Hitachi CP-S335 User Manual
Hitachi CP-S335 Manual
 |
View all Hitachi CP-S335 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-S335 manual content summary:
- Hitachi CP-S335 | User Manual - Page 1
ENGLISH Projector CP-S335/X340/X345 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING ►Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference - Hitachi CP-S335 | User Manual - Page 2
the remote control 15 Search, Auto off, Lamp time, Filter time, Power on/off 16 Service Turning on the power 16 Maintenance 38 Turning off the power 16 Lamp 38 Operating 17 Air filter 40 Adjusting the volume 17 Other care 41 Temporarily muting the sound . . . . 17 Troubleshooting 42 - Hitachi CP-S335 | User Manual - Page 3
and usability to use it where you want. Preparations About contents of package Please see the "Contents of package" of the "User's manual - Quick guide". Your projector should come with the items shown there. Contact immediately your dealer if anything is missing. NOTE • Keep the original packing - Hitachi CP-S335 | User Manual - Page 4
Part names Part names Projector Zoom knob (18) Focus ring (18) Vent (6) Lens cover (16) (Slide door) Lens (16) Lamp cover (Lamp unit is inside.) (38) Front-Right side Remote sensor (15) Speaker (6) Elevator button (8) Elevator foot (8) Filter cover (40) (Air filter and intake vent are - Hitachi CP-S335 | User Manual - Page 5
button (16) STANDBY/ON Part names LAMP TEMP POWER MENU Cursor buttons INPUT 22) INPUT button (17) Remote control RGB button (17) VIDEO button UP VOLUME OFF END PAGE DOWN MUTE FREEZE KEYSTONE POSITION MENU ESC ENTER RESET SEARCH button (18) STANDBY/ON button (16) AUTO button (19 - Hitachi CP-S335 | User Manual - Page 6
fire, an electric shock and/or malfunction to the projector. • Don't place the projector near a humidifier, a smoking space or a kitchen. • Put nothing containing the liquid near the projector. ►Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor. 6 - Hitachi CP-S335 | User Manual - Page 7
The values shown in the table are calculated for a full size screen: 1280 x 720 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (c) The height of the screen (±10%) (b) 4:3 (a) 16:9 (a) (c) up (c) down At 4:3 screen (a) Screen size (b) Projection distance - Hitachi CP-S335 | User Manual - Page 8
horizontally. You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees. Elevator feet - Hitachi CP-S335 | User Manual - Page 9
ENGLISH Setting up About the filter cover for bottom-up use WARNING ►Do not replace the filter cover during use or immediately after use. While the projector connects with a power supply, or the projector is in a high temperature state, handling could cause an electric shock, a fire, a burn and/or - Hitachi CP-S335 | User Manual - Page 10
to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer. • Secure - Hitachi CP-S335 | User Manual - Page 11
ENGLISH Setting up Examples of connection with a computer RGB cable Stereo mini audio cable RGB out RS-232C Audio out USB(A) RS-232C cable AUDIO IN1 Y CB/PB AUDIO OUT VIDEO AUDIO IN2 CR/PR S-VIDEO USB COMPONENT VIDEO USB cable RGB IN1 CONTROL * AUDIO IN1 is linked to RGB IN1. RGB IN2 - Hitachi CP-S335 | User Manual - Page 12
Setting up Examples of connection with a VCR/DVD player Audio out Video out AUDIO IN1 Y CB/PB AUDIO OUT VIDEO AUDIO IN2 CR/PR S-VIDEO USB COMPONENT VIDEO RGB IN1 CONTROL RGB IN2 RGB OUT Video cable Stereo mini audio cable Audio out S-Video out AUDIO IN1 Y CB/PB AUDIO OUT VIDEO AUDIO - Hitachi CP-S335 | User Manual - Page 13
the power cord as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated for use with the - Hitachi CP-S335 | User Manual - Page 14
• If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the flower adheres your body or clothes, rinse well with water immediately minus terminals as indicated in the remote control. 3. Close the battery cover. Replace the battery cover in the direction of the arrow - Hitachi CP-S335 | User Manual - Page 15
for an extended period. • Replace the batteries whenever the remote control starts to malfunction. • When strong lights, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hit the projector's remote sensor, the remote control may cause to - Hitachi CP-S335 | User Manual - Page 16
RESET STANDBY/ON button STANDBY/ON LAMP TEMP POWER MENU INPUT POWER indicator Power switch Turning on the power POWER 1. Make sure that the power cord is firmly and correctly connected to the projector /ON button on the projector or remote control. The projector lamp will light up and the - Hitachi CP-S335 | User Manual - Page 17
RESET Selecting an input signal 1. Press the INPUT button on the projector. Each time you press the button, the projector switches its input port as below. RGB IN1 RGB IN2 COMPONENT VIDEO S-VIDEO VIDEO STANDBY/ON LAMP TEMP POWER MENU INPUT 1. Press the RGB button on the remote control - Hitachi CP-S335 | User Manual - Page 18
. POSITION MENU RGB IN1 RGB IN2 COMPONENT VIDEO S-VIDEO VIDEO ENTER ESC RESET Selecting an aspect ratio 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. At a RGB signal NORMAL 4:3 16 - Hitachi CP-S335 | User Manual - Page 19
MENU POSITION MENU ENTER ENTER 2. Use the cursor buttons to adjust the picture position. ESC RESET ESC RESET When you want to reset the operation, press the RESET button on the remote control during the operation. To complete this operation, press the POSITION button again. Even if - Hitachi CP-S335 | User Manual - Page 20
and restore the screen to normal, press the FREEZE button again. ESC ENTER RESET ● The projector automatically exits the FREEZE mode when the input signal changes, or when one of the projector's buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME - Hitachi CP-S335 | User Manual - Page 21
computer. • Before connecting, read the manuals of the computer you will connect. function is not available while the lamp is warming up (the POWER keyboard control 1. Connect the projector's USB port to the computer key Remote control operation Use buttons Press ENTER button Press RESET button - Hitachi CP-S335 | User Manual - Page 22
STANDBY/ON LAMP TEMP POWER MENU INPUT MENU button POSITION MENU Cursor buttons ENTER ENTER button ESC RESET RESET button VIDEO button ► on the projector or remote control, or the ENTER button on the remote control to progress. WHISPER MIRROR RESET FILTER TIME LANGUAGE NORMAL NORMAL - Hitachi CP-S335 | User Manual - Page 23
buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table. EASY MENU ASPECT 4:3 KEYSTONE +0 MODE NORMAL BRIGHT +0 CONTRAST +0 COLOR +0 TINT +0 SHRPNESS +3 WHISPER NORMAL MIRROR NORMAL RESET EXECUTE FILTER - Hitachi CP-S335 | User Manual - Page 24
the filter timer which counts use time of air filter. A dialog is displayed to make sure. Selecting RESET using the button ▲ performs reset. See the item FILTER TIME of section OPTION menu (37). Select the LANGUAGE to toggle the menu language. Refer to description of LANGUAGE in the SCREEN menu - Hitachi CP-S335 | User Manual - Page 25
table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] PICTURE - Hitachi CP-S335 | User Manual - Page 26
Multifunctional settings PICTURE Menu (continued) Item Description Using the buttons ▲/▼ switches the mode of color temperature. HIGH MIDDLE LOW CUSTOM COLOR TEMP COLOR TINT SHARPNESS To adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a - Hitachi CP-S335 | User Manual - Page 27
then pressing the button ► or the ENTER button performs each function. LOAD1 LOAD2 LOAD3 LOAD4 MY MEMORY SAVE4 SAVE3 SAVE2 SAVE1 This projector has 4 numbered memories for adjustment data. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the memory whose number corresponds - Hitachi CP-S335 | User Manual - Page 28
performed. PICTURE ASPECT 4:3 IMAGE OVER SCAN 95 Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on INPUT V POSITION 25 SETUP H POSITION 142 SCREEN H PHASE 16 OPTION - Hitachi CP-S335 | User Manual - Page 29
RGB signal. • When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button on the remote control during this operation. Selecting this item performs the automatic adjustment feature. At a RGB signal The vertical - Hitachi CP-S335 | User Manual - Page 30
on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to with vertical frequency of 50 to 60 Hz for the models CP-X340 and CP-X345, or 50 to 72Hz for the model CP-S335. • When the TURN ON is selected, a moving - Hitachi CP-S335 | User Manual - Page 31
ENGLISH INPUT Menu (continued) Multifunctional settings Item INFORMATION Description Selecting this item displays a dialog titled "INPUT INFORMATION". It shows the information about the current input. INPUT-INFORMATION RGB 1024x768 @60.0 FRAME LOCK INPUT-INFORMATION S-VIDEO SECAM AUTO INPUT- - Hitachi CP-S335 | User Manual - Page 32
table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] PICTURE - Hitachi CP-S335 | User Manual - Page 33
table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] PICTURE - Hitachi CP-S335 | User Manual - Page 34
control when the picture is display. The picture will freeze and the frame for capturing appears. To stop performing, press the RESET or ESC button on the remote control. 2. Using the buttons adjust the frame position. Please move the frame to the position of the picture which you want to use - Hitachi CP-S335 | User Manual - Page 35
ENGLISH SCREEN Menu (continued) Multifunctional settings Item MESSAGE Description Using the buttons ▲/▼ turns on/off the message function. TURN ON TURN OFF When the TURN ON is selected, the following message function works. "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED - Hitachi CP-S335 | User Manual - Page 36
projector or remote control, or the ENTER button on the remote control to progress, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU SEARCH AUTO OFF LAMP TIME FILTER TIME SERVICE :SELECT - Hitachi CP-S335 | User Manual - Page 37
the button ► or the ENTER button on the remote control to progress. FAN SPEED FACTORY RESET GHOST SERVICE FAN SPEED Using the buttons ▲/▼ switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected - Hitachi CP-S335 | User Manual - Page 38
there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • If the indicators or a message prompts you to replace the lamp (see the section - Hitachi CP-S335 | User Manual - Page 39
of two claws to fix the lamp cover. Tabs 8. Slowly turn the projector so that the top is facing up. 9. Turn the projector on, and reset the lamp time using the LAMP TIME function of OPTION menu (36). Center point of claws Claws NOTE • When the lamp has been replaced after the message of "THE - Hitachi CP-S335 | User Manual - Page 40
will come even with the replacement lamp for this projector. 7. Position the cleaned projector on, and reset the filter time using the FILTER TIME function of OPTION menu (37). NOTE • Incorrectly resetting of the filter timer (resetting without replacement, or neglect of resetting after replacement - Hitachi CP-S335 | User Manual - Page 41
Do not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the - Hitachi CP-S335 | User Manual - Page 42
contact your dealer or service company. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on. Message Description CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. The time the lamp timer has counted - Hitachi CP-S335 | User Manual - Page 43
OFF, and clean or change the air filter by referring to the "Air Filter" section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer (37). NOTE • A lamp has a finite product life. Lamps are characterized by the fact that, after long hours of usage - Hitachi CP-S335 | User Manual - Page 44
the instructions within the table. If the same indication is displayed after the treatment, or if an indication other than the following is displayed, please contact your dealer or service company. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is - Hitachi CP-S335 | User Manual - Page 45
Troubleshooting Regarding the indicator lamps (continued) POWER LAMP item SERVICE of Filter". After cleaning or changed the air filter, please be sure to reset lamps may also be turned off. In such a case, press the "" (OFF) side of the power switch, and wait at least 45 minutes. After the projector - Hitachi CP-S335 | User Manual - Page 46
by using a cocktail stick or similar and the projector will restart. 3. Some setting may be wrong. Please use the FACTORY RESET function of SERVICE menu in the OPTION menu (37) to reset all settings to factory default. Then, if the problem is not removed after maintenance, please contact your - Hitachi CP-S335 | User Manual - Page 47
Troubleshooting level using the menu function 23, 25 or the remote control. The computer cannot detect the projector as a plug and play monitor. Make sure that the SETUP menu. 24, 32 The lamp is approaching the end of its product lifetime. Replace the lamp. 38, 39 Pictures appear blurry. - Hitachi CP-S335 | User Manual - Page 48
Warranty And After-Service Warranty and after-service If a problem occurs with the equipment, first refer to the "Troubleshooting" and run through the suggested checks. If this does not resolve the problem, please contact your dealer or the service company. They will tell you what warranty condition - Hitachi CP-S335 | User Manual - Page 49
Specifications (continued) Specifications ENGLISH 237.4 232.8 80.0 64.2 297.0 84.5 32.2 79.7 65.4 14.3 [unit: mm] 49 - Hitachi CP-S335 | User Manual - Page 50
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
 |
 |
1
ENGLISH
Projector
CP-S335/X340/X345
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING
►Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
This symbol indicates information that , if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION
This symbol indicates information that , if ignored, could result
possibly in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE
• The information in this manual is subject to chance without notice.
• The manufacture assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
Trademark acknowledgment
• VGA and XGA are registered trademarks of the International Business Machines
Corporation.
• Apple and Mac are registered trademarks of the Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of the Microsoft Corporation.
• Internet Explorer is a trademark of the Microsoft Corporation.
All other trademarks are the property of their respective owners.