Home » Hitachi Manuals » Projectors » Hitachi CP-X430W » Manual Viewer

Hitachi CP-X430W User Manual

Hitachi CP-X430W Manual

View all Hitachi CP-X430W manuals

Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-X430W manual content summary:

Hitachi CP-X430W | User Manual - Page 1
TECHNICAL PORTGÊS NORSK NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Liquid Crystal Projector CP-X430W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. BEDIENUNGSANLEITUNG Bitte lessen Sie diese Bedienungsanleitung zugunsten der
Hitachi CP-X430W | User Manual - Page 2
Thank you for purchasing this liquid crystal projector. WARNING • Please read the accompanying manual "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE
Hitachi CP-X430W | User Manual - Page 3
Projector Liquid Crystal Projector CP-X430W USER'S MANUAL Please read this user's manual este manual do usuário. TECHNICAL REGULATORY NOTICES User's Manual (this manual) Safety Instructions Carrying VIDEO RGB Batteries for Remote Control Transmitter AUTO MENU KEYSTONE MENU SELECT POSITION
Hitachi CP-X430W | User Manual - Page 4
Intake) Zoom Knob Focus Ring Remote Control Sensor Lens Foot Adjuster Lens Cap FRONT/LEFT VIEW OF THE PROJECTOR Control Panel (Refer to INPUT Button LAMP Indicator TEMP Indicator POWER Indicator RESET Button MENU Button Ventilation Openings (exhaust) REAR/RIGHT VIEW OF THE PROJECTOR S-VIDEO
Hitachi CP-X430W | User Manual - Page 5
. The laser beam can cause vision problems. CAUTION • Use of controls or remote control transmitter. • Do not wet the remote control transmitter or place it on any wet object. • Do not place the remote control transmitter close to the cooling fan of the projector. • Do not disassemble the remote
Hitachi CP-X430W | User Manual - Page 6
Close the battery cover. CAUTION • Use only the specified batteries with this remote control transmitter. Also, do not mix new and old batteries. This could from the remote control transmitter. NOTE Replace the batteries when remote control transmitter operation becomes difficult. ENGLISH-5
Hitachi CP-X430W | User Manual - Page 7
CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual "SAFETY INSTRUCTIONS" and this manual. • When you fix • Do not install LCD projector in smoke effected environment. Smoke residue may buildup on critical parts (i.e.LCD panel, Lens Assy etc
Hitachi CP-X430W | User Manual - Page 8
have to be used with the core set to the projector side. Use the cables which are included with the projector or specified. NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device. • Secure the screws on the
Hitachi CP-X430W | User Manual - Page 9
computer, set to valid the RGB external image output (setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of the notebook for more information. Plug & Play This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is
Hitachi CP-X430W | User Manual - Page 10
remote INSTRUCTIONS" thoroughly before using the equipment. Always ensure that the equipment is used safely. NOTE • Except in emergencies, follow the above-mentioned procedure for turning power off. Incorrect procedure will reduce the life of the projector lamp and LCD panel. • To prevent any trouble
Hitachi CP-X430W | User Manual - Page 11
OPERATIONS (continued) Basic Operation The basic operations shown in Table 3 is performed from the supplied remote control transmitter or the projector control panel. Items indicated by (*) may be used from the control panel. Table 3 . Basic Operation Item INPUT SELECT POSITION Description Select
Hitachi CP-X430W | User Manual - Page 12
menu display is terminated automatically after approximately 10 seconds of inactivity. MENU SELECT Select Menu Type: Press the MENU SELECT button. Allows the user to select the normal menu or the single menu. Only the selected item is displayed on the single menu, and other items are displayed
Hitachi CP-X430W | User Manual - Page 13
OPERATIONS (continued) Setup Menu The following adjustments and settings are possible when SETUP is selected at the top of the menu. Part of the Setup menu differs between RGB input and video input. Select an item with the and buttons, and start operation. Use the Single menu to reduce menu size (
Hitachi CP-X430W | User Manual - Page 14
requires approximately 10 seconds. It may not function correctly with some input signals. Pressing the AUTO button in this case may correct this problem. • This function is the same as for the AUTO function in Basic operation. RGB Displays RGB Input Frequency: Displays the horizontal and vertical
Hitachi CP-X430W | User Manual - Page 15
OPERATIONS (continued) Image Menu The following adjustments and settings are available when IMAGE is selected on the menu. Select an item with the and buttons, and start or stop operation with the and buttons. Table 6. Image Menu Item Description SETUP INPUT BLANK START UP MyScreen MIRROR P. IN
Hitachi CP-X430W | User Manual - Page 16
or stop operation with the and buttons. Table 7. Options Menu SETUP INPUT VOLUME MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER IR REMOTE IMAGE OPT. 16 Item Description VOLUME Reduce ↔ Increase MENU COLOR Select Menu Background Color: Select with the / button. LANGUAGE Select Menu Display
Hitachi CP-X430W | User Manual - Page 17
no signal is received.Select an item with the SYNC ON G WHISPER and buttons, and start or stop operation with the and buttons. IR REMOTE Table 8. No Signal Menu Item Description VOLUME Reduce ↔ Increase • When this function is used, audio input is automatically switched to video. The audio
Hitachi CP-X430W | User Manual - Page 18
component in the projector and not necessarily the lamp. If unsure contact your local service center. • If it is probable that the lamp has exploded (explosive sound is heard), disconnect the power plug from the power outlet and ask your dealer to replace lamp. The lamp is covered by front
Hitachi CP-X430W | User Manual - Page 19
injury or accidents. • Do not use the projector with the lamp cover removed. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. When the lamp has been replaced after the LAMP indicator is red, or the CHANGE THE LAMP message is displayed, complete the following operation within
Hitachi CP-X430W | User Manual - Page 20
INSTRUCTIONS" thoroughly to ensure that maintenance is performed correctly. • Replace prevent the temperature rising inside the projector. Other Maintenance Maintenance Inside the the lens with your hands. Cleaning the Cabinet and Remote control transmitter Gently wipe with a soft cloth. If
Hitachi CP-X430W | User Manual - Page 21
TROUBLESHOOTING OSD Message The messages as described below may appear on the screen at power ON. Take the appropriate measures when such messages appears. Table 9. OSD Messages Message Contents CHANGE THE LAMP The usage time of lamp will be reaching 2000 hr AFTER REPLACING LAMP, shortly.(*2)
Hitachi CP-X430W | User Manual - Page 22
TROUBLESHOOTING (continued) Indicators Message The POWER indicator, LAMP indicator, and TEMP indicator are lit and blank as follows. Take the appropriate measures. Table 10. Indicators Message POWER LAMP Replace the lamp if the same problem occurs. Blinks /Lights red Blinks red Lamp or lamp
Hitachi CP-X430W | User Manual - Page 23
TROUBLESHOOTING Use the projector or remote control transmitter to set. 10 No video or audio. No signal input. Connect correctly. 7,8 The projector is not video. 12 Images are dark. The lamp is nearing the end of its service life. Replace with a new lamp. 17 WHISPER mode is set. Clear
Hitachi CP-X430W | User Manual - Page 24
projector Liquid crystal panel Panel size Drive system Pixels 2.3 cm (0.9 type) TFT active matrix 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens F=1.7 ~ 2.1 f=36.8 ~ 47.8 mm Lamp pin shrink plug USB jack (B type) Optional Parts Lamp: DT00471 Air Filter: NJ06131 * For others,
Hitachi CP-X430W | User Manual - Page 25
WARRANTY AND AFTER-SERVICE If a problem occurs with the equipment, first refer to the P.20 "TROUBLESHOOTING" section and run through the suggested checks. If this does not resolve the problem contact your dealer or service company. They will tell you what warranty condition is applied. ENGLISH-24
Hitachi CP-X430W | User Manual - Page 26
TECHNICAL Dimension Diagram 228 241.5 298 76 94.6 54 76.5 Unit : mm Signal Connector Pin Assignment 1. D-sub 15-pin Shrink Connector (RGB IN 1/RGB IN 2/RGB OUT) Pin No Signal Pin No Signal Pin No Signal 1 Video input Red 2 Video input Green 3 Video input Blue 4 - 5 Ground 6
Hitachi CP-X430W | User Manual - Page 27
56Hz) SVGA (60Hz) SVGA (72Hz) SVGA (75Hz) SVGA (85Hz) Mac16"mode XGA (60Hz) XGA (70Hz) XGA (75Hz) XGA (85Hz) SXGA (75Hz) SXGA (60Hz) SXGA (60Hz) SXGA (75Hz) Display with this projector. • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer
Hitachi CP-X430W | User Manual - Page 28
) Mac 13"mode VGA (72Hz) VGA (75Hz) VGA (85Hz) SVGA (56Hz) SVGA (60Hz) SVGA (72Hz) SVGA (75Hz) SVGA (85Hz) Mac 16"mode XGA (60Hz) XGA (70Hz) XGA (75Hz) XGA (85Hz) 1152×864 (75Hz) 1280×960 (60Hz) 1280×1024 (60Hz) 1280×1024 (75Hz) Vertical signal timimg (lines) a b c d 3 60 350 32 3 41 400
Hitachi CP-X430W | User Manual - Page 29
and "MOUSE/RIGHT button" of page 4. 2. USB Mouse (1) Connect the projector and computer with a suitable commercially available USB cable. Consult your dealer to /RIGHT button" of page 4. NOTE • Before connecting, read the instruction manuals of the devices to be connected. • In the case of notebook
Hitachi CP-X430W | User Manual - Page 30
ADB Mouse CONTROL Terminal D-sub 15-pin shrink jack Serial Mouse CONTROL Terminal D-sub 15-pin shrink jack Projector 1 2 DATA 3 4 5 6 RTS 7 8 +5V 9 GND 10 11 12 13 14 15 Projector 1 2 3 4 5 SEL0 6 RTS 7 8 9 GND 10 11 12 13 TD 14 15 USB Mouse Computer 1 ADB 2 (POWER ON) 3 +5V 4 GND
Hitachi CP-X430W | User Manual - Page 31
the RS-232C cable. (2) Turn on the computer power supply and, after the computer has started up, turn on the projector power supply. Control jack D-sub 15-pin shrink jack Projector 1 2 3 4 5 SELO 6 RTS 7 8 9 GND 10 11 12 RD 13 TD 14 15 Computer 1 CD 2 RD 3 TD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS
Hitachi CP-X430W | User Manual - Page 32
an undefined command or data. • Provide an interval of at least 40ms between the response code and any other code. • The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data. • Commands are not accepted during warm-up. TECHNICAL - 7 TECHNICAL
Hitachi CP-X430W | User Manual - Page 33
TECHNICAL (continued) Names Blank Color Mirror Freeze Menu Color Startup Language Operation type Red Orange Green Set Blue Purple White Black Get Normal H Inverse Set V lnverse H&V Inverse Get Normal Set Freeze Get Red Orange Green Set Blue Purple Transparent Gray Get Turn
Hitachi CP-X430W | User Manual - Page 34
of Return) 00 00 01 00 02 00 03 00 Get (Normal) (Cover-error) (Fan-error) (Lamp-error) Power OFF Set ON Get RGB1 04 00 05 00 06 00 (Temp-error) (Air flow-error) (Lamp-Time-over) BE EF BE EF BE EF 03 06 00 2A D3 01 00 00
Hitachi CP-X430W | User Manual - Page 35
TECHNICAL (continued) Names Operation type Mute Brightness Contrast Color Balance R Color Balance B Keystone_V Aspect Display Position at 16 : 9 or Small V.Position H.Position H.Size H.Phase Normal Set Mute Get Get Increment Decrement Get Increment Decrement Get Increment Decrement
Hitachi CP-X430W | User Manual - Page 36
TECHNICAL (continued) Names Operation type Sharpness Color Tint Video Format HDTV Get Increment Decrement Get Increment Decrement Get Increment Decrement Auto NTSC PAL Set SECAM NTSC 4.43 M-PAL N-PAL Get 1080i Set 1035i Get Command data chart Header Command data CRC Action Type
Hitachi CP-X430W | User Manual - Page 37
TECHNICAL (continued) Names Operation type Set Sync on G Set WHISPER Set GAMMA Set COLOR TEMP off on Get NORMAL WHISPER Get NORMAL CINEMA DYNAMIC Get NORMAL LOW Get Command data chart Header Command data CRC Action Type Setting code BE EF 03 06 00 CB D0 01 00 08 30 01 00 BE EF 03 06 00 5B
Hitachi CP-X430W | User Manual - Page 38
radio/TV technician for help. INSTRUCTIONS TO USERS: This equipment complies with the projector side. Use the cables which are included with the projector or specified. Core CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user
Hitachi CP-X430W | User Manual - Page 39
CA 94005-1835 Tel: +1-800-225-1741 Fax: +1-650-244-7776 www.hitachi.com/lcd. Hitachi Canada, Ltd. 6740 Campobello Road, Mississauga, Ontario L5N2L8, Canada Tel: +1-905-821-4545 Fax: +1-905-821-1101 Hitachi Home Electronics (Europe), Ltd. Dukes Meadow, Millboard Road, Bourne End , Buckinghamshire SL8