Hikvision DS-2DE4425IW-DE User Manual

Hikvision DS-2DE4425IW-DE Manual

Get Hikvision DS-2DE4425IW-DE PDF manuals and user guides View all Hikvision DS-2DE4425IW-DE manuals
Add to My Manuals
Save this manual to your list of manuals

Hikvision DS-2DE4425IW-DE manual content summary:

  • Hikvision DS-2DE4425IW-DE | User Manual - Page 1
    Network Speed Dome User Manual
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 2
    Network Speed Dome User Manual Initiatives on the Use of Video Products Thank you for choosing Hikvision products. Technology affects every data takes place. With the philosophy of "Technology for the Good", Hikvision requests that every end user of video technology and video products shall comply
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 3
    Network Speed Dome User Manual control, selecting a suitable network environment (the Internet or Intranet) where video products are connected, establishing and constantly optimizing network security. ● Video products have made great
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 4
    reasons. Please find the latest version of this Manual at the Hikvision website ( https:// www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks and other Hikvision's trademarks and logos are the properties of
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 5
    DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS. iv
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 6
    Chapter 3 Smart Function ...8 3.1 Allocate VCA Resource ...8 3.2 Set Camera Info ...8 3.3 Face Capture ...8 3.3.1 Set Auto Face Capture Rule 8 3.3.2 Operate Manual Face Capture 10 3.3.3 Overlay and Capture 11 3.3.4 Face Capture Algorithm Parameters 11 3.4 Smart Display ...13 Chapter 4 PTZ ...14
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 7
    Network Speed Dome User Manual 4.3.1 Set One-Touch Patrol 18 4.4 Set Pattern Scan ...18 4.5 Set Limit ...19 4.6 Set 26 5.1.9 Count Pixel ...27 5.1.10 Light ...27 5.1.11 Lens Initialization ...27 5.1.12 Track Manually ...27 5.1.13 Conduct 3D Positioning 27 5.2 Set Transmission Parameters 28 vi
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 8
    Network Speed Dome User Manual Chapter 6 Video and Audio ...30 6.1 Video Settings ...30 6.1.1 Stream Type ...30 6.1.2 Video Type ...30 6.1.3 Resolution ...30 6.1.4 Bitrate Type and Max. Bitrate 31 6.1.5 Video Quality ...31 6.1.6
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 9
    7.1.2 Set FTP ...44 7.1.3 Set NAS ...45 7.1.4 eMMC Protection ...46 7.1.5 Set Cloud Storage ...46 7.2 Video Recording ...47 7.2.1 Record Automatically 47 7.2.2 Record Manually ...48 7.2.3 Playback and Download Video 48 7.3 Capture Configuration ...49 7.3.1 Capture Automatically 49 7.3.2 Capture
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 10
    73 10.2 Port ...74 10.3 Port Mapping ...75 10.3.1 Set Auto Port Mapping 75 10.3.2 Set Manual Port Mapping 75 10.3.3 Set Port Mapping on Router 76 10.4 SNMP ...77 10.5 Access to Client 78 10.7.1 Enable Hik-Connect Service on Camera 79 10.7.2 Set Up Hik-Connect 80 10.7.3 Add Camera to Hik-Connect
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 11
    Network Speed Dome User Manual 10.8 Set ISUP ...81 10.9 Set Open Network Video Interface 81 10.10 Set Network Service ...81 10.11 Set Alarm 11.9 Set Live View Connection 86 11.10 Time and Date ...86 11.10.1 Synchronize Time Manually 86 11.10.2 Set NTP Server ...86 11.10.3 Set DST ...87 11.11 Set
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 12
    Network Speed Dome User Manual 11.12.6 Set QoS ...91 11.12.7 Set IEEE 802.1X ...91 11.12.8 SSH ...92 11.12.9 Control Timeout Settings 92 11.12.10 Certificate Management 92 11.12.11 User and Account 95 Appendix A. Device Command 97 Appendix B. Device Communication Matrix 98 xi
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 13
    Network Speed Dome User Manual Chapter 1 Overview 1.1 Product Introduction The Network Speed Dome different models. You can enable the functions as you need. Audio and Visual Alarm The device supports flashing light alarm and audio alarm to warn intruders off. Face Capture The device captures human
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 14
    Display Web Browser Network Speed Dome User Manual Recommended Specifications 1024 × 768 resolution or higher Internet Explorer 10 and above version, Apple Safari 12 and above version, Mozilla Firefox 52 and above version, Google Chrome 57 and above version. 2
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 15
    the user account and data, you should set a login password to activate the device when access the device via network. Note Refer to the user manual of the software client for the detailed information about the client software activation. 2.1 Activate Device The device need to be activated by setting
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 16
    Network Speed Dome User Manual 2.1.2 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start ● Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/ , and install the SADP according to the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 17
    subnet as your computer by either modifying the IP address manually or checking Enable DHCP. 3) Input the admin password and illegal login lock is not needed, go to Configuration → System → Security → Security Service to turn it off. 4. Click Login. 5. Download and install appropriate plug-in for
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 18
    Network Speed Dome User Manual Operating System Web Browser Operation → Network Service to enable WebSocket or Websockets for refer to the actual device. Note The device only supports Windows and Mac OS system and do not support Linux system. 2.2.2 Admin Password Recovery If you forget the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 19
    Network Speed Dome User Manual Go to Configuration → System → Security → Security Service , and enable Enable Illegal Login Lock. Illegal Login Attempts and Locking Duration are configurable. Illegal Login Attempts When your login attempts with the wrong password
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 20
    Network Speed Dome User Manual Chapter 3 Smart Function 3.1 Allocate VCA Resource VCA resource linkage actions. Set up rule and parameters before using the function. Note ● This function is only supported by certain device models. ● To enable this function, you may need to select Face Capture on
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 21
    Network Speed Dome User Manual 2. Check Enable. 3. Select a configuration mode. Normal One detection . Normally, the PTZ control is automatically locked when you enter the configuration interface. You can manually resume the lock when the countdown is over. 2. Use PTZ control panel or click to
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 22
    detection scene. 5) Click Save. 5. Set linkage method. See Linkage Method Settings . 3.3.2 Operate Manual Face Capture Capture the target face manually in live view image. Steps 1. Click Live View. 2. Click to start manual face capture. 3. Draw a frame to select the target face in live view image
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 23
    Network Speed Dome User Manual 3.3.3 Overlay and Capture Choose to configure capture parameters and the information you want to display on stream and picture. Display VCA Info. on Stream Display
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 24
    Network Speed Dome User Manual It refers to the quality of face that triggers capture and alarm. Higher value means that better quality should be met to trigger capture and
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 25
    Network Speed Dome User Manual Face Filtering Face Filtering Time It means the time interval between the camera detecting a face and taking a capture action. If the detected face stays in
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 26
    Network Speed Dome User Manual Chapter 4 PTZ PTZ is an abbreviation for pan, tilt, and zoom. It means the movement options of the camera. the device pans. Drag the slider to adjust the speed of pan/ tilt movement. Note You can set Manual Control Speed in Configuration → PTZ → Basic Settings . 14
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 27
    Network Speed Dome User Manual Compatible The control speed is same as Keyboard Control Speed. Pedestrian Choose Pedestrian when you monitor the pedestrians. Non-motor Vehicle Choose Non-motor Vehicle
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 28
    Network Speed Dome User Manual Iris When the image is too dark, click the button to enlarge the iris. When the image is too bright, click the button to stop
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 29
    Network Speed Dome User Manual Preset No. 33 34 35 36 37 38 39 40 41 42 43 44 45 46 48 92 93 94 95 96 97 98 99 100 101 102 103 104 105 Function Alarm light off Set manual limits Save manual limits Remote reboot Call OSD menu Stop a scan Start random scan Start frame scan Start auto scan Start tilt
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 30
    Network Speed Dome User Manual It is the duration staying on one patrol point. Delete the presets in patrol. Adjust the Set Pattern Scan The device can move as the recorded pattern. Steps Note This function is only supported by certain models. 1. Click to show the PTZ control panel, and click . 18
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 31
    Stops It refers to the movement range limit when you control the device manually. Scan Stops It refers to the movement range limit when the device scans automatically. Note Scan limit is only supported by the device that has scan function. 3. Click Set and set limits according to the prompt on
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 32
    point in the scene as the base point. Steps 1. Go to Configuration → PTZ → Initial Position . 2. Move the device to the needed position by manually controlling the PTZ control buttons. 3. Click Set to save the information of initial position. Call The device moves to the set initial position. Clear
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 33
    Network Speed Dome User Manual Steps 1. Go to Configuration → PTZ → Park Action . 2. Check Enable Park Action. 3. Set Park Time: the inactive time before the device starts park action. 4. Select Action
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 34
    Network Speed Dome User Manual Note Active zoom ratio is only supported for the PTZ channel. 6. Repeat the steps above the PTZ panel. 3) Click Set as North. 3. Input the longitude and latitude of the device manually. 4. Click Save. What to do next If you lost direction when operating the device, you
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 35
    Network Speed Dome User Manual Steps 1. Go to Configuration → PTZ → Prioritize PTZ . 2. Set the that of normal focusing. To use the function, calibration should be done first. Rapid focus may not be supported by certain device models. Steps 1. Go to Configuration → PTZ → Rapid Focus . 2. Add scenes
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 36
    9. Click Save. Network Speed Dome User Manual 24
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 37
    Network Speed Dome User Manual Chapter 5 Live View It introduces the live view parameters, function icons and transmission parameters settings. 5.1 Live View Parameters The supported functions vary depending on the model. 5.1.1 Start and Stop Live View Click Live View. Click to start live view.
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 38
    Network Speed Dome User Manual 5.1.5 Select the Third-Party Plug-in When the live view cannot display via certain browsers, you can change the plug-in for live view according
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 39
    as ON in Configuration → Image → Display Settings to reset the lens parameters once. 5.1.12 Track Manually In live view, manually select a target for the device to track. Note The function may not be supported by certain device models. Steps 1. Click on the toolbar of the live view page. 2. Click
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 40
    Network Speed Dome User Manual 2. Select a target area in live image. - Left click on a point on live conditions. In different network environments, you can adjust the transmission parameters to solve the problem. Steps 1. Go to Configuration → Local . 2. Set the transmission parameters as required
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 41
    over teal-time. In poor network environment, the device cannot ensures video fluency even the fluency is enabled. Custom You can set the frame rate manually. In poor network environment, you can reduce the frame rate to get a fluent live view. But the rule information may cannot display. 3. Click OK
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 42
    Network Speed Dome User Manual Chapter 6 Video and Audio This part introduces the configuration of for each stream type. Main Stream The stream stands for the best stream performance the device supports. It usually offers the best resolution and frame rate the device can do. But high resolution
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 43
    Network Speed Dome User Manual 6.1.4 Bitrate Type and Max. Bitrate Constant Bitrate It means that the stream is compressed and transmitted at a comparatively fixed bitrate. The compression speed is fast,
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 44
    Network Speed Dome User Manual H.264+ H.264+ is an improved compression coding technology based on H.264. By enabling H.264+, you can estimate the HDD consumption by its maximum average bitrate.
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 45
    Network Speed Dome User Manual 6.1.9 I-Frame Interval I-frame interval defines the number of frames between 2 I-frames. In H.264 and H.265, an I-frame, or intra frame, is a self-contained frame that
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 46
    Network Speed Dome User Manual Audio Input Select MicIn for the built-in microphone, and LineIn for external audio pick-up device. Note MicIn is only supported by certain models. Input volume Adjust the volume of the audio input. 6.2.2 Audio Output You can output audio through built-in speaker or
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 47
    Network Speed Dome User Manual 6.4 ROI ROI (Region of Interest) encoding helps to ROI whereas the background information is less focused. Before You Start Please check the video coding type. ROI is supported when the video coding type is H.264 or H. 265. Steps 1. Go to Configuration → Video/Audio →
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 48
    , Max. Shutter Limit, Min. Shutter Limit and Limit Gain for better exposure effect. Iris Priority The value of iris needs to be adjusted manually. The shutter and gain values are adjusted automatically according to the brightness of the environment. You can limit the changing ranges of the shutter
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 49
    device focuses once after the PTZ and lens zooming. If the image is clear, the focus does not change when the scene changes. Manual You can adjust the focus manually on the live view page. Min. Focus Distance When the distance between the scene and lens is shorter than the Min. Focus
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 50
    Network Speed Dome User Manual Set the Start Time and the End Time to define the duration for day mode. Note Day/Night Switch function varies according to models. Set Supplement Light Steps 1. Go to Configuration → Maintenance → System Service . 2. Check Enable Supplement Light. 3. Click Save. 4. Go
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 51
    Network Speed Dome User Manual When there are both very bright and very dark areas and provides clear images with more details. Note When WDR is enabled, some other functions may be not supported. Refer to the actual interface for details. DNR Digital Noise Reduction is used to reduce the image
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 52
    Network Speed Dome User Manual Set Scheduled-switch Switch the image to the linked scene mode automatically in certain time periods. Steps 1. Check Scheduled-switch. 2. Select and configure the corresponding
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 53
    Network Speed Dome User Manual 6.7 OSD You can customize OSD (On-screen Display) information such as device name, time/date, font, color, and text overlay displayed on video stream. Go
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 54
    Dome User Manual Chapter and property of the memory card. Encryption of memory card is supported to ensure data security. Set New or Unencrypted Memory Card Before You card to the device. For detailed installation, refer to Quick Start Guide of the device. Steps 1. Go to Configuration → Storage →
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 55
    Manual 6. Click Save. Set Encrypted Memory Card Before You Start ● Insert an encrypted memory card to the device. For detailed installation, refer to Quick Start Guide Detect Memory Card Status The device detects the status of Hikvision memory card. You receive notifications when your memory card is
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 56
    Network Speed Dome User Manual It shows the percentage of the remaining lifespan. memory card (with a lock) on a different device, you can go to HDD Management to unlock the memory card manually. Select the memory card, and click Unlock. Enter the correct password to unlock it. - Remove the Lock a.
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 57
    Dome User Manual Steps 1. Go to Configuration → Network → Advanced Settings → FTP . 2. Configure FTP settings. Server Address and Port The FTP server address and corresponding port. User Name and Password The FTP user should have the permission to upload pictures. If the FTP server supports picture
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 58
    Network Speed Dome User Manual Select file system protocol according to the operation system. is poor. Note The eMMC protection is only supported by certain device models with an eMMC hardware. Go to Configuration → System → Maintenance → System Service for the settings. eMMC, short for embedded
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 59
    same. 4. Click Test to test the configured settings. 5. Click Save. 7.2 Video Recording This part introduces the operations of manual and scheduled recording, playback, and downloading recorded files. 7.2.1 Record Automatically This function can record video automatically during configured time
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 60
    the expired time. The expired time is configurable. Note that once the recordings are deleted, they can not be recovered. 6. Click Save. 7.2.2 Record Manually Steps 1. Go to Configuration → Local . 2. Set the Record File Size and saving path to for recorded files. 3. Click Save. 4. Click to start
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 61
    click Save downloaded files to to change the saving path of downloaded video files. 7.3 Capture Configuration The device can capture the pictures manually or automatically and save them in configured saving path. You can view and download the snapshots. 7.3.1 Capture Automatically This function can
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 62
    . BMP The picture is compressed with good quality. 3. Click Save. 4. Click near the live view or play back window to capture a picture manually. 7.3.3 View and Download Picture You can search, view and download the pictures stored in the local storage or network storage. Steps 1. Click Picture
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 63
    Network Speed Dome User Manual Chapter 8 Event and Alarm This part introduces the configuration of events. The device takes certain response to triggered alarm. 8.1 Basic Event 8.1.1 Set Motion Detection This
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 64
    Network Speed Dome User Manual Figure 8-1 Set Rules Stop Drawing Stop drawing one area. Clear All Clear all the areas. 4. Optional: You can set the parameters of multiple areas by
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 65
    Network Speed Dome User Manual Sensitivity The higher the value of sensitivity is, the more sensitive the motion detection is. If scheduled image settings is enabled, the sensitivity of day
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 66
    Network Speed Dome User Manual Figure 8-3 Set Video Tampering Area 5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 6. Click Save. 8.1.3
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 67
    Network Speed Dome User Manual IP Address Conflicted The IP address of current device is same of the current device. Before You Start Make sure the external alarm device is connected. See Quick Start Guide for cable connection. Steps 1. Go to Configuration → Event → Basic Event → Alarm Input . 2.
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 68
    VCA Resource page to show the configuration page. See Allocate VCA Resource for instructions. Steps 1. Go to Open Platform → Smart Event → Intrusion Detection . automatically locked when you enter the configuration interface. You can manually resume the lock when the countdown is over. 4. Adjust the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 69
    Network Speed Dome User Manual 6. Optional: Set the minimum size and the maximum size for the target to improve detection accuracy. Only targets whose size are between the maximum size
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 70
    VCA Resource page to show the configuration page. See Allocate VCA Resource for instructions. Steps 1. Go to Open Platform → Smart Event → Line Crossing Detection automatically locked when you enter the configuration interface. You can manually resume the lock when the countdown is over. 4. Adjust
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 71
    Network Speed Dome User Manual Figure 8-5 Draw Line 6. Optional: Set the minimum size and the maximum size for the target to improve detection accuracy. Only targets whose size are between
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 72
    Network Speed Dome User Manual Before You Start You need to enable Smart Event on the VCA Resource page to show the configuration page. See Allocate VCA Resource for instructions. Steps 1. Go to Open Platform → Smart Event → Region Entrance Detection . 2. Check Enable. 3. Optional: Click Lock to
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 73
    VCA Resource page to show the configuration page. See Allocate VCA Resource for instructions. Steps 1. Go to Open Platform → Smart Event → Region Exiting Detection automatically locked when you enter the configuration interface. You can manually resume the lock when the countdown is over. 4. Adjust
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 74
    Network Speed Dome User Manual 2) Click Detection Area. 3) Click on the live image to draw the boundaries of the detection area, and right click to complete drawing. 6. Optional: Set the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 75
    VCA Resource page to show the configuration page. See Allocate VCA Resource for instructions. Steps 1. Go to Open Platform → Smart Event → Object Removal Detection automatically locked when you enter the configuration interface. You can manually resume the lock when the countdown is over. 4. Adjust
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 76
    Resource page to show the configuration page. See Allocate VCA Resource for instructions. Steps 1. Go to Open Platform → Smart Event → Unattended Baggage Detection automatically locked when you enter the configuration interface. You can manually resume the lock when the countdown is over. 4. Adjust
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 77
    Network Speed Dome User Manual 2) Click Detection Area. 3) Click on the live image to draw the boundaries of the detection area, and right click to complete drawing. 6. Optional: Set the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 78
    Manual 8.2.8 Set Tracking Parameters Adjust the motion parameters of the device for better target tracking performance. Steps Note This function is only supported the attitude if some zooming problems happen during tracking. See Set Device Position for instructions. By Target Frame The tracked
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 79
    Network Speed Dome User Manual Chapter 9 Arming Schedule and Alarm Linkage Arming schedule is a 2. Set alarm output parameters. Automatic Alarm For the information about the configuration, see Automatic Alarm . Manual Alarm 3. Click Save. For the information about the configuration, see
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 80
    Set Arming Schedule . 3. Click Copy to... to copy the parameters to other alarm output channels. 4. Click Save. Manual Alarm You can trigger an alarm output manually. Steps 1. Set the manual alarm parameters. Alarm Output No. Select the alarm output No. according to the alarm interface connected to
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 81
    Network Speed Dome User Manual Refer to Set FTP to set the FTP server. Refer to If you want to use STARTTLS, make sure that the protocol is supported by your email server. If you check the Enable STARTTLS while the protocol is not supported by your email sever, your email is sent with no encryption.
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 82
    Network Speed Dome User Manual 9.2.4 Notify Surveillance Center Check Notify Surveillance Center, the alarm device tracks the target when an alarm event is detected. Note This function is only supported by certain models. 9.2.6 Trigger Recording Check Trigger Recording, and the device records the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 83
    Network Speed Dome User Manual Note Only certain device models support the function. 9.2.8 Audible Warning After Video/Audio → Audio to enable built-in speaker in advance. The function is only supported by certain camera models. Set Audible Alarm Output When the device detects targets in the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 84
    use SADP to get the device IP address. Note The network that the device is connected to should support DHCP (Dynamic Host Configuration Protocol). Manual You can set the device IPv4 parameters manually. Input IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway, and click Test to see if the IP
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 85
    Network Speed Dome User Manual Input IPv6 Address, IPv6 Subnet, IPv6 Default Gateway. Consult the network administrator for required information. MTU It stands for maximum transmission unit. It is the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 86
    Network Speed Dome User Manual 10.2 Port The device port can be modified when the device the secure access. Note ● Enhanced SDK Service Port, WebSocket Port, and WebSockets Port are only supported by certain models. ● For device models that support that function, go to Configuration → Network
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 87
    name. 2. Select the port mapping mode to Auto. 3. Click Save. Note UPnP™ function on the router should be enabled at the same time. 10.3.2 Set Manual Port Mapping Steps 1. Check Enable UPnP™, and choose a friendly name for the device, or you can use the default name. 2. Select the port mapping mode
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 88
    Network Speed Dome User Manual 10.3.3 Set Port Mapping on Router The following settings are for a certain router. The settings vary depending on different models of routers. Steps 1. Select the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 89
    Network Speed Dome User Manual 10.4 SNMP You can set the SNMP network management protocol to get the alarm event and exception messages in network transmission. Before You Start Before
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 90
    By Client Software Add domain name to the client software. Refer to the client manual for specific adding methods. 10.6 Access to Device via PPPoE Dial Up Connection This device supports the PPPoE auto dial-up function. The device gets a public IP address by ADSL dial-up after the device is
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 91
    Dome User Manual Note Hik-Connect service should be supported by the camera. 10.7.1 Enable Hik-Connect Service on Camera Hik-Connect service should be enabled on your camera before using the service. You can enable the service through SADP software or Web browser. Enable Hik-Connect Service via Web
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 92
    Support → Tools → Hikvision App Store . - Scan the QR code below to download the application. Note If errors like "Unknown app" occur during the installation, solve the problem in two ways. ● Visit https://appstore.hikvision.com/static/help/index.html to refer to the troubleshooting Guide service
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 93
    the next interface to finish adding. For detailed information, refer to the user manual of the Hik-Connect app. 10.8 Set ISUP When the device is registered on to add more Open Network Video Interface users. 10.10 Set Network Service You can control the ON/OFF status of certain protocol as desired.
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 94
    software, it is recommended to use Enhanced SDK Service and set the communication in Arming Mode to encrypt the data transmission. See the user manual of the client software for the arming mode protocol. The destination IP address or host name should support HTTP, HTTP, or ISUP data transmission. 82
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 95
    Network Speed Dome User Manual Steps 1. Go to Configuration → Network → Advanced Settings → Alarm Server . 2. Enter Certificate. 3. Select Encrypted Algorithm. 4. Click Save. Note ● Only certain device models support this function. ● If the function is abnormal, check if the selected certificate is
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 96
    Network Speed Dome User Manual Chapter 11 System and Security It introduces system the parameters are reset to the default settings. 11.3 Search and Manage Log Log helps locate and troubleshoot problems. Steps 1. Go to Configuration → System → Maintenance → Log . 2. Set search conditions Major
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 97
    Network Speed Dome User Manual 11.4 Import and Export Configuration File It helps speed up batch configuration on other devices with the same parameters. Steps 1. Export configuration file. 1) Go to
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 98
    at the same time. Enter Configuration → System → Maintenance → System Service to set the upper limit of the remote connection number. 11.10 Time Select Time Zone. 3. Click Manual Time Sync.. 4. Choose one time synchronization method. - Select Set Time, and manually input or select date and time
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 99
    Network Speed Dome User Manual Steps 1. Go to Configuration → System → System Settings → Time Settings . 2. Select Time Zone. 3. Click NTP. 4. Set Server Address, NTP Port and Interval. Note Server Address is
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 100
    User Manual 11.12.1 Authentication You can improve network access security by setting RTSP and WEB authentication. Go to Configuration → System → Security → Authentication to choose authentication protocol and method according to your needs. RTSP Authentication Digest and digest/basic are supported
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 101
    Network Speed Dome User Manual Allowed Only IP addresses in the list can access the device. 4. Edit the IP address filter list. Add Add a new IP address or IP address
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 102
    Network Speed Dome User Manual Note ● Complete certificate management before selecting server certificate. of the device so as to find out the illegal intrusion and troubleshoot the security events. Steps Note This function is only supported by certain camera models. 1. Go to Configuration → System →
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 103
    Network Speed Dome User Manual Steps 1. Check Enable Log Upload Server. 2. Optional: Check 11.12.6 Set QoS QoS (Quality of Service) can help improve the network delay and network congestion by setting the priority of data sending. Note QoS needs support from network device such as router and switch
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 104
    Network Speed Dome User Manual 11.12.8 SSH Secure Shell (SSH) is a cryptographic network protocol for operating network services over an unsecured network. The SSH function is disabled by default. Caution Use the function with caution. The security risk of device internal information leakage
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 105
    Network Speed Dome User Manual 5. Optional: Click Certificate Property to see the certificate details. Start Create a self-signed certificate first. See Create and Install Self-signed Certificate for instructions. Steps 1. Go to Configuration → System → Security → Certificate Management . 2. Select
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 106
    Network Speed Dome User Manual Note The input certificate ID cannot be the same as the existed ones. 4. Click Browse to select the certificate file. 5. Select Certificate and Key and
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 107
    Network Speed Dome User Manual Note ● If you set the reminding day before expiration to 1, then the camera will remind you the day before the expiration day. 1 to 30 days
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 108
    Network Speed Dome User Manual 3. Click OK. Online Users The information of users logging into the device is shown. Go to Configuration → System → User Management → Online Users to view the
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 109
    Network Speed Dome User Manual Appendix A. Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for all Hikvision network cameras. 97
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 110
    Network Speed Dome User Manual Appendix B. Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikvision network cameras. 98
  • Hikvision DS-2DE4425IW-DE | User Manual - Page 111
    UD23863B-B
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
Network Speed Dome
User Manual