Hitachi CP-X1230 User Manual
Hitachi CP-X1230 Manual
 |
View all Hitachi CP-X1230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-X1230 manual content summary:
- Hitachi CP-X1230 | User Manual - Page 1
Projector CP-X1230 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. NOTE • The - Hitachi CP-X1230 | User Manual - Page 2
lamp and a highly efficient optical system. ●Whisper Mode Equipped Special mode is available for reducing projector noise to achieve quieter operation. ●User Memory Function This projector "Contents Of Package" of the "User's Manual - Quick Guide". Your projector should come with the items shown - Hitachi CP-X1230 | User Manual - Page 3
The Air Filter 36 Other Care 37 Caring For The Inside Of The Projector 37 Caring For The Lens 37 Caring For The Cabinet And Remote Control 37 Troubleshooting 38 Related Messages 38 Regarding The Indicator Lamps 40 Phenomena That May Easily Be Mistaken For Machine Defects ·····42 Warranty And - Hitachi CP-X1230 | User Manual - Page 4
foot 3 Remote sensor 4 Lens cap 5 Lens The picture is projected from here. 6 Filter cover An air filter is inside. Projector (Front/Right) 9 D A BG F E 3 K C HI J 7 8 Projector (Rear/Left) A RGB port B RGB OUT port C BNC port D AUDIO IN 1 port E AUDIO IN 2 port F CONTROL port G AUDIO OUT - Hitachi CP-X1230 | User Manual - Page 5
COMPONENT 0 S-VIDEO - VIDEO = STANDBY/ON ENTER e 1 7 KEYSTONE 6 SEARCH t RESET r MENU TEMP LAMP 23 FOCUS w ZOOM q Control Panel on the Projector 1 STANDBY/ON button and STANDBY/ON indicator 2 TEMP indicator 3 LAMP indicator 4 VOLUME buttons 5 INPUT dial 6 SEARCH button 7 KEYSTONE button - Hitachi CP-X1230 | User Manual - Page 6
. • Do not set up and move the projector, while it is hot. • Install the projector in a suitable environment according to instructions of the "User's Manual - Safety Guide" and this manual. • The power outlet should be close to the projector and easily accessible. Refer to the illustrations and - Hitachi CP-X1230 | User Manual - Page 7
feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. hold in the elevator buttons. Elevator buttons 2 Raise or lower the projector to the desired height and then release the elevator buttons. When you - Hitachi CP-X1230 | User Manual - Page 8
devices to the projector, read thoroughly the "User's Manual - Safety Guide", this manual and the manual of each instruction manual of the corresponding laptop computer. NOTE • Some computers may have multiple display screen modes. Use of some of these modes may not be compatible with this projector - Hitachi CP-X1230 | User Manual - Page 9
can see the ports. Examples of connection with a computer Computer RGB out RGB cable Audio out Stereo Mini cable RS-232C port RS-232C cable Projector A RGB D AUDIO IN 1 F CONTROL D AUDIO IN 1 AUDIO IN2 A RGB REMOTE CONTROL F CONTROL RGB OUT AUDIO OUT CR/PR CB/PB Y R/CR/PR G/Y B/CB/PB - Hitachi CP-X1230 | User Manual - Page 10
Setting Up (continued) Examples of connection with a VCR/DVD Player VCR/DVD Player Projector Audio out (R) Audio out (L) Video out R-AUDIO IN-L VIDEO R-AUDIO IN AUDIO IN-L H VIDEO IN I ■ If using a s-video signal S-video out S-video cable J S -VIDEO Audio - Hitachi CP-X1230 | User Manual - Page 11
IN S-VIDEO IN Connecting to a speaker (with amplifier) Speaker Audio in Stereo Mini cable Projector G AUDIO OUT AUDIO IN 1 AUDIO IN2 RGB G REMOTE CONTROL RGB OUT AUDIO OUT CR and/or electrical shock. Please adhere to the "User's manual - Safety Guide" and the following. • Only plug the power - Hitachi CP-X1230 | User Manual - Page 12
Remote Control Putting Batteries CAUTION • About the battery • Keep a battery away from children and pets. • Use only the battery specified: two AA batteries. • Do not mix new battery with used one. • Make sure the plus and minus terminals are correctly aligned when loading the battery (as - Hitachi CP-X1230 | User Manual - Page 13
range (such as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function. Adjust please try. • Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from - Hitachi CP-X1230 | User Manual - Page 14
button / indicator 2 Set the power switch to [ | ] (ON). The STANDBY/ON indicator will light to solid orange. 3 Press the STANDBY/ON button. The projector lamp will light up and the STANDBY/ON indicator will begin blinking green. When the power is completely on, the indicator will stop blinking and - Hitachi CP-X1230 | User Manual - Page 15
COMPONENT SEARCH button RGB BNC COMPONENT S-VIDEO VIDEO INPUT ENTER KEYSTONE SEARCH RESET MENU VIDEO S-VIDEO ■ Using SEARCH button STANDBY/ON INPUT dial TEMP LAMP Press the SEARCH button of the projector or the remote control. Pressing the button automatically cycles through input ports - Hitachi CP-X1230 | User Manual - Page 16
RGB SEARCH ASPECT PinP AUTO BLANK MAGNIFY ON OFF FREEZE VOLUME MUTE KEYSTONE - FOCUS + POSITION - ZOOM + MENU ASPECT button ESC ENTER RESET Using The Automatic Adjustment Feature memo The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not - Hitachi CP-X1230 | User Manual - Page 17
in adjusting POSITION the position. 2 Use the cursor buttons / / / to adjust the position. memo When you want to initialize the position, press the RESET button during adjustment. 3 Press the POSITION button again to close the dialog and complete this operation. memo Even if you don't do anything - Hitachi CP-X1230 | User Manual - Page 18
few seconds. VIDEO RGB SEARCH ASPECT PinP AUTO BLANK MAGNIFY ON OFF FREEZE VOLUME MUTE KEYSTONE - FOCUS + POSITION - ZOOM + MENU ESC ENTER RESET VOLUME button Cursor buttons Muting The Sound 1 Press the MUTE button. As illustrated on the right, a dialog will appear on the screen indicating - Hitachi CP-X1230 | User Manual - Page 19
RGB SEARCH ASPECT PinP AUTO BLANK MAGNIFY ON OFF FREEZE VOLUME MUTE KEYSTONE - FOCUS + POSITION - ZOOM + MENU ESC ENTER RESET FREEZE button NOTE • If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as - Hitachi CP-X1230 | User Manual - Page 20
INP. POSIT." of the table of the section "INPUT Menu". ESC ENTER RESET Selecting An Audio Input memo This feature is available only when the child VOLUME button Cursor buttons Video (Audio input for the child window) ESC RESET memo You also can adjust the volume using the cursor buttons / - Hitachi CP-X1230 | User Manual - Page 21
Multifunctional Settings Using The Menu Functions This projector has the following menus: MAIN, PICTURE-1, button. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION VOLUME SPEAKER IR REMOTE LAMP TIME FILTER TIME SERVICE RESET : SELECT 16 TURN ON 1234 h 4321 h OPTION SPEAKER TURN ON TURN - Hitachi CP-X1230 | User Manual - Page 22
below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO NEDERLANDS PORTUGUÊS SVENSKA SUOMI POLSKI Select the EXECUTE using the button to reset the MAIN menu items. : EXECUTE CANCEL The items of the MAIN - Hitachi CP-X1230 | User Manual - Page 23
below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO 100 memo The R, G and B can be selected only when the : SELECT USER is selected under the COLOR TEMP. GAMMA GAMMA Adjust the gamma data using the - Hitachi CP-X1230 | User Manual - Page 24
function.: LOAD1 LOAD2 LOAD3 LOAD4 MY MEMORY SAVE1 SAVE2 SAVE3 SAVE4 This projector has 4 numbered memories for adjustment data. Performing the SAVE1, SAVE2, the picture automatically depending on the data. RESET Select the EXECUTE using the button to reset the PICTURE-1 menu items. : EXECUTE - Hitachi CP-X1230 | User Manual - Page 25
table below can INPUT AUTO H SIZE OVER SCAN 1344 95 be performed. Perform each operation in accordance with the SCREEN OPTION RESET instructions in the table below. : SELECT Item V POSITION H POSITION H PHASE H SIZE Description Adjust the vertical position using the / buttons. : Up Down - Hitachi CP-X1230 | User Manual - Page 26
) INPUT Menu With the INPUT menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION : SELECT COLOR SPACE AUTO COMPONENT COMPONENT VIDEO AUTO 3D-YCS TURN - Hitachi CP-X1230 | User Manual - Page 27
the Child Window". Select a signal input port to display just when the projector is turned on, using the / buttons. : LAST INPUT M1-D RGB TURN OFF will be automatically selected to this item. RESET Select the EXECUTE using the button to reset the INPUT menu items. : EXECUTE CANCEL The items - Hitachi CP-X1230 | User Manual - Page 28
with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION ADJUST POWER OFF POWER ON SEARCH RESET : SELECT 1min 0min ex. When the time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON indicator begins blinking when the passed time - Hitachi CP-X1230 | User Manual - Page 29
VIDEO button selects the COMPONENT port. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it state it was in prior to the search. Select the EXECUTE using the button to reset the AUTO menu items. : EXECUTE CANCEL The items of the AUTO menu are - Hitachi CP-X1230 | User Manual - Page 30
table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SIZE x1 MyScreen LOCK TURN OFF MENU POSITION MESSAGE TURN ON RESET Item Description BLANK Select a type of the BLANK screen using the - Hitachi CP-X1230 | User Manual - Page 31
picture? The MyScreen menu appears. Do you capture the picture from the current screen? ESC :NO ENT :YES NO: Press the ESC/RESET button If the ESC/RESET button is pressed ... YES: Press the ENTER button The picture freeze and the frame for capturing appears. Move the frame to the position - Hitachi CP-X1230 | User Manual - Page 32
below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION VOLUME SPEAKER IR REMOTE LAMP TIME FILTER TIME SERVICE RESET : SELECT 16 TURN ON 1: 2: 3: 1234 h 4321 h Item VOLUME SPEAKER IR REMOTE - Hitachi CP-X1230 | User Manual - Page 33
SERVICE RESET Description Pressing the (or the ENTER) button calls the SERVICE menu. SERVICE a projector at highlands etc. memo Note that the projector is the automatic adjustment, and adjust manually. LENS LOCK Select the TURN EXECUTE using the button to reset the OPTION menu items. : - Hitachi CP-X1230 | User Manual - Page 34
the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp - Hitachi CP-X1230 | User Manual - Page 35
2 tabs of the lamp cover to the projector, put the lamp cover on the projector. Then push the point of the lamp cover to fix it, as shown in the Figure. Make sure that the lamp cover does't come up. Tabs 7 Turn on the projector, and reset the lamp timer. (1) While the projector running, press the - Hitachi CP-X1230 | User Manual - Page 36
read the "User's Manual - Safety Guide. • Before caring, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. • Use only the air filter of the specified type NJ08081. • Do not use the projector with the air - Hitachi CP-X1230 | User Manual - Page 37
Other Care WARNING • Please carefully read the "User's Manual - Safety Guide". • Before caring, make sure the power the lens directly with your hand. Caring For The Cabinet And Remote Control 1 Turn off the projector, and unplug the power cord. 2 Wipe lightly with gauze or a soft cloth. memo If - Hitachi CP-X1230 | User Manual - Page 38
the lamp, please be sure to reset the lamp timer. (This table is continued to the following page.) NOTE • A lamp has a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This projector is - Hitachi CP-X1230 | User Manual - Page 39
Troubleshooting (continued) Related Messages (continued) Message Description CLEAN THE AIR FILTER POWER OFF FIRST, THEN CLEAN THE AIR FILTER. AFTER CLEANING THE AIR FILTER, RESET THE FILTER TIMER. The time the filter timer has counted has reached 100 hours. Please clear or change the air filter - Hitachi CP-X1230 | User Manual - Page 40
Troubleshooting (continued) Regarding The Indicator Lamps Lighting and flashing of the STANDBY/ON indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. If the same indication is - Hitachi CP-X1230 | User Manual - Page 41
to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. the air filter, please be sure to reset the filter timer. After the treatment, resent the power to ON. 41 - Hitachi CP-X1230 | User Manual - Page 42
Troubleshooting (continued) Phenomena That May Easily Be Mistaken For Machine Defects WARNING • Never use the projector , contact your dealer or service company. Before requesting repair, projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp - Hitachi CP-X1230 | User Manual - Page 43
Troubleshooting (continued) Phenomena That May Easily Be Mistaken For Machine Defects ( working. Select the NORMAL to the item WHISPER in the MAIN menu. The lamp is approaching the end of its product lifetime. Replace the lamp. 22 22 34, 35, 38 Pictures appear blurry. Input signal changes with - Hitachi CP-X1230 | User Manual - Page 44
Troubleshooting" and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service Lamp Air filter Others Specification Liquid crystal projector figure of the section "TECHNICAL" of the end of this manual. 6.9 kg RGB input ports RGB BNC (R, G, B,
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
1
Projector
CP-X1230
CP-X1230
User's Manual - Operating Guide
User's Manual - Operating Guide
Thank you for purchasing this projector.
TRADEMARK ACKNOWLEDGMENT :
• VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Internet Explorer is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
WARNING
Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
NOTE