Hitachi CP-SX1350 User Manual
Hitachi CP-SX1350 Manual
 |
View all Hitachi CP-SX1350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-SX1350 manual content summary:
- Hitachi CP-SX1350 | User Manual - Page 1
TEMP LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO MENU INTER RESET FOCUS ZOOM RGB M1-D INPUT KEYSTONE SEARCH Projector CP-SX1350 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING Before using the product, please read the "User's Manual Safety Guide" - Hitachi CP-SX1350 | User Manual - Page 2
video signals onto a screen. Little space is required for installation and large images can easily be realized. ●Ultra High Brightness Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp of the "User's Manual - Quick Guide". Your projector should come with the - Hitachi CP-SX1350 | User Manual - Page 3
The Air Filterʜʜʜʜ39 Other Care 40 Caring For The Inside Of The Projector 40 Caring For The Lens ʜʜʜʜʜ40 Caring For The Cabinet And Remote Control 40 Troubleshooting 41 Related Messages 41 Regarding The Indicator Lamps 43 Phenomena That May Easily Be Mistaken For Machine Defects ʜ45 Warranty - Hitachi CP-SX1350 | User Manual - Page 4
is projected from here. 6 Filter cover An air filter is inside. Projector (Front/Right) - AB 8 7 D L F LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO MENU STANDBY/ON TEMP LAMP G FOCUS ZOOM 3 E AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 - Hitachi CP-SX1350 | User Manual - Page 5
(continued) Control Buttons 7 5e 8 6 9 y 4 0 t = ur wq 1 23 TEMP LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO MENU INTER RESET FOCUS ZOOM RGB M1-D INPUT KEYSTONE SEARCH Control Panel on the Projector Remote Control 1 STANDBY/ON button 4 LENS SHIFT buttons 6 SEARCH - Hitachi CP-SX1350 | User Manual - Page 6
. • Do not set up and move the projector, while it is hot. • Install the projector in a suitable environment according to instructions of the "User's Manual - Safety Guide" and this manual. • The power outlet should be close to the projector and easily accessible. Refer to the illustrations and - Hitachi CP-SX1350 | User Manual - Page 7
degrees. 1 Press and hold in the elevator buttons. Elevator buttons TEMP LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO MENU INTER RESET FOCUS ZOOM RGB M1-D INPUT KEYSTONE SEARCH 2 Raise or lower the projector to the desired height and then release the elevator buttons. When you - Hitachi CP-SX1350 | User Manual - Page 8
to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer. NOTE - Hitachi CP-SX1350 | User Manual - Page 9
for connecting your devices. See the rear of the projector. You can see the ports. Examples of connection with a computer LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO - Hitachi CP-SX1350 | User Manual - Page 10
with a VCR/DVD Player VCR/DVD Player Projector Audio out (R) Audio out (L) Video out R-AUDIO IN-L VIDEO R-AUDIO IN AUDIO IN-L H VIDEO IN I ■ If using a s-video signal S-video out S-video cable J S -VIDEO Audio out (R) Audio out (L) R-AUDIO IN-L VIDEO R-AUDIO IN H AUDIO IN-L AUDIO IN1 - Hitachi CP-SX1350 | User Manual - Page 11
connector of the power cord to the AC inlet of the projector. 2 Firmly plug the power cord's plug into the outlet. LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE CONTROL CONTROL NETWORK AUDIO IN2 - Hitachi CP-SX1350 | User Manual - Page 12
point the laser beam at other people. The laser beam can cause vision problems. CAUTION • Use of controls or adjustments or performance of procedures other 10-7 HIGASHIKANDA CHIYODA-KU,TOKYO,JAPAN 101-0031 MADE IN CHINA LASER INDICATOR VIDEO RGB + STANDBY/ON + - + - - LENS SHIFT ZOOM FOCUS - Hitachi CP-SX1350 | User Manual - Page 13
LAMP INTER RGB LENS SHIFT BNG COMPONENT S-VIDEO STANDBY/ON VIDEO LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO MENU STANDBY/ON TEMP LAMP of the ID number of the projector you want to control. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS - Hitachi CP-SX1350 | User Manual - Page 14
• Before connecting, read the manuals of the device you will connect keyboard of the computer. Connect the M1-D port of the projector to the computer via the M1-D cable. Then functions illustrated devices, after connecting cable. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - - Hitachi CP-SX1350 | User Manual - Page 15
the message is visible. The projector lamp will go off, and the STANDBY/ON indicator will begin blanking orange. Then the STANDBY/ON indicator will stop blinking LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 - Hitachi CP-SX1350 | User Manual - Page 16
RGB BNC SEARCH button VIDEO S-VIDEO COMPONENT ■ Using SEARCH button Press the SEARCH button of the projector or the remote control. FOCUS buttons LENS SHIFT COMPONENTBNG S-VIDEO RGB M1-D INPUT INTER KEYSTONE SEARCH RESET VIDEO STANDBY/ON MENU TEMP LAMP FOCUS ZOOM AUDIO IN1 REMOTE - Hitachi CP-SX1350 | User Manual - Page 17
size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting. ■ For a video signal or s-video signal The signal type mode best suited for the respective input signal will be selected automatically. This function is available only - Hitachi CP-SX1350 | User Manual - Page 18
certain degradation may appear on the picture. Also, please note that it may not function correctly with some input. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER PREVIOUS NEXT MOUSE ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF - Hitachi CP-SX1350 | User Manual - Page 19
"SCREEN Menu". 2 Press the BLANK button again to remove the blank screen, and return to the input signal screen. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER PREVIOUS NEXT MOUSE ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF - Hitachi CP-SX1350 | User Manual - Page 20
the screen, displaying a dialog or a menu, adjusting the picture, changing the input signal) is pressed, or a button of projector is pressed. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER PREVIOUS NEXT MOUSE ESC MENU POSITION RESET AUTO MAGNFY PinP - Hitachi CP-SX1350 | User Manual - Page 21
is input. 1 Press the PinP button. The child window with a picture of a video signal will appear. 2 Press the PinP button again to change the size of the Please refer to the section "Adjusting The Volume". LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER - Hitachi CP-SX1350 | User Manual - Page 22
This projector has the button. The menu will appear on the screen. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER OPTION NETWORK : SELECT VOLUME SPEAKER IR REMOTE IR REMOTE ID LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON ALL 1234 h 4321 h 3 Use - Hitachi CP-SX1350 | User Manual - Page 23
can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT 16:9 REAL The NORMAL keeps the original aspect ratio of the input signal. ■ For a video signal / no signal 4:3 16:9 SMALL REAL memo For a HDTV signal of 1125i(1080i) - Hitachi CP-SX1350 | User Manual - Page 24
the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION Weak memo This item can be selected only at a video signal. TINT Adjust the tint using the / buttons. : Green Red memo This item - Hitachi CP-SX1350 | User Manual - Page 25
using the / buttons, and then press the (or the ENTER) button to perform the function.: LOAD1 LOAD2 LOAD3 LOAD4 SAVE1 SAVE2 SAVE3 SAVE4 This projector has 4 numbered memories for adjustment data. Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment data on the memory whose number - Hitachi CP-SX1350 | User Manual - Page 26
be performed. Perform each operation in accordance with the SCREEN OPTION RESET instructions in the table below. NETWORK : SELECT memo This menu cannot . : Small Large memo This item can be selected only at a video signal. memo When this adjustment is too large, certain degradation may appear - Hitachi CP-SX1350 | User Manual - Page 27
below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO memo This item can be selected only at a RGB signal or a component video signal other than a COMPONENT port input of 525i(480i)/625i(576i)/SCART RGB. - Hitachi CP-SX1350 | User Manual - Page 28
refer to the section "Displaying the Child Window". Select a signal input port to display just when the projector is turned on, using the / buttons. : LAST INPUT M1-D RGB BNC COMPONENT S-VIDEO VIDEO Selecting the LAST INPUT selects the port that was used at the last time. Pressing the (or the - Hitachi CP-SX1350 | User Manual - Page 29
Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE color lack), please select the suitable mode to the item "VIDEO" of the INPUT menu. Set the time using the / time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON indicator begins - Hitachi CP-SX1350 | User Manual - Page 30
memo When the TURN ON is selected, pressing the RGB button selects the M1-D ports, and pressing the VIDEO button selects the COMPONENT port. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will return to the state it - Hitachi CP-SX1350 | User Manual - Page 31
) SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT BLANK BLACK START UP ORIGINAL MyScreen MyScreen LOCK - Hitachi CP-SX1350 | User Manual - Page 32
Multifunctional Settings (continued) SCREEN Menu (continued) Item MESSAGE RESET Description Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, the following message function works. The message of the "AUTO IN PROGRESS" for the auto adjustment. - Hitachi CP-SX1350 | User Manual - Page 33
instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT VOLUME SPEAKER IR REMOTE IR REMOTE ID LAMP TIME FILTER TIME SERVICE control using the / buttons. : ALL 1 2 3 The projector is controlled by the remote control whose ID CHANGE switch is set - Hitachi CP-SX1350 | User Manual - Page 34
use this function in using a projector at highlands etc. memo Note that the projector is noisier when the HIGH is choose DISABLE to disable the automatic adjustment, and adjust manually. LENS TYPE Select the lens type currently used using LAMP TIME", "FILTER TIME" and "SERVICE" are not reset. 34 - Hitachi CP-SX1350 | User Manual - Page 35
disabled at the NETWORK menu. The IP Address is identification number of the projector on the Network. SETUP 1. Set the IP Address using the / buttons ON TURN OFF NETWORK DHCP TURN ON TURN OFF If your Network doesn't support the DHCP function, select the TURN OFF. INFORMATION Pressing the (or - Hitachi CP-SX1350 | User Manual - Page 36
When your Network doesn't support the DHCP function or When you use a fixed address even if your Network can support the DHCP function Please set computer connected to the Network. Input the same IP address as set to the projector onto the Web Browser on the computer connected to LAN. ex. Case of IP - Hitachi CP-SX1350 | User Manual - Page 37
time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • If the indicators or a message prompts you - Hitachi CP-SX1350 | User Manual - Page 38
soon as possible. 1 Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes. 2 Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number. If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer - Hitachi CP-SX1350 | User Manual - Page 39
read the "User's Manual - Safety Guide. • Before caring, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. • Use only the air filter of the specified type NJ08081. • Do not use the projector with the air filter - Hitachi CP-SX1350 | User Manual - Page 40
Care WARNING • Please carefully read the "User's Manual - Safety Guide". • Before caring, make sure the power switch the lens directly with your hand. Caring For The Cabinet And Remote Control 1 Turn off the projector, and unplug the power cord. 2 Wipe lightly with gauze or a soft cloth. memo If - Hitachi CP-SX1350 | User Manual - Page 41
Troubleshooting following appears, please contact your dealer or service company. memo Although these messages will lamp has a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This projector - Hitachi CP-SX1350 | User Manual - Page 42
caring for the air filter, please be sure to reset the filter timer. SEE MANUAL FURTHER INFO. PLEASE CHECK THAT THE FILTER HAS BEEN CLEANED. FAILURE TO CLEAN MAY RESULT IN DAMAGE TO THE PROJECTOR. SEE MANUAL FURTHER INFO. The internal portion temperature is rising. Please turn the power OFF, and - Hitachi CP-SX1350 | User Manual - Page 43
Troubleshooting (continued) Regarding The Indicator Lamps Lighting and flashing of the STANDBY/ON indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. If the same indication is - Hitachi CP-SX1350 | User Manual - Page 44
. Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. If the same indication is displayed after the treatment - Hitachi CP-SX1350 | User Manual - Page 45
Troubleshooting (continued) Phenomena That May Easily Be Mistaken For Machine Defects WARNING • Never use the projector , contact your dealer or service company. Before requesting repair, projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp - Hitachi CP-SX1350 | User Manual - Page 46
Troubleshooting Press the BLANK button to return to the input signal screen. 19 Video screen display freezes. The FREEZE function is working. Press the FREEZE button item WHISPER in the MAIN menu. The lamp is approaching the end of its product lifetime. Replace the lamp. 23 23 37, 38 Either the - Hitachi CP-SX1350 | User Manual - Page 47
Troubleshooting" and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service Parts Lamp Air filter Others Specification Liquid crystal projector manual. 7.7 kg RGB input ports RGB M1-D BNC (R, G, B, H, V) Video input ports VIDEO IN S-VIDEO - Hitachi CP-SX1350 | User Manual - Page 48
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
1
Projector
CP-SX1350
CP-SX1350
User's Manual - Operating Guide
User's Manual - Operating Guide
Thank you for purchasing this projector.
TRADEMARK ACKNOWLEDGMENT :
• VGA and XGA are registered trademarks of International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Internet Explorer is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
WARNING
Before using the product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted without
express written consent.
NOTE