Hitachi CP-X4021N Network Guide

Hitachi CP-X4021N Manual

Get Hitachi CP-X4021N PDF manuals and user guides View all Hitachi CP-X4021N manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-X4021N manual content summary:

  • Hitachi CP-X4021N | Network Guide - Page 1
    Projector CP-X4021N/CP-X5021N/ CP-WX4021N User's Manual (detailed) Network Guide Thank you for purchasing this product. This manual is intended to explain only the network function. For proper use of this product, please refer to this manual and the other manuals for this product. WARNING ►Before
  • Hitachi CP-X4021N | Network Guide - Page 2
    Connection 12 1.5 Selecting the network connection method 14 1.5.1 Passcode connection ...15 1.6 Manual Configuration 23 1.6.1 Profile connection ...23 1.6.2 History connection ...24 1.7 the Network Presentation 43 2.2.1 Display mode ...43 2.2.2 Presenter mode ...44 2.2.3 Display User Name ...44 2
  • Hitachi CP-X4021N | Network Guide - Page 3
    Settings 58 3.9 Security Settings 60 3.10 Projector Control 61 3.11 Remote Control 67 3.12 Projector Status 68 3.13 Network Restart 69 Projector Management using SNMP 80 7.3 Event Scheduling 81 7.4 Command Control via the Network 84 8. Troubleshooting 89 9. Warranty and after-sales service
  • Hitachi CP-X4021N | Network Guide - Page 4
    CPU: Pentium 4 (2.8 GHz or higher) Graphic card: 16 bit, XGA or higher * When using the "LiveViewer" it is recommended that the to the projector after setting the STANDBY MODE to NORMAL. ( SETUP menu in the User's Manual - Operating Guide) • You Service Pack 1 or later. Please install the latest
  • Hitachi CP-X4021N | Network Guide - Page 5
    NOTE • Referring to the manual of your computer or Windows, select the following or a smaller display resolution for the computer. CP-X4021N, CP-X5021N: 1024 x 768 (XGA) CP-WX4021N: 1280 x 800 When a resolution larger than the specified resolution is selected, the projector will convert and display
  • Hitachi CP-X4021N | Network Guide - Page 6
    to the projector through a network. You need to log in as an administrator user to install the software. 1) Turn on the computer. 2) Shut down your CD-ROM drive is not drive E on your computer, you will need to replace E with the correct drive letter assigned to your CD-ROM drive. If the software
  • Hitachi CP-X4021N | Network Guide - Page 7
    folder name. If "Projector Tools" is okay, driver Hitachi Web site. http://www.hitachi-america.us/digitalmedia or http://www.hitachidigitalmedia.com Some functions explained in this manual require the "LiveViewer" Version 4.xx. (In the version information a number between 00 and 99 will replace
  • Hitachi CP-X4021N | Network Guide - Page 8
    to connect the network Before connecting your computer and projector via a network, make sure that the LAN port is selected as the input source on the projector. ( Operating in the User's Manual - Operating Guide) Otherwise a connection cannot be established. 1.3.1 Process overview An overview
  • Hitachi CP-X4021N | Network Guide - Page 9
    the "LiveViewer" in your computer, taking one of the followings. 1) Double click the "LiveViewer" icon on the Desktop in your computer 2) Select "Start" → "All Programs" → "Projector Tools" → "LiveViewer" on Windows menu. Then, proceed to item 1.4 Selecting the network connection mode. ( 10) 9
  • Hitachi CP-X4021N | Network Guide - Page 10
    network and connect the access point and the projector via wired network, since the projector doesn't have wireless LAN function. 1.4.1 Selecting LAN is selected, the wired LAN adapters in your computer are shown. [Troubleshooting] Are you sure that you want to turn on the network adapter? The
  • Hitachi CP-X4021N | Network Guide - Page 11
    it disabled (Off), click the [Yes]. • Not to turn it disabled (Off), click the [No], but the projector may not be able to communicate with your computer through the network. • If you put a check mark in the into you computer, make the firewall function invalid with following the user's manual. 11
  • Hitachi CP-X4021N | Network Guide - Page 12
    DHCP off in the projector. • If no profile data is assigned to the My Connection, it can't be used. [Troubleshooting] A network connection could not be established. Windows prevented network configuration changes. You may log in the Windows under User
  • Hitachi CP-X4021N | Network Guide - Page 13
    1. Connection to the network 1.4 Selecting the network connection mode (continued) Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click the [Yes]. Proceed to item
  • Hitachi CP-X4021N | Network Guide - Page 14
    Proceed to item 1.5.1 Passcode connection. ( 15) Configure Manually Select the [Configure Manually] and click the [Next]. Then, proceed to item 1.6 Manual Configuration. ( 23) Select From List Before selecting this item, your computer and the projectors need to be connected to the same network. If the
  • Hitachi CP-X4021N | Network Guide - Page 15
    the condition below. If such is the case, establish the connection manually. 1) Subnet mask is not Class A or B or C. projector Method 1 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the COMPUTER button on the remote control or INPUT button on the projector
  • Hitachi CP-X4021N | Network Guide - Page 16
    network 1.5 Selecting the network connection method (continued) Method 2 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the buttons on the projector to show the menu on screen. 3) Use the ▲/▼ cursor buttons to select
  • Hitachi CP-X4021N | Network Guide - Page 17
    . If the manual setting screen is displayed, please follow item 1.5.1 (3). ( 21) [Troubleshooting] Incorrect PassCode. The incorrect Passcode was input. Click the [Back] to return to the "Please enter the PassCode" screen. Check the PassCode on the projector screen ( 15) and enter the code again
  • Hitachi CP-X4021N | Network Guide - Page 18
    Windows prevented network configuration changes. You may log in the Windows under User authority. Click the [OK], then the "LiveViewer" main menu is need to add a Network configuration on your computer to connect to the projector. This dialog will be displayed when you need to add a Network configuration on
  • Hitachi CP-X4021N | Network Guide - Page 19
    your destination. ( 30) If you click the [Cancel], you will return to the dialog for adding a Network configuration. If the entered IP address and projector's IP address are the same, a warning dialog shown to the right will be displayed. Click the [OK], and then enter a different IP address from the
  • Hitachi CP-X4021N | Network Guide - Page 20
    1. Connection to the network 1.5 Selecting the network connection method (continued) Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click the [Yes]. Proceed to item
  • Hitachi CP-X4021N | Network Guide - Page 21
    After entering the Passcode ( 17), you are required to enter the network configuration manually if you use a Subnet mask other than Class A, B or C. ( 15) If you use the wired LAN, go to ( 22). Wireless LAN The projector is required to be connected to an access point by a LAN cable. 1) The setting
  • Hitachi CP-X4021N | Network Guide - Page 22
    , take the following procedure to find it out. 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the buttons on the projector to show the menu on screen. 3) Use the ▲/▼ cursor buttons to select the Go to Advanced Menu
  • Hitachi CP-X4021N | Network Guide - Page 23
    • History ( 24) • Configure Network Settings Manually ( 25) If you select Configure Network Settings Manually, proceed to item 1.7 Configuring the network settings manually. ( 25) 1.6.1 Profile connection Selecting a profile data connect the network with the projector. It is required to store the profile
  • Hitachi CP-X4021N | Network Guide - Page 24
    to the network 1.6 Manual configuration (continued) 1.6.2 History connection The "LiveViewer" can memory the network settings when connecting to the projector as a history record. After that, selecting a history record can quickly connect the network with the projector. 1) Select the [History
  • Hitachi CP-X4021N | Network Guide - Page 25
    Connection to the network 1.7 Configuring the network settings manually All setting for the network connection between the projector and computer is input manually. Select the [Configure Network Settings Manually]. The information to be input manually is different, depending on how you want to connect
  • Hitachi CP-X4021N | Network Guide - Page 26
    1. Connection to the network 1.7 Configuring the network settings manually (continued) Wireless LAN 1) The setting on the access point. INFRASTRUCTURE 2) Click the [Next]. 3) Enter the following information that is set in the projector. *3 IP address : 192.168.1.10 (example) Subnet mask: 255.255.255.0
  • Hitachi CP-X4021N | Network Guide - Page 27
    manually (continued) Wired LAN 1) Enter the following information for the projector. on the projector, refer to the NOTE. ( 22) [Troubleshooting] A network connection could not be established. Windows prevented network configuration changes. You may log in the Windows under User
  • Hitachi CP-X4021N | Network Guide - Page 28
    network 1.7 Configuring the network settings manually (continued) If you need to add a Network configuration on your computer to connect to the projector. This dialog will be displayed when you need to add a Network configuration on your computer to connect to the projector. Confirm with your network
  • Hitachi CP-X4021N | Network Guide - Page 29
    network 1.7 Configuring the network settings manually (continued) If the entered IP address and projector's IP address are the same, a warning dialog shown to the right will be displayed. Click the [OK], and then enter a different IP address from the projector's one in the dialog for changing Network
  • Hitachi CP-X4021N | Network Guide - Page 30
    as a profile data for My Connection, check in the box for the [Register this setting to My Connection]. [Troubleshooting] This projector is currently in use (Presenting) by another user. The projector you want to send your images to is occupied by another computer in the Presenter mode. Click the [OK
  • Hitachi CP-X4021N | Network Guide - Page 31
    1. Connection to the network 1.8 Confirming the connection to your destination (continued) A Slideshow is currently running on the projector that you are trying to display to. The projector you want to send your images to is in the Slideshow mode in the PC-LESS Presentation. • Click the [Yes], then
  • Hitachi CP-X4021N | Network Guide - Page 32
    1. Connection to the network 1.8 Confirming the connection to your destination (continued) 1.8.2 Connection error When the connection to the projector could not be established, an error message, "Network Connection not established", will come up. Click the [OK] then the "LiveViewer" main menu is
  • Hitachi CP-X4021N | Network Guide - Page 33
    data 1.9.1 Outline of Profile data The network setting to connect the projector and computer can be stored as a profile data. Once the connection is often used. 1.9.2 Making Profile data The profile data is made on the Manual Configuration screen. ( 23) Up to 10 profile data can be stored for each network
  • Hitachi CP-X4021N | Network Guide - Page 34
    1. Connection to the network 1.9 Profile data (continued) 1.9.3 Editing Profile data If necessary, the profile data can be edited on the Manual Configuration screen. ( 23) 1) Select the [Profile], and select one of the data listed in the window. 2) Click the [Edit]. 3) The "Edit profile"
  • Hitachi CP-X4021N | Network Guide - Page 35
    1. Connection to the network 1.9 Profile data (continued) 1.9.4 Registering My Connection One of the profile data, which is often used, can be registered as the My Connection profile data. Once the data is registered, all you need to do is to select the My Connection to connect to the network. ( 12) 1)
  • Hitachi CP-X4021N | Network Guide - Page 36
    ) Also, you can register a profile data to My Connection, when the network connection is established. When it is established, the "Connection to Projector successful" screen is displayed. ( 30) If you wish to use the current connection setting for My Connection, check in the box for the [Register
  • Hitachi CP-X4021N | Network Guide - Page 37
    can configure settings and operate functions to send your images to the projector. 2.1.1 Main menu and Operating buttons 1) Menu Type There are 2 o 2) Operating buttons q Starting Capture button The transmission to the projector is started and the images will be displayed. The Display mode will
  • Hitachi CP-X4021N | Network Guide - Page 38
    last image before the button is clicked is remained on screen. You can revise the image data on your computer without showing it on the projector's screen. r Display mode button ( 40) The button switches the Single PC mode and Multi PC mode. t Connect button The screen to select the connection mode
  • Hitachi CP-X4021N | Network Guide - Page 39
    , but the image transmissions on hold. The network connection is established and the images on the computer are being sent to the projector. The network connection to the projector is disconnected. 2) Status Display in Multi PC mode The icon is displayed at the right end of the Display mode buttons
  • Hitachi CP-X4021N | Network Guide - Page 40
    icon on the main menu is replaced by the icon you selected. NOTE • The image transmission will be stopped, when you click the Single mode button while the projector is in the Single PC mode method. (Refer to NETWORK menu in the User's Manual - Operating Guide for the function on the projector.) 40
  • Hitachi CP-X4021N | Network Guide - Page 41
    configuration ( 19, 28) when you connect your computer to the projector. It is turned off by default. w Optimize Performance The "LiveViewer" captures computer screen in JPEG data and sends the JPEG data to the projector. The "LiveViewer" has two options that have different compression rate of
  • Hitachi CP-X4021N | Network Guide - Page 42
    is up to 20 letters can be input by using alphanumeric characters. The user name can be displayed on the projector screen, so you can find out whose image is currently on the screen. (Refer to NETWORK menu in the User's Manual - Operating Guide) If the check box is not marked, the information is not
  • Hitachi CP-X4021N | Network Guide - Page 43
    to smoothly make your presentations and conduct conferences. To start the Network Presentation, select the LAN port as the input source on the projector and click the Starting Capture button on the "LiveViewer". 2.2.1 Display mode Two display modes, Single PC mode and Multi PC mode, are available
  • Hitachi CP-X4021N | Network Guide - Page 44
    mode can be set on the Option menu in the "LiveViewer" main menu. ( 41) 2.2.3 Display User Name A "User Name" can be input in the "LiveViewer", which is displayed on screen by operating the menu on the projector. So, it can be found out whose image is currently displayed on screen. ( 41) 44
  • Hitachi CP-X4021N | Network Guide - Page 45
    Explorer 6.0 or later is required. • If JavaScript is disabled in your web browser configuration, you must enable JavaScript in order to use the projector web pages properly. See the Help files for your web browser for details on how to enable JavaScript. • It is recommended that all web browser
  • Hitachi CP-X4021N | Network Guide - Page 46
    2) Enter your user name and password, and then click the [OK]. NOTE • The language used on the Web Control screen is the same as that of the OSD on the projector. If you want to change it, you need to change the OSD language on the projector. ( SCREEN menu in the User's Manual - Operating Guide) 46
  • Hitachi CP-X4021N | Network Guide - Page 47
    3. Web Control 3.1 Logon (Continued) Below are the factory default settings for user name and password. User name Administrator Password If you logon successfully, the screen below will be displayed. Main menu 3) Click the desired operation or configuration item on the main menu. 47
  • Hitachi CP-X4021N | Network Guide - Page 48
    Name DHCP IP Address Subnet Mask Default Gateway DNS Server Address MAC Address Description Displays the projector name settings. Displays the DHCP configuration settings. Displays the current IP address. Displays the subnet mask. Displays the default gateway. Displays the DNS server
  • Hitachi CP-X4021N | Network Guide - Page 49
    . Only numbers '0-9' and alphabet 'a-z', 'A-Z' can be used. Configures the DNS server address. Configures the AMX Device Discovery setting to detect the projector from the controllers of AMX connected to the same network. For the details of AMX Device Discovery, visit the AMX web site. URL: http://www
  • Hitachi CP-X4021N | Network Guide - Page 50
    3. Web Control 3.4 Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control Port2 (Port:9715) Port open Authentication PJLink TM Port (Port:4352) Port open Authentication My Image Port (Port:9716) Port open
  • Hitachi CP-X4021N | Network Guide - Page 51
    server is setup in the Network Settings. The maximum length of host or domain name is up to 255 characters. Downloads a MIB file from the projector. Configures the Bridge port number. Input the port number. Except for 9715, 9716, 9719, 9720, 5900, 5500, 4352 between 1024 and 65535 can be
  • Hitachi CP-X4021N | Network Guide - Page 52
    mail settings work correctly using the [Send Test Mail] button. Please enable Send mail setting before clicking the [Send Test Mail]. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. 52
  • Hitachi CP-X4021N | Network Guide - Page 53
    the SAVING:the projector's power status changes from "Standby state" to "ON (lamp is turned on)". ( SETUP menu in the User's Manual - Operating Guide) The SNMP access is detected from the invalid SNMP community. Refer to "Troubleshooting" in the User's Manual - Operating Guide for further detailed
  • Hitachi CP-X4021N | Network Guide - Page 54
    message is displayed on the projector screen. An e-mail will be sent when the usage time of the filter exceeds the time limit that is set. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN OFF. ( OPTION menu in the User's Manual - Operating Guide) • Lamp Time Alarm is defined
  • Hitachi CP-X4021N | Network Guide - Page 55
    3.7 Schedule Settings 3. Web Control Displays and configures schedule settings. Item Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday Specific date No.1 Specific date No.2 Specific date No.3 Specific date No.4 Specific date No.5 Description Configures the daily schedule. Configures the
  • Hitachi CP-X4021N | Network Guide - Page 56
    My Image Messenger Slideshow Description Configures the time to execute commands. Configures the commands to be executed. Configures the parameters for power control. Configures the parameters for input switching. Configures the parameters for My Image data display. ( 70) Configures the parameters for
  • Hitachi CP-X4021N | Network Guide - Page 57
    "schedule execution error" status in case lamp does not light or/and display data are not stored in the projector at the scheduled event execution time. scheduled Slideshow. • Please refer to "Troubleshooting" in the User's Manual - Operating Guide in case scheduled functions/events are not executed appropriately
  • Hitachi CP-X4021N | Network Guide - Page 58
    3. Web Control 3.8 Date/Time Settings Displays and configures the date and time settings. Item Current Date Current Time Daylight Savings Time Start Month Week Day Time End Month Week hour minute Day Time hour minute Description Configures the current date in year/month/day format. Configures
  • Hitachi CP-X4021N | Network Guide - Page 59
    the network connection. You can restart the network connection by clicking the [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. • To enable the SNTP function, the time difference must be set
  • Hitachi CP-X4021N | Network Guide - Page 60
    name Password Re-enter Password Network Control Authentication Password Re-enter Authentication Password SNMP Community name Description Configures the user name and password. Configures the user name. The length of the text can be up to 32 alphanumeric characters. Configures the password. The length
  • Hitachi CP-X4021N | Network Guide - Page 61
    setting value may not match with the actual value if the user changes the value manually. In that case, please refresh the page by clicking the [Refresh] button. Controls the projector. Item Description MAIN POWER Turns the power on/off. INPUT SOURCE Selects the input source. PICTURE MODE
  • Hitachi CP-X4021N | Network Guide - Page 62
    3. Web Control 3.10 Projector Control (Continued) Item Description PICTURE BRIGHTNESS Adjusts the brightness setting. CONTRAST Adjusts the contrast setting. GAMMA Selects the gamma setting. COLOR TEMP Selects the color
  • Hitachi CP-X4021N | Network Guide - Page 63
    3.10 Projector Control (Continued) 3. Web Control Item Description SETUP AUTO KEYSTONE EXECUTE Performs the automatic keystone distortion setting. KEYSTONE V Adjusts the vertical keystone distortion setting. KEYSTONE H Adjusts
  • Hitachi CP-X4021N | Network Guide - Page 64
    3. Web Control 3.10 Projector Control (Continued) Item AUDIO VOLUME SPEAKER AUDIO SOURCE COMPUTER IN1 AUDIO SOURCE COMPUTER IN2 AUDIO SOURCE LAN AUDIO SOURCE USB TYPE A AUDIO SOURCE USB TYPE B
  • Hitachi CP-X4021N | Network Guide - Page 65
    correction function on/off. Turns the direct power on function on/off. Configures the timer to shut off the projector when no signal is detected. Selects the USB TYPE B setting. Assigns the functions for the MY BUTTON-1 button on the included remote control. Assigns the functions for the MY
  • Hitachi CP-X4021N | Network Guide - Page 66
    3. Web Control 3.10 Projector Control (Continued) The items shown in the table below can be performed using the Projector Control menu. Click the [QUIT PRESENTER MODE]. Item SERVICE QUIT PRESENTER MODE Description Quit compulsorily from the Presenter mode. 66
  • Hitachi CP-X4021N | Network Guide - Page 67
    in the projector. The functions on the bundled remote control are assigned to the Web Remote Control screen. Item POWER COMPUTER VIDEO BLANK DOWN button. Starts the Slideshow. NOTE • The Web Remote Control does not support repeat function that performs an action while holding a button clicked
  • Hitachi CP-X4021N | Network Guide - Page 68
    Status Displays and configures the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze Description Displays the current error status Displays the usage time for the current lamp. Displays the usage time for the current filter
  • Hitachi CP-X4021N | Network Guide - Page 69
    's network connection. Item Restart Description Restarts the projector's network connection in order to activate new configuration settings. NOTE • Restarting requires you to re-log on in order to further control or configure the projector via a web browser. Wait 30 seconds or more after clicking
  • Hitachi CP-X4021N | Network Guide - Page 70
    Projector Image Tool" is necessary to use MY IMAGE transmission. It can be downloaded from the Hitachi web site (http://www.hitachi-america.us/ digitalmedia or http://www.hitachidigitalmedia.com). Refer to the manual for the application for instructions in the User's Manual - Operating Guide) • The
  • Hitachi CP-X4021N | Network Guide - Page 71
    a web browser when MY IMAGE function is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK]. 3) Click the [Port Settings] on the
  • Hitachi CP-X4021N | Network Guide - Page 72
    once stored in the projector. Transfer text data 1 instructions of the application. NOTE • It is possible to store the text data up to 12 in the maximum. • Using MY BUTTON that registered MESSENGER can turn the displaying messenger text on/off. ( OPTION menu in the User's Manual - Operating Guide
  • Hitachi CP-X4021N | Network Guide - Page 73
    from a web browser when Messenger function is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK]. 3) Click the [Port Settings] on the
  • Hitachi CP-X4021N | Network Guide - Page 74
    , for RS-232C communication. NOTE • Before connecting the devices, read the manuals for the devices to ensure the connection. For RS-232C connection, check the specifications of each port and use the suitable cable. ( "Connection to the ports" in the User's Manual - Operating Guide (Technical)) 74
  • Hitachi CP-X4021N | Network Guide - Page 75
    , use items in the COMMUNICATION menu. Open the menu of the projector and select the OPTION - SERVICE - COMMUNICATION menu. ( OPTION menu - SERVICE - COMMUNICATION in the User's Manual - Operating Guide) 1) Using the COMMUNICATION TYPE menu, select the NETWORK BRIDGE for the CONTROL port. 2) Using
  • Hitachi CP-X4021N | Network Guide - Page 76
    the NETWORK BRIDGE is selected for the COMMUNICATION TYPE. ( OPTION menu - SERVICE - COMMUNICATION in the User's Manual - Operating Guide) HALF-DUPLEX FULL-DUPLEX 6.4.1 HALF-DUPLEX This method lets the projector make two way communication, but only one direction, either transmitting or receiving
  • Hitachi CP-X4021N | Network Guide - Page 77
    from an external device and the RESPONSE LIMIT TIME is set to OFF, the projector can receive the data from the computer and send it out to an external as the default setting. 6.4.2 FULL-DUPLEX This method lets the projector make two way communication, transmitting and receiving data at the same
  • Hitachi CP-X4021N | Network Guide - Page 78
    loses power. Mail Settings ( 52) To use the projector's e-mail alert function, please configure the following items through a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user
  • Hitachi CP-X4021N | Network Guide - Page 79
    ] button to save the settings. Failure/Warning e-mails are formatted as follows: Subject line : Text : Date Time IP Address MAC Address
  • Hitachi CP-X4021N | Network Guide - Page 80
    • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings ( 50) Configure the following items via of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password
  • Hitachi CP-X4021N | Network Guide - Page 81
    The scheduling function enables to setup scheduled events including power on / power off. It enables to be "self-management" projector. NOTE • You can schedule the following control events: Power, Input Source, My Image, Messenger, Slideshow. ( 56) • The power on / off event has the lowest priority
  • Hitachi CP-X4021N | Network Guide - Page 82
    specified date and time. NOTE • In standby mode, the POWER indicator will flash green for approx. 3 seconds when at least 1 "Power ON" schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet. The schedule function does not work when the
  • Hitachi CP-X4021N | Network Guide - Page 83
    address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password . Replace the battery by following the instructions on replacing the battery. ( Replacing the internal clock battery in the User's Manual (
  • Hitachi CP-X4021N | Network Guide - Page 84
    when command control is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK]. 3) Click the [Port Settings]
  • Hitachi CP-X4021N | Network Guide - Page 85
    7. Other Functions 7.4 Command Control via the Network (Continued) When the authentication setting is enabled, the following settings are required. ( 60) 7) Click the [Security Settings] on the main menu. 8) Click the [Network Control] and enter the desired authentication password. * See NOTE. 9)
  • Hitachi CP-X4021N | Network Guide - Page 86
    commands without any changes. The reply data format is the same as the RS-232C commands. ( "RS-232C Communication" in the User's Manual - Operating Guide (Technical)) However, the following reply will be sent back in the event of authentication failure when authentication is enabled.
  • Hitachi CP-X4021N | Network Guide - Page 87
    Reply 0x15 Connection ID 1 byte Connection ID 1 byte Reply 0x1C Error code 2 bytes Reply Data 0x1D 2 bytes Reply Status code 0x1F 2 bytes Reply 0x1F Authentication Error code 0x04 0x00 Connection ID 1 byte
  • Hitachi CP-X4021N | Network Guide - Page 88
    the Authentication Password is set to "password" and the random 8 bytes are "a572f60c". 1) Select the projector. 2) Receive the random 8 bytes "a572f60c" from the projector. 3) Bind the random 8 bytes "a572f60c" and the Authentication Password "password" and it becomes "a572f60cpassword". 4) Digest
  • Hitachi CP-X4021N | Network Guide - Page 89
    8. Troubleshooting 8. Troubleshooting Problem Likely Cause Things to Check Reference Page Number No image The projector is not turned on. The projector's input source isn't switched to LAN. Is the projector's lamp on? Is the projector switched to LAN? *17 *18, *19 Check the network
  • Hitachi CP-X4021N | Network Guide - Page 90
    8. Troubleshooting 8. Troubleshooting (Continued) Problem Likely Cause Things to Check Reference Page Number The projector isn't capable Switching the priority to with Windows® Aero® mode. The "LiveViewer" does not support these features of Windows Vista® Aero®. - (continued on next page) 90
  • Hitachi CP-X4021N | Network Guide - Page 91
    completed Communication between the projector and computer is not working well. - The projector does not respond - Image on screen is frozen. NETWORK Functions of the projector is not working well. Try "RESTART" in SERVICE menu under the NETWORK menu. *66 * User's Manual - Operating Guide 91
  • Hitachi CP-X4021N | Network Guide - Page 92
    and after-sales service 9. Warranty and after-sales service If a problem occurs with the equipment, please read 8. Troubleshooting ( 89) section first and review all suggested check points. After that, please contact your dealer or service company, if you still have the problem. They will tell
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
1
Projector
CP-X4021N/CP-X5021N/
CP-WX4021N
User's Manual (detailed)
Network Guide
Thank you for purchasing this product.
This manual is intended to explain only the network function. For proper use of this
product, please refer to this manual and the other manuals for this product.
Features
This projector has the network function that brings you the following main features.
►Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
±
Network Presentation
: allows the projector to project computer images transmitted
through a network. (
²
37
)
±
Web Control
: allows you to monitor and control the projector through a network from a
computer. (
²
45
)
±
My Image
: allows the projector to store up to four still images and project them. (
²
70
)
±
Messenger
: allows the projector to display text sent from a computer through a network.
(
²
72
)
±
Network Bridge
: allows you to control an external device through the projector from a
computer. (
²
74
)
•
Microsoft
®
, Internet Explorer
®
, Windows
®
, Windows Vista
®
and Aero
®
are registered
trademarks of Microsoft Corporation in the U.S. and/or other countries.
• Pentium
®
is a registered trademark of Intel Corporation.
• JavaScript
®
is a registered trademark of Sun Microsystems, Inc.
•
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
•
Trademark PJLink is a trademark applied for trademark rights in
Japan, the United States of America and other countries and areas.
All other trademarks are the properties of their respective owners.