Hitachi CP-X4021N Technical Manual

Hitachi CP-X4021N Manual

Get Hitachi CP-X4021N PDF manuals and user guides View all Hitachi CP-X4021N manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-X4021N manual content summary:

  • Hitachi CP-X4021N | Technical Manual - Page 1
    Projector CP-X4021N/CP-X5021N/ CP-WX4021N User's Manual (detailed) Operating Guide - Technical Example of computer signal Resolution (H x check jack type, signal level, timing and resolution before connecting this projector to a PC. • Some PCs may have multiple display screen modes. Use of
  • Hitachi CP-X4021N | Technical Manual - Page 2
    V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Data H. Sync. Active video (C) Sync (A) Data V. Sync. Active video (c) Sync (a) Resolution (H x V) 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600
  • Hitachi CP-X4021N | Technical Manual - Page 3
    cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. A B A COMPUTER IN1, B MONITOR OUT D-sub 15pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. signal: TTL level (positive
  • Hitachi CP-X4021N | Technical Manual - Page 4
    @50/60, 1080i@50/60, 1080p@50/60 Port Signal Y Component video Y, 1.0±0.1Vp-p with composite sync, 75Ω terminator Cb/Pb Component video Cb/Pb, 0.7±0.1Vp-p, 75Ω terminator Cr/Pr Component video Cr/Pr, 0.7±0.1Vp-p, 75Ω terminator E S-VIDEO Mini DIN 4pin jack 43 21 • System: NTSC, PAL, SECAM
  • Hitachi CP-X4021N | Technical Manual - Page 5
    (continued) G L H M I J K G HDMI • Type :Digital audio/video connector • Audio signal : Linear PCM (Sampling rate; 32/44.1/48 kHz) level> • 20 mVrms, 1kΩ terminator M REMOTE CONTROL K IN L OUT Ø3.5 stereo mini jack • To be connected with the remote control that came with the projector. 5
  • Hitachi CP-X4021N | Technical Manual - Page 6
    Connection to the ports (continued) N O Q P N USB TYPE A USB A type jack Pin Signal 1 +5V 2 - Data 3 + Data 4 Ground O USB TYPE B 43 4321 USB B type jack Pin Signal 21 1 +5V 2 - Data 3 + Data 4 Ground P CONTROL D-sub 9pin plug • About the details of RS-232C communication, please
  • Hitachi CP-X4021N | Technical Manual - Page 7
    To input SCART RGB signal; ex. SCART connector (jack) SCART Connection to the ports (continued) SCART cable (plug) RCA plugs To input SCART RGB signal to the projector, use a SCART to RCA cable. Connect the plugs refer to above ex.. For more reference, please consult your dealer. 7
  • Hitachi CP-X4021N | Technical Manual - Page 8
    in figure 3. Turn the computer on, and after the computer has started up turn the projector on. 4. Set the COMMUNICATION TYPE to OFF. ( OPTION menu - SERVICE COMMUNICATION in the User's Manual - Operating Guide) RS-232C CONTROL RS-232C Cable (cross) RS-232C port of the computer CONTROL port of
  • Hitachi CP-X4021N | Technical Manual - Page 9
    LH Setting code LH Change setting to desired value [(cL)(cH)] by [(eL)(eH)]. (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) Read projector internal setup value [(bL) (bH)] . (aL) (aH) 02h 00h (bL) (bH) 00h 00h Increment setup value BEh EFh 03h 06h 00h (aL) (aH) 04h
  • Hitachi CP-X4021N | Technical Manual - Page 10
    projector to your devices, please read the manual for each devices, and connect them correctly with suitable cables. • Operation cannot be guaranteed when the projector any other code. • The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.
  • Hitachi CP-X4021N | Technical Manual - Page 11
    web browser. For details of RS-232C commands, refer to RS-232C Communication / Network command table ( 17). Connection 1. Turn off the projector and the computer. 2. Connect the projector's LAN port and the computer's LAN port with a LAN cable. Use the cable that fulfills the specification shown in
  • Hitachi CP-X4021N | Technical Manual - Page 12
    Command Control via the Network (continued) Communicaion Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Configure the following items form a web browser when command control is used. Port Settings Network Control Port1 (Port: 23) Port open Authentication
  • Hitachi CP-X4021N | Technical Manual - Page 13
    the checksum. [Connection ID] Random value from 0 to 255 (This value is attached to the reply data). NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data. • Provide an interval of at least 40ms between the response code and any other code. • Commands are not
  • Hitachi CP-X4021N | Technical Manual - Page 14
    the authentication password is set to "password" and the random 8 bytes are "a572f60c". 1) Select the projector. 2) Receive the random 8 bytes "a572f60c" from the projector. 3) Bind the random 8 bytes "a572f60c" and the authentication password "password" and it becomes "a572f60cpassword". 4) Digest
  • Hitachi CP-X4021N | Technical Manual - Page 15
    devices that you want to control with a RS-232C cable. 3. Turn the computer on, and after the computer has started up turn the projector on. 4. Set the COMMUNICATION TYPE to NETWORK BRIDGE. ( OPTION menu SERVICE - COMMUNICATION in the User's Manual - Operating Guide) LAN LAN CONTROL RS-232C 15
  • Hitachi CP-X4021N | Technical Manual - Page 16
    OPTION - SERVICE - COMMUNICATION menu. ( OPTION menu - SERVICE - COMMUNICATION in the User's Manual - Operating Guide) Item the projector to your devices, please read the manual for each devices, and connect them correctly with suitable cables. • Turn off (the power of ) both the projector and
  • Hitachi CP-X4021N | Technical Manual - Page 17
    BE EF 03 06 00 AE D1 01 00 00 20 05 00 Input Source Set S-VIDEO VIDEO BE EF 03 06 00 9E D3 01 00 00 20 BE EF 03 06 00 6E return] Error Status Get 00 00 [Normal] 01 00 02 00 03 00 [Cover error] [Fan error] [Lamp error] 04 00 05 00 07 00 08 00 [Temp error] [Air flow error] [Cold error] [
  • Hitachi CP-X4021N | Technical Manual - Page 18
    CONTRAST Reset GAMMA User Gamma Pattern User Gamma Point 1 User Gamma Point 1 Reset User Gamma Point 2 User Gamma Point 2 Reset User Gamma Point 3 User Gamma Point 3 Reset User Gamma Point 4 User Gamma Point 4 Reset User Gamma Point 5 User Gamma Point 5 Reset User Gamma Point 6 User Gamma Point
  • Hitachi CP-X4021N | Technical Manual - Page 19
    RS-232C Communication / Network command table (continued) Names Operation Type User Gamma Point 7 User Gamma Point 7 Reset User Gamma Point 8 User Gamma Point 8 Reset COLOR TEMP Set COLOR TEMP GAIN R COLOR TEMP GAIN R Reset COLOR TEMP GAIN G COLOR TEMP GAIN G Reset COLOR TEMP GAIN B COLOR TEMP
  • Hitachi CP-X4021N | Technical Manual - Page 20
    00 08 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (*) only for CP-WX4021N (continued on next page) 20
  • Hitachi CP-X4021N | Technical Manual - Page 21
    Names Operation Type H POSITION H POSITION Reset H PHASE H SIZE H SIZE Reset AUTO ADJUST EXECUTE PROGRESSIVE Set VIDEO NR Set COLOR SPACE Set COMPONENT Set S-VIDEO Set FORMAT C-VIDEO Set FORMAT Get Increment Decrement Execute Get Increment Decrement Get Increment Decrement Execute Execute OFF TV
  • Hitachi CP-X4021N | Technical Manual - Page 22
    RS-232C Communication / Network command table (continued) Names Operation Type AUTO HDMI FORMAT Set VIDEO COMPUTER Get AUTO HDMI RANGE Set NORMAL ENHANCED Get AUTO COMPUTER IN1 Set SYNC ON G OFF Get AUTO COMPUTER IN2 Set SYNC ON G OFF Get
  • Hitachi CP-X4021N | Technical Manual - Page 23
    RS-232C Communication / Network command table (continued) Names Operation Type PERFECT FIT Left Bottom -H PERFECT FIT Left Bottom -V PERFECT FIT Right Bottom -H PERFECT FIT Right Bottom -V PERFECT FIT Reset PERFECT FIT Left Side Distortion PERFECT FIT Right Side Distortion PERFECT FIT Distortion
  • Hitachi CP-X4021N | Technical Manual - Page 24
    LAN MONITOR OUT- Set USB TYPE A MONITOR OUT Set - USB TYPE B MONITOR OUT Set - STANDBY VOLUME COMPUTER IN1 VOLUME COMPUTER IN2 VOLUME COMPONENT VOLUME S-VIDEO COMPUTER IN1 OFF Get COMPUTER IN2 OFF Get COMPUTER IN1 COMPUTER IN2 OFF Get COMPUTER IN1 COMPUTER IN2 OFF Get COMPUTER IN1 COMPUTER IN2 OFF
  • Hitachi CP-X4021N | Technical Manual - Page 25
    RS-232C Communication / Network command table (continued) Names Operation Type VOLUME VIDEO VOLUME - HDMI VOLUME - LAN VOLUME - USB TYPE A VOLUME - USB TYPE B VOLUME STANDBY MUTE Set SPEAKER Set AUDIO SOURCE - Set COMPUTER IN1 AUDIO SOURCE - Set COMPUTER
  • Hitachi CP-X4021N | Technical Manual - Page 26
    00 01 DD AUDIO IN1 BE EF 03 06 00 D6 DD AUDIO SOURCE - Set S-VIDEO AUDIO IN2 AUDIO IN3 OFF BE EF 03 06 00 26 DD BE EF 03 06 00 BE EF 03 06 00 67 D7 NOTE) Not all of the languages in this table are supported. (continued on next page) 26 Command Data Action Type Setting code 01 00 01 00 01
  • Hitachi CP-X4021N | Technical Manual - Page 27
    BE EF 03 06 00 57 DA Get BE EF 03 06 00 C4 D3 NOTE) Not all of the languages in this table are supported. MENU POSITION H Get Increment Decrement BE EF 03 BE EF 03 BE EF 03 06 00 06 00 06 00 04 D7 62 D7 B3
  • Hitachi CP-X4021N | Technical Manual - Page 28
    DISPLAY Set C. C. - MODE Set C. C. - Set CHANNEL AUTO SEARCH Set AUTO Set KEYSTONE DIRECT Set POWER ON AUTO POWER OFF USB TYPE B Set LAMP TIME LAMP TIME Reset FILTER TIME FILTER TIME Reset TEST PATTERN DOT-LINE1 DOT-LINE2 DOT-LINE3 DOT-LINE4 CIRCLE 1 CIRCLE 2 MAP 1 MAP 2 STACK Get OFF ON
  • Hitachi CP-X4021N | Technical Manual - Page 29
    03 06 00 HDMI BE EF 03 06 00 COMPONENT BE EF 03 06 00 S-VIDEO BE EF 03 06 00 VIDEO BE EF 03 06 00 SLIDESHOW BE EF 03 06 00 MY IMAGE BE EF 03 03 06 00 HDMI BE EF 03 06 00 COMPONENT BE EF 03 06 00 S-VIDEO BE EF 03 06 00 VIDEO BE EF 03 06 00 SLIDESHOW BE EF 03 06 00 MY IMAGE, BE EF
  • Hitachi CP-X4021N | Technical Manual - Page 30
    FREQ. Set NORMAL REMOTE FREQ. Set HIGH MY IMAGE Set MY IMAGE IMAGE-1 Delete MY IMAGE IMAGE-2 Delete MY IMAGE IMAGE-3 Delete MY IMAGE IMAGE-4 Delete COMPUTER IN1 COMPUTER IN2 LAN USB TYPE A USB TYPE B HDMI COMPONENT S-VIDEO VIDEO Get Get Increment Decrement Get Increment Decrement OFF ON Get OFF
  • Hitachi CP-X4021N | Technical Manual - Page 31
    AV Mute AV Mute inquiry Parameter or Response 0 = Standby 1 = Power On 0 = Standby 1 = Power On 2 = Cool Down 11 = COMPUTER IN 1 12 = COMPUTER IN 2 21 = COMPONENT 22 = S-VIDEO 23 = VIDEO 31 = HDMI 41 = USB TYPE A 51 = LAN 52 = USB TYPE B 11 = COMPUTER IN 1 12 = COMPUTER IN 2 21 = COMPONENT 22
  • Hitachi CP-X4021N | Technical Manual - Page 32
    = Warning; 2 = Error 1st number (digits 1 to 5): Lamp Time 2nd number : 0 = Lamp off, 1 = Lamp on 11 12 21 22 23 31 41 51 52 Responds with the name set in "PROJECTOR NAME" of "NETWORK" HITACHI Your model name, "CP-X4021N", "CP-X5021N" or "CP-WX4021N". Responds with the factory information and so on
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
1
NOTE
• Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these modes
will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA (1600x1200),
the signal will be converted to the projector’s panel resolution before being displayed.
The best display performance will be achieved if the resolutions of the input signal
and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite
sync or a sync on G.
Projector
CP-X4021N/CP-X5021N/
CP-WX4021N
User's Manual (detailed)
Operating Guide – Technical
Resolution (H x V)
H. frequency (kHz)
V. frequency (Hz)
Rating
Signal mode
720 x 400
37.9
85.0
VESA
TEXT
640 x 480
31.5
59.9
VESA
VGA (60Hz)
640 x 480
37.9
72.8
VESA
VGA (72Hz)
640 x 480
37.5
75.0
VESA
VGA (75Hz)
640 x 480
43.3
85.0
VESA
VGA (85Hz)
800 x 600
35.2
56.3
VESA
SVGA (56Hz)
800 x 600
37.9
60.3
VESA
SVGA (60Hz)
800 x 600
48.1
72.2
VESA
SVGA (72Hz)
800 x 600
46.9
75.0
VESA
SVGA (75Hz)
800 x 600
53.7
85.1
VESA
SVGA (85Hz)
832 x 624
49.7
74.5
Mac 16” mode
1024 x 768
48.4
60.0
VESA
XGA (60Hz)
1024 x 768
56.5
70.1
VESA
XGA (70Hz)
1024 x 768
60.0
75.0
VESA
XGA (75Hz)
1024 x 768
68.7
85.0
VESA
XGA (85Hz)
1152 x 864
67.5
75.0
VESA
1152 x 864 (75Hz)
1280 x 768
47.7
60.0
VESA
W-XGA (60Hz)
1280 x 800
49.7
60.0
VESA
1280 x 800 (60Hz)
1280 x 960
60.0
60.0
VESA
1280 x 960 (60Hz)
1280 x 1024
64.0
60.0
VESA
SXGA (60Hz)
1280 x 1024
80.0
75.0
VESA
SXGA (75Hz)
1280 x 1024
91.1
85.0
VESA
SXGA (85Hz)
1400 x 1050
65.2
60.0
VESA
SXGA+ (60Hz)
1600 x 1200
75.0
60.0
VESA
UXGA (60Hz)
Example of computer signal