TST |
46 |
1nB1 |
46 |
1 |
46 |
SYS BD |
46 |
SYS BD |
46 |
CPUn TLB RAM tst |
46 |
CPU |
46 |
CPU n is starting its TLB register self-test. |
46 |
CPU |
46 |
<TABLE ROW> |
47 |
TST |
47 |
TST |
47 |
1nB2 |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn TLB trans |
47 |
CPU |
47 |
CPU n is starting its TLB translation self-test. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
FLT |
47 |
FLT |
47 |
1nBA |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
monarch CPU fail |
47 |
monarch CPU |
47 |
The monarch CPU failed. |
47 |
The monarch CPU failed. |
47 |
<TABLE ROW> |
47 |
FLT |
47 |
FLT |
47 |
1nBB |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
bad CPUn number |
47 |
bad CPU |
47 |
The CPU identifier was out of range. |
47 |
The CPU identifier was out of range. |
47 |
<TABLE ROW> |
47 |
FLT |
47 |
FLT |
47 |
1nBF |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn halt boot |
47 |
CPU |
47 |
Bootstrap failure--machine halted. |
47 |
Bootstrap failure--machine halted. |
47 |
<TABLE ROW> |
47 |
INI |
47 |
INI |
47 |
1nCA |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn sys bus arb |
47 |
CPUn sys bus arb |
47 |
Monarch CPU is initializing the system bus arbitration. |
47 |
Monarch CPU is initializing the system bus arbitration. |
47 |
<TABLE ROW> |
47 |
WRN |
47 |
WRN |
47 |
1nCD |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn deconfig |
47 |
CPU |
47 |
CPU n deconfigured itself. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
WRN |
47 |
WRN |
47 |
1nCE |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn extinguish |
47 |
CPU |
47 |
PDC_PROC halted CPU n. |
47 |
PDC_PROC halted CPU |
47 |
<TABLE ROW> |
47 |
FLT |
47 |
FLT |
47 |
1nCF |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
slaven failed |
47 |
slave |
47 |
Slave CPU n failed self-test. |
47 |
Slave CPU |
47 |
<TABLE ROW> |
47 |
WRN |
47 |
WRN |
47 |
1mDs |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
slaves deconfig |
47 |
slaves deconfig |
47 |
Monarch CPU m deconfigured slave CPU s. |
47 |
Monarch CPU |
47 |
<TABLE ROW> |
47 |
WRN |
47 |
WRN |
47 |
1nEF |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn slftst warn |
47 |
CPU |
47 |
CPU n detected a non-fatal error during its self-tests. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
WRN |
47 |
WRN |
47 |
1mFs |
47 |
1 |
47 |
SYS BD |
47 |
SYS BD |
47 |
monm stop slaves |
47 |
mon |
47 |
Monarch CPU m halted slave CPU s. |
47 |
Monarch CPU |
47 |
<TABLE ROW> |
47 |
INI |
47 |
INI |
47 |
1nFC |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn sync’ing |
47 |
CPUn sync’ing |
47 |
CPU n is synchronizing with the rest of the system. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
INI |
47 |
INI |
47 |
1nFD |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn stat wd tst |
47 |
CPU |
47 |
CPU n is testing the system status word. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
FLT |
47 |
FLT |
47 |
1nFF |
47 |
SYS BD |
47 |
SYS BD |
47 |
monarchn selftst |
47 |
monarch |
47 |
Monarch CPU n failed self-test. |
47 |
Monarch CPU |
47 |
<TABLE ROW> |
47 |
TST |
47 |
TST |
47 |
2n20 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn icache RAM |
47 |
CPU |
47 |
CPU n is starting its instruction cache RAM self-test. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
FLT |
47 |
FLT |
47 |
2n25 |
47 |
2 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn ic ld d err |
47 |
CPU |
47 |
CPU n detected a data error during data cache load. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
FLT |
47 |
FLT |
47 |
2n26 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn ic ld t err |
47 |
CPU |
47 |
CPU n detected a tag error during data cache load. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
TST |
47 |
TST |
47 |
2n30 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn icache tag |
47 |
CPU |
47 |
CPU n is starting its instruction cache tag self-test. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
TST |
47 |
TST |
47 |
2n40 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn icache par |
47 |
CPU |
47 |
CPU n is starting its instruction cache parity detection self-test. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
TST |
47 |
TST |
47 |
2n50 |
47 |
2 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn dc stor que |
47 |
CPU |
47 |
CPU n is starting its data cache store queue self-test. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
FLT |
47 |
FLT |
47 |
2n51 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn dc st q err |
47 |
CPU |
47 |
CPU n detected an error during its data cache store queue self-test. |
47 |
CPU |
47 |
<TABLE ROW> |
47 |
TST |
47 |
TST |
47 |
2n70 |
47 |
SYS BD |
47 |
SYS BD |
47 |
CPUn dcache RAM |
47 |
CPU |
47 |
CPU n is starting its data cache RAM self-test. |
47 |
CPU |
47 |
<TABLE ROW> |
48 |
TST |
48 |
TST |
48 |
2n80 |
48 |
SYS BD |
48 |
SYS BD |
48 |
CPUn dcache tag |
48 |
CPU |
48 |
CPU n is starting its data cache tag self-test. |
48 |
CPU |
48 |
<TABLE ROW> |
48 |
TST |
48 |
TST |
48 |
2n90 |
48 |
SYS BD |
48 |
CPUn dcache ECC |
48 |
CPU |
48 |
CPU n is starting its data cache ECC self-test. |
48 |
CPU |
48 |
<TABLE ROW> |
48 |
FLT |
48 |
FLT |
48 |
2BAD |
48 |
SYS BD |
48 |
SYS BD |
48 |
assertion fail |
48 |
assertion fail |
48 |
A firmware assertion failed. |
48 |
A firmware assertion failed. |
48 |
<TABLE ROW> |
48 |
TST |
48 |
TST |
48 |
3n00 |
48 |
SYS BD |
48 |
SYS BD |
48 |
ROM checksum tst |
48 |
ROM checksum tst |
48 |
Monarch CPU n is testing the boot ROM integrity. |
48 |
Monarch CPU |
48 |
<TABLE ROW> |
48 |
FLT |
48 |
FLT |
48 |
3n00 |
48 |
SYS BD |
48 |
SYS BD |
48 |
ROM checksum BAD |
48 |
ROM checksum BAD |
48 |
The boot ROM failed checksum. |
48 |
The boot ROM failed checksum. |
48 |
<TABLE ROW> |
48 |
INI |
48 |
INI |
48 |
3n00 |
48 |
SYS BD |
48 |
SYS BD |
48 |
ROM checksum ok |
48 |
ROM checksum ok |
48 |
The boot ROM passed checksum. |
48 |
The boot ROM passed checksum. |
48 |
<TABLE ROW> |
48 |
TST |
48 |
TST |
48 |
3n01 |
48 |
SYS BD |
48 |
SYS BD |
48 |
PDH control test |
48 |
PDH control test |
48 |
Monarch CPU n is testing PDH control register. |
48 |
Monarch CPU |
48 |
<TABLE ROW> |
48 |
INI |
48 |
INI |
48 |
3n01 |
48 |
SYS BD |
48 |
SYS BD |
48 |
PDH control init |
48 |
PDH control init |
48 |
Monarch CPU n is initializing the PDH control register. |
48 |
Monarch CPU |
48 |
<TABLE ROW> |
48 |
FLT |
48 |
FLT |
48 |
3n01 |
48 |
SYS BD |
48 |
SYS BD |
48 |
PDH control err |
48 |
PDH control err |
48 |
Monarch CPU n detected an error in the PDH control register. |
48 |
Monarch CPU |
48 |
<TABLE ROW> |
48 |
TST |
48 |
TST |
48 |
3n02 |
48 |
SYS BD |
48 |
SYS BD |
48 |
scratch RAM test |
48 |
scratch RAM test |
48 |
Monarch CPU n is testing scratch RAM. |
48 |
Monarch CPU |
48 |
<TABLE ROW> |
48 |
INI |
48 |
INI |
48 |
3n02 |
48 |
SYS BD |
48 |
SYS BD |
48 |
scratch RAM ok |
48 |
scratch RAM ok |
48 |
The scratch RAM test failed. |
48 |
<TABLE ROW> |
48 |
FLT |
48 |
FLT |
48 |
3n02 |
48 |
SYS BD |
48 |
SYS BD |
48 |
scratch RAM bad |
48 |
scratch RAM bad |
48 |
The scratch RAM test passed. |
48 |
<TABLE ROW> |
48 |
WRN |
48 |
WRN |
48 |
3n03 |
48 |
SYS BD |
48 |
SYS BD |
48 |
stbl st read err |
48 |
stbl st read err |
48 |
CPU n detected a non-fatal error reading the stable store. |
48 |
<TABLE ROW> |
48 |
FLT |
48 |
3n03 |
48 |
SYS BD |
48 |
SYS BD |
48 |
stbl st read err |
48 |
stbl st read err |
48 |
CPU n detected a non-fatal error reading the stable store. |
48 |
<TABLE ROW> |
48 |
INI |
48 |
3nC4 |
48 |
SYS BD |
48 |
SYS BD |
48 |
clearing EEPROM |
48 |
clearing EEPROM |
48 |
Monarch CPU n is clearing the EEPROM. |
48 |
Monarch CPU |
48 |
<TABLE ROW> |
48 |
INI |
48 |
3nD4 |
48 |
SYS BD |
48 |
SYS BD |
48 |
deflting EEPROM2 |
48 |
deflting EEPROM2 |
48 |
Monarch CPU n is initializing the EEPROM to system defaults. |
48 |
Monarch CPU |
48 |
<TABLE ROW> |
48 |
WRN |
48 |
3n04 |
48 |
SYS BD |
48 |
SYS BD |
48 |
EEPROM write err |
48 |
EEPROM write err |
48 |
CPU n detected a non-fatal error writing the EEPROM. |
48 |
<TABLE ROW> |
48 |
FLT |
48 |
FLT |
48 |
3n04 |
48 |
SYS BD |
48 |
SYS BD |
48 |
EEPROM write err |
48 |
EEPROM write err |
48 |
CPU n detected a fatal error writing the EEPROM. |
48 |
CPU |
48 |
<TABLE ROW> |
48 |
FLT |
48 |
FLT |
48 |
3n05 |
48 |
SYS BD |
48 |
SYS BD |
48 |
EEPROM wrt limit |
48 |
EEPROM wrt limit |
48 |
CPU n detected a fatal error writing the EEPROM. |
48 |
CPU |
48 |
<TABLE ROW> |
48 |
WRN |
48 |
WRN |
48 |
3n06 |
48 |
SYS BD |
48 |
SYS BD |
48 |
EEPROM read err |
48 |
EEPROM read err |
48 |
CPU n detected a non-fatal error reading the EEPROM. |
48 |
CPU |
48 |
<TABLE ROW> |
48 |
FLT |
48 |
3n06 |
48 |
SYS BD |
48 |
SYS BD |
48 |
EEPROM read err |
48 |
EEPROM read err |
48 |
CPU n detected a fatal error reading the EEPROM. |
48 |
CPU |
48 |
<TABLE ROW> |
49 |
INI |
49 |
3n07 |
49 |
SYS BD |
49 |
SYS BD |
49 |
CPUn invoke LDB |
49 |
CPU |
49 |
CPU n is starting the low-level debugger. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
FLT |
49 |
3n09 |
49 |
SYS BD |
49 |
SYS BD |
49 |
bad sys mde byte |
49 |
bad sys mde byte |
49 |
CPU n detected an unsupported system mode. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
WRN |
49 |
3n1A |
49 |
SYS BD |
49 |
SYS BD |
49 |
hversion mismtch |
49 |
hversion mismtch |
49 |
Stable store hardware version doesn’t match system. |
49 |
Stable store hardware version doesn’t match system. |
49 |
<TABLE ROW> |
49 |
TST |
49 |
3n1B |
49 |
SYS BD |
49 |
SYS BD |
49 |
chck model strng |
49 |
chck model strng |
49 |
Check model string with version in stable store. |
49 |
Check model string with version in stable store. |
49 |
<TABLE ROW> |
49 |
WRN |
49 |
3n1B |
49 |
SYS BD |
49 |
SYS BD |
49 |
model str msmtch |
49 |
model str msmtch |
49 |
Model string doesn’t match that in stable store. |
49 |
Model string doesn’t match that in stable store. |
49 |
<TABLE ROW> |
49 |
FLT |
49 |
3n1B |
49 |
SYS BD |
49 |
SYS BD |
49 |
fatal model str |
49 |
fatal model str |
49 |
Error reading model string from stable store. |
49 |
Error reading model string from stable store. |
49 |
<TABLE ROW> |
49 |
TST |
49 |
3n1C |
49 |
SYS BD |
49 |
SYS BD |
49 |
test software ID |
49 |
test software ID |
49 |
Check LANIC address. |
49 |
Check LANIC address. |
49 |
<TABLE ROW> |
49 |
WRN |
49 |
3n1C |
49 |
SYS BD |
49 |
SYS BD |
49 |
update sw ID |
49 |
update sw ID |
49 |
Update LANIC address. |
49 |
Update LANIC address. |
49 |
<TABLE ROW> |
49 |
FLT |
49 |
3n1C |
49 |
SYS BD |
49 |
SYS BD |
49 |
update sw ID err |
49 |
update sw ID err |
49 |
Error updating LANIC address. |
49 |
Error updating LANIC address. |
49 |
<TABLE ROW> |
49 |
INI |
49 |
3n2s |
49 |
SYS BD |
49 |
SYS BD |
49 |
Invoke LDB: s |
49 |
Invoke LDB: |
49 |
CPU n is awaiting the low-level debugger for s more seconds. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
TST |
49 |
3nBC |
49 |
IO BD |
49 |
test sys clocks |
49 |
test sys clocks |
49 |
CPU n is verifying processor clocks with the real-time clock. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
INI |
49 |
3nBC |
49 |
SYS BD |
49 |
SYS BD |
49 |
init sys clocks |
49 |
init sys clocks |
49 |
CPU n has initialized the processor clocks. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
FLT |
49 |
FLT |
49 |
3nBC |
49 |
3 |
49 |
IO BD |
49 |
IO BD |
49 |
RTC tick timeout |
49 |
RTC tick timeout |
49 |
The real-time clock is ticking too slowly or not at all. |
49 |
The real-time clock is ticking too slowly or not at all. |
49 |
<TABLE ROW> |
49 |
TST |
49 |
3nCD |
49 |
SYS BD |
49 |
SYS BD |
49 |
check defaults |
49 |
check defaults |
49 |
CPU n is initializing stable store values to system defaults. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
INI |
49 |
3nCD |
49 |
SYS BD |
49 |
SYS BD |
49 |
init defaults |
49 |
init defaults |
49 |
CPU n finished initializing stable store values. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
FLT |
49 |
3nCD |
49 |
SYS BD |
49 |
SYS BD |
49 |
init EEPROM err |
49 |
init EEPROM err |
49 |
CPU n detected an error writing to stable store. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
FLT |
49 |
3nEC |
49 |
SYS BD |
49 |
SYS BD |
49 |
bad sys config |
49 |
bad sys config |
49 |
CPU n detected an illegal CPU board configuration. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
FLT |
49 |
3nF4 |
49 |
SYS BD |
49 |
SYS BD |
49 |
EEPROM boot limt |
49 |
EEPROM boot limt |
49 |
CPU n detected a fatal error writing the EEPROM. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
FLT |
49 |
3nFC |
49 |
SYS BD |
49 |
SYS BD |
49 |
bad sys bd id |
49 |
bad sys bd id |
49 |
CPU n cannot identify CPU board. |
49 |
CPU |
49 |
<TABLE ROW> |
49 |
TST |
49 |
4n00 |
49 |
SYS BD |
49 |
SYS BD |
49 |
CPUn start lst |
49 |
CPU |
49 |
CPU n is starting its late (with memory) self-tests. |
49 |
CPU |
49 |
<TABLE ROW> |
50 |
WRN |
50 |
4n01 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn skip lst |
50 |
CPU |
50 |
CPU n is bypassing its late self-tests to save time. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n0E |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn exit lst |
50 |
CPU |
50 |
CPU n finished its late self-tests. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n20 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst erly st |
50 |
CPU |
50 |
CPU n is re-executing some of its early self-tests from system memory. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n21 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst basic |
50 |
CPU |
50 |
CPU n is re-executing its basic operations self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n22 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst alu |
50 |
CPU |
50 |
CPU n is re-executing its arithmetic and logic unit self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n23 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst branch |
50 |
CPU |
50 |
CPU n is re-executing its branch instruction self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n24 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst arth cd |
50 |
CPU |
50 |
CPU n is re-executing its arithmetic conditions self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n25 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst bit ops |
50 |
CPU |
50 |
CPU n is re-executing its bit operations self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n26 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst ctl reg |
50 |
CPU |
50 |
CPU n is re-executing its control register self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n27 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst ext int |
50 |
CPU |
50 |
CPU n is re-executing its external interrupt self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n28 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst itimer |
50 |
CPU |
50 |
CPU n is re-executing its interval timer self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n29 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst mltimed |
50 |
CPU |
50 |
CPU n is re-executing its multi-media instructions self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n2A |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst shadow |
50 |
CPU |
50 |
CPU n is re-executing its shadow register self-test. |
50 |
CPU n is re-executing its shadow register self-test. |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n2B |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst dg regs |
50 |
CPU |
50 |
CPU n is re-executing its diagnose register self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n2C |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst rdrs |
50 |
CPU |
50 |
CPU n is re-executing its remote diagnose register self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n2D |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn lst bypass |
50 |
CPU |
50 |
CPU n is re-executing its integer bypass operation self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n30 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn cache byte |
50 |
CPU |
50 |
CPU n is starting its data cache sub-word operations self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n40 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn cache flush |
50 |
CPU |
50 |
CPU n is starting its cache flush self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
50 |
TST |
50 |
4n50 |
50 |
SYS BD |
50 |
SYS BD |
50 |
CPUn icache miss |
50 |
CPU |
50 |
CPU n is starting its instruction cache miss self-test. |
50 |
CPU |
50 |
<TABLE ROW> |
51 |
TST |
51 |
4n60 |
51 |
SYS BD |
51 |
SYS BD |
51 |
CPUn dcache miss |
51 |
CPU |
51 |
CPU n is starting its data cache miss self-test. |
51 |
CPU |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
5n00 |
51 |
SYS BD |
51 |
SYS BD |
51 |
unknown bus err |
51 |
unknown bus err |
51 |
CPU n detected an unknown error on the system bus (Runway). |
51 |
CPU |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
5n02 |
51 |
SYS BD |
51 |
SYS BD |
51 |
path err assertd |
51 |
path err assertd |
51 |
CPU n detected a path error on the system bus (Runway). |
51 |
CPU |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
5n04 |
51 |
SYS BD |
51 |
SYS BD |
51 |
data parity err |
51 |
data parity err |
51 |
CPU n detected a data, address, or control parity error on the system bus (Runway). |
51 |
CPU |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
5n07 |
51 |
SYS BD |
51 |
SYS BD |
51 |
Runway dir error |
51 |
Runway dir error |
51 |
CPU n detected a directed error on the system bus (Runway). |
51 |
CPU |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
5n08 |
51 |
SYS BD |
51 |
SYS BD |
51 |
Runway broad err |
51 |
Runway broad err |
51 |
CPU n detected a broadcast error on the system bus (Runway). |
51 |
CPU |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
5n0A |
51 |
SYS BD |
51 |
SYS BD |
51 |
illegal response |
51 |
illegal response |
51 |
CPU n received data that did not match any outstanding data request. |
51 |
CPU |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
5n0B |
51 |
SYS BD |
51 |
SYS BD |
51 |
bus timeout |
51 |
bus timeout |
51 |
CPU n timed out before receiving requested data. The responder is logged in the system responder ... |
51 |
CPU |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
5n0C |
51 |
SYS BD |
51 |
SYS BD |
51 |
CPU sync failure |
51 |
CPU sync failure |
51 |
CPU n’s synchronizer detected a rule violation on the system bus (Runway). |
51 |
CPU |
51 |
<TABLE ROW> |
51 |
INI |
51 |
7000 |
51 |
DIMM |
51 |
DIMM |
51 |
start DIMM scan |
51 |
start DIMM scan |
51 |
Start looking for installed DIMMs. |
51 |
Start looking for installed DIMMs. |
51 |
<TABLE ROW> |
51 |
INI |
51 |
7002 |
51 |
SYS BD |
51 |
SYS BD |
51 |
init mem tables |
51 |
init mem tables |
51 |
Initialize memory data structures. |
51 |
Initialize memory data structures. |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
7004 |
51 |
SYS BD |
51 |
SYS BD |
51 |
mem plt upd fail |
51 |
mem plt upd fail |
51 |
Error updating memory platform data. |
51 |
Error updating memory platform data. |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
7005 |
51 |
DIMM |
51 |
DIMM |
51 |
insufficient mem |
51 |
insufficient mem |
51 |
Insufficient memory detected to continue. |
51 |
Insufficient memory detected to continue. |
51 |
<TABLE ROW> |
51 |
TST |
51 |
7010 |
51 |
DIMM |
51 |
DIMM |
51 |
check DIMM order |
51 |
check DIMM order |
51 |
Start memory DIMM order check. |
51 |
Start memory DIMM order check. |
51 |
<TABLE ROW> |
51 |
WRN |
51 |
7011 |
51 |
DIMM |
51 |
DIMM |
51 |
skip DIMM ord ck |
51 |
skip DIMM ord ck |
51 |
Bypass memory DIMM order check. |
51 |
Bypass memory DIMM order check. |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
7012 |
51 |
DIMM |
51 |
DIMM |
51 |
DIMM order error |
51 |
DIMM order error |
51 |
Memory DIMMs are not in the proper order. |
51 |
Memory DIMMs are not in the proper order. |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
7013 |
51 |
DIMM |
51 |
DIMM |
51 |
DIMM order error |
51 |
DIMM order error |
51 |
Memory DIMMs are not in the proper order. As a result, the system cannot access one or more DIMMs... |
51 |
Memory DIMMs are not in the proper order. As a result, the system cannot access one or more DIMMs... |
51 |
<TABLE ROW> |
51 |
TST |
51 |
7016 |
51 |
DIMM |
51 |
DIMM |
51 |
DIMM pair check |
51 |
DIMM pair check |
51 |
Start memory DIMM pair check (DIMMs in a pair (e.g. 0a/0b) must match in J7xxx). |
51 |
Start memory DIMM pair check (DIMMs in a pair (e.g. 0a/0b) must match in J7xxx). |
51 |
<TABLE ROW> |
51 |
WRN |
51 |
7017 |
51 |
DIMM |
51 |
DIMM |
51 |
skip mem pair ck |
51 |
skip mem pair ck |
51 |
Bypass memory DIMM set check. |
51 |
Bypass memory DIMM set check. |
51 |
<TABLE ROW> |
51 |
FLT |
51 |
701F |
51 |
DIMM |
51 |
DIMM |
51 |
no memory found |
51 |
no memory found |
51 |
Memory scan couldn’t find any DIMMs. |
51 |
Memory scan couldn’t find any DIMMs. |
51 |
<TABLE ROW> |
52 |
TST |
52 |
7020 |
52 |
SYS BD |
52 |
SYS BD |
52 |
search for IMM |
52 |
search for IMM |
52 |
Try to find a single memory bank to use for the initial memory module. |
52 |
Try to find a single memory bank to use for the initial memory module. |
52 |
<TABLE ROW> |
52 |
TST |
52 |
703s |
52 |
DIMM |
52 |
DIMM |
52 |
DIMM s IMM vrfy |
52 |
DIMM |
52 |
DIMM s was the initial memory module last boot. Verify it still works. |
52 |
DIMM |
52 |
<TABLE ROW> |
52 |
FLT |
52 |
704s |
52 |
DIMM |
52 |
DIMM |
52 |
DIMM s IMM fail |
52 |
DIMM |
52 |
DIMM s failed the initial memory module test. |
52 |
DIMM |
52 |
<TABLE ROW> |
52 |
TST |
52 |
705s |
52 |
DIMM |
52 |
DIMM |
52 |
DIMM s IMM test |
52 |
DIMM |
52 |
Test DIMM in slot s as the initial memory module. |
52 |
Test DIMM in slot |
52 |
<TABLE ROW> |
52 |
INI |
52 |
706s |
52 |
DIMM |
52 |
DIMM |
52 |
DIMM s is IMM |
52 |
DIMM |
52 |
DIMM s chosen as initial memory module. |
52 |
DIMM |
52 |
<TABLE ROW> |
52 |
INI |
52 |
70F0 |
52 |
DIMM |
52 |
DIMM scan done |
52 |
DIMM scan done |
52 |
Memory DIMM scan complete. |
52 |
Memory DIMM scan complete. |
52 |
<TABLE ROW> |
52 |
TST |
52 |
7100 |
52 |
SYS BD |
52 |
SYS BD |
52 |
mem register tst |
52 |
mem register tst |
52 |
Start testing registers in memory controller. |
52 |
Start testing registers in memory controller. |
52 |
<TABLE ROW> |
52 |
WRN |
52 |
7101 |
52 |
SYS BD |
52 |
SYS BD |
52 |
skip mem reg tst |
52 |
skip mem reg tst |
52 |
Bypass the memory controller register test. |
52 |
Bypass the memory controller register test. |
52 |
<TABLE ROW> |
52 |
FLT |
52 |
7102 |
52 |
SYS BD |
52 |
SYS BD |
52 |
mem addr reg tst |
52 |
mem addr reg tst |
52 |
Firmware detected an error in the memory controller address registers. |
52 |
Firmware detected an error in the memory controller address registers. |
52 |
<TABLE ROW> |
52 |
FLT |
52 |
7103 |
52 |
SYS BD |
52 |
SYS BD |
52 |
mem mbat reg tst |
52 |
mem mbat reg tst |
52 |
Firmware detected an error in the memory controller bank registers. |
52 |
Firmware detected an error in the memory controller bank registers. |
52 |
<TABLE ROW> |
52 |
FLT |
52 |
7104 |
52 |
SYS BD |
52 |
SYS BD |
52 |
mem reg tst fail |
52 |
mem reg tst fail |
52 |
Firmware detected an error in the memory controller memory registers. |
52 |
Firmware detected an error in the memory controller memory registers. |
52 |
<TABLE ROW> |
52 |
FLT |
52 |
7105 |
52 |
SYS BD |
52 |
SYS BD |
52 |
mem err reg test |
52 |
mem err reg test |
52 |
Firmware detected an error in the memory controller error registers. |
52 |
Firmware detected an error in the memory controller error registers. |
52 |
<TABLE ROW> |
52 |
FLT |
52 |
7106 |
52 |
SYS BD |
52 |
SYS BD |
52 |
mem err clr fail |
52 |
mem err clr fail |
52 |
Firmware was unable to clear the error registers after testing. |
52 |
Firmware was unable to clear the error registers after testing. |
52 |
<TABLE ROW> |
52 |
INI |
52 |
7200 |
52 |
DIMM |
52 |
DIMM |
52 |
strt DIMM detect |
52 |
strt DIMM detect |
52 |
Start the Serial Presence Detection (SPD) to search for memory DIMMs. |
52 |
Start the Serial Presence Detection (SPD) to search for memory DIMMs. |
52 |
<TABLE ROW> |
52 |
INI |
52 |
7201 |
52 |
DIMM |
52 |
DIMM |
52 |
DIMM detect x% |
52 |
DIMM detect |
52 |
SPD is x% finished. |
52 |
SPD is |
52 |
<TABLE ROW> |
52 |
WRN |
52 |
7202 |
52 |
SYS BD |
52 |
SYS BD |
52 |
skip DIMM detect |
52 |
skip DIMM detect |
52 |
Bypass Serial Presence Detection. |
52 |
Bypass Serial Presence Detection. |
52 |
<TABLE ROW> |
52 |
FLT |
52 |
7203 |
52 |
DIMM |
52 |
DIMM |
52 |
unsupp DIMM type |
52 |
unsupp DIMM type |
52 |
SPD found an unsupported DIMM type. |
52 |
SPD found an unsupported DIMM type. |
52 |
<TABLE ROW> |
52 |
FLT |
52 |
7204 |
52 |
DIMM |
52 |
DIMM |
52 |
SPD fatal error |
52 |
SPD fatal error |
52 |
SPD detected an unexpected, fatal error. |
52 |
SPD detected an unexpected, fatal error. |
52 |
<TABLE ROW> |
52 |
INI |
52 |
7205 |
52 |
DIMM |
52 |
DIMM |
52 |
add HP DIMM type |
52 |
add HP DIMM type |
52 |
New HP manufactured DIMM type added to tables. |
52 |
New HP manufactured DIMM type added to tables. |
52 |
<TABLE ROW> |
52 |
INI |
52 |
7206 |
52 |
DIMM |
52 |
DIMM |
52 |
non-HP DIMM type |
52 |
non-HP DIMM type |
52 |
New non-HP DIMM type added to tables (use at own risk). |
52 |
New non-HP DIMM type added to tables (use at own risk). |
52 |
<TABLE ROW> |
53 |
FLT |
53 |
7207 |
53 |
DIMM |
53 |
DIMM |
53 |
DIMM table full |
53 |
DIMM table full |
53 |
The DIMM table is full--cannot add new type. |
53 |
The DIMM table is full--cannot add new type. |
53 |
<TABLE ROW> |
53 |
FLT |
53 |
7208 |
53 |
DIMM |
53 |
DIMM |
53 |
no DIMMs found |
53 |
no DIMMs found |
53 |
SPD didn’t find any memory DIMMs. |
53 |
SPD didn’t find any memory DIMMs. |
53 |
<TABLE ROW> |
53 |
INI |
53 |
721s |
53 |
DIMM |
53 |
DIMM |
53 |
is DIMM s inst? |
53 |
is DIMM |
53 |
SPD is checking memory slot s. |
53 |
SPD is checking memory slot |
53 |
<TABLE ROW> |
53 |
INI |
53 |
722s |
53 |
DIMM |
53 |
DIMM |
53 |
???? DIMM in s |
53 |
???? DIMM in s |
53 |
SPD found a DIMM in slot s, but can’t determine its size. DIMM will not be used. |
53 |
SPD found a DIMM in slot |
53 |
<TABLE ROW> |
53 |
INI |
53 |
723s |
53 |
DIMM |
53 |
DIMM |
53 |
128M DIMM in s |
53 |
128M DIMM in s |
53 |
SPD found a 128MB DIMM in slot s. |
53 |
SPD found a 128MB DIMM in slot |
53 |
<TABLE ROW> |
53 |
INI |
53 |
724s |
53 |
DIMM |
53 |
DIMM |
53 |
256M DIMM in s |
53 |
256M DIMM in s |
53 |
SPD found a 256MB DIMM in slot s. |
53 |
SPD found a 256MB DIMM in slot |
53 |
<TABLE ROW> |
53 |
INI |
53 |
725s |
53 |
DIMM |
53 |
DIMM |
53 |
512M DIMM in s |
53 |
512M DIMM in s |
53 |
SPD found a 512MB DIMM in slot s. |
53 |
SPD found a 512MB DIMM in slot |
53 |
<TABLE ROW> |
53 |
FLT |
53 |
72As |
53 |
DIMM |
53 |
DIMM |
53 |
DIMM s checksum |
53 |
DIMM s checksum |
53 |
DIMM in slot s failed SPD checksum and will not be used. |
53 |
DIMM in slot |
53 |
<TABLE ROW> |
53 |
FLT |
53 |
72Cs |
53 |
DIMM |
53 |
DIMM |
53 |
DIMM s mismatch |
53 |
DIMM s mismatch |
53 |
DIMM in slot s didn’t match the other in pair. (J7xxx only--DIMMs must be in matched pairs.) |
53 |
DIMM in slot |
53 |
<TABLE ROW> |
53 |
FLT |
53 |
72Ds |
53 |
DIMM |
53 |
DIMM |
53 |
DIMM s load err |
53 |
Memory DIMMs are not in the proper order. As a result, the system cannot access DIMM s and has de... |
53 |
Memory DIMMs are not in the proper order. As a result, the system cannot access DIMM |
53 |
<TABLE ROW> |
53 |
INI |
53 |
7300 |
53 |
SYS BD |
53 |
SYS BD |
53 |
mem config start |
53 |
mem config start |
53 |
Starting main memory configuration. |
53 |
Starting main memory configuration. |
53 |
<TABLE ROW> |
53 |
TST |
53 |
TST |
53 |
7301 |
53 |
7301 |
53 |
SYS BD |
53 |
SYS BD |
53 |
check mem config |
53 |
check mem config |
53 |
Checking for memory configuration change since last boot. |
53 |
Checking for memory configuration change since last boot. |
53 |
<TABLE ROW> |
53 |
WRN |
53 |
7302 |
53 |
SYS BD |
53 |
SYS BD |
53 |
mem confg changd |
53 |
mem confg changd |
53 |
Memory physical configuration changed since last boot. |
53 |
Memory physical configuration changed since last boot. |
53 |
<TABLE ROW> |
53 |
INI |
53 |
INI |
53 |
7303 |
53 |
7303 |
53 |
SYS BD |
53 |
SYS BD |
53 |
use confg change |
53 |
use confg change |
53 |
Memory physical configuration didn’t use saved configuration change. Use stored configuration data. |
53 |
Memory physical configuration didn’t use saved configuration change. Use stored configuration data. |
53 |
<TABLE ROW> |
53 |
INI |
53 |
INI |
53 |
7304 |
53 |
7304 |
53 |
SYS BD |
53 |
build mem intrlv |
53 |
build mem intrlv |
53 |
Building memory configuration with all DIMMs interleaved. |
53 |
<TABLE ROW> |
53 |
INI |
53 |
INI |
53 |
7305 |
53 |
7305 |
53 |
SYS BD |
53 |
SYS BD |
53 |
save mem config |
53 |
save mem config |
53 |
Saving memory configuration information in non-volatile memory. |
53 |
Saving memory configuration information in non-volatile memory. |
53 |
<TABLE ROW> |
53 |
WRN |
53 |
7306 |
53 |
SYS BD |
53 |
SYS BD |
53 |
use alt mem conf |
53 |
use alt mem conf |
53 |
Memory will be configured from fixed values, instead of detected DIMMs. |
53 |
Memory will be configured from fixed values, instead of detected DIMMs. |
53 |
<TABLE ROW> |
53 |
INI |
53 |
7307 |
53 |
SYS BD |
53 |
SYS BD |
53 |
interleve memory |
53 |
Generating the memory interleave. |
53 |
Generating the memory interleave. |
53 |
<TABLE ROW> |
53 |
FLT |
53 |
7308 |
53 |
SYS BD |
53 |
SYS BD |
53 |
PDT is disabled |
53 |
PDT is disabled |
53 |
Firmware detected bad memory pages, but the Page Deallocation Table is disabled. |
53 |
Firmware detected bad memory pages, but the Page Deallocation Table is disabled. |
53 |
<TABLE ROW> |
54 |
FLT |
54 |
FLT |
54 |
7309 |
54 |
DIMM |
54 |
insufficient mem |
54 |
Insufficient error-free memory to continue. |
54 |
<TABLE ROW> |
54 |
FLT |
54 |
730C |
54 |
SYS BD |
54 |
SYS BD |
54 |
mem intrlv fail |
54 |
mem intrlv fail |
54 |
Memory interleave generation failed. |
54 |
Memory interleave generation failed. |
54 |
<TABLE ROW> |
54 |
INI |
54 |
730F |
54 |
SYS BD |
54 |
SYS BD |
54 |
mem config done |
54 |
mem config done |
54 |
Main memory configuration complete. |
54 |
Main memory configuration complete. |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7400 |
54 |
DIMM |
54 |
DIMM |
54 |
non-dest mem tst |
54 |
non-dest mem tst |
54 |
Starting non-destructive memory test. |
54 |
Starting non-destructive memory test. |
54 |
<TABLE ROW> |
54 |
TST |
54 |
740F |
54 |
DIMM |
54 |
DIMM |
54 |
non-dst tst done |
54 |
non-dst tst done |
54 |
Non-destructive memory test complete. |
54 |
Non-destructive memory test complete. |
54 |
<TABLE ROW> |
54 |
INI |
54 |
7500 |
54 |
SYS BD |
54 |
SYS BD |
54 |
memory reset |
54 |
memory reset |
54 |
Resetting memory system. |
54 |
Resetting memory system. |
54 |
<TABLE ROW> |
54 |
WRN |
54 |
7501 |
54 |
SYS BD |
54 |
SYS BD |
54 |
mem log clr warn |
54 |
mem log clr warn |
54 |
Memory error logs didn’t clear on first try. |
54 |
Memory error logs didn’t clear on first try. |
54 |
<TABLE ROW> |
54 |
FLT |
54 |
7502 |
54 |
SYS BD |
54 |
SYS BD |
54 |
mem err log fail |
54 |
mem err log fail |
54 |
Firmware could not clear memory error logs. |
54 |
Firmware could not clear memory error logs. |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7600 |
54 |
DIMM |
54 |
DIMM |
54 |
dest mem test |
54 |
dest mem test |
54 |
Starting the destructive memory test. |
54 |
Starting the destructive memory test. |
54 |
<TABLE ROW> |
54 |
WRN |
54 |
7601 |
54 |
DIMM |
54 |
DIMM |
54 |
mem init only |
54 |
mem init only |
54 |
Skip the test, just initialize memory to save time. |
54 |
Skip the test, just initialize memory to save time. |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7602 |
54 |
DIMM |
54 |
DIMM |
54 |
tst 1st mem page |
54 |
tst 1st mem page |
54 |
Starting 3-pass test of first memory page. |
54 |
Starting 3-pass test of first memory page. |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7603 |
54 |
DIMM |
54 |
DIMM |
54 |
tst rest of mem |
54 |
tst rest of mem |
54 |
Starting 3-pass test of the rest of memory. |
54 |
Starting 3-pass test of the rest of memory. |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7604 |
54 |
DIMM |
54 |
DIMM |
54 |
start 1st pass |
54 |
start 1st pass |
54 |
Starting 1st pass of memory test (write pseudorandom sequence). |
54 |
Starting 1st pass of memory test (write pseudorandom sequence). |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7605 |
54 |
DIMM |
54 |
DIMM |
54 |
1st pass x% |
54 |
1st pass |
54 |
First pass is x% complete. |
54 |
First pass is |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7606 |
54 |
DIMM |
54 |
DIMM |
54 |
start 2nd pass |
54 |
start 2nd pass |
54 |
Starting 2nd pass of memory test (verify pseudorandom sequence, write inverse). |
54 |
Starting 2nd pass of memory test (verify pseudorandom sequence, write inverse). |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7607 |
54 |
DIMM |
54 |
DIMM |
54 |
2nd pass x% |
54 |
2nd pass |
54 |
Second pass is x% complete. |
54 |
Second pass is |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7608 |
54 |
DIMM |
54 |
DIMM |
54 |
start 3rd pass |
54 |
start 3rd pass |
54 |
Starting 3rd pass of memory test (verify inverse sequence). |
54 |
Starting 3rd pass of memory test (verify inverse sequence). |
54 |
<TABLE ROW> |
54 |
TST |
54 |
7609 |
54 |
DIMM |
54 |
DIMM |
54 |
3rd pass x% |
54 |
3rd pass |
54 |
Third pass is x% complete. |
54 |
Third pass is |
54 |
<TABLE ROW> |
54 |
TST |
54 |
760A |
54 |
DIMM |
54 |
DIMM |
54 |
start mem init |
54 |
start mem init |
54 |
Starting memory initialization. (Initialize to zero to set ECC.) |
54 |
Starting memory initialization. (Initialize to zero to set ECC.) |
54 |
<TABLE ROW> |
54 |
TST |
54 |
760B |
54 |
DIMM |
54 |
DIMM |
54 |
mem init x% |
54 |
mem init |
54 |
Memory initialization is x% complete. |
54 |
Memory initialization is |
54 |
<TABLE ROW> |
54 |
WRN |
54 |
760C |
54 |
DIMM |
54 |
DIMM |
54 |
repeat dest test |
54 |
repeat dest test |
54 |
Re-execute destructive test for hardware troubleshooting. |
54 |
Re-execute destructive test for hardware troubleshooting. |
54 |
<TABLE ROW> |
54 |
FLT |
54 |
760D |
54 |
DIMM |
54 |
DIMM |
54 |
mem code cpy err |
54 |
mem code cpy err |
54 |
Firmware tried to copy code from ROM to memory, but the copy didn’t match the original. |
54 |
<TABLE ROW> |
54 |
FLT |
54 |
7610 |
54 |
DIMM |
54 |
DIMM |
54 |
ECC wrt/read err |
54 |
Writing and reading back good data caused memory ECC error. |
54 |
<TABLE ROW> |
55 |
FLT |
55 |
7611 |
55 |
DIMM |
55 |
DIMM |
55 |
ECC single data |
55 |
ECC single data |
55 |
Memory ECC test failed to detect single-bit data error. |
55 |
Memory ECC test failed to detect single-bit data error. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7612 |
55 |
DIMM |
55 |
DIMM |
55 |
ECC single ECC |
55 |
ECC single ECC |
55 |
Memory ECC test failed to detect single-bit ECC error. |
55 |
Memory ECC test failed to detect single-bit ECC error. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7613 |
55 |
DIMM |
55 |
DIMM |
55 |
ECC multipl data |
55 |
ECC multipl data |
55 |
Memory ECC test failed to detect multiple-bit data error. |
55 |
Memory ECC test failed to detect multiple-bit data error. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7614 |
55 |
DIMM |
55 |
DIMM |
55 |
ECC multpl signl |
55 |
ECC multpl signl |
55 |
Memory ECC test failed to signal multiple-bit error. |
55 |
Memory ECC test failed to signal multiple-bit error. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7800 |
55 |
SYS BD |
55 |
SYS BD |
55 |
mem err summary |
55 |
mem err summary |
55 |
Printing memory error summary word to RS-232. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7801 |
55 |
SYS BD |
55 |
SYS BD |
55 |
bus ctrl par err |
55 |
bus ctrl par err |
55 |
System bus (Runway) control parity error detected. |
55 |
System bus (Runway) control parity error detected. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7802 |
55 |
SYS BD |
55 |
SYS BD |
55 |
bus addr par err |
55 |
bus addr par err |
55 |
System bus (Runway) address parity error detected. |
55 |
System bus (Runway) address parity error detected. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7803 |
55 |
SYS BD |
55 |
SYS BD |
55 |
bus data par err |
55 |
bus data par err |
55 |
System bus (Runway) data parity error detected. |
55 |
System bus (Runway) data parity error detected. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7804 |
55 |
SYS BD |
55 |
SYS BD |
55 |
mem out of range |
55 |
mem out of range |
55 |
Memory access outside configured memory space. |
55 |
Memory access outside configured memory space. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7805 |
55 |
SYS BD |
55 |
SYS BD |
55 |
bus broadcst err |
55 |
bus broadcst err |
55 |
System bus (Runway) broadcast error detected. |
55 |
System bus (Runway) broadcast error detected. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7806 |
55 |
SYS BD |
55 |
SYS BD |
55 |
mem addr par err |
55 |
mem addr par err |
55 |
Memory bus address parity error detected. |
55 |
Memory bus address parity error detected. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7807 |
55 |
SYS BD |
55 |
SYS BD |
55 |
mem ctlr stat wd |
55 |
Printing memory controller status word to RS-232. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
781s |
55 |
DIMM |
55 |
DIMM |
55 |
DIMM s uncor err |
55 |
DIMM |
55 |
Uncorrectable ECC error detected in DIMM s. |
55 |
Uncorrectable ECC error detected in DIMM s. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
782s |
55 |
DIMM |
55 |
DIMM |
55 |
DIMM s corr err |
55 |
DIMM |
55 |
DIMM s is bad and needs replacing. |
55 |
DIMM |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
783s |
55 |
DIMM |
55 |
DIMM |
55 |
Replace DIMM s |
55 |
Replace DIMM |
55 |
Correctable ECC error detected in DIMM s. |
55 |
Correctable ECC error detected in DIMM |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7840 |
55 |
SYS BD |
55 |
SYS BD |
55 |
unexpected HPMC |
55 |
unexpected HPMC |
55 |
Unexpected HPMC detected. |
55 |
Unexpected HPMC detected. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
FLT |
55 |
7841 |
55 |
7841 |
55 |
SYS BD |
55 |
SYS BD |
55 |
mem status invld |
55 |
mem status invld |
55 |
Memory error status word is invalid. |
55 |
Memory error status word is invalid. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7842 |
55 |
SYS BD |
55 |
SYS BD |
55 |
mem summ invalid |
55 |
mem summ invalid |
55 |
Memory summary word is invalid. |
55 |
Memory summary word is invalid. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7843 |
55 |
SYS BD |
55 |
SYS BD |
55 |
fwd prog invalid |
55 |
fwd prog invalid |
55 |
Memory forward progress word is invalid. |
55 |
Memory forward progress word is invalid. |
55 |
<TABLE ROW> |
55 |
FLT |
55 |
7844 |
55 |
SYS BD |
55 |
SYS BD |
55 |
mem HPMC summ wd |
55 |
mem HPMC summ wd |
55 |
Printing memory error summary word to RS-232. |
55 |
<TABLE ROW> |
56 |
FLT |
56 |
7845 |
56 |
SYS BD |
56 |
SYS BD |
56 |
mem ctlr stat wd |
56 |
Printing memory controller status word to RS-232. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7846 |
56 |
SYS BD |
56 |
SYS BD |
56 |
mem err overflow |
56 |
mem err overflow |
56 |
Multiple memory errors detected. |
56 |
Multiple memory errors detected. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7848 |
56 |
SYS BD |
56 |
SYS BD |
56 |
addr not mapped |
56 |
addr not mapped |
56 |
Memory address outside configured memory space. |
56 |
Memory address outside configured memory space. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
785s |
56 |
DIMM |
56 |
DIMM |
56 |
MBE in DIMM s |
56 |
MBE in DIMM |
56 |
Destructive memory test detected an uncorrectable memory error in DIMM s. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
786s |
56 |
DIMM |
56 |
DIMM |
56 |
SBE&MBE DIMM s |
56 |
SBE&MBE DIMM |
56 |
Destructive memory test detected both an uncorrectable and a correctable memory error in DIMM s. |
56 |
Destructive memory test detected both an uncorrectable and a correctable memory error in DIMM |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
787s |
56 |
DIMM |
56 |
DIMM |
56 |
mem err DIMM s |
56 |
mem err DIMM |
56 |
Destructive memory test detected a pattern compare error in DIMM s. |
56 |
Destructive memory test detected a pattern compare error in DIMM |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
788s |
56 |
DIMM |
56 |
DIMM |
56 |
SBE in DIMM s |
56 |
SBE in DIMM |
56 |
Destructive memory test detected a correctable memory error in DIMM s. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7890 |
56 |
DIMM |
56 |
DIMM |
56 |
MBE overwrt SBE |
56 |
MBE overwrt SBE |
56 |
Firmware replaced a correctable memory error entry in the PDT with an uncorrectable memory error ... |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7891 |
56 |
DIMM |
56 |
DIMM |
56 |
dup entry in PDT |
56 |
dup entry in PDT |
56 |
The PDT already contains an entry at that address. |
56 |
The PDT already contains an entry at that address. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7892 |
56 |
SYS BD |
56 |
SYS BD |
56 |
PDT write error |
56 |
PDT write error |
56 |
Error adding the entry to the PDT. |
56 |
Error adding the entry to the PDT. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7893 |
56 |
SYS BD |
56 |
SYS BD |
56 |
PDT is full |
56 |
PDT is full |
56 |
The PDT is full--cannot add new entry. |
56 |
The PDT is full--cannot add new entry. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7900 |
56 |
SYS BD |
56 |
SYS BD |
56 |
no DMT entry |
56 |
no DMT entry |
56 |
Internal error--cannot find DIMM entry. |
56 |
Internal error--cannot find DIMM entry. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7901 |
56 |
SYS BD |
56 |
SYS BD |
56 |
no rank entry |
56 |
no rank entry |
56 |
Internal error--cannot find rank entry. |
56 |
Internal error--cannot find rank entry. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7902 |
56 |
SYS BD |
56 |
SYS BD |
56 |
bad refrsh intvl |
56 |
bad refrsh intvl |
56 |
Computed refresh interval is invalid. |
56 |
Computed refresh interval is invalid. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
FLT |
56 |
7903 |
56 |
SYS BD |
56 |
SYS BD |
56 |
mem intrlv fail |
56 |
mem intrlv fail |
56 |
Cannot generate memory interleave. |
56 |
Cannot generate memory interleave. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7904 |
56 |
SYS BD |
56 |
SYS BD |
56 |
mem reloc failed |
56 |
mem reloc failed |
56 |
Cannot interleave with relocated range (3.75GB - 4.0GB). |
56 |
Cannot interleave with relocated range (3.75GB - 4.0GB). |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
7905 |
56 |
SYS BD |
56 |
SYS BD |
56 |
mem intrlv error |
56 |
mem intrlv error |
56 |
Undefined memory interleave failure. |
56 |
Undefined memory interleave failure. |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
79FF |
56 |
SYS BD |
56 |
SYS BD |
56 |
mem firmware err |
56 |
mem firmware err |
56 |
Internal error--never expected this to happen. |
56 |
Internal error--never expected this to happen. |
56 |
<TABLE ROW> |
56 |
WRN |
56 |
80F3 |
56 |
SYS BD |
56 |
SYS BD |
56 |
err rd IODC byte |
56 |
Cannot read IODC from ROM or card. |
56 |
Cannot read IODC from ROM or card. |
56 |
<TABLE ROW> |
56 |
WRN |
56 |
80F4 |
56 |
EXT IO |
56 |
EXT IO |
56 |
boot read error |
56 |
Cannot load IODC entry_init for boot device. |
56 |
Cannot load IODC entry_init for boot device. |
56 |
<TABLE ROW> |
56 |
WRN |
56 |
80F5 |
56 |
EXT IO |
56 |
EXT IO |
56 |
boot exec error |
56 |
boot exec error |
56 |
Error initializing boot device. |
56 |
Error initializing boot device. |
56 |
<TABLE ROW> |
57 |
WRN |
57 |
80F6 |
57 |
EXT IO |
57 |
EXT IO |
57 |
boot read error |
57 |
boot read error |
57 |
Cannot load IODC entry_io for boot device. |
57 |
Cannot load IODC entry_io for boot device. |
57 |
<TABLE ROW> |
57 |
WRN |
57 |
80F7 |
57 |
EXT IO |
57 |
EXT IO |
57 |
boot IO error |
57 |
boot IO error |
57 |
Error detected during boot device I/O. |
57 |
Error detected during boot device I/O. |
57 |
<TABLE ROW> |
57 |
WRN |
57 |
WRN |
57 |
80F8 |
57 |
EXT IO |
57 |
EXT IO |
57 |
invalid boot dev |
57 |
invalid boot dev |
57 |
Invalid boot device class; bad IODC? |
57 |
Invalid boot device class; bad IODC? |
57 |
<TABLE ROW> |
57 |
WRN |
57 |
80FC |
57 |
EXT IO |
57 |
EXT IO |
57 |
invalid boot dev |
57 |
invalid boot dev |
57 |
Unexpected error; bad IODC? |
57 |
Unexpected error; bad IODC? |
57 |
<TABLE ROW> |
57 |
INI |
57 |
8800 |
57 |
IOCARD |
57 |
IOCARD |
57 |
PCI BusWlk start |
57 |
PCI BusWlk start |
57 |
Starting PCI bus and device discovery. |
57 |
Starting PCI bus and device discovery. |
57 |
<TABLE ROW> |
57 |
INI |
57 |
88r1 |
57 |
IOCARD |
57 |
IOCARD |
57 |
PCI Rope r walk |
57 |
PCI Rope |
57 |
Starting PCI bus and device discovery on Rope r. |
57 |
Starting PCI bus and device discovery on Rope |
57 |
<TABLE ROW> |
57 |
INI |
57 |
8802 |
57 |
IOCARD |
57 |
IOCARD |
57 |
PCI BusWalk done |
57 |
PCI BusWalk done |
57 |
PCI bus and device discovery complete. |
57 |
PCI bus and device discovery complete. |
57 |
<TABLE ROW> |
57 |
INI |
57 |
8803 |
57 |
SYS BD |
57 |
SYS BD |
57 |
PCI alloc done |
57 |
PCI alloc done |
57 |
Done allocating address space for PCI devices. |
57 |
Done allocating address space for PCI devices. |
57 |
<TABLE ROW> |
57 |
INI |
57 |
8804 |
57 |
SYS BD |
57 |
SYS BD |
57 |
PCI config done |
57 |
PCI config done |
57 |
Done configuring PCI devices. |
57 |
Done configuring PCI devices. |
57 |
<TABLE ROW> |
57 |
FLT |
57 |
881r |
57 |
IO BD |
57 |
IO BD |
57 |
R2PCIr not found |
57 |
R2PCI |
57 |
Rope-to-PCI bridge r not found. |
57 |
Rope-to-PCI bridge |
57 |
<TABLE ROW> |
57 |
WRN |
57 |
WRN |
57 |
882r |
57 |
882 |
57 |
IO BD |
57 |
IO BD |
57 |
R2PCIr not found |
57 |
R2PCI |
57 |
Rope-to-PCI bridge r initialization failed. |
57 |
Rope-to-PCI bridge r initialization failed. |
57 |
<TABLE ROW> |
57 |
FLT |
57 |
883r |
57 |
IO BD |
57 |
IO BD |
57 |
Roper config err |
57 |
Rope |
57 |
Rope r configuration failed. |
57 |
Rope |
57 |
<TABLE ROW> |
57 |
INI |
57 |
884r |
57 |
884 |
57 |
EXT IO |
57 |
EXT IO |
57 |
Roper debug tggl |
57 |
Rope |
57 |
Rope r debug register toggled. |
57 |
<TABLE ROW> |
57 |
FLT |
57 |
FLT |
57 |
884r |
57 |
884 |
57 |
EXT IO |
57 |
Roper tgl fail |
57 |
Rope |
57 |
Rope r debug register toggle failed. |
57 |
Rope |
57 |
<TABLE ROW> |
57 |
INI |
57 |
INI |
57 |
8850 |
57 |
8850 |
57 |
SYS BD |
57 |
early rope0 init |
57 |
early rope0 init |
57 |
Initializing rope 0 for early RS-232 output. |
57 |
Initializing rope 0 for early RS-232 output. |
57 |
<TABLE ROW> |
57 |
FLT |
57 |
FLT |
57 |
8850 |
57 |
8850 |
57 |
SYS BD |
57 |
SYS BD |
57 |
rope0 init fail |
57 |
rope0 init fail |
57 |
Couldn’t initialize rope 0. |
57 |
Couldn’t initialize rope 0. |
57 |
<TABLE ROW> |
57 |
INI |
57 |
INI |
57 |
8860 |
57 |
8860 |
57 |
SYS BD |
57 |
SYS BD |
57 |
rope0 init done |
57 |
rope0 init done |
57 |
Rope 0 initialization complete. |
57 |
Rope 0 initialization complete. |
57 |
<TABLE ROW> |
57 |
INI |
57 |
INI |
57 |
8870 |
57 |
8870 |
57 |
IO BD |
57 |
IO BD |
57 |
early R2PCI init |
57 |
early R2PCI init |
57 |
Initializing Rope-to-PCI bridge 0 for early RS-232 output. |
57 |
Initializing Rope-to-PCI bridge 0 for early RS-232 output. |
57 |
<TABLE ROW> |
57 |
FLT |
57 |
FLT |
57 |
8870 |
57 |
8870 |
57 |
IO BD |
57 |
IO BD |
57 |
R2PCI init fail |
57 |
R2PCI init fail |
57 |
Couldn’t initialize Rope-to-PCI bridge 0. |
57 |
Couldn’t initialize Rope-to-PCI bridge 0. |
57 |
<TABLE ROW> |
57 |
INI |
57 |
INI |
57 |
8880 |
57 |
IO BD |
57 |
IO BD |
57 |
R2PCI init done |
57 |
R2PCI init done |
57 |
Rope-to-PCI bridge 0 initialization complete. |
57 |
<TABLE ROW> |
57 |
INI |
57 |
INI |
57 |
8890 |
57 |
8890 |
57 |
IO BD |
57 |
IO BD |
57 |
early Super init |
57 |
early Super init |
57 |
Initializing Super-I/O for early RS-232 output. |
57 |
Initializing Super-I/O for early RS-232 output. |
57 |
<TABLE ROW> |
57 |
FLT |
57 |
FLT |
57 |
8890 |
57 |
8890 |
57 |
IO BD |
57 |
Super init fail |
57 |
Super init fail |
57 |
Couldn’t initialize Super-I/O. |
57 |
Couldn’t initialize Super-I/O. |
57 |
<TABLE ROW> |
57 |
INI |
57 |
INI |
57 |
88A0 |
57 |
88A0 |
57 |
IO BD |
57 |
IO BD |
57 |
Super init done |
57 |
Super init done |
57 |
Super-I/O initialization complete. |
57 |
<TABLE ROW> |
57 |
WRN |
57 |
8A03 |
57 |
EXT IO |
57 |
EXT IO |
57 |
No graph console |
57 |
No graph console |
57 |
Cannot re-establish communications with the graphics console. |
57 |
Cannot re-establish communications with the graphics console. |
57 |
<TABLE ROW> |
58 |
WRN |
58 |
8A04 |
58 |
EXT IO |
58 |
EXT IO |
58 |
No USB keyboard |
58 |
No USB keyboard |
58 |
Cannot re-establish communications with the USB keyboard. |
58 |
Cannot re-establish communications with the USB keyboard. |
58 |
<TABLE ROW> |
58 |
TST |
58 |
8C06 |
58 |
EXT IO |
58 |
EXT IO |
58 |
PCI BIST test |
58 |
PCI BIST test |
58 |
Running PCI Built-In Self-Test |
58 |
Running PCI Built-In Self-Test |
58 |
<TABLE ROW> |
58 |
WRN |
58 |
8C07 |
58 |
EXT IO |
58 |
EXT IO |
58 |
PCI BIST error |
58 |
PCI BIST error |
58 |
PCI Built-In Self-Test failed. |
58 |
PCI Built-In Self-Test failed. |
58 |
<TABLE ROW> |
58 |
WRN |
58 |
8C08 |
58 |
SYS BD |
58 |
SYS BD |
58 |
PCI alloc error |
58 |
PCI alloc error |
58 |
PCI address space allocation failed. |
58 |
PCI address space allocation failed. |
58 |
<TABLE ROW> |
58 |
WRN |
58 |
8C09 |
58 |
IO BD |
58 |
IO BD |
58 |
PCI mem mngr err |
58 |
PCI mem mngr err |
58 |
Memory allocation for PCI device failed. |
58 |
Memory allocation for PCI device failed. |
58 |
<TABLE ROW> |
58 |
WRN |
58 |
8C0A |
58 |
EXT IO |
58 |
EXT IO |
58 |
PCI mem type err |
58 |
PCI mem type err |
58 |
PCI device requested invalid memory type. |
58 |
PCI device requested invalid memory type. |
58 |
<TABLE ROW> |
58 |
WRN |
58 |
8C0B |
58 |
IO BD |
58 |
IO BD |
58 |
PCI max bus dpth |
58 |
PCI max bus dpth |
58 |
PCI bus depth exceeded maximum supported depth. |
58 |
PCI bus depth exceeded maximum supported depth. |
58 |
<TABLE ROW> |
58 |
WRN |
58 |
8C0C |
58 |
EXT IO |
58 |
EXT IO |
58 |
PCI dev not cnfg |
58 |
PCI dev not cnfg |
58 |
Unable to configure PCI device. |
58 |
Unable to configure PCI device. |
58 |
<TABLE ROW> |
58 |
WRN |
58 |
8C0F |
58 |
IO BD |
58 |
IO BD |
58 |
dev tree ovrflow |
58 |
dev tree ovrflow |
58 |
Data space for PCI devices is full. |
58 |
Data space for PCI devices is full. |
58 |
<TABLE ROW> |
58 |
WRN |
58 |
8DEC |
58 |
IO BD |
58 |
IO BD |
58 |
init LAN SROM |
58 |
init LAN SROM |
58 |
Initializing the core LAN serial EPROM. |
58 |
Initializing the core LAN serial EPROM. |
58 |
<TABLE ROW> |
58 |
SHU |
58 |
8DEC |
58 |
IO BD |
58 |
IO BD |
58 |
resetting system |
58 |
resetting system |
58 |
Restarting system after core LAN initialization. |
58 |
Restarting system after core LAN initialization. |
58 |
<TABLE ROW> |
58 |
FLT |
58 |
8E10 |
58 |
IO BD |
58 |
PARALEL port cfg |
58 |
PARALEL port cfg |
58 |
Parallel port configuration failed. |
58 |
Parallel port configuration failed. |
58 |
<TABLE ROW> |
58 |
FLT |
58 |
8E11 |
58 |
IO BD |
58 |
SERIAL1 port cfg |
58 |
SERIAL1 port cfg |
58 |
Serial 1 port configuration failed. |
58 |
Serial 1 port configuration failed. |
58 |
<TABLE ROW> |
58 |
FLT |
58 |
8E12 |
58 |
IO BD |
58 |
SERIAL2 port cfg |
58 |
SERIAL2 port cfg |
58 |
Serial 2 port configuration failed. |
58 |
Serial 2 port configuration failed. |
58 |
<TABLE ROW> |
58 |
FLT |
58 |
8E13 |
58 |
IO BD |
58 |
FLOPPY drive cfg |
58 |
FLOPPY drive cfg |
58 |
Floppy drive configuration failed. |
58 |
Floppy drive configuration failed. |
58 |
<TABLE ROW> |
58 |
FLT |
58 |
8E20 |
58 |
IO BD |
58 |
bad USB port cfg |
58 |
bad USB port cfg |
58 |
USB port configuration failed. |
58 |
USB port configuration failed. |
58 |
<TABLE ROW> |
58 |
WRN |
58 |
9001 |
58 |
EXT IO |
58 |
EXT IO |
58 |
no console found |
58 |
no console found |
58 |
Search for console display device failed. |
58 |
Search for console display device failed. |
58 |
<TABLE ROW> |
58 |
INI |
58 |
9151 |
58 |
IO BD |
58 |
IO BD |
58 |
init SERIAL_1 |
58 |
init SERIAL_1 |
58 |
Initializing serial 1 port as console display. |
58 |
Initializing serial 1 port as console display. |
58 |
<TABLE ROW> |
58 |
INI |
58 |
9152 |
58 |
IO BD |
58 |
IO BD |
58 |
init SERIAL_2 |
58 |
init SERIAL_2 |
58 |
Initializing serial 2 port as console display. |
58 |
Initializing serial 2 port as console display. |
58 |
<TABLE ROW> |
58 |
INI |
58 |
915F |
58 |
IO BD |
58 |
IO BD |
58 |
init unknown dev |
58 |
Initializing unknown device as console display. |
58 |
Initializing unknown device as console display. |
58 |
<TABLE ROW> |
58 |
INI |
58 |
INI |
58 |
916s |
58 |
EXT IO |
58 |
EXT IO |
58 |
init PCI slot s |
58 |
init PCI slot |
58 |
Initializing PCI device in slot s as console display. |
58 |
Initializing PCI device in slot |
58 |
<TABLE ROW> |
58 |
INI |
58 |
91DB |
58 |
IO BD |
58 |
IO BD |
58 |
init SERIAL_LDB |
58 |
init SERIAL_LDB |
58 |
Initializing serial LDB port as console display. |
58 |
Initializing serial LDB port as console display. |
58 |
<TABLE ROW> |
58 |
INI |
58 |
9C51 |
58 |
IO BD |
58 |
IO BD |
58 |
consol is SER_1 |
58 |
consol is SER_1 |
58 |
Console display is on serial port 1. |
58 |
Console display is on serial port 1. |
58 |
<TABLE ROW> |
59 |
WRN |
59 |
9C51 |
59 |
IO BD |
59 |
IO BD |
59 |
bad init SERIAL1 |
59 |
bad init SERIAL1 |
59 |
Serial port 1 failed to initialize as a console device. |
59 |
Serial port 1 failed to initialize as a console device. |
59 |
<TABLE ROW> |
59 |
INI |
59 |
9C52 |
59 |
IO BD |
59 |
IO BD |
59 |
consol is SER_2 |
59 |
consol is SER_2 |
59 |
Console display is on serial port 2. |
59 |
Console display is on serial port 2. |
59 |
<TABLE ROW> |
59 |
INI |
59 |
9160 |
59 |
EXT IO |
59 |
builtin GRAPHICS |
59 |
builtin GRAPHICS |
59 |
Initializing built-in graphics as console display. |
59 |
Initializing built-in graphics as console display. |
59 |
<TABLE ROW> |
59 |
INI |
59 |
9C52 |
59 |
IO BRD |
59 |
consol is SER_2 |
59 |
consol is SER_2 |
59 |
Console display is on serial port 2. |
59 |
Console display is on serial port 2. |
59 |
<TABLE ROW> |
59 |
WRN |
59 |
9C52 |
59 |
IO BD |
59 |
IO BD |
59 |
bad init SERIAL2 |
59 |
bad init SERIAL2 |
59 |
Serial port 2 failed to initialize as a console device. |
59 |
Serial port 2 failed to initialize as a console device. |
59 |
<TABLE ROW> |
59 |
INI |
59 |
9C6s |
59 |
EXT IO |
59 |
EXT IO |
59 |
consol is GRAPHs |
59 |
consol is GRAPH |
59 |
Console display is on graphics card in PCI slot s. |
59 |
Console display is on graphics card in PCI slot |
59 |
<TABLE ROW> |
59 |
WRN |
59 |
9C6s |
59 |
EXT IO |
59 |
EXT IO |
59 |
bad PCI slot s |
59 |
bad PCI slot |
59 |
Graphics in PCI slot s failed to initialize as a console device. |
59 |
Graphics in PCI slot |
59 |
<TABLE ROW> |
59 |
INI |
59 |
9C8t |
59 |
EXT IO |
59 |
EXT IO |
59 |
cnfg mon type t |
59 |
cnfg mon type |
59 |
Set graphics console to monitor type t. (Seen when cycling through types.) |
59 |
Set graphics console to monitor type |
59 |
<TABLE ROW> |
59 |
WRN |
59 |
9C8t |
59 |
EXT IO |
59 |
EXT IO |
59 |
mon type t fail |
59 |
mon type |
59 |
Failed to configure console to monitor type t. |
59 |
Failed to configure console to monitor type |
59 |
<TABLE ROW> |
59 |
INI |
59 |
9CDB |
59 |
IO BD |
59 |
IO BD |
59 |
consl is SER_LDB |
59 |
consl is SER_LDB |
59 |
Console display is on serial LDB port. |
59 |
Console display is on serial LDB port. |
59 |
<TABLE ROW> |
59 |
WRN |
59 |
9CDB |
59 |
IO BD |
59 |
IO BD |
59 |
bad init SER_LDB |
59 |
bad init SER_LDB |
59 |
Serial LDB port failed to initialize as a console device. |
59 |
Serial LDB port failed to initialize as a console device. |
59 |
<TABLE ROW> |
59 |
FLT |
59 |
A088 |
59 |
IO BD |
59 |
IO BD |
59 |
consl path fault |
59 |
consl path fault |
59 |
Unable to boot--no console device found. |
59 |
Unable to boot--no console device found. |
59 |
<TABLE ROW> |
59 |
WRN |
59 |
A008 |
59 |
EXT IO |
59 |
EXT IO |
59 |
no boot device |
59 |
no boot device |
59 |
Unable to boot--no bootable device found. |
59 |
Unable to boot--no bootable device found. |
59 |
<TABLE ROW> |
59 |
WRN |
59 |
A0BD |
59 |
EXT IO |
59 |
EXT IO |
59 |
device not ready |
59 |
device not ready |
59 |
Boot device not ready--operation may be retried. |
59 |
Boot device not ready--operation may be retried. |
59 |
<TABLE ROW> |
59 |
FLT |
59 |
A0FF |
59 |
EXT IO |
59 |
EXT IO |
59 |
unknown launch |
59 |
unknown launch |
59 |
Unable to boot. Explanation may appear on console. |
59 |
Unable to boot. Explanation may appear on console. |
59 |
<TABLE ROW> |
59 |
WRN |
59 |
A50F |
59 |
EXT IO |
59 |
EXT IO |
59 |
init pri pth err |
59 |
init pri pth err |
59 |
Unable to boot from primary boot device. |
59 |
Unable to boot from primary boot device. |
59 |
<TABLE ROW> |
59 |
WRN |
59 |
A70F |
59 |
EXT IO |
59 |
EXT IO |
59 |
init otr pth err |
59 |
init otr pth err |
59 |
Unable to boot from non-primary boot device. |
59 |
Unable to boot from non-primary boot device. |
59 |
<TABLE ROW> |
59 |
INI |
59 |
C10m |
59 |
SYS BD |
59 |
SYS BD |
59 |
CPUm is monarch |
59 |
CPU |
59 |
CPU m was chosen as the monarch processor. (All other CPUs are slaves.) |
59 |
CPU |
59 |
<TABLE ROW> |
59 |
INI |
59 |
C30m |
59 |
SYS BD |
59 |
SYS BD |
59 |
monarchm test |
59 |
monarch |
59 |
CPU m finished the monarch-only tests and system initialization. |
59 |
CPU |
59 |
<TABLE ROW> |
59 |
INI |
59 |
C30C |
59 |
SYS BD |
59 |
SYS BD |
59 |
mnrch slv chck |
59 |
mnrch slv chck |
59 |
The monarch CPU is checking whether the slaves are in the correct rendezvous. |
59 |
The monarch CPU is checking whether the slaves are in the correct rendezvous. |
59 |
<TABLE ROW> |
60 |
INI |
60 |
C3FF |
60 |
SYS/IO |
60 |
SYS/IO |
60 |
late monarch tst |
60 |
late monarch tst |
60 |
The monarch CPU is starting the late (post-memory) monarch-only tests. |
60 |
The monarch CPU is starting the late (post-memory) monarch-only tests. |
60 |
<TABLE ROW> |
60 |
FLT |
60 |
C3FF |
60 |
SYS/IO |
60 |
SYS/IO |
60 |
late monarch flt |
60 |
late monarch flt |
60 |
The late (post-memory) monarch-only tests failed. |
60 |
The late (post-memory) monarch-only tests failed. |
60 |
<TABLE ROW> |
60 |
INI |
60 |
C4CC |
60 |
SYS BD |
60 |
SYS BD |
60 |
initialize ccp |
60 |
initialize ccp |
60 |
Searching for (lab-only) debugger card. |
60 |
Searching for (lab-only) debugger card. |
60 |
<TABLE ROW> |
60 |
INI |
60 |
C4CD |
60 |
SYS BD |
60 |
SYS BD |
60 |
no ccp found |
60 |
no ccp found |
60 |
Debugger card not found. |
60 |
Debugger card not found. |
60 |
<TABLE ROW> |
60 |
INI |
60 |
C4CE |
60 |
SYS BD |
60 |
SYS BD |
60 |
ccp disabled |
60 |
ccp disabled |
60 |
Debugger card disabled. |
60 |
Debugger card disabled. |
60 |
<TABLE ROW> |
60 |
INI |
60 |
C4CF |
60 |
SYS BD |
60 |
SYS BD |
60 |
ccp found |
60 |
ccp found |
60 |
Debugger card found. |
60 |
Debugger card found. |
60 |
<TABLE ROW> |
60 |
INI |
60 |
C500 |
60 |
SYS BD |
60 |
SYS BD |
60 |
get primary path |
60 |
get primary path |
60 |
Autoboot is reading primary boot path from stable store. |
60 |
Autoboot is reading primary boot path from stable store. |
60 |
<TABLE ROW> |
60 |
INI |
60 |
C540 |
60 |
EXT IO |
60 |
EXT IO |
60 |
init pri path |
60 |
init pri path |
60 |
Autoboot is trying to boot from primary boot device. |
60 |
Autoboot is trying to boot from primary boot device. |
60 |
<TABLE ROW> |
60 |
INI |
60 |
C580 |
60 |
EXT IO |
60 |
EXT IO |
60 |
load IPL pri pth |
60 |
load IPL pri pth |
60 |
Loading IPL from primary boot device. |
60 |
Loading IPL from primary boot device. |
60 |
<TABLE ROW> |
60 |
WRN |
60 |
C5F0 |
60 |
EXT IO |
60 |
EXT IO |
60 |
err read pri IPL |
60 |
err read pri IPL |
60 |
Error loading IPL from primary boot device. |
60 |
Error loading IPL from primary boot device. |
60 |
<TABLE ROW> |
60 |
FLT |
60 |
C5F0 |
60 |
EXT IO |
60 |
EXT IO |
60 |
pri IPL fault |
60 |
pri IPL fault |
60 |
Error loading IPL from primary boot device. |
60 |
Error loading IPL from primary boot device. |
60 |
<TABLE ROW> |
60 |
WRN |
60 |
C5F1 |
60 |
EXT IO |
60 |
EXT IO |
60 |
err read pri IPL |
60 |
err read pri IPL |
60 |
Cannot load IPL from primary boot device--load address invalid. |
60 |
Cannot load IPL from primary boot device--load address invalid. |
60 |
<TABLE ROW> |
60 |
WRN |
60 |
C5F2 |
60 |
EXT IO |
60 |
EXT IO |
60 |
err read pri IPL |
60 |
err read pri IPL |
60 |
Cannot load IPL from primary boot device--file is not IPL image. |
60 |
Cannot load IPL from primary boot device--file is not IPL image. |
60 |
<TABLE ROW> |
60 |
WRN |
60 |
C5F3 |
60 |
EXT IO |
60 |
EXT IO |
60 |
err read pri IPL |
60 |
err read pri IPL |
60 |
Cannot load IPL from primary boot device--IPL image size invalid. |
60 |
Cannot load IPL from primary boot device--IPL image size invalid. |
60 |
<TABLE ROW> |
60 |
WRN |
60 |
C5F4 |
60 |
EXT IO |
60 |
EXT IO |
60 |
err read pri IPL |
60 |
err read pri IPL |
60 |
Cannot load IPL from primary boot device--IPL entry point address invalid. |
60 |
Cannot load IPL from primary boot device--IPL entry point address invalid. |
60 |
<TABLE ROW> |
60 |
WRN |
60 |
C5F8 |
60 |
EXT IO |
60 |
EXT IO |
60 |
err read pri IPL |
60 |
err read pri IPL |
60 |
Cannot load IPL from primary boot device--IPL image checksum failed. |
60 |
Cannot load IPL from primary boot device--IPL image checksum failed. |
60 |
<TABLE ROW> |
60 |
INI |
60 |
C5FF |
60 |
<blank> |
60 |
launch pri IPL |
60 |
launch pri IPL |
60 |
Booting from primary boot path. |
60 |
Booting from primary boot path. |
60 |
<TABLE ROW> |
60 |
INI |
60 |
C642 |
60 |
EXT IO |
60 |
EXT IO |
60 |
init kybrd consl |
60 |
init kybrd consl |
60 |
Try to initialize USB keyboard. |
60 |
Try to initialize USB keyboard. |
60 |
<TABLE ROW> |
60 |
FLT |
60 |
C642 |
60 |
EXT IO |
60 |
EXT IO |
60 |
keyboard error |
60 |
keyboard error |
60 |
An error was detected trying to access the keyboard. |
60 |
An error was detected trying to access the keyboard. |
60 |
<TABLE ROW> |
60 |
WRN |
60 |
WRN |
60 |
C643 |
60 |
C643 |
60 |
EXT IO |
60 |
EXT IO |
60 |
keyboard reinit |
60 |
keyboard reinit |
60 |
Keyboard was re-initialized. |
60 |
<TABLE ROW> |
60 |
WRN |
60 |
C64F |
60 |
EXT IO |
60 |
EXT IO |
60 |
reset montr type |
60 |
reset montr type |
60 |
The console device failed to initialize with the given monitor type. Try again with type 1. |
60 |
The console device failed to initialize with the given monitor type. Try again with type 1. |
60 |
<TABLE ROW> |
61 |
TST |
61 |
C680 |
61 |
SYS BD |
61 |
SYS BD |
61 |
builtin graphics |
61 |
builtin graphics |
61 |
Look for built-in graphics card. |
61 |
<TABLE ROW> |
61 |
TST |
61 |
C68s |
61 |
SYS BD |
61 |
SYS BD |
61 |
test graph in s |
61 |
test graph in |
61 |
Look for graphics card in PCI slot s. |
61 |
Look for graphics card in PCI slot |
61 |
<TABLE ROW> |
61 |
INI |
61 |
C68s |
61 |
SYS BD |
61 |
SYS BD |
61 |
init graph in s |
61 |
init graph in s |
61 |
Successfully initialized graphics card in PCI slot s. |
61 |
<TABLE ROW> |
61 |
INI |
61 |
C680 |
61 |
SYS BD |
61 |
SYS BD |
61 |
bultin graphics |
61 |
bultin graphics |
61 |
Successfully initialized built-in graphics card. |
61 |
Successfully initialized built-in graphics card. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
C680 |
61 |
SYS BD |
61 |
SYS BD |
61 |
bultin graphics |
61 |
bultin graphics |
61 |
built-in graphics initialization failed. |
61 |
built-in graphics initialization failed. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
C68s |
61 |
SYS BD |
61 |
SYS BD |
61 |
fail graph in s |
61 |
fail graph in |
61 |
Card in PCI slot s failed graphics initialization or is not a graphics card. |
61 |
Card in PCI slot |
61 |
<TABLE ROW> |
61 |
INI |
61 |
C740 |
61 |
EXT IO |
61 |
EXT IO |
61 |
init other path |
61 |
init other path |
61 |
Autoboot is trying to boot from non-primary boot device. |
61 |
Autoboot is trying to boot from non-primary boot device. |
61 |
<TABLE ROW> |
61 |
INI |
61 |
INI |
61 |
C780 |
61 |
EXT IO |
61 |
EXT IO |
61 |
ld IPL othr path |
61 |
ld IPL othr path |
61 |
Loading IPL from non-primary boot device. |
61 |
Loading IPL from non-primary boot device. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
C7F0 |
61 |
EXT IO |
61 |
EXT IO |
61 |
other IPL fault |
61 |
other IPL fault |
61 |
Error loading IPL from non-primary boot device. |
61 |
Error loading IPL from non-primary boot device. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
C7F1 |
61 |
EXT IO |
61 |
EXT IO |
61 |
bad alt IPL read |
61 |
bad alt IPL read |
61 |
Cannot load IPL from non-primary boot device--load address invalid. |
61 |
Cannot load IPL from non-primary boot device--load address invalid. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
C7F2 |
61 |
EXT IO |
61 |
EXT IO |
61 |
bad alt IPL read |
61 |
bad alt IPL read |
61 |
Cannot load IPL from non-primary boot device--file is not IPL image. |
61 |
Cannot load IPL from non-primary boot device--file is not IPL image. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
C7F3 |
61 |
EXT IO |
61 |
EXT IO |
61 |
bad alt IPL read |
61 |
bad alt IPL read |
61 |
Cannot load IPL from non-primary boot device--IPL image size invalid. |
61 |
Cannot load IPL from non-primary boot device--IPL image size invalid. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
C7F4 |
61 |
EXT IO |
61 |
EXT IO |
61 |
bad alt IPL read |
61 |
bad alt IPL read |
61 |
Cannot load IPL from non-primary boot device--IPL entry point address invalid. |
61 |
Cannot load IPL from non-primary boot device--IPL entry point address invalid. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
C7F8 |
61 |
EXT IO |
61 |
EXT IO |
61 |
bad alt IPL read |
61 |
bad alt IPL read |
61 |
Cannot load IPL from non-primary boot device--IPL image checksum failed. |
61 |
Cannot load IPL from non-primary boot device--IPL image checksum failed. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
C7FF |
61 |
<blank> |
61 |
launch IPL other |
61 |
launch IPL other |
61 |
Booting from a device other than the primary boot path. |
61 |
Booting from a device other than the primary boot path. |
61 |
<TABLE ROW> |
61 |
INI |
61 |
CB00 |
61 |
SYS BD |
61 |
SYS BD |
61 |
TOC initiated |
61 |
TOC initiated |
61 |
A Transfer of Control entered the firmware TOC handler. |
61 |
A Transfer of Control entered the firmware TOC handler. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
CB01 |
61 |
SYS BD |
61 |
SYS BD |
61 |
no OS TOC vector |
61 |
no OS TOC vector |
61 |
There is no TOC vector for the operating system. Firmware will soft boot the system. |
61 |
There is no TOC vector for the operating system. Firmware will soft boot the system. |
61 |
<TABLE ROW> |
61 |
WRN |
61 |
CB02 |
61 |
SYS BD |
61 |
SYS BD |
61 |
bad OS TOC addr |
61 |
bad OS TOC addr |
61 |
The operating system TOC handler vector is invalid. Firmware will soft boot the system. |
61 |
The operating system TOC handler vector is invalid. Firmware will soft boot the system. |
61 |
<TABLE ROW> |
62 |
WRN |
62 |
CB03 |
62 |
SYS BD |
62 |
SYS BD |
62 |
bad OS TOC code |
62 |
bad OS TOC code |
62 |
The operating system TOC handler is invalid. Firmware will soft boot the system. |
62 |
The operating system TOC handler is invalid. Firmware will soft boot the system. |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB04 |
62 |
SYS BD |
62 |
SYS BD |
62 |
bad OS TOC len |
62 |
bad OS TOC len |
62 |
The size of the operating system TOC handler is invalid. Firmware will soft boot the system. |
62 |
The size of the operating system TOC handler is invalid. Firmware will soft boot the system. |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB05 |
62 |
CB05 |
62 |
SYS BD |
62 |
SYS BD |
62 |
bad OS TOC chksm |
62 |
bad OS TOC chksm |
62 |
The operating system TOC handler failed the checksum test. Firmware will soft boot the system. |
62 |
The operating system TOC handler failed the checksum test. Firmware will soft boot the system. |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB0A |
62 |
SYS BD |
62 |
SYS BD |
62 |
prev TOC logged |
62 |
prev TOC logged |
62 |
Firmware detected unread PIM data from a previous TOC and will not overwrite it. (PIM for this TO... |
62 |
Firmware detected unread PIM data from a previous TOC and will not overwrite it. (PIM for this TO... |
62 |
<TABLE ROW> |
62 |
INI |
62 |
CB0B |
62 |
SYS BD |
62 |
SYS BD |
62 |
branch to OS TOC |
62 |
branch to OS TOC |
62 |
Branching to the operating system TOC handler. |
62 |
Branching to the operating system TOC handler. |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB0C |
62 |
SYS BD |
62 |
SYS BD |
62 |
br OS TOC failed |
62 |
br OS TOC failed |
62 |
Branch to the operating system TOC handler failed. Firmware will soft boot the system. |
62 |
Branch to the operating system TOC handler failed. Firmware will soft boot the system. |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB10 |
62 |
SYS BD |
62 |
SYS BD |
62 |
LPMC initiated |
62 |
LPMC initiated |
62 |
A Low-Priority Machine Check entered the firmware LPMC handler. The handler should log the error ... |
62 |
A Low-Priority Machine Check entered the firmware LPMC handler. The handler should log the error ... |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB11 |
62 |
SYS BD |
62 |
SYS BD |
62 |
icache LPMC err |
62 |
An instruction cache parity error caused the LPMC. |
62 |
An instruction cache parity error caused the LPMC. |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB12 |
62 |
SYS BD |
62 |
SYS BD |
62 |
dcache LPMC err |
62 |
dcache LPMC err |
62 |
A data cache parity/ECC error caused the LPMC. |
62 |
A data cache parity/ECC error caused the LPMC. |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB13 |
62 |
SYS BD |
62 |
SYS BD |
62 |
dcache tag error |
62 |
dcache tag error |
62 |
The parity error is in the tag portion of the data cache. |
62 |
The parity error is in the tag portion of the data cache. |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB14 |
62 |
SYS BD |
62 |
SYS BD |
62 |
dcache data err |
62 |
dcache data err |
62 |
The parity error is in the data portion of the data cache. |
62 |
The parity error is in the data portion of the data cache. |
62 |
<TABLE ROW> |
62 |
FLT |
62 |
CB1F |
62 |
SYS BD |
62 |
SYS BD |
62 |
OS LPMC failed |
62 |
OS LPMC failed |
62 |
Firmware couldn’t branch to the operating system LPMC handler. It will halt the CPU, requiring a ... |
62 |
Firmware couldn’t branch to the operating system LPMC handler. It will halt the CPU, requiring a ... |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB71 |
62 |
SYS BD |
62 |
SYS BD |
62 |
HPMC occurred |
62 |
HPMC occurred |
62 |
A High-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler). |
62 |
A High-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler). |
62 |
<TABLE ROW> |
62 |
WRN |
62 |
CB72 |
62 |
SYS BD |
62 |
SYS BD |
62 |
LPMC occurred |
62 |
LPMC occurred |
62 |
A Low-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler). |
62 |
A Low-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler). |
62 |
<TABLE ROW> |
63 |
WRN |
63 |
CB73 |
63 |
SYS BD |
63 |
SYS BD |
63 |
TOC occurred |
63 |
TOC occurred |
63 |
A Transfer of Control caused entry to PDCE_CHECK (the firmware trap handler). |
63 |
A Transfer of Control caused entry to PDCE_CHECK (the firmware trap handler). |
63 |
<TABLE ROW> |
63 |
FLT |
63 |
CB9r |
63 |
IO BD |
63 |
IO BD |
63 |
Error on roper |
63 |
Error on rope |
63 |
An error was detected on rope r. |
63 |
An error was detected on rope |
63 |
<TABLE ROW> |
63 |
FLT |
63 |
CB99 |
63 |
SYS BD |
63 |
SYS BD |
63 |
seed IVA handler |
63 |
seed IVA handler |
63 |
PDC_SEED_ERROR triggered an HPMC. |
63 |
PDC_SEED_ERROR triggered an HPMC. |
63 |
<TABLE ROW> |
63 |
FLT |
63 |
CB9A |
63 |
SYS BD |
63 |
SYS BD |
63 |
HPMC overwrite |
63 |
HPMC overwrite |
63 |
Firmware is overwriting PIM data from a previous HPMC. |
63 |
Firmware is overwriting PIM data from a previous HPMC. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBA1 |
63 |
SYS BD |
63 |
SYS BD |
63 |
AIOC int dat err |
63 |
AIOC int dat err |
63 |
I/O controller internal error. |
63 |
I/O controller internal error. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBA2 |
63 |
IO BD |
63 |
IO BD |
63 |
EtoA rope perr |
63 |
EtoA rope perr |
63 |
Parity error between I/O controller and Rope-to-PCI bridge. |
63 |
Parity error between I/O controller and Rope-to-PCI bridge. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBA3 |
63 |
SYS BD |
63 |
SYS BD |
63 |
access invld TLB |
63 |
access invld TLB |
63 |
An invalid I/O TLB entry was accessed. |
63 |
An invalid I/O TLB entry was accessed. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBA4 |
63 |
IO BD |
63 |
IO BD |
63 |
EtoA rp cmd perr |
63 |
EtoA rp cmd perr |
63 |
Command parity error between I/O controller and Rope-to-PCI bridge. |
63 |
Command parity error between I/O controller and Rope-to-PCI bridge. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBA5 |
63 |
IO BD |
63 |
IO BD |
63 |
CDF timeout |
63 |
CDF timeout |
63 |
Rope Command/Data FIFO is backed up. |
63 |
Rope Command/Data FIFO is backed up. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBA6 |
63 |
IO BD |
63 |
IO BD |
63 |
R2PCI resp tmout |
63 |
R2PCI resp tmout |
63 |
Rope-to-PCI bridge timed out. Could be a failure of the PCI card, rope, or R2PCI bridge. |
63 |
Rope-to-PCI bridge timed out. Could be a failure of the PCI card, rope, or R2PCI bridge. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBA7 |
63 |
IO BD |
63 |
IO BD |
63 |
Unknown AIOC err |
63 |
Unknown AIOC err |
63 |
Unknown I/O controller error. |
63 |
Unknown I/O controller error. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBB1 |
63 |
IO BD |
63 |
IO BD |
63 |
PCI timeout |
63 |
PCI timeout |
63 |
A PCI card requested the bus but failed to use it. |
63 |
A PCI card requested the bus but failed to use it. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBB2 |
63 |
IO BD |
63 |
IO BD |
63 |
PCI timeout; OV |
63 |
PCI timeout; OV |
63 |
More than once aPCI card requested the bus but failed to use it. |
63 |
More than once aPCI card requested the bus but failed to use it. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBB3 |
63 |
IO BD |
63 |
IO BD |
63 |
R2PCI intrnl err |
63 |
R2PCI intrnl err |
63 |
Rope-to-PCI bridge internal error. |
63 |
Rope-to-PCI bridge internal error. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBB4 |
63 |
IO BD |
63 |
IO BD |
63 |
R2PCI int err;OV |
63 |
R2PCI int err;OV |
63 |
Multiple Rope-to-PCI bridge internal errors. |
63 |
Multiple Rope-to-PCI bridge internal errors. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBB6 |
63 |
IO BD |
63 |
IO BD |
63 |
PCI data req err |
63 |
PCI data req err |
63 |
PCI bus data requestor error: R2PCI detected PERR# assertion. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBB8 |
63 |
IO BD |
63 |
IO BD |
63 |
PCI D req err;OV |
63 |
PCI D req err;OV |
63 |
Rope-to-PCI bridge detected multiple PERR# assertions. |
63 |
Rope-to-PCI bridge detected multiple PERR# assertions. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBBA |
63 |
IO BD |
63 |
IO BD |
63 |
PCI data par err |
63 |
PCI bus data parity error. |
63 |
PCI bus data parity error. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBBC |
63 |
IO BD |
63 |
IO BD |
63 |
PCI Dpar err;OV |
63 |
PCI Dpar err;OV |
63 |
Multiple PCI bus data parity errors. |
63 |
Multiple PCI bus data parity errors. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBBE |
63 |
IO BD |
63 |
IO BD |
63 |
R2PCI intrnl err |
63 |
R2PCI intrnl err |
63 |
Error in R2PCI internal data to PCI bus. |
63 |
Error in R2PCI internal data to PCI bus. |
63 |
<TABLE ROW> |
63 |
OFF |
63 |
CBC0 |
63 |
IO BD |
63 |
IO BD |
63 |
R2PCI int err;OV |
63 |
R2PCI int err;OV |
63 |
Multiple R2PCI internal data to PCI bus errors. |
63 |
Multiple R2PCI internal data to PCI bus errors. |
63 |
<TABLE ROW> |
64 |
OFF |
64 |
CBC2 |
64 |
IO BD |
64 |
IO BD |
64 |
PCI data parity |
64 |
PCI data parity |
64 |
PCI data parity error. I/O error log word 3 contains the error address. |
64 |
PCI data parity error. I/O error log word 3 contains the error address. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBC4 |
64 |
IO BD |
64 |
IO BD |
64 |
PCI data par; OV |
64 |
PCI data par; OV |
64 |
Multiple PCI data parity errors. I/O error log word 3 contains the error address. |
64 |
Multiple PCI data parity errors. I/O error log word 3 contains the error address. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBC6 |
64 |
IO BD |
64 |
IO BD |
64 |
R2PCI intrnl err |
64 |
R2PCI intrnl err |
64 |
Rope-to-PCI bridge internal data error: R2PCI detected PERR# assertion. |
64 |
Rope-to-PCI bridge internal data error: R2PCI detected PERR# assertion. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBC8 |
64 |
IO BD |
64 |
IO BD |
64 |
R2PCI int err;OV |
64 |
R2PCI int err;OV |
64 |
Multiple R2PCI internal data errors: R2PCI detected multiple PERR# assertions. |
64 |
Multiple R2PCI internal data errors: R2PCI detected multiple PERR# assertions. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBCA |
64 |
IO BD |
64 |
IO BD |
64 |
PCI data rs err |
64 |
PCI data rs err |
64 |
PCI bus data responder error: R2PCI detected PERR# assertion. |
64 |
PCI bus data responder error: R2PCI detected PERR# assertion. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBCC |
64 |
IO BD |
64 |
IO BD |
64 |
PCI D rs err; OV |
64 |
PCI D rs err; OV |
64 |
Multiple PCI bus data responder errors: R2PCI detected multiple PERR# assertions. |
64 |
Multiple PCI bus data responder errors: R2PCI detected multiple PERR# assertions. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBCE |
64 |
IO BD |
64 |
IO BD |
64 |
R2PCI T-Abort |
64 |
R2PCI T-Abort |
64 |
Rope-to-PCI bridge signalled Target Abort. |
64 |
Rope-to-PCI bridge signalled Target Abort. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBD0 |
64 |
IO BD |
64 |
IO BD |
64 |
R2PCI T-Abort;OV |
64 |
R2PCI T-Abort;OV |
64 |
Rope-to-PCI bridge signalled multiple Target Aborts. |
64 |
Rope-to-PCI bridge signalled multiple Target Aborts. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBD2 |
64 |
IO BD |
64 |
IO BD |
64 |
PCI parity err |
64 |
PCI parity err |
64 |
PCI address/command parity error. |
64 |
PCI address/command parity error. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBD4 |
64 |
IO BD |
64 |
IO BD |
64 |
PCI par err; OV |
64 |
PCI par err; OV |
64 |
Multiple PCI address/command parity errors. |
64 |
Multiple PCI address/command parity errors. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBD6 |
64 |
IO BD |
64 |
IO BD |
64 |
PCI no DEVSEL# |
64 |
PCI no DEVSEL# |
64 |
No PCI device selected (DEVSEL# assertion). I/O error log word 3 contains the error address. |
64 |
No PCI device selected (DEVSEL# assertion). I/O error log word 3 contains the error address. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBD8 |
64 |
IO BD |
64 |
IO BD |
64 |
PCI no DEVSEL;OV |
64 |
PCI no DEVSEL;OV |
64 |
Multiple DEVSEL# assertions. I/O error log word 3 contains the error address. |
64 |
Multiple DEVSEL# assertions. I/O error log word 3 contains the error address. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBDA |
64 |
IO BD |
64 |
IO BD |
64 |
PCI target abort |
64 |
PCI target abort |
64 |
A PCI device signalled Target Abort. I/O error log word 3 contains the error address. |
64 |
A PCI device signalled Target Abort. I/O error log word 3 contains the error address. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBDC |
64 |
IO BD |
64 |
IO BD |
64 |
PCI T-Abort; OV |
64 |
PCI T-Abort; OV |
64 |
A PCI device signalled multiple Target Aborts. I/O error log word 3 contains the error address. |
64 |
A PCI device signalled multiple Target Aborts. I/O error log word 3 contains the error address. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBDD |
64 |
IO BD |
64 |
IO BD |
64 |
PCI assrts LOCK# |
64 |
PCI assrts LOCK# |
64 |
A PCI device asserted LOCK#. |
64 |
A PCI device asserted LOCK#. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBDE |
64 |
IO BD |
64 |
IO BD |
64 |
PCI LOCK#; OV |
64 |
PCI LOCK#; OV |
64 |
A PCI device asserted LOCK# multiple times. |
64 |
A PCI device asserted LOCK# multiple times. |
64 |
<TABLE ROW> |
64 |
OFF |
64 |
CBE0 |
64 |
IO BD |
64 |
IO BD |
64 |
PCI assrts SERR# |
64 |
PCI assrts SERR# |
64 |
A PCI device asserted SERR#: address parity error or other system error. |
64 |
A PCI device asserted SERR#: address parity error or other system error. |
64 |
<TABLE ROW> |
65 |
OFF |
65 |
CBE2 |
65 |
IO BD |
65 |
IO BD |
65 |
PCI SERR#; OV |
65 |
PCI SERR#; OV |
65 |
A PCI device asserted SERR# multiple times. |
65 |
A PCI device asserted SERR# multiple times. |
65 |
<TABLE ROW> |
65 |
OFF |
65 |
CBE3 |
65 |
IO BD |
65 |
IO BD |
65 |
Unknown PCI err |
65 |
Unknown PCI err |
65 |
Unknown PCI error detected. |
65 |
Unknown PCI error detected. |
65 |
<TABLE ROW> |
65 |
OFF |
65 |
CBE6 |
65 |
SYS BD |
65 |
SYS BD |
65 |
AtoE rope perr |
65 |
AtoE rope perr |
65 |
Parity error between system I/O controller and Rope-to-PCI bridge. |
65 |
Parity error between system I/O controller and Rope-to-PCI bridge. |
65 |
<TABLE ROW> |
65 |
OFF |
65 |
CBE7 |
65 |
IO BD |
65 |
IO BD |
65 |
R2PCI intrnl err |
65 |
R2PCI intrnl err |
65 |
Rope-to-PCI bridge internal data error. |
65 |
Rope-to-PCI bridge internal data error. |
65 |
<TABLE ROW> |
65 |
OFF |
65 |
CBE8 |
65 |
SYS BD |
65 |
SYS BD |
65 |
AtoE rope perr |
65 |
AtoE rope perr |
65 |
Command parity error between system I/O controller and Rope-to-PCI bridge. |
65 |
Command parity error between system I/O controller and Rope-to-PCI bridge. |
65 |
<TABLE ROW> |
65 |
OFF |
65 |
CBE9 |
65 |
IO BD |
65 |
IO BD |
65 |
Unknown Rope err |
65 |
Unknown Rope err |
65 |
Unknown rope error occurred. |
65 |
Unknown rope error occurred. |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBF0 |
65 |
SYS BD |
65 |
SYS BD |
65 |
HPMC initiated |
65 |
HPMC initiated |
65 |
A High-Priority Machine Check entered the firmware HPMC handler. |
65 |
A High-Priority Machine Check entered the firmware HPMC handler. |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBF1 |
65 |
SYS BD |
65 |
SYS BD |
65 |
no OS HPMC IVA |
65 |
no OS HPMC IVA |
65 |
There is no HPMC vector for the operating system. Firmware will halt the CPU, requiring a power c... |
65 |
There is no HPMC vector for the operating system. Firmware will halt the CPU, requiring a power c... |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBF2 |
65 |
SYS BD |
65 |
SYS BD |
65 |
bad OS HPMC len |
65 |
bad OS HPMC len |
65 |
The size of the operating system HPMC handler is invalid. Firmware will halt the CPU, requiring a... |
65 |
The size of the operating system HPMC handler is invalid. Firmware will halt the CPU, requiring a... |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBF3 |
65 |
SYS BD |
65 |
SYS BD |
65 |
bad OS HPMC addr |
65 |
bad OS HPMC addr |
65 |
The operating system HPMC handler vector is invalid. Firmware will halt the CPU, requiring a powe... |
65 |
The operating system HPMC handler vector is invalid. Firmware will halt the CPU, requiring a powe... |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBF4 |
65 |
SYS BD |
65 |
SYS BD |
65 |
bad OS HPMC cksm |
65 |
bad OS HPMC cksm |
65 |
The operating system HPMC handler failed the checksum test. Firmware will halt the CPU, requiring... |
65 |
The operating system HPMC handler failed the checksum test. Firmware will halt the CPU, requiring... |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBF5 |
65 |
SYS BD |
65 |
SYS BD |
65 |
OS HPMC vector 0 |
65 |
OS HPMC vector 0 |
65 |
The size of the operating system HPMC handler is zero. Firmware will halt the CPU, requiring a po... |
65 |
The size of the operating system HPMC handler is zero. Firmware will halt the CPU, requiring a po... |
65 |
<TABLE ROW> |
65 |
WRN |
65 |
CBFA |
65 |
SYS BD |
65 |
SYS BD |
65 |
prev HPMC logged |
65 |
prev HPMC logged |
65 |
Firmware detected unread PIM data from a previous HPMC and will overwrite it. |
65 |
Firmware detected unread PIM data from a previous HPMC and will overwrite it. |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBFB |
65 |
SYS BD |
65 |
SYS BD |
65 |
brnch to OS HPMC |
65 |
brnch to OS HPMC |
65 |
Branching to the operating system HPMC handler. |
65 |
Branching to the operating system HPMC handler. |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBFC |
65 |
SYS BD |
65 |
SYS BD |
65 |
OS HPMC br err |
65 |
OS HPMC br err |
65 |
Branch to the operating system HPMC handler failed. Firmware will halt the CPU, requiring a power... |
65 |
Branch to the operating system HPMC handler failed. Firmware will halt the CPU, requiring a power... |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBFD |
65 |
SYS BD |
65 |
SYS BD |
65 |
unknown check |
65 |
unknown check |
65 |
The firmware trap handler didn’t detect an HPMC, LPMC, or TOC. |
65 |
The firmware trap handler didn’t detect an HPMC, LPMC, or TOC. |
65 |
<TABLE ROW> |
65 |
FLT |
65 |
CBFE |
65 |
SYS BD |
65 |
SYS BD |
65 |
HPMC during TOC |
65 |
HPMC during TOC |
65 |
A High-Priority Machine Check occurred during Transfer of Control processing. |
65 |
A High-Priority Machine Check occurred during Transfer of Control processing. |
65 |
<TABLE ROW> |
66 |
FLT |
66 |
CBFF |
66 |
SYS BD |
66 |
SYS BD |
66 |
multiple HPMCs |
66 |
multiple HPMCs |
66 |
A High-Priority Machine Check occurred while processing another HPMC. |
66 |
A High-Priority Machine Check occurred while processing another HPMC. |
66 |
<TABLE ROW> |
66 |
INI |
66 |
CC0n |
66 |
SYS BD |
66 |
SYS BD |
66 |
CPUn OS rendezvs |
66 |
CPU |
66 |
Slave CPU n entering the final rendezvous, waiting for the operating system to awaken it. |
66 |
Slave CPU |
66 |
<TABLE ROW> |
66 |
INI |
66 |
CC1n |
66 |
SYS BD |
66 |
CPUn early rend |
66 |
CPU |
66 |
Slave CPU n entering the early rendezvous, waiting for the monarch CPU to initialize scratch RAM ... |
66 |
Slave CPU |
66 |
<TABLE ROW> |
66 |
INI |
66 |
CC2n |
66 |
SYS BD |
66 |
SYS BD |
66 |
CPUn rendezvous |
66 |
CPU |
66 |
Slave CPU n entering rendezvous. Slave CPUs enter this rendezvous numerous times during boot. |
66 |
Slave CPU |
66 |
<TABLE ROW> |
66 |
INI |
66 |
CC3n |
66 |
SYS BD |
66 |
SYS BD |
66 |
CPUn cache rend |
66 |
CPU |
66 |
Slave CPU n entering cached rendezvous, waiting for the monarch CPU to configure the system bus. |
66 |
Slave CPU |
66 |
<TABLE ROW> |
66 |
INI |
66 |
CC4n |
66 |
SYS BD |
66 |
SYS BD |
66 |
CPUn mem rendez |
66 |
CPU |
66 |
Slave CPU n entering memory rendezvous, waiting for the monarch CPU to select a boot device. |
66 |
Slave CPU |
66 |
<TABLE ROW> |
66 |
TST |
66 |
D000 |
66 |
SYS BD |
66 |
SYS BD |
66 |
micro controller |
66 |
Firmware is initializing communications with the system controller. |
66 |
Firmware is initializing communications with the system controller. |
66 |
<TABLE ROW> |
66 |
WRN |
66 |
D004 |
66 |
SYS BD |
66 |
SYS BD |
66 |
micro not resp |
66 |
micro not resp |
66 |
Firmware detected a communications error with the system controller. |
66 |
Firmware detected a communications error with the system controller. |
66 |
<TABLE ROW> |
66 |
INI |
66 |
D005 |
66 |
SYS BD |
66 |
SYS BD |
66 |
set dom1 fan spd |
66 |
set dom1 fan spd |
66 |
Firmware is initializing communications with the system controller. |
66 |
Firmware is initializing communications with the system controller. |
66 |
<TABLE ROW> |
66 |
INI |
66 |
D006 |
66 |
SYS BD |
66 |
SYS BD |
66 |
set dom2 fan spd |
66 |
Firmware is initializing communications with the system controller. |
66 |
Firmware is initializing communications with the system controller. |
66 |
<TABLE ROW> |
66 |
WRN |
66 |
D007 |
66 |
SYS BD |
66 |
SYS BD |
66 |
bad microctl cmd |
66 |
bad microctl cmd |
66 |
Firmware detected a communications error with the system controller. |
66 |
Firmware detected a communications error with the system controller. |
66 |
<TABLE ROW> |
66 |
FLT |
66 |
D01n |
66 |
SYS/IO |
66 |
SYS/IO |
66 |
fan n: failure! |
66 |
fan |
66 |
Firmware detected system fan n stopped. |
66 |
Firmware detected system fan |
66 |
<TABLE ROW> |
66 |
WRN |
66 |
D02n |
66 |
SYS/IO |
66 |
SYS/IO |
66 |
fan n: too slow! |
66 |
fan |
66 |
Firmware detected system fan n is running too slowly. |
66 |
Firmware detected system fan |
66 |
Running System Verification Tests |
67 |
Running System Verification Tests |
67 |
HP-UX uses an online diagnostics product called the Support Tools Manager that allows system oper... |
67 |
Three interfaces are available with the Support Tools Manager: a command line interface (accessed... |
67 |
For more information on these user interfaces, see the online man pages by entering the following... |
67 |
man cstm [Enter] |
67 |
man cstm [Enter] |
67 |
man mstm [Enter] |
67 |
man xstm [Enter] |
67 |
For information on the enhanced online diagnostics, see the Support Media User’s Manual (HP Part ... |
67 |
To access the Support Tools Manager, perform the following steps: |
67 |
1. In a terminal window, type the following at the # prompt to invoke the command line interface:... |
67 |
1. In a terminal window, type the following at the # prompt to invoke the command line interface:... |
67 |
2. The following message appears: |
67 |
3. To verify the system operation, type the following at the |
67 |
4. Press |
67 |
5. To exit the Support Tools Manager, enter the following: |
67 |
|
67 |
If any tests failed, run Selftest and ISL diagnostics to isolate the problem. |
67 |
Tests:ODE-based diagnostics |
68 |
Tests:ODE-based diagnostics |
68 |
Tests:ODE-based diagnostics |
68 |
Troubleshooting:ODE-based diagnostics |
68 |
J5000/J7000 workstation:ODE-based diagnostics |
68 |
ODE-based diagnostics |
68 |
Diagnostics, ODE-based |
68 |
Running:ODE-based diagnostics |
68 |
The Offline Diagnostic Environment (ODE) consists of diagnostic modules for testing and verifying... |
68 |
ODE is an ISL utility. To boot ODE: |
68 |
1. Invoke the ISL environment from the system disk or a CD ROM. |
68 |
1. Invoke the ISL environment from the system disk or a CD ROM. |
68 |
2. Type |
68 |
Not all of the test modules are available on all systems. To see what test modules are available ... |
68 |
• astrodiag |
68 |
• astrodiag |
68 |
• astrodiag |
68 |
• siodiag |
68 |
• siodiag |
68 |
• wdiag |
68 |
• wdiag |
68 |
• memtest |
68 |
• memtest |
68 |
• fupdate – updates the system’s Processor Dependent Code (PDC) firmware in the EEPROM. |
68 |
• mapper |
68 |
• mapper |
68 |
For further information on the various ODE commands and a complete listing of the command set, type |
68 |
Using the System Board LEDs for Troubleshooting |
69 |
Using the System Board LEDs for Troubleshooting |
69 |
This section provides a description of the system board’s Light Emitting Diodes (LEDs) and how to... |
69 |
NOTE The SUPPLY LED is not currently implemented. Therefore, it does not provide any troubleshoot... |
69 |
NOTE The SUPPLY LED is not currently implemented. Therefore, it does not provide any troubleshoot... |
69 |
Figure25. System Board LEDs |
69 |
Figure25. System Board LEDs |
69 |
<GRAPHIC> |
69 |
Interpreting the LED Information |
69 |
Interpreting the LED Information |
69 |
Table 22. |
69 |
Table 22. |
69 |
<TABLE> |
69 |
Table22. Interpreting the System Board LEDs |
69 |
<TABLE HEADING> |
69 |
<TABLE ROW> |
69 |
LED Name |
69 |
LED Name |
69 |
LED’s Color When On |
69 |
LED’s Color When On |
69 |
Description |
69 |
Description |
69 |
<TABLE BODY> |
69 |
<TABLE ROW> |
69 |
VRM1 |
69 |
VRM1 |
69 |
Green |
69 |
Green |
69 |
This light, when on, indicates that the voltage regulator module is working correctly for process... |
69 |
This light, when on, indicates that the voltage regulator module is working correctly for process... |
69 |
<TABLE ROW> |
70 |
VRM0 |
70 |
VRM0 |
70 |
Green |
70 |
Green |
70 |
This light, when on, indicates that the voltage regulator module is working correctly for process... |
70 |
This light, when on, indicates that the voltage regulator module is working correctly for process... |
70 |
<TABLE ROW> |
70 |
FETCH |
70 |
FETCH |
70 |
Green |
70 |
Green |
70 |
This light, when on, indicates that one or both processors is fetching code. The default state fo... |
70 |
This light, when on, indicates that one or both processors is fetching code. The default state fo... |
70 |
<TABLE ROW> |
70 |
FANS |
70 |
FANS |
70 |
Yellow (blinking) |
70 |
Yellow (blinking) |
70 |
Note that the yellow light blinks a heart beat when the system is working correctly. See Table 2... |
70 |
Note that the yellow light blinks a heart beat when the system is working correctly. See |
70 |
<TABLE ROW> |
70 |
Over Current |
70 |
Over Current |
70 |
Red |
70 |
Red |
70 |
This light, when on, indicates there is a short somewhere in the system. The default state for th... |
70 |
This light, when on, indicates there is a short somewhere in the system. The default state for th... |
70 |
There are six LED blink sequences supported by the System Controller. The LED blink sequences are... |
70 |
If the FANS LED is ever stuck either ON or OFF, a system problem has occurred. This system proble... |
70 |
<TABLE> |
70 |
Table23. Blink Sequences for the FANS LED |
70 |
<TABLE HEADING> |
70 |
<TABLE ROW> |
70 |
Blink Sequence Number |
70 |
Blink Sequence Number |
70 |
LED Blink Sequence (black dot represents 0.1 second LED on; white dot is 0.1 second LED is off) |
70 |
LED Blink Sequence (black dot represents 0.1 second LED on; white dot is 0.1 second LED is off) |
70 |
Description |
70 |
Description |
70 |
<TABLE BODY> |
70 |
<TABLE ROW> |
70 |
System Controller Non-error Blink Sequences |
70 |
System Controller Non-error Blink Sequences |
70 |
<TABLE ROW> |
70 |
1 |
70 |
1 |
70 |
l m l m m m m m m m |
70 |
l m l m m m m m m m |
70 |
System controllers normal heart beat. |
70 |
System controllers normal heart beat. |
70 |
<TABLE ROW> |
70 |
2 |
70 |
2 |
70 |
l l l l l m m m m m |
70 |
l l l l l m m m m m |
70 |
This is a transient state shown by the system controller at power up. |
70 |
<TABLE ROW> |
70 |
3 |
70 |
l l l l l l l l l l m m m m m m m m m m |
70 |
l l l l l l l l l l m m m m m m m m m m |
70 |
System controller’s transient state. There is no system problem. |
70 |
<TABLE ROW> |
71 |
System Controller Error Blink Sequences |
71 |
System Controller Error Blink Sequences |
71 |
<TABLE ROW> |
71 |
4 |
71 |
4 |
71 |
l m m m m m m m m m |
71 |
l m m m m m m m m m |
71 |
System controller shut off power to the system because the ambient temperature exceeded 60C or 1... |
71 |
System controller shut off power to the system because the ambient temperature exceeded 60C or 1... |
71 |
<TABLE ROW> |
71 |
5 |
71 |
5 |
71 |
l l l l l l l l l m |
71 |
l l l l l l l l l m |
71 |
System controller detects a fan failure. If this happens you need to read the message in the LCD ... |
71 |
System controller detects a fan failure. If this happens you need to read the message in the LCD ... |
71 |
<TABLE ROW> |
71 |
6 |
71 |
6 |
71 |
l m l m l m m m m m |
71 |
l m l m l m m m m m |
71 |
System controller is reporting an error. |
71 |
System controller is reporting an error. |
71 |
Troubleshooting with System Board LEDs |
71 |
Troubleshooting with System Board LEDs |
71 |
This section explains what to do when you see the LEDs on your system board in a non-default stat... |
71 |
<TABLE> |
71 |
Table24. Solutions for the Non-Default LED States |
71 |
<TABLE HEADING> |
71 |
<TABLE ROW> |
71 |
LED Name |
71 |
LED Name |
71 |
Non-Default State |
71 |
Non-Default State |
71 |
Solution |
71 |
Solution |
71 |
<TABLE BODY> |
71 |
<TABLE ROW> |
71 |
VRM1 |
71 |
OFF |
71 |
OFF |
71 |
If the following solutions do not bring this LED back on, replace VRM1 board. |
71 |
If the following solutions do not bring this LED back on, replace VRM1 board. |
71 |
• Swap VRM cards to determine if VRM1 is bad |
71 |
• Swap VRM cards to determine if VRM1 is bad |
71 |
• Determine that the power cable to the system is plugged in |
71 |
• Check that the power button has been pressed on |
71 |
• Re-seat the VRM1 board in its connector |
71 |
• Check that the VRM1 connector cable is properly plugged in |
71 |
<TABLE ROW> |
72 |
VRM0 |
72 |
VRM0 |
72 |
OFF |
72 |
OFF |
72 |
If the following solutions do not bring this LED back on, replace VRM0 board. |
72 |
If the following solutions do not bring this LED back on, replace VRM0 board. |
72 |
• Swap VRM cards to determine if VRM0 is bad |
72 |
• Swap VRM cards to determine if VRM0 is bad |
72 |
• Determine that the power cable to the system is plugged in |
72 |
• Check that the power button has been pressed on |
72 |
• Re-seat the VRM0 board in its connector |
72 |
• Check that the VRM0 connector cable is properly plugged in |
72 |
<TABLE ROW> |
72 |
FETCH |
72 |
FETCH |
72 |
OFF |
72 |
OFF |
72 |
If the following solutions do not bring this LED back on, replace the system board. |
72 |
If the following solutions do not bring this LED back on, replace the system board. |
72 |
• Look at the system’s LCD to determine if the firmware update process has been interrupted |
72 |
• Look at the system’s LCD to determine if the firmware update process has been interrupted |
72 |
• Determine that the power cable to the system is plugged in |
72 |
• Check that the power button has been pressed on |
72 |
• Determine that all external peripheral devices are turned on and that their cables are properly... |
72 |
• Check that all internal devices are powered on and that their cables are properly connected |
72 |
<TABLE ROW> |
73 |
FANS |
73 |
FANS |
73 |
OFF or blink sequence 4, 5 or 6 |
73 |
If the following solutions do not bring the LED back on or cause it to properly blink, replace th... |
73 |
If the following solutions do not bring the LED back on or cause it to properly blink, replace th... |
73 |
OFF |
73 |
OFF |
73 |
OFF |
73 |
Unplug the system and replace the system board |
73 |
Blink Sequence 4 |
73 |
Blink Sequence 4 |
73 |
Unplug the system and operate the unit when its environment gets cooler |
73 |
Blink Sequence 5 |
73 |
Blink Sequence 5 |
73 |
Replace the fan associated with the message in your system LCD. If power supply fans are bad, you... |
73 |
Blink Sequence 6 |
73 |
Blink Sequence 6 |
73 |
Check that the 24-pin power supply signal cable is properly connected Press the power button off ... |
73 |
<TABLE ROW> |
73 |
SHORT |
73 |
SHORT |
73 |
ON |
73 |
ON |
73 |
If the following solutions do not turn this LED off, replace the system board. |
73 |
If the following solutions do not turn this LED off, replace the system board. |
73 |
• Check that no pieces of metal are shorting connections anywhere in the system |
73 |
• Check that no pieces of metal are shorting connections anywhere in the system |
73 |
• Check that no pins on system connectors are bent and touching each other |
73 |
3 System Upgrades |
75 |
3 System Upgrades |
75 |
This chapter discusses the system upgrades for the HP VISUALIZE J6700 workstations, and how to in... |
75 |
This chapter discusses the system upgrades for the HP VISUALIZE J6700 workstations, and how to in... |
75 |
Chapter Overview |
76 |
Chapter Overview |
76 |
This chapter contains the following main sections: |
76 |
• Tools Required |
76 |
• Tools Required |
76 |
• Exchange and Nonexchange Part Numbers |
76 |
• System Upgrades |
76 |
— Electrostatic Discharge (ESD) Precautions |
76 |
— Electrostatic Discharge (ESD) Precautions |
76 |
— Electrostatic Discharge (ESD) Precautions |
76 |
— Prerequisite for the System Upgrade Procedures |
76 |
— Front Bezel and Top Panel |
76 |
— Hard Disk Drives |
76 |
— CD ROM Drive |
76 |
— Memory DIMMs |
76 |
— I/O Cards |
76 |
WARNING For most of the installation and removal procedures in this chapter, you must power off t... |
76 |
WARNING For most of the installation and removal procedures in this chapter, you must power off t... |
76 |
NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and that all screws are ... |
76 |
NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and that all screws are ... |
76 |
Workstation Configurations |
76 |
Workstation Configurations |
76 |
Refer to the HP Workstations web site for a complete list of supported accessories, peripherals, ... |
76 |
http://www.hp.com/workstations |
76 |
Tools Required |
77 |
Tools Required |
77 |
Use the following tools to remove or replace system upgrades (for example, hard disk drives): |
77 |
• Light-duty flat blade screwdriver with 6-inch (150 mm) blade |
77 |
• Light-duty flat blade screwdriver with 6-inch (150 mm) blade |
77 |
• T-15 Torx and T-20 (for rack mounting) Torx drivers |
77 |
• ESD equipment (see the “Electrostatic Discharge (ESD) Precautions” section later in this chapte... |
77 |
System Upgrades |
78 |
System Upgrades |
78 |
The procedures in this section describe how to remove and replace J6700 workstation system upgrad... |
78 |
NOTE If you need to install a new system upgrade, simply follow the procedures for |
78 |
NOTE If you need to install a new system upgrade, simply follow the procedures for |
78 |
NOTE If you need to install a new system upgrade, simply follow the procedures for |
78 |
Electrostatic Discharge (ESD) Precautions |
78 |
Electrostatic Discharge (ESD) Precautions |
78 |
To prevent damage to the J6700 workstation, observe all of the following ESD precautions while pe... |
78 |
1. Remove all ESD-generating materials from the work area in which you will remove and replace a ... |
78 |
1. Remove all ESD-generating materials from the work area in which you will remove and replace a ... |
78 |
2. Stand on an ESD (static-free) mat. |
78 |
3. Wear a grounding wrist strap to ensure that any accumulated electrostatic charge discharges fr... |
78 |
4. Connect all equipment together, including the ESD mat, grounding wrist strap, workstation, and... |
78 |
5. Keep uninstalled printed circuit boards in their protective antistatic bags. |
78 |
6. Once you have removed printed circuit boards from their protective antistatic bags, handle the... |
78 |
Prerequisite for the System Upgrade Procedures |
79 |
Prerequisite for the System Upgrade Procedures |
79 |
You must complete the following steps before performing any of the installation and removal proce... |
79 |
1. Power off the workstation (either by executing |
79 |
1. Power off the workstation (either by executing |
79 |
2. Unplug the workstation power cord and all peripheral devices from AC power outlets. |
79 |
3. Attach the static-grounding wrist strap by following the instructions on the package. Attach t... |
79 |
NOTE To make access to the internal components easier, you may want to place the workstation on a... |
79 |
NOTE To make access to the internal components easier, you may want to place the workstation on a... |
79 |
CAUTION This workstation is designated for two-person lifting; it weighs approximately 36 to 49 p... |
79 |
CAUTION This workstation is designated for two-person lifting; it weighs approximately 36 to 49 p... |
79 |
Front Bezel and Top Cover |
80 |
Front Bezel and Top Cover |
80 |
This section describes how to install and remove the J6700 workstation’s front bezel and top cover. |
80 |
Note that you can perform certain operations, like installing and removing hard disk drives, by r... |
80 |
CAUTION The system will not operate with the top panel removed. |
80 |
CAUTION The system will not operate with the top panel removed. |
80 |
Removing the Top Cover |
81 |
Removing the Top Cover |
81 |
Figure31. Removing the Top Cover |
81 |
Figure31. Removing the Top Cover |
81 |
<GRAPHIC> |
81 |
NOTE The graphics in these steps depict a desk side unit. If this is a rack mount unit, the skins... |
81 |
NOTE The graphics in these steps depict a desk side unit. If this is a rack mount unit, the skins... |
81 |
Installing and Removing the Hard Disk Drives |
82 |
Installing and Removing the Hard Disk Drives |
82 |
To install the hard disk drives, perform the following steps. You should make sure that the disks... |
82 |
Figure32. Installing and Removing the Hard Disk Drives |
82 |
Figure32. Installing and Removing the Hard Disk Drives |
82 |
<GRAPHIC> |
82 |
Hard Disk Drive Configuration |
82 |
Hard Disk Drive Configuration |
82 |
The SCSI IDs for hard disk drives are hard-wired into the SCA Ultra2 Wide LVD SCSI interfaces in ... |
82 |
Installing and Removing an Internal CD ROM Drive |
83 |
Installing and Removing an Internal CD ROM Drive |
83 |
To install the CD ROM drive, do the following: |
83 |
Figure33. Installing the CD ROM Drive |
83 |
Figure33. Installing the CD ROM Drive |
83 |
<GRAPHIC> |
83 |
Installing and Removing Memory DIMMs |
83 |
Installing and Removing Memory DIMMs |
83 |
To install memory DIMMs in the J6700, refer to the memory sequence label inside the system or see |
83 |
When removing the DIMMs, be sure to press the tabs at both ends of the DIMM slots to release the ... |
83 |
J6700 Memory Configuration |
83 |
J6700 Memory Configuration |
83 |
The J6700 workstation has sixteen memory slots, labeled 0A, 0B to 7A, 7B. Memory DIMMs |
83 |
DIMMs should be loaded in the order shown with 0A, 0B being the first pair of DIMMs loaded, and 7... |
83 |
NOTE If memory is installed improperly or it is bad and fastboot is not enabled, your workstation... |
84 |
NOTE If memory is installed improperly or it is bad and fastboot is not enabled, your workstation... |
84 |
Figure34. Memory Loading Sequence in the J6700 |
84 |
Figure34. Memory Loading Sequence in the J6700 |
84 |
<GRAPHIC> |
85 |
Installing and Removing an I/O Card |
85 |
To install an I/O card, do the following: |
85 |
Figure35. Installing an I/O Card |
85 |
Figure35. Installing an I/O Card |
85 |
<GRAPHIC> |
85 |
PCI Slot Information for I/O Cards |
86 |
PCI Slot Information for I/O Cards |
86 |
The three PCI slots located in the PCI cage area of the J6700 workstations are 64-bit, 4x, 3.3v, ... |
86 |
CAUTION The J6700 workstations supply about 75 Watts of power to the PCI slots. Do not insert I/O... |
86 |
CAUTION The J6700 workstations supply about 75 Watts of power to the PCI slots. Do not insert I/O... |
86 |
4 Boot Console Handler |
87 |
4 Boot Console Handler |
87 |
This chapter explains how to use the Boot Console Handler, which provides an interactive environm... |
87 |
This chapter explains how to use the Boot Console Handler, which provides an interactive environm... |
87 |
Chapter Overview |
88 |
Chapter Overview |
88 |
This chapter contains the following main sections: |
88 |
• Boot Console Handler Features |
88 |
• Boot Console Handler Features |
88 |
• Accessing the Boot Console Handler |
88 |
• Boot Console Menus |
88 |
• Booting the Workstation |
88 |
• Searching for Bootable Media |
88 |
• Resetting the Workstation |
88 |
• Displaying and Setting Paths |
88 |
• Displaying and Setting the Monitor Type |
88 |
• Displaying the Current Memory Configuration |
88 |
• Displaying the Status of the I/O Slots |
88 |
• Setting the Auto Boot and Auto Search Flags |
88 |
• Displaying and Setting the Security Mode |
88 |
• Displaying and Setting Fastboot Mode |
88 |
• Displaying the LAN Station Address |
88 |
• Displaying System Information |
88 |
• Displaying PIM Information |
88 |
• Using Remote Power-On |
88 |
• Setting the Fan Speed |
88 |
• Stable Storage |
88 |
• ISL Environment |
88 |
Boot Console Handler Features |
89 |
Boot Console Handler Features |
89 |
There are times when you want to interact directly with the J6700 workstation before it boots the... |
89 |
Here are some of the things you can do: |
89 |
• Boot the workstation |
89 |
• Boot the workstation |
89 |
• Search for bootable media |
89 |
• Reset the workstation |
89 |
• Display and set boot paths |
89 |
• Display and set the monitor type |
89 |
• Display memory configuration information |
89 |
• Display the status of the I/O slots |
89 |
• Set Auto Boot, Auto Search, and Auto Start |
89 |
• Display and set Security mode |
89 |
• Set Fastboot |
89 |
• Display LAN information |
89 |
• Display system information |
89 |
• Display PIM information |
89 |
• Using Remote Power-On |
89 |
• Setting the Fan Speed |
89 |
NOTE All of the tasks in the Boot Console Handler should be performed by a system administrator w... |
89 |
NOTE All of the tasks in the Boot Console Handler should be performed by a system administrator w... |
89 |
Accessing the Boot Console Handler |
90 |
Accessing the Boot Console Handler |
90 |
To access the Boot Console Handler, follow these steps: |
90 |
1. Close any files and applications on the workstation. |
90 |
1. Close any files and applications on the workstation. |
90 |
2. Press the power switch on the front panel of the workstation to power it off. |
90 |
3. Power on the workstation after the system has completely shut down. |
90 |
4. Press a key. You will then see the following message: |
90 |
Boot Console Menus |
91 |
Boot Console Menus |
91 |
The boot console menus follow, showing the various tasks you can perform and the available inform... |
91 |
The shortened version of each command is indicated by the uppercase letters. |
91 |
Help is available for all the menus and commands by using either |
91 |
------ Main Menu -------------------------------------- |
91 |
CommandDescription |
91 |
------------------ |
91 |
BOot [PRI|ALT|<path>]Boot from specified path PAth [PRI|ALT|CON|KEY [<path>]]Disp... |
91 |
------ Configuration Menu ----------------------------- CommandDescripti... |
92 |
FastBoot [ON|OFF]Display or set boot tests execution LanConfig[<config_type>]... |
92 |
------ Information Menu ------------------------------- CommandDescription -----... |
93 |
------ Service Menu ----------------------------------- CommandDescripti... |
94 |
RemotePower [ON|OFF] Display/enable/disable remote power ScRoll [ON|OFF] Display or change s... |
94 |
Booting the Workstation |
95 |
Booting the Workstation |
95 |
You usually start a workstation by turning it on and waiting for HP-UX to boot automatically. How... |
95 |
For example, you may want to start the workstation from an operating system that is stored on a d... |
95 |
Here are some possible booting scenarios you may encounter: |
95 |
• If you know which device you want to boot from, and you know that it contains a bootable operat... |
95 |
• If you know which device you want to boot from, and you know that it contains a bootable operat... |
95 |
• If you know which device you want to boot from, and you know that it contains a bootable operat... |
95 |
• If you do not know which device you want to boot from, then type the following at the prompt: |
95 |
• If you do not know which device you want to boot from, then type the following at the prompt: |
95 |
|
95 |
At the prompt, you might type the following: |
95 |
• If you wish to interact with the Initial System Loader (ISL) before booting the workstation, fo... |
96 |
• If you wish to interact with the Initial System Loader (ISL) before booting the workstation, fo... |
96 |
For example, if the usual kernel ( |
96 |
• If you do not know which media in the file systems have bootable operating systems, you can fin... |
96 |
• If you do not know which media in the file systems have bootable operating systems, you can fin... |
96 |
Searching for Bootable Media |
97 |
Searching for Bootable Media |
97 |
To list all devices that contain bootable media, follow the directions in the section “Accessing ... |
97 |
The |
97 |
• To temporarily suspend the search, press |
97 |
• To temporarily suspend the search, press |
97 |
• To continue the search, press |
97 |
• To halt the search, press any other key. |
97 |
These flow-control commands do not work with a bit-mapped display, but such a display can show mo... |
97 |
To search for devices of just one type that actually contain bootable media, follow the direction... |
97 |
where |
97 |
• fwscsi is the internal, Wide LVD (Low Voltage Differential) SCSI bus. |
97 |
• fwscsi is the internal, Wide LVD (Low Voltage Differential) SCSI bus. |
97 |
• scsi |
97 |
• scsi |
97 |
• lan |
97 |
• lan |
97 |
• ide |
97 |
• ide |
97 |
• pci |
97 |
• pci |
97 |
For more information about the |
97 |
Resetting the Workstation |
98 |
Resetting the Workstation |
98 |
To reset the workstation to its predefined values, follow the directions in the section “Accessin... |
98 |
When the Configuration Menu appears, type the following at the prompt: |
98 |
Then type the following at the prompt: |
98 |
Configuration Menu: Enter command > reset [Enter] |
98 |
Configuration Menu: Enter command > reset [Enter] |
98 |
Displaying and Setting Paths |
99 |
Displaying and Setting Paths |
99 |
A path is the hardware address of a device that is attached to the I/O system of a workstation. The |
99 |
The |
99 |
<TABLE> |
99 |
Table41. System Paths |
99 |
<TABLE HEADING> |
99 |
<TABLE ROW> |
99 |
Path Type |
99 |
Path Type |
99 |
Device |
99 |
<TABLE BODY> |
99 |
<TABLE ROW> |
99 |
primary or pri |
99 |
primary |
99 |
The workstation’s default boot device (usually the root disk) |
99 |
<TABLE ROW> |
99 |
alternate or alt |
99 |
alternate |
99 |
The workstation’s alternate boot device (usually a DDS-format tape device) |
99 |
<TABLE ROW> |
99 |
console or con |
99 |
console |
99 |
The workstation’s primary display device |
99 |
<TABLE ROW> |
99 |
keyboard or key |
99 |
keyboard |
99 |
The workstation’s primary ASCII input device |
99 |
To display the current settings for the system paths, type the following at the prompt: |
99 |
Main Menu: Enter command > path [Enter] |
99 |
The paths are displayed in Mnemonic Style Notation, as shown in Table 5-2. |
99 |
<TABLE> |
99 |
Table42. Mnemonic Style Notation |
99 |
<TABLE HEADING> |
99 |
<TABLE ROW> |
99 |
I/O Type |
99 |
I/O Type |
99 |
Specification Format |
99 |
<TABLE BODY> |
99 |
<TABLE ROW> |
99 |
Internal LVD SCSI |
99 |
fwscsi.scsi_address.logical_unit_number |
99 |
fwscsi.scsi_address.logical_unit_number |
99 |
<TABLE ROW> |
99 |
External SE/LVD SCSI |
99 |
scsi.scsi_address.logical_unit_number |
99 |
scsi.scsi_address.logical_unit_number |
99 |
<TABLE ROW> |
99 |
Built-in LAN |
99 |
lan.server_address.init_timeout.io_timeout |
99 |
<TABLE ROW> |
99 |
Optional SCSI |
99 |
Optional SCSI |
99 |
pcin.scsi_address.logical_unit_number |
99 |
pci |
99 |
<TABLE ROW> |
99 |
Built-in IDE |
99 |
Built-in IDE |
99 |
IDE |
99 |
IDE |
99 |
To display the current setting for a particular system path, follow the directions in the section... |
99 |
Main Menu: Enter command > path path_type [Enter] |
99 |
where |
99 |
For example, to get the path to the primary boot device, follow the directions in the section “Ac... |
99 |
Main Menu: Enter command > path primary [Enter] |
99 |
To set a system path to a new value, follow the directions in the section “Accessing the Boot Con... |
100 |
Main Menu: Enter command > path |
100 |
where |
100 |
Main Menu: Enter command > path pri scsi.6.0 [Enter] |
100 |
Displaying and Setting the Monitor Type |
101 |
Displaying and Setting the Monitor Type |
101 |
The workstation ships from the factory preset to use a monitor with a specific resolution and fre... |
101 |
The Monitor Command |
101 |
The Monitor Command |
101 |
The |
101 |
NOTE The |
101 |
NOTE The |
101 |
NOTE The |
101 |
To display the current graphics and console information, type the following set of commands: |
101 |
Main Menu: Enter command > configuration [Enter] |
101 |
Configuration Menu: Enter command > monitor [Enter] |
101 |
The correct usage for setting the graphics configuration is: |
101 |
Configuration Menu: Enter command > monitor graphics_path type [Enter] |
101 |
where valid |
101 |
• graphics(1) |
101 |
• graphics(1) |
101 |
• graphics(1) |
101 |
• graphics(2) |
101 |
• graphics(2) |
101 |
• graphics(3) |
101 |
• graphics(3) |
101 |
NOTE No blanks or spaces may be used in the |
101 |
NOTE No blanks or spaces may be used in the |
101 |
type |
101 |
type |
101 |
Boot Console Handler:displaying current monitor configuration |
102 |
Boot Console Handler:displaying current monitor configuration |
102 |
Boot Console Handler:displaying current monitor configuration |
102 |
To display the current monitor configuration for the workstation from the Configuration Menu of t... |
102 |
Main Menu: Enter command > configuration [Enter] |
102 |
This places you in the Configuration Menu. From here, type: |
102 |
Configuration Menu: Enter command > monitor [Enter] |
102 |
This displays a list of the current graphics adapters and their monitor types configured for the ... |
102 |
MONITOR INFORMATION |
102 |
MONITOR INFORMATION |
102 |
---------- ---- -------------- ---------- ---- ---- ------- |
102 |
GRAPHICS(1) |
102 |
GRAPHICS(1) |
102 |
Configuration Menu: Enter command > |
102 |
Configuration Menu: Enter command > |
102 |
In this example, only the graphics adapter (located in slot 1) |
102 |
Setting the Monitor Type |
102 |
Setting the Monitor Type |
102 |
You can set the monitor type for a graphics adapter by typing the following: |
102 |
Configuration Menu: Enter command > monitor graphics(n) tt [Enter] |
102 |
where |
102 |
To display a list of supported monitors that are used by a graphics card, type the following: |
102 |
Configuration Menu: Enter command > monitor list [Enter] |
102 |
Configuration Menu: Enter command > monitor list [Enter] |
102 |
A list of valid monitor types similar to the following is displayed. |
102 |
NOTE Each graphics adapter will have a different list of valid monitor types. The meaning of any ... |
102 |
NOTE Each graphics adapter will have a different list of valid monitor types. The meaning of any ... |
102 |
MONITOR INFORMATION PathSlotHeadTypeSizeFreqClass ------------------... |
103 |
MONITOR INFORMATION PathSlotHeadTypeSizeFreqClass ------------------... |
103 |
To set the monitor type for |
103 |
Configuration Menu: Enter command > monitor graphics(1) 8 [Enter] |
103 |
This will take effect on the next reboot or reset of the workstation. |
103 |
MONITOR INFORMATION |
103 |
MONITOR INFORMATION |
103 |
Path |
103 |
Path |
103 |
---------- ---- -------------- --------- ---- ---- ------- |
103 |
GRAPHICS(1) |
103 |
GRAPHICS(1) |
103 |
The new monitor selection will either take effect the next time you reboot the workstation if thi... |
103 |
Trying to change the monitor type to a number not listed for that graphics device fails and gives... |
103 |
Value of monitor type |
103 |
Value of monitor type |
103 |
NOTE Changing the monitor type on an empty slot works; the monitor type will be saved for a futur... |
103 |
NOTE Changing the monitor type on an empty slot works; the monitor type will be saved for a futur... |
103 |
Setting the Monitor Type at Power On |
104 |
Setting the Monitor Type at Power On |
104 |
If you replace a workstation’s monitor with a different monitor type, and do not set the workstat... |
104 |
Cycle the power to the workstation. Wait 2 seconds after the Num Lock light flashes near the end ... |
104 |
NOTE It takes approximately one minute after powering on the workstation before the Num Lock ligh... |
104 |
NOTE It takes approximately one minute after powering on the workstation before the Num Lock ligh... |
104 |
The system cycles through the available monitor types one at a time. When you see a message simil... |
104 |
MONITOR INFORMATION |
104 |
MONITOR INFORMATION |
104 |
Path |
104 |
Path |
104 |
---------- ---- ----------- --------- ----- ---- ------ |
104 |
GRAPHICS(1) |
104 |
GRAPHICS(1) |
104 |
Press [RETURN] to select this monitor type (type |
104 |
Press [RETURN] to select this monitor type (type |
104 |
The system queries you to confirm your selection. Press |
104 |
If you press any key other than |
104 |
Monitor type not saved. |
104 |
Monitor type not saved. |
104 |
At this point, the new monitor type is active, but not saved. Because you did not save the monito... |
104 |
Next, the following message is displayed: |
104 |
To select a new Graphics Monitor Type press the <TAB> key now, otherwise EXIT by entering any oth... |
104 |
To restart the monitor selection process, press |
104 |
Troubleshooting Monitor Problems |
105 |
Troubleshooting Monitor Problems |
105 |
In the event that the console stops displaying to the graphics device, use the following procedur... |
105 |
1. Turn off the workstation’s power. |
105 |
1. Turn off the workstation’s power. |
105 |
1. Turn off the workstation’s power. |
105 |
1. Turn off the workstation’s power. |
105 |
2. Disconnect the USB keyboard connector from the rear panel. |
105 |
2. Disconnect the USB keyboard connector from the rear panel. |
105 |
3. Connect a serial terminal emulator to the Serial 1 connector (the left serial connector) on th... |
105 |
3. Connect a serial terminal emulator to the Serial 1 connector (the left serial connector) on th... |
105 |
4. Power on the workstation. The system will now display the console to the terminal connected to... |
105 |
4. Power on the workstation. The system will now display the console to the terminal connected to... |
105 |
5. Set the monitor type and path using the Boot Console Handler. |
105 |
5. Set the monitor type and path using the Boot Console Handler. |
105 |
Changing the Console to an External Terminal |
105 |
Changing the Console to an External Terminal |
105 |
In the event that the console stops displaying to the graphics device, use the following procedur... |
105 |
The workstation will now display the console to the terminal connected to the Serial 1 port. |
105 |
Displaying the Current Memory Configuration |
106 |
Displaying the Current Memory Configuration |
106 |
The following sample screen output uses the |
106 |
To display the current memory configuration for a workstation, first follow the directions in the... |
106 |
Main Menu: Enter command > information [Enter] |
106 |
Main Menu: Enter command > information [Enter] |
106 |
This places you in the Information Menu. From here, type the following: |
106 |
Information Menu: Enter command > memory [Enter] |
106 |
Information Menu: Enter command > memory [Enter] |
106 |
The screen displays status and configuration information for the memory DIMMs installed in the wo... |
106 |
MEMORY INFORMATION |
106 |
4a/4b 512MB Active 512MB Active |
106 |
TOTAL MEMORY = 8192MB |
106 |
Memory Installation Guidelines |
107 |
Active, Installed Memory : 768MB of SDRAM |
107 |
Displaying the Status of the I/O Slots |
108 |
Displaying the Status of the I/O Slots |
108 |
The |
108 |
To use the |
108 |
Information Menu: Enter command > io [Enter] |
108 |
Information Menu: Enter command > io [Enter] |
108 |
Information about the built-in and optional I/O devices is displayed. For example: |
108 |
I/O MODULE INFORMATION IODCIODC Pat... |
108 |
Setting the Auto Boot and Auto Search Flags |
109 |
Setting the Auto Boot and Auto Search Flags |
109 |
The |
109 |
To examine the state of the |
109 |
Configuration Menu: Enter command > auto [Enter] |
109 |
If |
109 |
The state of the |
109 |
To change the state of the |
109 |
Configuration Menu: Enter command > auto boot state [Enter] |
109 |
OR: |
109 |
Configuration Menu: Enter command > auto search state [Enter] |
109 |
where |
109 |
Displaying and Setting the Security Mode |
110 |
Displaying and Setting the Security Mode |
110 |
The |
110 |
When the |
110 |
To display the current setting for the |
110 |
Configuration Menu: Enter command > secure [Enter] |
110 |
To set the |
110 |
Configuration Menu: Enter command > secure on [Enter] |
110 |
To set the |
110 |
Configuration Menu: Enter command > secure off [Enter] |
110 |
Displaying and Setting Fastboot Mode |
111 |
Displaying and Setting Fastboot Mode |
111 |
When |
111 |
When |
111 |
If you are experiencing difficulty in booting the workstation, set |
111 |
To display the status of |
111 |
Configuration Menu: Enter command > fastboot [Enter] |
111 |
To disable |
111 |
Configuration Menu: Enter command > fastboot off [Enter] |
111 |
To enable |
111 |
Configuration Menu: Enter command > fastboot on [Enter] |
111 |
Displaying the LAN Station Address |
112 |
Displaying the LAN Station Address |
112 |
It is sometimes necessary to supply the LAN station address of the workstation to other users. Fo... |
112 |
A LAN station address is the label that uniquely identifies the LAN connection for the workstatio... |
112 |
To display the workstation’s LAN station address, type the following: |
112 |
Information Menu: Enter command > lanaddress [Enter] |
112 |
The LAN station address is displayed as a twelve-digit number in hexadecimal notation, similar to... |
112 |
LAN Station Addresses: 001083-000429 |
112 |
The address is for the workstation’s built-in LAN interface. |
112 |
Displaying System Information |
113 |
Displaying System Information |
113 |
The |
113 |
Information Menu: Enter command > all [Enter] |
113 |
This information is paged to allow you to view it as necessary, unless the |
113 |
Displaying PIM Information |
113 |
Displaying PIM Information |
113 |
The |
113 |
Service Menu: Enter command > pim |
113 |
Using Remote Power-On |
114 |
Using Remote Power-On |
114 |
The J6700 workstation has a remote power-on feature that allows you to power up and shut down you... |
114 |
<TABLE> |
114 |
<TABLE HEADING> |
114 |
<TABLE ROW> |
114 |
Press: |
114 |
Type: |
114 |
Description |
114 |
<TABLE BODY> |
114 |
<TABLE ROW> |
114 |
Esc |
114 |
Esc |
114 |
rsys^on |
114 |
rsys^on |
114 |
Turns the system on |
114 |
<TABLE ROW> |
114 |
Esc |
114 |
Esc |
114 |
rsys^off |
114 |
rsys^off |
114 |
Turns the system off |
114 |
<TABLE ROW> |
114 |
Esc |
114 |
Esc |
114 |
rsys^ton |
114 |
rsys^ton |
114 |
Turns the system off without soft-power down |
114 |
<TABLE ROW> |
114 |
Esc |
114 |
Esc |
114 |
pic^sleep |
114 |
pic^sleep |
114 |
Causes RPC to stop responding to commands |
114 |
If the remote-power jumper is set to the enable position (factory default), the Remote Power Cont... |
114 |
1. Reboot your workstation. If |
114 |
1. Reboot your workstation. If |
114 |
1. Reboot your workstation. If |
114 |
2. Press any key. You will then see the message: |
115 |
2. Press any key. You will then see the message: |
115 |
3. At the |
115 |
3. At the |
115 |
4. Turn remote power off by typing the following at the prompt and press |
115 |
4. Turn remote power off by typing the following at the prompt and press |
115 |
5. Return to the |
115 |
6. Continue booting the system by typing the following at the prompt and press |
115 |
7. Answer “ |
115 |
7. Answer “ |
115 |
Troubleshooting Hint for an Unresponsive RPC |
115 |
Troubleshooting Hint for an Unresponsive RPC |
115 |
If the Remote Power Controller (RPC) is enabled and it seems to be unresponsive, press the |
115 |
Setting the Fan Speed |
116 |
Setting the Fan Speed |
116 |
There are two fan speed settings available on the J6700 workstation. The |
116 |
Rack-Mount Fan Speed |
116 |
Rack-Mount Fan Speed |
116 |
If you currently have a desk-side workstation that you want to convert to a rack-mount workstatio... |
116 |
1. Turn on the workstation and press the |
116 |
1. Turn on the workstation and press the |
116 |
2. Stop the boot process by pressing any key before the ten-second limit. This gets you to the Bo... |
116 |
3. Enter the following command at the |
116 |
4. Return to the |
116 |
Desk-Side Fan Speed |
116 |
Desk-Side Fan Speed |
116 |
If you currently have a rack-mount workstation that you want to convert to a desk-side workstatio... |
116 |
1. Turn on the workstation and press the |
116 |
1. Turn on the workstation and press the |
116 |
2. Stop the boot process by pressing any key before the ten-second limit. This gets you to the Bo... |
116 |
3. Enter the following command at the |
117 |
4. Return to the |
117 |
Initial System Loader (ISL) Environment |
118 |
Initial System Loader (ISL) Environment |
118 |
The ISL environment provides the means to load the operating system (HP-UX) environment. The ISL ... |
118 |
The ISL program is the first program loaded into main memory from an external medium (LAN, disk, ... |
118 |
The ISL environment provides the following capabilities: |
118 |
• Execute user-entered commands to modify boot device paths and boot options in stable storage. |
118 |
• Execute user-entered commands to modify boot device paths and boot options in stable storage. |
118 |
• Run offline diagnostic programs and utilities. |
118 |
• Provide automatic booting of the HP-UX operating system after power-on or reset. |
118 |
Invoking ISL from the Boot Console Handler |
118 |
Invoking ISL from the Boot Console Handler |
118 |
Perform the following steps to invoke ISL from the Boot Console Handler: |
118 |
1. Follow the directions in the section “Accessing the Boot Console Handler” found in this chapte... |
118 |
1. Follow the directions in the section “Accessing the Boot Console Handler” found in this chapte... |
118 |
2. Answering yes ( |
118 |
2. Answering yes ( |
118 |
ISL> |
118 |
ISL is the program that actually controls the loading of the operating system. By interacting wit... |
118 |
For example, if the usual kernel ( |
118 |
ISL> hpux /stand/vmunix.prev [Enter] |
118 |
ISL User Commands |
119 |
ISL User Commands |
119 |
The following commands that are available in the ISL environment allow you to display and modify ... |
119 |
• help |
119 |
• help |
119 |
• help |
119 |
• display |
119 |
• display |
119 |
• primpath |
119 |
• primpath |
119 |
• altpath |
119 |
• altpath |
119 |
• conspath |
119 |
• conspath |
119 |
• listautofl |
119 |
• listautofl |
119 |
• support |
119 |
• support |
119 |
• readss |
119 |
• readss |
119 |
5 Block Diagram |
121 |
5 Block Diagram |
121 |
This chapter contains the block diagram for the J6700 workstation’s system board and PCI board. |
121 |
This chapter contains the block diagram for the J6700 workstation’s system board and PCI board. |
121 |
System Board and PCI Board |
122 |
System Board and PCI Board |
122 |
Figure51. Block Diagram of the J6700’s System Board and PCI Board |
122 |
Figure51. Block Diagram of the J6700’s System Board and PCI Board |
122 |
<GRAPHIC> |
123 |
A Regulatory Statements |
123 |
This Appendix contains electromagnetic compatibility information and optical and acoustical state... |
123 |
This Appendix contains electromagnetic compatibility information and optical and acoustical state... |
123 |
<TABLE> |
124 |
<TABLE HEADING> |
124 |
<TABLE ROW> |
124 |
Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 |
124 |
Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 |
124 |
<TABLE BODY> |
124 |
<TABLE ROW> |
124 |
Manufacturer:Hewlett-Packard Company ... |
124 |
Manufacturer |
124 |
Manufacturer |
124 |
Safety |
124 |
Safety |
124 |
Safety |
124 |
IEC 950:1991+A1+A2+A3+A4/EN 60950:1992+A1+A2+A3+A4+A11 IEC 60825-1:1993/EN60825-1:1994+A11 Class ... |
124 |
EMC |
124 |
EMC |
124 |
CISPR 11: 1997 / EN 55011: 1998 Class A CISPR 22: 1993+A1+A2 / EN 55022: 1994+A1+A2 Class A EN 50... |
124 |
and is certified by: |
124 |
and is certified by: |
124 |
and is certified by: |
124 |
and is certified by: |
124 |
UL Listed to UL1950, 2nd edition, File E146385 cUL Listed to CSA 22.2 No. 950-M93 TÜV Certified t... |
124 |
supplementary information: |
124 |
supplementary information: |
124 |
For Compliance Information ONLY, contact: |
124 |
For Compliance Information ONLY, contact: |
124 |
Americas Contact: Hewlett-Packard, Fort Collins Site Quality Manager, mail stop 46, 3404 E. Harmo... |
124 |
Electromagnetic Compatibility |
125 |
Electromagnetic Compatibility |
125 |
Federal Communications Commission (FCC) |
125 |
Federal Communications Commission (FCC) |
125 |
This equipment has been tested and found to comply with the limits for a Class A digital device, ... |
125 |
• This device may not cause harmful interference. |
125 |
• This device may not cause harmful interference. |
125 |
• This device must accept interference received, including interference that may cause undesired ... |
125 |
• Cables used with this device must be properly shielded to comply with the requirement of the FCC. |
125 |
• You are cautioned that any changes or modifications not expressly approved in this manual could... |
125 |
VCCI Statement for Class A Products |
126 |
VCCI Statement for Class A Products |
126 |
<GRAPHIC> |
126 |
Korea RRL Statement for Class A Product |
126 |
<GRAPHIC> |
126 |
Taiwan Class A Warning |
126 |
<GRAPHIC> |
127 |
Optical and Acoustical Statements |
127 |
Visible LED Statement |
127 |
Visible LED Statement |
127 |
The LEDs on this product are classified as “Class 1 LED Product” in accordance with EN 60825-1. |
127 |
Laser Safety Statement for a Class 1 Laser Product |
127 |
Laser Safety Statement for a Class 1 Laser Product |
127 |
The CD-ROM mass-storage system is certified as a Class 1 laser product under the U.S. Department ... |
127 |
Regulation on Noise Declaration for Machines |
127 |
Regulation on Noise Declaration for Machines |
127 |
Lpa < 70 dB operator position, normal operation, per ISO 7779 Lpa < 70 dB am Arbeitsplatz, normal... |
127 |
B Specifications |
129 |
B Specifications |
129 |
This appendix lists the environmental and electrical specifications for the HP VISUALIZE J6700 wo... |
129 |
This appendix lists the environmental and electrical specifications for the HP VISUALIZE J6700 wo... |
129 |
Environmental Specifications |
130 |
Environmental Specifications |
130 |
Altitude |
130 |
Altitude |
130 |
<TABLE> |
130 |
<TABLE BODY> |
130 |
<TABLE ROW> |
130 |
Operating: |
130 |
Operating: |
130 |
0–10,000 ft (0–3,000 m) @ 0 to +45Ëš C |
130 |
<TABLE ROW> |
130 |
Non-operating: |
130 |
15,000 ft (0–4,500 m) @ –40 to +70Ëš C |
130 |
15,000 ft (0–4,500 m) @ –40 to +70Ëš C |
130 |
DC Magnetic Field Interference |
130 |
DC Magnetic Field Interference |
130 |
<TABLE> |
130 |
<TABLE BODY> |
130 |
<TABLE ROW> |
130 |
Operating: |
130 |
Operating: |
130 |
<1 Gauss at surface of product |
130 |
<TABLE ROW> |
130 |
Non-operating: |
130 |
<2 milli Gauss @ 7 feet |
130 |
Electromagnetic Interference (EMI) |
130 |
Electromagnetic Interference (EMI) |
130 |
<TABLE> |
130 |
<TABLE BODY> |
130 |
<TABLE ROW> |
130 |
Emissions: |
130 |
Emissions: |
130 |
FCC Class A CISPR A |
130 |
Electrostatic Discharge |
130 |
Electrostatic Discharge |
130 |
<TABLE> |
130 |
<TABLE BODY> |
130 |
<TABLE ROW> |
130 |
Air discharge: |
130 |
8kV |
130 |
<TABLE ROW> |
130 |
Contact discharge: |
130 |
4kV |
130 |
Temperature |
130 |
Temperature |
130 |
<TABLE> |
130 |
<TABLE BODY> |
130 |
<TABLE ROW> |
130 |
Operating: |
130 |
Operating: |
130 |
0 to +45 C |
130 |
<TABLE ROW> |
130 |
Non-operating: |
130 |
–40 to +70Ëš C |
130 |
–40 to +70Ëš C |
130 |
Humidity (Non-condensing) |
130 |
Humidity (Non-condensing) |
130 |
<TABLE> |
130 |
<TABLE BODY> |
130 |
<TABLE ROW> |
130 |
Operating: |
130 |
Operating: |
130 |
15 to 80%, 26 C max wet bulb for removable media |
130 |
<TABLE ROW> |
130 |
Non-operating: |
130 |
0 to 90% |
130 |
0 to 90% |
130 |
Leakage Current |
130 |
Leakage Current |
130 |
Less than 3.5 mA |
130 |
Shock |
131 |
Shock |
131 |
<TABLE> |
131 |
<TABLE BODY> |
131 |
<TABLE ROW> |
131 |
Operating: |
131 |
Operating: |
131 |
20g at 3ms, 1/2 sine in normal axis with no hard errors |
131 |
<TABLE ROW> |
131 |
Non-operating: |
131 |
80g at 3ms, 1/2 sine, normal axis |
131 |
Vibration |
131 |
Vibration |
131 |
<TABLE> |
131 |
<TABLE BODY> |
131 |
<TABLE ROW> |
131 |
Operating random: |
131 |
Operating random: |
131 |
0.21 Grms, 5–500 Hz |
131 |
0.21 Grms, 5–500 Hz |
131 |
<TABLE ROW> |
131 |
Swept sine survival: |
131 |
Swept sine survival: |
131 |
0.5 g peak, 5–500 Hz |
131 |
0.5 g peak, 5–500 Hz |
131 |
<TABLE ROW> |
131 |
Random survival: |
131 |
Random survival: |
131 |
2.09 Grms, 5–500 Hz |
131 |
2.09 Grms, 5–500 Hz |
131 |
Electrical Specifications |
132 |
Electrical Specifications |
132 |
Input Power |
132 |
Input Power |
132 |
<TABLE> |
132 |
<TABLE HEADING> |
132 |
<TABLE ROW> |
132 |
J6700 |
132 |
<TABLE BODY> |
132 |
<TABLE ROW> |
132 |
AC Frequency: |
132 |
AC Frequency: |
132 |
47–63 Hz |
132 |
<TABLE ROW> |
132 |
Maximum Power Input: |
132 |
Maximum Power Input: |
132 |
715 Watts |
132 |
<TABLE ROW> |
132 |
Maximum Current: |
132 |
7.4–6.2 Amps AC at 100–120VAC 3.7–3.2 Amps AC at 200–230VAC |
132 |
C SCSI Connections |
133 |
C SCSI Connections |
133 |
This appendix provides information about connecting SCSI (Small Computer System Interface) device... |
133 |
This appendix provides information about connecting SCSI (Small Computer System Interface) device... |
133 |
Appendix Overview |
134 |
Appendix Overview |
134 |
This appendix contains the following main sections: |
134 |
• SCSI Bus Differences |
134 |
• SCSI Bus Differences |
134 |
• SCSI Bus Differences |
134 |
• SCSI Restrictions |
134 |
• SCSI Restrictions |
134 |
• SCSI Bus Length Constraints |
134 |
• SCSI Bus Length Constraints |
134 |
• Assigning SCSI Device IDs |
134 |
• Assigning SCSI Device IDs |
134 |
• Connecting to the SCSI Ports |
134 |
• Connecting to the SCSI Ports |
134 |
SCSI:terminators |
134 |
SCSI:terminators |
134 |
SCSI:terminators |
134 |
Terminators, SCSI |
134 |
SCSI:bus differences |
135 |
SCSI:bus differences |
135 |
SCSI:bus differences |
135 |
A SCSI (Small Computer Systems Interface) bus is an IEEE standard bus for connecting a workstatio... |
135 |
There are two types of SCSI buses available with the J6700 workstation: a |
135 |
SCSI:mixing NSE and LVD devices on same bus |
135 |
SCSI:mixing NSE and LVD devices on same bus |
135 |
SCSI:mixing NSE and LVD devices on same bus |
135 |
<TABLE> |
135 |
TableC1. SCSI Bus Differences |
135 |
<TABLE HEADING> |
135 |
<TABLE ROW> |
135 |
SCSI Type |
135 |
Transfer Rate |
135 |
Data Bus Width |
135 |
Maximum Addresses |
135 |
Maximum Cable Length |
135 |
Device Physical Location |
135 |
<TABLE BODY> |
135 |
<TABLE ROW> |
135 |
SE/LVD |
135 |
Up to 20 MB/sec |
135 |
8 bits |
135 |
0 through 6 |
135 |
3.0 meters (9.84 feet) |
135 |
External |
135 |
<TABLE ROW> |
135 |
LVD |
135 |
Up to 80 MB/sec |
135 |
16 bits |
135 |
0 through 6; 8 through 15 |
135 |
12 meters (39.37 feet) |
135 |
Internal |
135 |
SCSI Restrictions |
136 |
SCSI Restrictions |
136 |
This section describes the SCSI restrictions that apply to the J6700 workstations in the followin... |
136 |
• Cables |
136 |
• Cables |
136 |
• Cables |
136 |
• Terminators |
136 |
• Terminators |
136 |
• SCSI configuration constraints |
136 |
• SCSI configuration constraints |
136 |
NOTE The SE SCSI bus supports only 7 devices because address 7 is reserved by the system. Similar... |
136 |
NOTE The SE SCSI bus supports only 7 devices because address 7 is reserved by the system. Similar... |
136 |
SCSI:cables |
136 |
SCSI:cables |
136 |
SCSI:cables |
136 |
Only SCSI cables approved by HP can be used to connect a J6700 workstation to SCSI devices. HP of... |
136 |
• 1.0 meter (3.281 feet) cable (HP Product Number C2908A) |
136 |
• 1.0 meter (3.281 feet) cable (HP Product Number C2908A) |
136 |
• 1.0 meter (3.281 feet) cable (HP Product Number C2908A) |
136 |
• 1.5 meter (4.922 feet) cable (HP Product Number C2956A) |
136 |
• 1.5 meter (4.922 feet) cable (HP Product Number C2956A) |
136 |
HP offers the following SCSI cables for LVD SCSI devices: |
136 |
• 0.5 meter (1.64 feet) cable (HP Product Number C2978A) |
136 |
• 0.5 meter (1.64 feet) cable (HP Product Number C2978A) |
136 |
• 0.5 meter (1.64 feet) cable (HP Product Number C2978A) |
136 |
• 1.5 meter (4.922 feet) cable (HP Product Number C2979A) |
136 |
• 1.5 meter (4.922 feet) cable (HP Product Number C2979A) |
136 |
CAUTION SCSI cables approved by HP are designed to function within the SCSI tolerances for HP dev... |
136 |
CAUTION SCSI cables approved by HP are designed to function within the SCSI tolerances for HP dev... |
136 |
Always use the shortest possible cable(s) for a configuration. |
136 |
NOTE See “SCSI Bus Length Constraints” on |
136 |
NOTE See “SCSI Bus Length Constraints” on |
136 |
SCSI:terminators |
136 |
SCSI:terminators |
136 |
SCSI:terminators |
136 |
Terminators, SCSI |
136 |
The J6700 workstation has auto termination and does not require external termination. |
136 |
NOTE The last external device connected to the SCSI bus must be terminated with a SCSI terminator. |
136 |
NOTE The last external device connected to the SCSI bus must be terminated with a SCSI terminator. |
136 |
SCSI:configuration constraints |
137 |
SCSI:configuration constraints |
137 |
SCSI:configuration constraints |
137 |
SCSI:configuration constraints |
137 |
Configuration:SCSI devices |
137 |
The number of SCSI devices per bus is limited (see Table C-1 earlier in this appendix). Before ad... |
137 |
SCSI:bus lengths |
138 |
SCSI:bus lengths |
138 |
SCSI:bus lengths |
138 |
This section discusses SCSI bus lengths constraints for the SE and LVD SCSI buses. |
138 |
NSE SCSI-2:bus lengths |
138 |
NSE SCSI-2:bus lengths |
138 |
NSE SCSI-2:bus lengths |
138 |
The maximum cable length for an SE SCSI bus is 3 meters. The J6700 workstation use a negligible a... |
138 |
NOTE When calculating the total SE SCSI cable/bus/trace length used externally, remember to accou... |
138 |
NOTE When calculating the total SE SCSI cable/bus/trace length used externally, remember to accou... |
138 |
There are two total cable length specifications you need to consider when dealing with an SE SCSI... |
138 |
The total cable length specifications are as follows: |
138 |
• For a total of one to four devices being connected to the SE SCSI bus, the total length of cabl... |
138 |
• For a total of one to four devices being connected to the SE SCSI bus, the total length of cabl... |
138 |
• For a total of one to four devices being connected to the SE SCSI bus, the total length of cabl... |
138 |
• For a total of five to eight devices being connected to the SE SCSI bus, the total length of ca... |
138 |
• For a total of five to eight devices being connected to the SE SCSI bus, the total length of ca... |
138 |
NOTE The computer is counted as one of the devices, and the internal length of its cabling is 0.1... |
138 |
NOTE The computer is counted as one of the devices, and the internal length of its cabling is 0.1... |
138 |
Ultra2 Wide LVD SCSI:bus lengths |
138 |
Ultra2 Wide LVD SCSI:bus lengths |
138 |
Ultra2 Wide LVD SCSI:bus lengths |
138 |
The maximum cable length for an LVD SCSI bus is 12 meters. The J6700 workstation use 1 meter of t... |
138 |
NOTE When calculating the total LVD SCSI cable/bus/trace length used externally, remember to acco... |
138 |
NOTE When calculating the total LVD SCSI cable/bus/trace length used externally, remember to acco... |
138 |
SCSI:device IDs |
139 |
SCSI:device IDs |
139 |
SCSI:device IDs |
139 |
Before assigning a SCSI device ID to a new SCSI device, you need to determine which SCSI device I... |
139 |
|
139 |
After a few moments, the |
139 |
Class I H/W Path Driver S/W State H/W Type Description |
139 |
NSE SCSI-2:device IDs |
140 |
NSE SCSI-2:device IDs |
140 |
NSE SCSI-2:device IDs |
140 |
You can determine which SCSI devices are currently in use by looking under the |
140 |
SCSI device |
140 |
SCSI device |
140 |
SCSI device |
140 |
10/0/15/0.2.0 |
140 |
10/0/15/0.2.0 |
140 |
10/0/15/0.2.0 |
140 |
SCSI |
140 |
SCSI |
140 |
10/0/15/0.2.0 |
140 |
10/0/15/0.2.0 |
140 |
10/0/15/0.2.0 |
140 |
SCSI ID 2 |
140 |
SCSI ID 2 |
140 |
10/0/15/0.2.0 |
140 |
10/0/15/0.2.0 |
140 |
10/0/15/0.2.0 |
140 |
CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont... |
140 |
CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont... |
140 |
Ultra2 Wide LVD SCSI:device IDs |
140 |
Ultra2 Wide LVD SCSI:device IDs |
140 |
Ultra2 Wide LVD SCSI:device IDs |
140 |
You can determine which LVD SCSI devices are currently in use by looking under the |
140 |
SCSI device |
140 |
SCSI device |
140 |
SCSI device |
140 |
10/0/15/1.5.0 |
140 |
10/0/15/1.5.0 |
140 |
10/0/15/1.5.0 |
140 |
LVD SCSI |
140 |
LVD SCSI |
140 |
10/0/15/1.5.0 |
140 |
10/0/15/1.5.0 |
140 |
10/0/15/1.5.0 |
140 |
SCSI ID 5 |
140 |
SCSI ID 5 |
140 |
10/0/15/1.5.0 |
140 |
10/0/15/1.5.0 |
140 |
10/0/15/1.5.0 |
140 |
CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont... |
140 |
CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont... |
140 |
Ultra2 Wide LVD SCSI:connecting to the port |
141 |
Ultra2 Wide LVD SCSI:connecting to the port |
141 |
Ultra2 Wide LVD SCSI:connecting to the port |
141 |
NSE SCSI-2:connecting to the port |
141 |
SCSI:connecting to the ports |
141 |
This section describes how to connect to the workstation’s SE SCSI port. |
141 |
SCSI:connectors |
141 |
SCSI:connectors |
141 |
SCSI:connectors |
141 |
NSE SCSI-2:connector |
141 |
Ultra2 Wide LVD SCSI:connector |
141 |
<GRAPHIC> |
141 |
NOTE The last external device connected to the SCSI bus must be terminated with a SCSI terminator. |
141 |
D Related Documentation |
143 |
D Related Documentation |
143 |
This appendix lists the part numbers and titles of documents related to the HP VISUALIZE J6700 wo... |
143 |
This appendix lists the part numbers and titles of documents related to the HP VISUALIZE J6700 wo... |
143 |
Additional Documentation |
144 |
Additional Documentation |
144 |
Site Preparation Guide |
144 |
Site Preparation Guide |
144 |
• A5990-90005 – |
144 |
• A5990-90005 – |
144 |
Installation Poster and Getting Started Guide |
144 |
Installation Poster and Getting Started Guide |
144 |
• A5990-90000 - |
144 |
• A5990-90000 - |
144 |
• A5990-90022 - |
144 |
Parts and Replacement Guide |
144 |
Parts and Replacement Guide |
144 |
• A5990-90060 - |
144 |