Hitachi CP-X4021N Operating Guide

Hitachi CP-X4021N Manual

Get Hitachi CP-X4021N PDF manuals and user guides View all Hitachi CP-X4021N manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-X4021N manual content summary:

  • Hitachi CP-X4021N | Operating Guide - Page 1
    Projector CP-X4021N/CP-X5021N/ CP-WX4021N User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read User's Manual - Safety Guide of the Video Electronics Standard Association
  • Hitachi CP-X4021N | Operating Guide - Page 2
    , MY MEMORY Troubleshooting 95 IMAGE menu 36 Related messages 95 ASPECT, OVER SCAN, V POSITION, H POSITION, Regarding the indicator lamps . . . . 97 H PHASE, H SIZE, AUTO ADJUST EXECUTE Shutting the projector down 98 INPUT menu 39 Resetting all settings 98 PROGRESSIVE, VIDEO NR, COLOR
  • Hitachi CP-X4021N | Operating Guide - Page 3
    support various image equipment which have digital interface to get clearer pictures on a screen. This projector has a 1.7 times optical zoom, horizontal and vertical manual Contents of package section in the User's Manual (concise) which is a book. Your projector should come with the items shown
  • Hitachi CP-X4021N | Operating Guide - Page 4
    Projector (1) Lamp cover ( 89) The lamp unit is inside. (2) Speakers (x2) ( 19, 46) (3) Filter cover ( 91) The air filter and intake vent are inside. (4) Elevator feet (x2) ( 22) (5) Elevator buttons (x2) ( 22) (6) Remote unless the manuals direct it. ►Do not subject the projector to unstable
  • Hitachi CP-X4021N | Operating Guide - Page 5
    ( 19) (9) MENU button ( 29) (10) SECURITY indicator ( 76) (11) LAMP indicator ( 97) (12) TEMP indicator ( 97) (13) POWER indicator ( 97) H, V) (12) REMOTE CONTROL port (13) MONITOR OUT port (14) CONTROL port (15) COMPONENT ports (Y,Cb/Pb, Cr/Pr) (16) VIDEO port (17) S-VIDEO ports (18) Shutdown
  • Hitachi CP-X4021N | Operating Guide - Page 6
    Introduction Part names (continued) Remote control (1) VIDEO button ( 20) (2) COMPUTER button ( 20) (3) SEARCH button ( 21) (4) (6) (5) (16) (8) (9) (19) (17) (20) (22) (24) MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP ON 㧗 DOWN OFF ࡯ KEYSTONE
  • Hitachi CP-X4021N | Operating Guide - Page 7
    accessories ( Specifications in the User's manual (concise)) and service may be required. Before installing the projector, consult your dealer about your  Projection distance (from the projector's end Screen height Projector top Projector bottom T-1: CP-X4021N, CP-X5021N (1024X768) (±10%) 4:3
  • Hitachi CP-X4021N | Operating Guide - Page 8
    Setting up Arrangement (continued) T-2: CP-WX4021N (1280X800) (±10%) 16:10 4:3 Screen type Screen Projection size distance projector. • Do not put the projector on its side, front or rear position. • Do not attach nor place anything on the projector unless otherwise specified in the manual
  • Hitachi CP-X4021N | Operating Guide - Page 9
    and could be deposited in the projector causing image degradation or other problems. • Do not place the projector in a smoking area, kitchen, passageway or by the window. NOTICE • Position the projector to prevent light from directly hitting the projector's remote sensor. • Do not place the product
  • Hitachi CP-X4021N | Operating Guide - Page 10
    following instructions. Refer to the figures in subsequent pages. Before connecting the projector to a network system, be sure to read User's Manual - Network Guide too. . - Please use the standard drivers in your computer as this projector is a Plugand-Play monitor. (continued on next page) 10
  • Hitachi CP-X4021N | Operating Guide - Page 11
    manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector. - Some signal may need an adapter to input this projector. - Some computers have multiple screen display modes that may include some signals which are not supported
  • Hitachi CP-X4021N | Operating Guide - Page 12
    78) ( 55) ( 64) ( 61) CAUTION ► Before connecting the projector to a network system be sure to obtain the consent of the administrator of the excessive voltage. ►Before removing the USB storage device from the port of the projector, be sure to use the REMOVE USB function on the thumbnail screen to
  • Hitachi CP-X4021N | Operating Guide - Page 13
    Content Protection) and therefore capable of displaying a video signal from HDCP compatible DVD players or the like. - The HDMI supports the following video signals: 480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50/60,1080p@50/60 - This projector can be connected with another equipment that has
  • Hitachi CP-X4021N | Operating Guide - Page 14
    Speakers (with an amplifier) Monitor Microphone system Wired remote control (optional) ( 45) ( 46) NOTE • If a loud feedback noise is produced from the speaker, move the microphone away from the speaker. • This projector doesn't support plug-in power for the microphone. Microphone function • You
  • Hitachi CP-X4021N | Operating Guide - Page 15
    . Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. security bar Security slot WARNING ►Do not use the security bar and slot to prevent the projector from falling down, since it is not designed for it. CAUTION ►Do not place anti
  • Hitachi CP-X4021N | Operating Guide - Page 16
    hook part of the battery cover, remove it. 1 2 3 2. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. 3. Replace the battery cover in the direction of the arrow and snap it back into place
  • Hitachi CP-X4021N | Operating Guide - Page 17
    REMOTE FREQ. in the SERVICE item of the OPTION menu ( 60) of the projector to be controlled should be set to the same mode as the remote manuals before connecting this product to the computer. USB TYPE B port MY SOURCE/ VIDEO computer's configurations and mouse drivers. This function can work with
  • Hitachi CP-X4021N | Operating Guide - Page 18
    off the power 1. Press the STANDBY/ON button on the projector or the remote control. The message "Power off?" will appear on the screen for about 5 seconds. 2. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in
  • Hitachi CP-X4021N | Operating Guide - Page 19
    adjustable with the VOLUME +/- buttons on the remote control, in synchronization with the volume of the projector ( 19). The volume of the microphone is received. This function is available only when the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPONENT, COMPUTER IN1 or COMPUTER IN2,
  • Hitachi CP-X4021N | Operating Guide - Page 20
    seconds to project the images from the USB TYPE B port. 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below. HDMI COMPONENT S-VIDEO VIDEO ● While ON is selected for AUTO SEARCH item in OPTION menu, the
  • Hitachi CP-X4021N | Operating Guide - Page 21
    Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. For a computer signal CP-X4021N, CP-X5021N: NORMAL 4:3 16:9 16:10 CP-WX4021N: NORMAL 4:3 16:9 16:10 NATIVE ASPECT button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT
  • Hitachi CP-X4021N | Operating Guide - Page 22
    4. After making sure that the elevator feet are locked, put the projector down gently. To finely 5. If necessary, the elevator feet can be manually adjust, twist the foot. twisted to make more precise adjustments. Hold the projector when twisting the feet. CAUTION ►Do not handle the elevator
  • Hitachi CP-X4021N | Operating Guide - Page 23
    so that the lens does not shift from the adjusted horizontal lens position. Adjusting the vertical lens position may shift the horizontal lens position. This projector is not equipped with a lock for vertical lens position. 23
  • Hitachi CP-X4021N | Operating Guide - Page 24
    ࡯ KEYSTONE MY BUTTON MUTE 1 2 For a video signal and s-video signal The video format best suited for the respective input signal will be the AUTO ADJUST item of the SERVICE item in the OPTION menu ( 59). Adjusting the position 1. Press POSITION button on the remote control when no menu is
  • Hitachi CP-X4021N | Operating Guide - Page 25
    Pressing the KEYSTONE button again finishes the operation and closes the menu or dialog. • When the screen is adjusted by PERFECT FIT, neither AUTO nor MANUAL is selectable. If you wish to use these functions, refer to step 3 in the PERFECT FIT item to initialize the adjustment of PERFECT FIT. • When
  • Hitachi CP-X4021N | Operating Guide - Page 26
    Operating PERFECT FIT 2. When PERFECT FIT is pointed at, pressing the ► or ENTER button displays the KEYSTONE_PERFECT FIT dialog. 3. If it is necessary to initialize the current adjustment, point at RESET in the dialog with the RESET button, and press the ENTER or INPUT button. 4. Select one of the
  • Hitachi CP-X4021N | Operating Guide - Page 27
    on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on as the input source. - A sync signal in the range not supported is input. - There is no input signal. 27
  • Hitachi CP-X4021N | Operating Guide - Page 28
    remote control. The "FREEZE" indication will appear on the screen (however, MY SOURCE/ VIDEO COMPUTER DOC.CAMERA the indication will not appear when the OFF is selected for ASPECT AUTO SEARCH BLANK the MESSAGE item in the SCREEN menu ( 50)), and the projector while the projector's lamp is on,
  • Hitachi CP-X4021N | Operating Guide - Page 29
    these menus is operated using the same methods. While the projector is displaying any menu, the MENU button on the projector works as the cursor buttons. The basic operations of these item will appear. (3) Use the buttons as instructed in the OSD to operate the item. (continued on next page) 29
  • Hitachi CP-X4021N | Operating Guide - Page 30
    ● When you want to reset the operation, press RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, VOLUME) cannot the previous display, press the ◄ cursor button or ESC button on the remote control. Indication in OSD (On Screen Display) The meanings of the
  • Hitachi CP-X4021N | Operating Guide - Page 31
    EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. EASY MENU Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE
  • Hitachi CP-X4021N | Operating Guide - Page 32
    EASY MENU Item Description ECO MODE Using the ◄/► buttons turns off/on the Eco mode. See the ECO MODE item in SETUP menu ( 44). MIRROR Using the ◄/► buttons switches the mode for mirror status. See the MIRROR item in SETUP menu ( 44). RESET Performing this item resets all of the EASY MENU
  • Hitachi CP-X4021N | Operating Guide - Page 33
    PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item BRIGHTNESS CONTRAST Description
  • Hitachi CP-X4021N | Operating Guide - Page 34
    item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals. TINT Using the ◄/► buttons adjusts the tint. Reddish Greenish • This item can be selected only for a video, s-video and component video signal. • For an HDMI signal, this item can also be selected
  • Hitachi CP-X4021N | Operating Guide - Page 35
    : The active iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER
  • Hitachi CP-X4021N | Operating Guide - Page 36
    NORMAL 4:3 16:9 16:10 NATIVE For an HDMI signal CP-X4021N, CP-X5021N: NORMAL 4:3 16:9 16:10 14:9 ASPECT CP-WX4021N: NORMAL 4:3 16:9 16:10 14:9 NATIVE For a video signal, s-video signal or component video signal CP-X4021, CP-X5021: 4:3 16:9 14:9 CP-WX4021: 4:3 16:9 16:10 14:9 NATIVE For an input
  • Hitachi CP-X4021N | Operating Guide - Page 37
    Pressing the RESET button when the V POSITION is selected will reset the V POSITION to the default setting. • When this function is performed on a video signal or an s-video signal, the range of this adjustment depends on OVER SCAN ( 36) setting. It is not possible to adjust when OVER SCAN is set to
  • Hitachi CP-X4021N | Operating Guide - Page 38
    reset the adjustment by pressing the RESET button on the remote control during this operation. • Images might appear degraded when bright picture when adjusting. For a video signal and s-video signal The video format best suited for the respective input SERVICE item in the OPTION menu ( 59). 38
  • Hitachi CP-X4021N | Operating Guide - Page 39
    COMPONENT ports. COMPONENT SCART RGB When the SCART RGB is selected, the COMPONENT (Y, Cb/ Pb, Cr/Pr) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer. (continued on next page) 39
  • Hitachi CP-X4021N | Operating Guide - Page 40
    to select the input port. (2) Using the ◄/► buttons switches the mode for video format. AUTO NTSC PAL SECAM N-PAL M-PAL NTSC4.43 • This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. • The AUTO mode automatically selects the optimum mode. • The AUTO operation
  • Hitachi CP-X4021N | Operating Guide - Page 41
    type. AUTO SYNC ON G OFF • Selecting the AUTO mode allows you to input a sync on G signal or component video signal from the port. Please refer to Technical for the connection of component video input to COMPUTER IN1/2 port. • In the AUTO mode, the picture may be distorted with certain input signals
  • Hitachi CP-X4021N | Operating Guide - Page 42
    COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ vertical (VERT) resolutions using CUSTOM ↓ the buttons. This function may not support all resolutions. (5) Move the cursor to OK on screen and press the
  • Hitachi CP-X4021N | Operating Guide - Page 43
    some input, this function may not work well. • When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. • When the zoom adjustment is set to the TELE (telephoto focus), this function
  • Hitachi CP-X4021N | Operating Guide - Page 44
    at start-up regardless of the ECO MODE ( below) setting. An OSD message "AUTO ECO MODE" will be displayed for tens of seconds when the projector starts with this function activated. ECO MODE Using the ▲/▼ buttons turns off/on the Eco mode. NORMAL ECO • When the ECO is selected, acoustic noise
  • Hitachi CP-X4021N | Operating Guide - Page 45
    with some functional restriction as below: • When SAVING is selected, the RS-232C communication control except to turn the projector on and the network function are disabled while the projector is in the standby mode. If the COMMUNICATION TYPE in the COMMUNICATION menu is set to NETWORK BRIDGE, all
  • Hitachi CP-X4021N | Operating Guide - Page 46
    (2) is output to both the AUDIO OUT port and built-in speaker of this projector. However, the built-in speaker does not work when SPEAKER is set to OFF. received. This function is available only when the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPONENT, COMPUTER IN1 or COMPUTER IN2, and
  • Hitachi CP-X4021N | Operating Guide - Page 47
    AUDIO menu Item HDMI AUDIO MIC LEVEL MIC VOLUME Description Using the ▲/▼ buttons switches the mode for the HDMI audio. Check each of the two modes provided and select the suitable one for your HDMI audio device. 1 2 Using the ▲/▼ buttons switches the input level to match that of the microphone
  • Hitachi CP-X4021N | Operating Guide - Page 48
    button to save the language setting. Using the buttons adjusts the menu position. MENU POSITION To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. BLANK Using the ▲/▼ buttons switches the mode for the blank screen. The blank screen is
  • Hitachi CP-X4021N | Operating Guide - Page 49
    for capturing will appear. To stop performing, press the RESET button on the remote control. 2. Using the buttons adjusts the frame position. Please move the frame to the previous dialog, press the RESET button on the remote control. Registration takes several minutes. When the registration is
  • Hitachi CP-X4021N | Operating Guide - Page 50
    SCREEN menu Item MyScreen Lock MESSAGE Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the
  • Hitachi CP-X4021N | Operating Guide - Page 51
    SCREEN menu Item Description SOURCE NAME Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE
  • Hitachi CP-X4021N | Operating Guide - Page 52
    scroll it horizontally when MAP1 or MAP2 is selected. To invert or scroll the map, display the guidance by pressing the RESET button on the remote three seconds or more when MAP1 or MAP2 appears. (continued on next page) 52
  • Hitachi CP-X4021N | Operating Guide - Page 53
    relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C.
  • Hitachi CP-X4021N | Operating Guide - Page 54
    button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. an input is found, the projector will stop searching and display the image. COMPUTER IN1 COMPUTER IN2 LAN USB TYPE A VIDEO S-VIDEO COMPONENT HDMI USB TYPE B
  • Hitachi CP-X4021N | Operating Guide - Page 55
    99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of the commands (except get commands) is transmitted to the CONTROL port during the
  • Hitachi CP-X4021N | Operating Guide - Page 56
    remote control or the ► button of the projector displays a dialog. To reset the lamp time, select the OK using the ► button. CANCEL OK • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. • For the lamp replacement, see the section Replacing
  • Hitachi CP-X4021N | Operating Guide - Page 57
    BUTTON 1/2 on the remote control ( 6). (1) VIDEO port. • SLIDESHOW: Selects the input from USB TYPE A, and starts a Slideshow. • MY IMAGE: Displays the MY IMAGE menu ( 67). • MESSENGER: Turns the messenger text displayed on the screen on/off ( Messenger Function in the User's Manual - Network Guide
  • Hitachi CP-X4021N | Operating Guide - Page 58
    MODE dialog ( 44). MY SOURCE Using ▲/▼ buttons selects the picture input port to be selected with pressing the MY SOURCE/DOC.CAMERA button on the remote control. You can use this function not only for document cameras but also computers and other equipment. COMPUTER IN1 COMPUTER IN2 LAN USB TYPE
  • Hitachi CP-X4021N | Operating Guide - Page 59
    the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is
  • Hitachi CP-X4021N | Operating Guide - Page 60
    remote control. REMOTE FREQ. (1) Use the ▲/▼ button to change the projector's remote sensor frequency setting ( 4, 17). 1:NORMAL 2:HIGH (2) Use the ◄/► button to change the projector's remote the function of serial communication, refer to the User's Manual - Network Guide. (continued on next page) 60
  • Hitachi CP-X4021N | Operating Guide - Page 61
    it is required to control an external device as a network terminal, via this projector from the computer. The CONTROL port doesn't accept RS-232C commands ( Network Bridge Function in the User's Manual - Network Guide) OFF: Select this mode to receive RS-232C commands using the CONTROL port. • OFF
  • Hitachi CP-X4021N | Operating Guide - Page 62
    2s 3s SERVICE (continued) OFF: Select this mode if it is not required to check the responses from the device that the projector sends data to. In this mode, the projector can send out For more information about this menu, check our web site. ( User's Manual (concise)) (continued on next page) 62
  • Hitachi CP-X4021N | Operating Guide - Page 63
    a dialog titled "INPUT_INFORMATION". It shows the information about the current input. SERVICE (continued) • The "FRAME LOCK" message on the dialog means the frame to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, FILTER MESSAGE, NETWORK and SECURITY settings are not reset.
  • Hitachi CP-X4021N | Operating Guide - Page 64
    settings on this projector may cause trouble on the network projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the User's Manual - Network Guide
  • Hitachi CP-X4021N | Operating Guide - Page 65
    Use the buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. ( Date/Time Settings in the User's Manual - Network Guide) (continued on next page) 65
  • Hitachi CP-X4021N | Operating Guide - Page 66
    ENTER or INPUT button, 1 character or all characters will be erased.The PROJECTOR NAME can be input up to 64 characters. (3) To change an already and press the ►, ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press
  • Hitachi CP-X4021N | Operating Guide - Page 67
    To store images in the projector, the application software PJImg/Projector Image Tool that can be downloaded from our website is required. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( My Image Function in the User's manual - Network Guide) and the ► or ENTER button
  • Hitachi CP-X4021N | Operating Guide - Page 68
    a computer to the Presenter mode while its image is projected, the projector is occupied by the computer and access from any other computer is use "LiveViewer". For details, see the section Presenter mode in the User's Manual - Network Guide. MULTI PC MODE If you set one or more computers to the
  • Hitachi CP-X4021N | Operating Guide - Page 69
    details on how to switch the display mode to Multi PC mode on your computer, see the section Switching the display mode in the User's Manual - Network Guide. • The Presenter mode setting of the selected computer becomes valid when the display mode is changed to Single PC mode. Also, the Presenter
  • Hitachi CP-X4021N | Operating Guide - Page 70
    the network connection method in the User's manual - Network Guide. • Only the first 16 characters of the projector name are displayed. • When the input. Replace the battery suitably ( 93). • IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate "0.0.0.0" when DHCP is ON and the projector has
  • Hitachi CP-X4021N | Operating Guide - Page 71
    is as follows. CP-X4021N, CP-X5021N: 1700 CP-WX4021N: 0100 This password projector. (2) The 10 digit Inquiring Code will be displayed. Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user on the remote control or ► button on the projector will close the
  • Hitachi CP-X4021N | Operating Guide - Page 72
    note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to MyScreen PASSWORD on/off menu. When a password is set . Your password will be sent after your user registration information is confirmed. (continued on next page) 72
  • Hitachi CP-X4021N | Operating Guide - Page 73
    be displayed. • If there is no key input for about 5 minutes while the Inquiring Code is displayed, the projector will turn off. 3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN code will be sent after your user registration information is confirmed. (continued on next page) 73
  • Hitachi CP-X4021N | Operating Guide - Page 74
    projector will not display the input signal. • To display the signal again, set this function OFF. • After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp remote control or the ► button on the projector user registration information is confirmed. (continued on next page) 74
  • Hitachi CP-X4021N | Operating Guide - Page 75
    make note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to the MY TEXT PASSWORD on/off menu. 2 Turning off Your password will be sent after your user registration information is confirmed. (continued on next page) 75
  • Hitachi CP-X4021N | Operating Guide - Page 76
    TEXT will be displayed on the START UP screen and the INPUT_ INFORMATION when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT PASSWORD function is set to dialog. For more information about this menu, check our web site ( User's manual (concise)).
  • Hitachi CP-X4021N | Operating Guide - Page 77
    Presentation tools Presentation tools The projector has the following two convenient tools that enable on-screen are not supported. CP-X4021N, CP-X5021N: 1024X768 CP-WX4021N: 1280 x 800 (* Some computers may not support 1280 x 800.) • Files with a resolution smaller than 36x36 are not supported. •
  • Hitachi CP-X4021N | Operating Guide - Page 78
    Presentation tools PC-LESS Presentation (continued) Thumbnail mode The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen. Maximum 20 images are displayed in a screen. If you wish, you can jump into the Full Screen mode or Slideshow mode, after you select some
  • Hitachi CP-X4021N | Operating Guide - Page 79
    or keypad or a web browser software. The following functions can be supported while the Thumbnail is displayed. The remote control PAGE UP PAGE DOWN ENTER Button operation The keypad on Web Remote in web the projector browser software. Functions UP/DOWN/LEFT/RIGHT Move cursor - PAGE UP
  • Hitachi CP-X4021N | Operating Guide - Page 80
    Slideshow. Selects the Slideshow mode. Switches the input port. Displays the menu. Be sure to use this function before removing USB storage device from the projector. After that, the projector will not recognize a USB storage device until you insert it again into the USB TYPE A input port. 80
  • Hitachi CP-X4021N | Operating Guide - Page 81
    continued) Presentation tools NOTE • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode shows 20 pictures in the Thumbnail. This file seems to be broken or not supported format. A file that cannot be displayed on the thumbnail screen is indicated by a file
  • Hitachi CP-X4021N | Operating Guide - Page 82
    button on the keypad, or click [ENTER] on the Web Remote Control. Full screen display The following functions can be supported in the Full Screen mode. Button operation The remote control The keypad on the projector Web Remote in web browser software. ▼ ► or PAGE DOWN ▼ or ► DOWN, RIGHT
  • Hitachi CP-X4021N | Operating Guide - Page 83
    mode and press the ENTER button on the remote control or INPUT button on the projector. The following operations can be accessible while the Slideshow is displayed. The remote control ENTER Button operation The keypad on the projector Web Remote in web browser software. INPUT ENTER Functions
  • Hitachi CP-X4021N | Operating Guide - Page 84
    Presentation tools PC-LESS Presentation (continued) You can play the Slideshow at your desired configuration. Configure the Slideshow items in the Thumbnail. 1) RETURN : Returns to the thumbnail mode. 2) PLAY : Play the Slideshow. 3) START : Set the beginning number of the Slideshow. 4) STOP
  • Hitachi CP-X4021N | Operating Guide - Page 85
    Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files in the Thumbnail or Slideshow. The playlist file name is "playlist.txt" and it can be edited on a computer. It is created in the folder that
  • Hitachi CP-X4021N | Operating Guide - Page 86
    F on your computer, you will need to replace F with the correct drive letter assigned to your and its manual. ( User's Manual (concise)) Follow the instructions that can User's Manual - Network Guide) and this application cannot be used at the same time. If you connect your computer to the projector
  • Hitachi CP-X4021N | Operating Guide - Page 87
    before the button is clicked is remained on the screen. You can revise the image data on your computer without showing it on the projector's screen. r Option button The Options window is displayed. t Minimize button The Floating menu is closed, and the icon reappears in the Windows notification
  • Hitachi CP-X4021N | Operating Guide - Page 88
    for USB" captures screenshots in JPEG data and sends them to the projector. The "LiveViewer Lite for USB" has two options that have different display speed may be faster. CP-X4021N, CP-X5021N: 1024X768 (XGA) CP-WX4021N: 1280 x 800 If your computer does not support the display resolution specified
  • Hitachi CP-X4021N | Operating Guide - Page 89
    soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. Type number : DT01171 Replacing the lamp lamp cover 1. Turn the projector off, and unplug the power cord. Allow the
  • Hitachi CP-X4021N | Operating Guide - Page 90
    In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or
  • Hitachi CP-X4021N | Operating Guide - Page 91
    (Filter unit) The specified filter unit also comes with a replacement lamp for this projector. Please replace the filter unit as well when you replace the lamp. 1. Turn the projector off, and unplug the power cord. Allow the projector to sufficiently cool down. 2. Use a vacuum cleaner on and around
  • Hitachi CP-X4021N | Operating Guide - Page 92
    temperatures rise and could cause a fire, a burn or malfunction to the projector. NOTE • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. • The projector may display the message such as the "CHECK THE AIR FLOW" or turn
  • Hitachi CP-X4021N | Operating Guide - Page 93
    by replacement of the battery: HITACHI MAXELL, part number CR2032 or CR2032H. 1. Turn the projector off, and unplug the power cord. Allow the projector to by removing the battery. For setting the clock, see the User's Manual - Network Guide. WARNING ►Be careful of handling a battery, as a battery
  • Hitachi CP-X4021N | Operating Guide - Page 94
    Do not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the
  • Hitachi CP-X4021N | Operating Guide - Page 95
    to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks and User's Manual - Network Guide) The horizontal or vertical frequency of the input signal is not within the specified range. Please confirm the specs for your projector or the signal source specs
  • Hitachi CP-X4021N | Operating Guide - Page 96
    , please set FAN SPEED of the SERVICE item in the OPTION menu to HIGH. A note of precaution when cleaning the air filter. Please immediately turn the power off, and clean or change the air filter referring to the Cleaning and replacing the air filter section of this manual. After you have cleaned or
  • Hitachi CP-X4021N | Operating Guide - Page 97
    is displayed after the remedy, please change the lamp referring to the section Replacing the lamp. The lamp cover has not been properly fixed. Please turn the power off, and allow the projector to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make con
  • Hitachi CP-X4021N | Operating Guide - Page 98
    FAN SPEED of SERVICE item in section Cleaning and replacing the air fi projector. Please refer to Schedule Settings section of User's Manual - Network Guide. NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps
  • Hitachi CP-X4021N | Operating Guide - Page 99
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the the power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either of these has not been properly fi
  • Hitachi CP-X4021N | Operating Guide - Page 100
    Troubleshooting the volume to a higher level using the menu function or the remote control. 19, 46, 47 The AUDIO SOURCE/SPEAKER setting is not input to the port. Otherwise select other port for picture input. The projector does not recognize the USB storage device inserted into USB TYPE A port
  • Hitachi CP-X4021N | Operating Guide - Page 101
    level using the menu function. Pictures appear dark. The projector is operating in Eco mode. Set ECO MODE to NORMAL, and set AUTO ECO MODE to 44 OFF, in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. 89 ~ 90 Pictures appear blurry. Either the focus
  • Hitachi CP-X4021N | Operating Guide - Page 102
    Troubleshooting the computer, then 12 of the projector reconnect it after starting up the item in the 61 OPTION - SERVICE - COMMUNICATION menu. Network does cable between two hubs. Video files cannot The " Please refer to the Microsoft® Help and Support home - "LiveViewer" was page on how
  • Hitachi CP-X4021N | Operating Guide - Page 103
    Specifications Specifications Please see the Specifications in the User's Manual (concise) which is a book. End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
1
Projector
CP-X4021N/CP-X5021N/
CP-WX4021N
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read
User's Manual - Safety Guide
first. After reading them,
store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
±
•
Mac
®
is a registered trademark of Apple Inc.
•
Windows
®
, DirectDraw
®
and Direct3D
®
are registered trademarks of Microsoft Corporation
in the U.S. and/or other countries.
•
VESA and DDC are trademarks of the Video Electronics Standard Association.
•
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
•
Trademark PJLink is a trademark applied for trademark rights
in Japan, the United States of America and other countries and
areas.
• Blu-ray Disc is a trademark.
All other trademarks are the properties of their respective owners.
NOTICE
This entry notices of fear of causing trouble.