Hitachi CP-X2 Technical Manual
Hitachi CP-X2 - XGA LCD Projector Manual
 |
UPC - 050585151079
View all Hitachi CP-X2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-X2 manual content summary:
- Hitachi CP-X2 | Technical Manual - Page 1
Projector CPX2/CPX6 User's Manual (detailed) Technical Example of PC signal Resolution (H x V) H. frequency (kHz) Be sure to check jack type, signal level, timing and resolution before connecting this projector to a PC. • Some PCs may have multiple display screen modes. Use of some of these - Hitachi CP-X2 | Technical Manual - Page 2
Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Data H. Sync. Display interval (C) - Hitachi CP-X2 | Technical Manual - Page 3
) - - (2) for Component signal •Y : Component video Y, 1.0±0.1 Vp-p, 75 Ω terminator with composite • CR/PR : Component video CR/PR, 0.7±0.1 Vp-p, 75 Ω terminator • CB/PB : Component video CR/PR, 0.7±0.1 Vp-p, 75 Ω terminator Pin 1 CR/PR Signal Pin 10 Ground Signal 2Y 11 (No connection - Hitachi CP-X2 | Technical Manual - Page 4
Connection to the ports (continued) B E USB STORAGE USB LAN DC 5V 0.5A K COMPUTER IN S-VIDEO VIDEO AUDIO OUT AUDIO IN CD B S-VIDEO Mini DIN 4pin jack 12 34 Pin Signal 1 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator 2 - Hitachi CP-X2 | Technical Manual - Page 5
Connection to the ports (continued) FG USB STORAGE USB LAN DC 5V 0.5A K COMPUTER IN S-VIDEO VIDEO AUDIO OUT AUDIO IN F USB STORAGE USB A type jack 4321 Pin Signal 1 +5V 2 - Data 3 + Data 4 Ground G USB USB B type jack 43 Pin Signal 12 1 +5V 2 - Data 3 + Data 4 Ground - Hitachi CP-X2 | Technical Manual - Page 6
4 5 6 RX - Signal - Pin 7 8 CTS- Signal - - I SD card slot The SD card slot is in the side SD CARD opposite to the lamp cover of the SD card slot cover projector. I SD CARD SD card slot SD card slot 876543219 Pin Signal 1 CD/DAT 3 2 CMD 3 VSS Pin 4 VDD 5 CLK 6 VSS Signal Pin - Hitachi CP-X2 | Technical Manual - Page 7
Command Control via the Network Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Configure the following items form a web browser when command control is used. Port Settings Netowrk Control - Hitachi CP-X2 | Technical Manual - Page 8
byte_5 Setting code low high Action (byte_0 - 1) Action Classification Content 1 Set Change setting to desired value. 2 Get Read projector internal setup value. 4 Increment Increment setup value by 1. 5 Decrement Decrement setup value by 1. 6 Execute Run a command. Requesting - Hitachi CP-X2 | Technical Manual - Page 9
data length is greater than indicated by the data length code, the projector ignore the excess data code. Conversely when the data length is shorter than back to the PC. NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data. • Provide an interval of at least - Hitachi CP-X2 | Technical Manual - Page 10
data. ACK reply: '06H' + 'xxH' NAK reply: '15H' + 'xxH' Error reply: '1CH' + 'xxxxH' + 'xxH' Data reply: '1DH' + 'xxxxH' + 'xxH' Projector busy reply: '1FH' + 'xxxxH' + 'xxH' Authentication error reply: '1FH' + '0400H' + 'xxH' ('xxH' : connection ID) Automatic Connection Break The TCP connection - Hitachi CP-X2 | Technical Manual - Page 11
[Example return] 00 00 [Normal] 04 00 [Temp error] 08 00 [Filter error] 01 00 02 00 [Cover error] [Fan error] 05 00 06 00 [Air flow error] [Lamp time error] 09 00 10 00 (Filter missing error)(Inner Sencer error) 03 00 [Lamp error] 07 00 [Cold error] BE EF 03 06 00 89 - Hitachi CP-X2 | Technical Manual - Page 12
BE EF 03 06 00 User Gamma Point 6 Get BE EF 03 06 00 Increment BE EF 03 06 00 User Gamma Point 7 User Gamma Point 8 Decrement Get CB F8 5B F9 AB F9 FB FF 6B FE C8 F5 34 F4 52 F4 83 F5 70 F4 16 F4 C7 F5 Command Data Action Type Setting Code 01 00 01 00 01 00 01 - Hitachi CP-X2 | Technical Manual - Page 13
00 05 00 06 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 01 00 02 00 B3 30 22 02 22 02 22 0A 70 03 22 03 22 03 22 0B 70 01 22 01 22 01 22 09 70 14 20 14 20 14 20 14 20 15 20 15 20 - Hitachi CP-X2 | Technical Manual - Page 14
05 00 02 00 04 00 05 00 06 00 06 00 01 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 02 00 09 22 09 22 09 22 27 70 00 - Hitachi CP-X2 | Technical Manual - Page 15
03 06 00 BE EF 03 06 00 BE EF 03 06 00 BE EF 03 06 00 CRC CB D6 5B D7 F8 D6 B9 D3 DF D3 0E D2 08 D0 3B 23 AB 22 08 23 02 00 04 00 05 00 02 00 04 00 05 00 01 00 01 00 02 00 01 00 01 00 01 00 02 00 01 00 01 00 02 00 01 00 01 00 02 00 14 30 14 30 14 30 07 20 07 - Hitachi CP-X2 | Technical Manual - Page 16
C8 D8 CB CB 0B D2 9B D3 38 D2 3B EF AB EE 08 EF 8F D6 1F D7 BC D6 B6 D6 26 D7 85 D6 Command Data Action Type Setting Code 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 02 - Hitachi CP-X2 | Technical Manual - Page 17
BE EF 03 06 00 TURN ON BE EF 03 06 00 Get BE EF 03 06 00 LAMP TIME Get BE EF 03 06 00 LAMP TIME Reset Execute BE EF 03 06 00 FILTER TIME Get BE EF 03 06 00 FILER TIME Reset Execute BE EF 03 06 00 AUTO
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
±
Projector
CPX2/CPX6
User's Manual (detailed)
Technical
Example of PC signal
Resolution (H x V)
H. frequency (kHz)
V. frequency (Hz)
Rating
Signal mode
720 x 400
37.9
85.0
VESA
TEXT
640 x 480
3±.5
59.9
VESA
VGA (60Hz)
640 x 480
37.9
72.8
VESA
VGA (72Hz)
640 x 480
37.5
75.0
VESA
VGA (75Hz)
640 x 480
43.3
85.0
VESA
VGA (85Hz)
800 x 600
35.2
56.3
VESA
SVGA (56Hz)
800 x 600
37.9
60.3
VESA
SVGA (60Hz)
800 x 600
48.±
72.2
VESA
SVGA (72Hz)
800 x 600
46.9
75.0
VESA
SVGA (75Hz)
800 x 600
53.7
85.±
VESA
SVGA (85Hz)
832 x 624
49.7
74.5
Mac ±6” mode
±024 x 768
48.4
60.0
VESA
XGA (60Hz)
±024 x 768
56.5
70.±
VESA
XGA (70Hz)
±024 x 768
60.0
75.0
VESA
XGA (75Hz)
±024 x 768
68.7
85.0
VESA
XGA (85Hz)
±±52 x 864
67.5
75.0
VESA
±±52 x 864 (75Hz)
±280 x 960
60.0
60.0
VESA
±280 x 960 (60Hz)
±280 x ±024
64.0
60.0
VESA
SXGA (60Hz)
±280 x ±024
80.0
75.0
VESA
SXGA (75Hz)
±280 x ±024
9±.±
85.0
VESA
SXGA (85Hz)
±600 x ±200
75.0
60.0
VESA
UXGA (60Hz)
±280 x 768
47.7
60.0
VESA
W-XGA (60Hz)
±400 x ±050
65.2
60.0
VESA
SXGA+ (60Hz)
NOTE
• Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(±600x±200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• Automatically adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.