Hitachi CP-X3511 User Manual

Hitachi CP-X3511 Manual

Get Hitachi CP-X3511 PDF manuals and user guides View all Hitachi CP-X3511 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-X3511 manual content summary:

  • Hitachi CP-X3511 | User Manual - Page 1
    Projector CP-X2510Z/CP-X3010Z CP-X2011/CP-X2511/CP-X3011/CP-X3511 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a
  • Hitachi CP-X3511 | User Manual - Page 2
    Maintenance 53 Adjusting the position 19 Replacing the lamp 53 Correcting the keystone distortions. . . 20 Cleaning and replacing the air filter . . 55 Using the magnify feature 20 Other care 57 Temporary freezing the screen. . . . . 21 Troubleshooting 58 Temporarily blanking the screen
  • Hitachi CP-X3511 | User Manual - Page 3
    without external speakers. Preparations Checking the contents of package Your projector should come with the items shown below. Check that all the (2) Power cord (3) Computer cable (4) Lens cover (2) (6) (5) User's manuals (Book x1, CD x1) (3) (6) Security label NOTE • Keep the original
  • Hitachi CP-X3511 | User Manual - Page 4
    after use, since it is too hot. ►Do not look into the lens or vents while the lamp is on, since the strong light is not good for your eyes. ►Do not handle the elevator buttons without holding the projector, since the projector may drop down. CAUTION ►Maintain normal ventilation to prevent the
  • Hitachi CP-X3511 | User Manual - Page 5
    POWER indicator (&11, 14, 59) (5) TEMP indicator (&59) (6) LAMP indicator (&59) Rear panel (&9) (1) AUDIO IN1 port (2) AUDIO IN2 port (12) (13) (8) (7) CAUTION ►Use the shutdown switch only when the projector is not turned off by normal procedure, since pushing this switch stops operation of the
  • Hitachi CP-X3511 | User Manual - Page 6
    Part names Remote control (1) VIDEO button (&16) (2) COMPUTER button (&16) (2) (1) (3) SEARCH button (&17) (6) (4) STANDBY/ON button (&14) (5) (5) ASPECT button (&17) (6) AUTO button (&19) (7) BLANK button (&21) (16) (8) (9) (19) (8) MAGNIFY - ON button (&20) (17) (9) MAGNIFY - OFF
  • Hitachi CP-X3511 | User Manual - Page 7
    objects such as walls. • For the case of installation in a special state such as ceiling mount, the specified mounting accessories (&64) and service may be required. Before installing the projector, consult your dealer about your installation. a Screen size (diagonal) type (inch) m 30 0.8 40 1.0 50
  • Hitachi CP-X3511 | User Manual - Page 8
    , and leave installing and removing the projector with the mounting accessories to the service personnel. • Read and keep the user's manual of the mounting accessories used. CAUTION ►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause fire
  • Hitachi CP-X3511 | User Manual - Page 9
    your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices the device and the projector. ►Use appropriate accessory or designated cables. Ask your dealer about nonaccessory cables which may be required a specific length or a ferrite
  • Hitachi CP-X3511 | User Manual - Page 10
    with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the
  • Hitachi CP-X3511 | User Manual - Page 11
    chain or wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. Anti-theft chain or wire Security slot Security bar WARNING ►Do not use
  • Hitachi CP-X3511 | User Manual - Page 12
    to replace HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. 3. Replace out the leakage and then replace a battery. If the projector's remote sensor. This projector signals to the projector (Class 1 LED signal to the projector. • The
  • Hitachi CP-X3511 | User Manual - Page 13
    that the REMOTE FREQ. in the SERVICE item of the OPTION menu (46) of the projector to be controlled should be set to a PC. Be sure to check your PC's manuals before connecting this product to the PC. (3) (5) when the projector is working properly. This function is not available while the lamp is
  • Hitachi CP-X3511 | User Manual - Page 14
    . The message "Power off?" will appear on the screen for about 5 seconds. 2. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then POWER indicator will stop blinking and light in steady orange when the
  • Hitachi CP-X3511 | User Manual - Page 15
    SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME ON UP 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 AUDIO menu (36). POSITION MENU ● Even if the projector is in the standby state, the volume can be adjustedENTER when both of following conditions are satisfied. ESC RESET - NORMAL is selected
  • Hitachi CP-X3511 | User Manual - Page 16
    the current port as below. COMPONENT (Y, Cb/Pb, Cr/Pr)  S-VIDEO  VIDEO ● While ON is selected for AUTO SEARCH item in OPTION menu, the projector will keep checking every port sequentially till an input signal is detected (42). If VIDEO button is pressed when COMPUTER IN1 or COMPUTER IN2 port
  • Hitachi CP-X3511 | User Manual - Page 17
    OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 POSITION MENU ENTER ● While ON is selected for AUTO SEARCH item in OPTION menu (ESC 42), theRESET projector will keep checking the ports in above order repeatedly till an input signal is detected. Selecting an aspect ratio 1. Press ASPECT button on the
  • Hitachi CP-X3511 | User Manual - Page 18
    the elevator feet. 4. After making sure that the elevator feet are locked, put the projector down gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet. 1 5 To loose an elevator foot, push the elevator button
  • Hitachi CP-X3511 | User Manual - Page 19
    PC model. ● T he items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (45).MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK Adjusting the position 1. Press POSITION button on the
  • Hitachi CP-X3511 | User Manual - Page 20
    following. (1) AUTO executes automatic vertical keystone correction. (2) MANUAL displays a dialog for keystone correction. Use the ◄/► buttons the OFF RESET button of MAGNIFY on the remote control. ● The projector automatically exits from the MAGNIFY mode when the input signal is changed or when
  • Hitachi CP-X3511 | User Manual - Page 21
    the FREEZE mode when some control ESC RESET buttons are pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. ● Images might appear degraded when this function
  • Hitachi CP-X3511 | User Manual - Page 22
    While MAGNIFY FREEZE PAGE VOLUME ON UP 㧗 the projector is displaying any menu, the MENU button on the projector works DOWN as the cursor buttons. The basic operations item will appear. (3) Use the buttons as instructed in the OSD to operate the item. (continued on next page) 22
  • Hitachi CP-X3511 | User Manual - Page 23
    Using the menu function (continued) Operating 3. To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ● If you want to move the menu position,
  • Hitachi CP-X3511 | User Manual - Page 24
    EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE
  • Hitachi CP-X3511 | User Manual - Page 25
    EASY MENU Item Description ECO MODE Using the ◄/► buttons turns off/on the eco mode. See the ECO MODE item in SETUP menu (34). MIRROR Using the ◄/► buttons switches the mode for mirror status. See the MIRROR item in SETUP menu (35). RESET Performing this item resets all of the EASY MENU
  • Hitachi CP-X3511 | User Manual - Page 26
    PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item BRIGHTNESS CONTRAST Description
  • Hitachi CP-X3511 | User Manual - Page 27
    PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. 1 HIGH  1 CUSTOM  2 MID  2 CUSTOM 6 CUSTOM 3 LOW 6 Hi-BRIGHT-3 3 CUSTOM COLOR TEMP COLOR TINT SHARPNESS 5 CUSTOM  5 Hi-BRIGHT-2  4 CUSTOM  4 Hi-BRIGHT-1 To adjust CUSTOM Selecting a mode whose
  • Hitachi CP-X3511 | User Manual - Page 28
    PRESENTATION ó THEATER ó OFF ACTIVE IRIS (for CP-X2510Z, CP-X3010Z, CP-X2511, CP-X3011, CP-X3511) MY MEMORY PRESENTATION : The active iris If this occurs select OFF. • This function does not apply to the CP-X2011. This projector has 4 memories for adjustment data (for all the items of the
  • Hitachi CP-X3511 | User Manual - Page 29
    IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. IMAGE menu Item Description Using the ▲/▼ buttons
  • Hitachi CP-X3511 | User Manual - Page 30
    the PC model. • The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (45). 30
  • Hitachi CP-X3511 | User Manual - Page 31
    / Pb, Cr/Pr) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer. (continued on next page) 31
  • Hitachi CP-X3511 | User Manual - Page 32
    INPUT menu Item VIDEO FORMAT COMPUTER IN FRAME LOCK Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. S-VIDEO ó VIDEO (2) Using the ◄/► buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó
  • Hitachi CP-X3511 | User Manual - Page 33
    COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ and vertical (VERT) resolutions using CUSTOM ↓ the buttons. This function may not support all resolutions. (5) Move the cursor to OK on screen and press the
  • Hitachi CP-X3511 | User Manual - Page 34
    some input, this function may not work well. • When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. • When the zoom adjustment is set to the TELE (telephoto focus), this function
  • Hitachi CP-X3511 | User Manual - Page 35
    standby state, the power consumption is lowered with some functional restrictions as below. - The RS-232C communication control is disabled except turning the projector on and changing the STANDBY MODE setting. - The STANDBY of the MONITOR OUT (below) is invalid, and no signal is output from the
  • Hitachi CP-X3511 | User Manual - Page 36
    AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. Item VOLUME SPEAKER Description Using
  • Hitachi CP-X3511 | User Manual - Page 37
    SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. SCREEN menu Item LANGUAGE MENU POSITION BLANK
  • Hitachi CP-X3511 | User Manual - Page 38
    SCREEN menu Item MyScreen Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. 1. S electing this item displays a dialog titled "
  • Hitachi CP-X3511 | User Manual - Page 39
    SCREEN menu Item MyScreen Lock MESSAGE Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON ó OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the
  • Hitachi CP-X3511 | User Manual - Page 40
    SCREEN menu Item SOURCE NAME TEMPLATE Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE
  • Hitachi CP-X3511 | User Manual - Page 41
    required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not work properly, depending is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C.
  • Hitachi CP-X3511 | User Manual - Page 42
    does not work as long as the power has been supplied to the projector while the lamp is off. • After turning the lamp on by the DIRECT ON function, if neither input nor operation is detected for about 30 minutes, the projector is turned off, even though the AUTO OFF function (43) is disabled
  • Hitachi CP-X3511 | User Manual - Page 43
    ► button of the projector displays a dialog. To reset the lamp time, select the OK using the ► button. CANCEL  OK • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. • For the lamp replacement, see the section "Replacing the lamp" (53, 54
  • Hitachi CP-X3511 | User Manual - Page 44
    a data will overwrite the current adjusted condition. • ACTIVE IRIS: Changes the active iris mode. (This function does not apply to the CP-X2011.) • PICTURE MODE: Changes the PICTURE MODE (24). • F ILTER RESET: Displays the filter time reset confirmation dialogue (43). • TEMPLATE: Makes the
  • Hitachi CP-X3511 | User Manual - Page 45
    , such as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly. In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually. GHOST 1. Select a color element of ghost using the
  • Hitachi CP-X3511 | User Manual - Page 46
    menu Item SERVICE (continued) Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When ON is selected, the buttons on the projector except the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, FILTER MESSAGE and SECURITY settings are not reset. CANCEL 
  • Hitachi CP-X3511 | User Manual - Page 47
    the RESET button on the remote control for about 3 seconds or press and hold the INPUT button for 3 seconds while pressing the ► button on the projector. (2). The 10 digit Inquiring Code will be displayed. Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your
  • Hitachi CP-X3511 | User Manual - Page 48
    30 seconds, please make note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to MyScreen PASSWORD on/off menu. When a password is set for MyScreen: • The MyScreen registration function (and menu) will be unavailable
  • Hitachi CP-X3511 | User Manual - Page 49
    the Enter PIN code box is displayed. This function will activate only when the projector is started after AC power is turned off. • Please do not forget your the INPUT button for 3 seconds while pressing the ► button on the projector. The 10 digit Inquiring Code will be displayed. • If there is no
  • Hitachi CP-X3511 | User Manual - Page 50
    TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal. • To display the signal again, set this function OFF. • After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp will turn off. • Keystone adjustment feature has been prohibited
  • Hitachi CP-X3511 | User Manual - Page 51
    about 30 seconds, then please make note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to the MY TEXT PASSWORD on/off menu. 2 Turning off the MY TEXT PASSWORD 2-1 Follow the procedure in 1-1 to display the MY TEXT
  • Hitachi CP-X3511 | User Manual - Page 52
    When it is set ON, the MY TEXT will be displayed on the START UP screen and the INPUT_ INFORMATION when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT PASSWORD function is set to the OFF. MY TEXT WRITING (1) Use the ▲/▼ buttons
  • Hitachi CP-X3511 | User Manual - Page 53
    Replacing the lamp lamp cover 3 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. In case of replacement
  • Hitachi CP-X3511 | User Manual - Page 54
    the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury. • Use only the lamp of the specified type. Use of a lamp that does not meet the lamp specifications
  • Hitachi CP-X3511 | User Manual - Page 55
    will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the projector to sufficiently cool down. Filter cover 2 2. Use a vacuum cleaner on and around the filter cover. 3. While supporting the projector with one hand, use your
  • Hitachi CP-X3511 | User Manual - Page 56
    the like, internal temperatures rise and could cause a fire, a burn or malfunction to the projector. NOTE • Please replace the air filter when it is damaged or too soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with
  • Hitachi CP-X3511 | User Manual - Page 57
    . CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard
  • Hitachi CP-X3511 | User Manual - Page 58
    the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair. If this does not resolve the
  • Hitachi CP-X3511 | User Manual - Page 59
    displayed after the remedy, please change the lamp referring to the section "Replacing the lamp". Blinking In Red or Lighting In Red Blinking In Red Turned off The lamp cover has not been properly fixed. Please turn the power off, and allow the projector to cool down at least 45 minutes. After
  • Hitachi CP-X3511 | User Manual - Page 60
    Troubleshooting Regarding the indicator lamps (continued) POWER LAMP , please set FAN SPEED of SERVICE item in OPTION menu to HIGH to the section "Cleaning and replacing the air filter". After cleaning or purposes, the projector is automatically shut down, and the indicator lamps may also be
  • Hitachi CP-X3511 | User Manual - Page 61
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the the power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either of these has not been properly
  • Hitachi CP-X3511 | User Manual - Page 62
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued displayed. Adjust the BRIGHTNESS to a higher level using the menu function. 26 The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play 10
  • Hitachi CP-X3511 | User Manual - Page 63
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued the NORMAL for the ECO MODE item in the SETUP 34 menu. The lamp is approaching the end of its product lifetime. Replace the lamp. 53, 54 Pictures appear blurry. Either the focus and/or horizontal phase
  • Hitachi CP-X3511 | User Manual - Page 64
    Lamp Speaker Power supply Power consumption Temperature range Size Weight (mass) Ports Optional parts Specification Liquid crystal projector 786,432 pixels (1024 horizontal x 768 vertical) 190 W UHP 210 W UHP 8 W x2 (monaural)
  • Hitachi CP-X3511 | User Manual - Page 65
    Specifications (continued) Specifications 98 113 288 317 [unit: mm] 65
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
1
Projector
CP-X2510Z/CP-X3010Z
CP-X2011/CP-X2511/CP-X3011/CP-X3511
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “
Safety Guide
” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
• Mac
®
is a registered trademark of Apple Inc.
• Windows
®
is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
All other trademarks are the properties of their respective owners.
NOTICE
This entry notices of fear of causing trouble.