Hitachi CP-X4020 User Manual

Hitachi CP-X4020 Manual

Get Hitachi CP-X4020 PDF manuals and user guides View all Hitachi CP-X4020 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-X4020 manual content summary:

  • Hitachi CP-X4020 | User Manual - Page 1
    Projector CP-X4020 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this
  • Hitachi CP-X4020 | User Manual - Page 2
    21 Other care 56 Temporarily blanking the screen . . 21 Troubleshooting 57 Using the menu function 22 Related messages 58 EASY MENU 24 Regarding the indicator lamps . . . . 59 ASPECT, AUTO KEYSTONE (EXECUTE), Shutting the projector down 61 KEYSTONE, PICTURE MODE, ECO MODE, Resetting all
  • Hitachi CP-X4020 | User Manual - Page 3
    without external speakers. Preparations Checking the contents of package Your projector should come with the items shown below. Check that all the (2) Power cord (3) Computer cable (4) Lens cover (2) (6) (5) User's manuals (Book x1, CD x1) (3) (6) Security label NOTE • Keep the original
  • Hitachi CP-X4020 | User Manual - Page 4
    after use, since it is too hot. ►Do not look into the lens or vents while the lamp is on, since the strong light is not good for your eyes. ►Do not handle the elevator buttons without holding the projector, since the projector may drop down. CAUTION ►Maintain normal ventilation to prevent the
  • Hitachi CP-X4020 | User Manual - Page 5
    ( 59) (6) LAMP indicator ( 59) (7) SECURITY indicator ( 59) STANDBY/ON (1) INPUT (2) Part names (6) (7) MENU SECURITY LAMP TEMP POWER (3) (12) (7) (13) CAUTION ►Use the shutdown switch only when the projector is not turned off by normal procedure, since pushing this switch stops operation
  • Hitachi CP-X4020 | User Manual - Page 6
    ENTER RESET (10) (4) (3) (7) (12) (14) (11) (13) (15) (18) (21) (23) (25) (26) Back of the remote control NOTE • Any button marked with "*" is not supported on this projector ( 58). 6
  • Hitachi CP-X4020 | User Manual - Page 7
    objects such as walls. • For the case of installation in a special state such as ceiling mount, the specified mounting accessories ( 64) and service may be required. Before installing the projector, consult your dealer about your installation. a Screen size (diagonal) type (inch) m 30 0.8 40 1.0 50
  • Hitachi CP-X4020 | User Manual - Page 8
    fied, and leave installing and removing the projector with the mounting accessories to the service personnel. • Read and keep the user's manual of the mounting accessories used. CAUTION ►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause fire
  • Hitachi CP-X4020 | User Manual - Page 9
    your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices the projector. NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. NOTE • The COMPUTER IN1/2 port can support a
  • Hitachi CP-X4020 | User Manual - Page 10
    with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the
  • Hitachi CP-X4020 | User Manual - Page 11
    chain or wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. Anti-theft chain or wire Security slot Security bar WARNING ►Do not use
  • Hitachi CP-X4020 | User Manual - Page 12
    2. Align and insert the two AA batteries (HITACHI MAXELL, Part No. LR6 or R6P) according with the projector's remote sensor. This projector has a infrared light to send signals to the projector (Class 1 LED), so be sure the remote control's signal to the projector. • The remote control may not
  • Hitachi CP-X4020 | User Manual - Page 13
    the RESET buttons (2) Set to Mode 2:HIGH... the MAGNIFY OFF and the ESC buttons ESC ENTER RESET Please remember that the REMOTE FREQ. in the SERVICE item of the OPTION menu ( 46) of the projector to be controlled should be set to the same mode as the remote control. 13
  • Hitachi CP-X4020 | User Manual - Page 14
    . The message "Power off?" will appear on the screen for about 5 seconds. 2. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indicator will stop blinking and light in steady orange when
  • Hitachi CP-X4020 | User Manual - Page 15
    SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP ON 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 item of the AUDIO menu ( 36). POSITION MENU ● When the projector is in the standby state, the volume can be adjusted if is not selected for the AUDIO OUT STANDBY and the NORMAL is selected to
  • Hitachi CP-X4020 | User Manual - Page 16
    from the current port as below. COMPONENT (Y, Cb/Pb, Cr/Pr) Æ S-VIDEO Æ VIDEO ● While ON is selected for AUTO SEARCH item in OPTION menu, the projector will keep checking every port sequentially till an input signal is detected ( 42). If the VIDEO button is pressed when the COMPUTER IN1 or the
  • Hitachi CP-X4020 | User Manual - Page 17
    DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 POSITION MENU ● While the ON is selected for the AUTO SEARCH item in the OPTION menu ( 42), the projector will keep checking the ports in above order repeatedly till an input signal is detected. Selecting an aspect ratio 1. Press the ASPECT button on
  • Hitachi CP-X4020 | User Manual - Page 18
    the elevator feet. 4. After making sure that the elevator feet are locked, put the projector down gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet. 1 5 To loose an elevator foot, push the elevator button
  • Hitachi CP-X4020 | User Manual - Page 19
    the PC model. ● The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu ( 45). Adjusting the position 1. Press the POSITION button on the remote control when no menu is indicated. The "POSITION" indication
  • Hitachi CP-X4020 | User Manual - Page 20
    BLANK 2. Use the ▲/▼ cursor buttons to select the AUTO or the MANUAL operation, and press the ► cursor (or the ENTER) button to H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, automatic vertical keystone correction may not work
  • Hitachi CP-X4020 | User Manual - Page 21
    If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in blank screen while the projector's lamp is on, take one of items below. • Use the lens cover as it is, which is supplied with the projector • Use the BLANK
  • Hitachi CP-X4020 | User Manual - Page 22
    button on the projector works as the cursor buttons. The basic operations of these menus are as follows. INPUT button STANDBY/ON INPUT MENU SECURITY LAMP TEMP POWER MENU the selected item will appear. (3) Use the buttons as instructed in the OSD to operate the item. (continued on next page) 22
  • Hitachi CP-X4020 | User Manual - Page 23
    Using the menu function (continued) Operating 3. To close the MENU, press the MENU button again or select the EXIT and press the ◄ cursor (or the ENTER) button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ● If you want to move the menu position,
  • Hitachi CP-X4020 | User Manual - Page 24
    EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄/► cursor buttons switches the mode for aspect ratio. See the ASPECT item in
  • Hitachi CP-X4020 | User Manual - Page 25
    EASY MENU Item Description ECO MODE Using the ◄/► cursor buttons turns off/on the eco mode. See the ECO MODE item in the SETUP menu ( 34). MIRROR Using the ◄/► cursor buttons switches the mode for mirror status. See the MIRROR item in the SETUP menu ( 35). RESET Performing this item resets
  • Hitachi CP-X4020 | User Manual - Page 26
    PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table. Item BRIGHTNESS CONTRAST Description
  • Hitachi CP-X4020 | User Manual - Page 27
    PICTURE menu Item Description Using the ▲/▼ cursor buttons switches the color temperature mode. 1 HIGH Ù 1 CUSTOM Ù 2 MID Ù 2 CUSTOM 6 CUSTOM 3 LOW 6 Hi-BRIGHT-3 3 CUSTOM COLOR TEMP COLOR TINT SHARPNESS 5 CUSTOM Ù 5 Hi-BRIGHT-2 Ù 4 CUSTOM Ù 4 Hi-BRIGHT-1 To adjust CUSTOM Selecting a mode
  • Hitachi CP-X4020 | User Manual - Page 28
    iris is always open. • The screen may flicker when the PRESENTATION or the THEATER modes are selected. If this occurs select OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ cursor buttons and pressing the ► cursor
  • Hitachi CP-X4020 | User Manual - Page 29
    IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table. IMAGE menu Item Description Using the ▲/▼ cursor
  • Hitachi CP-X4020 | User Manual - Page 30
    PC model. • The items adjusted by this function may vary when the FINE or the DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu ( 45). 30
  • Hitachi CP-X4020 | User Manual - Page 31
    , Cr/Pr) and the VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer. (continued on next page) 31
  • Hitachi CP-X4020 | User Manual - Page 32
    the signal connector so that no signal is received and select the SYNC ON G OFF, and then reconnect the signal. • The COMPUTER IN1/2 port can support a component signal also ( 9). FRAME LOCK Set the frame lock function on/off for each port. (1) Use the ▲/▼ cursor buttons to select the input ports
  • Hitachi CP-X4020 | User Manual - Page 33
    IN1 and the COMPUTER IN2 input signals can be set on this projector. In the RESOLUTION menu select the resolution you wish to display using (VERT) resolutions using CUSTOM ↓ the cursor buttons. This function is may not support all resolutions. (2) Move the cursor to the OK on screen and press
  • Hitachi CP-X4020 | User Manual - Page 34
    input, this function may not work well. • When the V:INVERT or the H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. • When the zoom adjustment is set to the TELE (telephoto focus), this function
  • Hitachi CP-X4020 | User Manual - Page 35
    MONITOR OUT If the Transition Detector is on and the MIRROR status is changed, the TRANSITION DETECTOR ON alarm ( 50) will be displayed when projector is restarted after the AC power is turned off. Using ▲/▼ cursor buttons switches the standby mode setting between the NORMAL and the SAVING. NORMAL
  • Hitachi CP-X4020 | User Manual - Page 36
    AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table. Item VOLUME SPEAKER AUDIO SOURCE Description
  • Hitachi CP-X4020 | User Manual - Page 37
    SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table. SCREEN menu Item LANGUAGE MENU POSITION BLANK
  • Hitachi CP-X4020 | User Manual - Page 38
    SCREEN menu Item MyScreen Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and the START UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled
  • Hitachi CP-X4020 | User Manual - Page 39
    SCREEN menu Item MyScreen Lock MESSAGE Description Using the ▲/▼ cursor buttons turns on/off the MyScreen lock function. ON Ù OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected
  • Hitachi CP-X4020 | User Manual - Page 40
    SCREEN menu Item Description SOURCE NAME TEMPLATE Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ cursor buttons on the SCREEN menu to select the SOURCE NAME and press the ► cursor (or the
  • Hitachi CP-X4020 | User Manual - Page 41
    required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not work properly, depending is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C.
  • Hitachi CP-X4020 | User Manual - Page 42
    from the ceiling this feature will not function properly so select the OFF. • This function will be unavailable when the Transition Detector is on ( 50). Using the ▲/▼ cursor buttons turns on/off the DIRECT ON function. ON Ù OFF When set to the ON, the lamp in projector will be automatically
  • Hitachi CP-X4020 | User Manual - Page 43
    set to 1 to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of the commands (except get commands) is transmitted to the CONTROL
  • Hitachi CP-X4020 | User Manual - Page 44
    OPTION menu Item MY BUTTON MY SOURCE Description This item is to assign one of the following functions to the MY BUTTON 1/2 on the remote control ( 6). (1) Use the ▲/▼ cursor buttons on the MY BUTTON menu to select a MY BUTTON - (1/2) and press the ► cursor (or the ENTER) button to display the MY
  • Hitachi CP-X4020 | User Manual - Page 45
    adjustment feature is disabled. FINE Ù FAST Ù DISABLE SERVICE FINE: Finer tuning including the H.SIZE adjustment. FAST: projector, etc., the automatic adjustment may not work correctly. In such a case, please choose the DISABLE to disable the automatic adjustment, and make adjustment manually
  • Hitachi CP-X4020 | User Manual - Page 46
    Item SERVICE (continued) Description KEY LOCK Using the ▲/▼ cursor buttons turns on/off the key lock feature. When the ON is selected, the buttons on the projector except initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, FILTER MESSAGE and SECURITY settings are not reset. CANCEL Ö
  • Hitachi CP-X4020 | User Manual - Page 47
    • If an incorrect password is input, the ENTER PASSWORD box will be displayed again. If incorrect password is input 3 times, the projector will turn off. Afterwards the projector will turn off every time an incorrect password is input. 3. Items shown in the table below can be performed. If you have
  • Hitachi CP-X4020 | User Manual - Page 48
    SECURITY menu Item Description MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ cursor buttons on the SECURITY
  • Hitachi CP-X4020 | User Manual - Page 49
    Enter PIN code box is displayed. This function will activate only when the projector is started after AC power is turned off. • Please do not forget input for about 5 minutes while the Inquiring Code is displayed, the projector will turn off. 3-2 Contact your dealer with the 10 digit Inquiring
  • Hitachi CP-X4020 | User Manual - Page 50
    recorded, the TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal. • To display the signal • After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp will turn off. • Keystone adjustment feature has been prohibited as long as
  • Hitachi CP-X4020 | User Manual - Page 51
    SECURITY menu Item MY TEXT PASSWORD Description The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT; • The MY TEXT DISPLAY menu will be unavailable, which can prohibit changing the DISPLAY setting. • The MY TEXT WRITING menu will
  • Hitachi CP-X4020 | User Manual - Page 52
    it is set to the ON, the MY TEXT will be displayed on the START UP screen and the INPUT_INFORMATION when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT PASSWORD function is set to the OFF. (1) Use the ▲/▼ cursor buttons on the
  • Hitachi CP-X4020 | User Manual - Page 53
    dealer and tell the lamp type number. Type number : DT01051 lamp cover Replacing the lamp 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also
  • Hitachi CP-X4020 | User Manual - Page 54
    • Never unscrew except the appointed (marked by an arrow) screws. • Do not open the lamp cover while the projector is suspended from a ceiling. This is dangerous, since if the lamp's bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous
  • Hitachi CP-X4020 | User Manual - Page 55
    replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the projector to sufficiently cool down. 2. 2. Use a vacuum cleaner on and around the filter cover. 3. Filter cover
  • Hitachi CP-X4020 | User Manual - Page 56
    . CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard
  • Hitachi CP-X4020 | User Manual - Page 57
    Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. WARNING ►Never use the projector if has stopped, contact to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks and measures are recommended
  • Hitachi CP-X4020 | User Manual - Page 58
    Troubleshooting specs for your projector or the signal source specs. An improper signal is input. Please confirm the specs for your projector or the signal source specs please set FAN SPEED of the SERVICE item in the OPTION menu the air filter" section of this manual. After you have cleaned or changed
  • Hitachi CP-X4020 | User Manual - Page 59
    Troubleshooting Regarding the indicator lamps When operation of the POWER, TEMP, LAMP and SECURITY indicators differs from usual, check and cope with it according to the following table. POWER TEMP LAMP SECURITY Description Lighting In Orange Turned off Turned off Turned The projector is in
  • Hitachi CP-X4020 | User Manual - Page 60
    Troubleshooting Regarding the indicator lamps (continued) POWER TEMP LAMP SECURITY Description Blinking In Red or Lighting Blinking In Red In Red Turned off Turned off The cooling fan is not operating. Please turn the power off, and allow the projector FAN SPEED of SERVICE item in OPTION
  • Hitachi CP-X4020 | User Manual - Page 61
    of SERVICE item in OPTION menu ( 46) can reset all settings(except LANGUAGE, FILTER TIME, LAMP projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp the signal source device by referring to the manual of the source device. The input changeover
  • Hitachi CP-X4020 | User Manual - Page 62
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued are displayed. Adjust BRIGHTNESS to a higher level using the menu function. 26 The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play 10
  • Hitachi CP-X4020 | User Manual - Page 63
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued the NORMAL for the ECO MODE item in the SETUP 34 menu. The lamp is approaching the end of its product lifetime. Replace the lamp. 53, 54 Pictures appear blurry. Either the focus and/or horizontal phase
  • Hitachi CP-X4020 | User Manual - Page 64
    CONTROL D-sub 9 pin x1 REMOTE CONTROL Stereo mini x1 Lamp: DT01051 Filter set: MU06641 Mounting accessary: HAS-3010 (Bracket for ceiling mount) HAS-204L (Fixing adaptor for low ceilings) HAS-304H (Fixing adaptor for high ceilings) Laser and wired remote control: RC-R008 * For more information
  • Hitachi CP-X4020 | User Manual - Page 65
    Specifications (continued) Specificationsv [unit: mm] 65
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
1
Projector
CP-X4020
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►
Before using this product, please read all manuals for this
product. Be sure to read “
Safety Guide
”
fi
rst. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
±
•
Mac
®
is a registered trademark of Apple Inc.
•
Windows
®
is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
•
VESA and DDC are trademarks of the Video Electronics Standard Association.
All other trademarks are the properties of their respective owners.
NOTICE
This entry notices of fear of causing trouble.