Hitachi CP-X443 User Manual
Hitachi CP-X443 Manual
 |
View all Hitachi CP-X443 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-X443 manual content summary:
- Hitachi CP-X443 | User Manual - Page 1
Projector CP-X443 User Manual - Operating Guide Thank you for purchasing this projector. WARNING ►Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. About this manual - Hitachi CP-X443 | User Manual - Page 2
About this manual 1 Contents 2 Projector features 3 Preparations 3 About contents of package 3 Fastening the lens cap 3 Part names 4 Projector 4 Control buttons 5 Remote control 5 EASY Menu 24 Aspect, Mode, Bright, Contrast, Color, Tint, Sharpness, Whisper, Mirror, Reset, Filter time - Hitachi CP-X443 | User Manual - Page 3
Please see the "Contents of package" of the "User's Manual - Quick Guide". Your projector should come with the items shown there. Contact Use special caution for the lens part. Fastening the lens cap To avoid losing, please fasten the lens cap to the projector using the strap. Strap ring Strap - Hitachi CP-X443 | User Manual - Page 4
Part names Part names Projector Zoom knob (18) Focus ring (18) Vent (6) Lens (16) Front-Right side Lamp cover (45) (Lamp unit is inside.) Remote sensor (15) Speaker Elevator button (8) Elevator foot (8) Filter cover (46) (Air filter and intake vent are inside.) Control buttons (5) (See - Hitachi CP-X443 | User Manual - Page 5
(16) STANDBY/ON INPUT KEYSTONE INPUT button (17) KEYSTONE button (20) RESET button (23) LAMP TEMP POWER MENU RESET Part names LAMP incicator (50) TEMP indicator (50) POWER indicator (16) Cursor buttons 23) Remote control STANDBY/ON button (16) VIDEO button (17) BLANK button (21 - Hitachi CP-X443 | User Manual - Page 6
in the side/front/rear-up position, except care of the air filter. • For the projector installed bottom-up, use the accessory filter cover for bottom- up use. And in the case of a ceiling installation or the like, contact your dealer before installation. ►Place the projection in a cool place, and - Hitachi CP-X443 | User Manual - Page 7
The values shown in the table are calculated for a full size screen: 1024 x 768 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (c) The height of the screen (±10%) (b) 4:3 (a) 16:9 (a) (c) up (c) down At 4:3 screen (a) Screen size (b) Projection distance - Hitachi CP-X443 | User Manual - Page 8
horizontally. You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees. Elevator feet - Hitachi CP-X443 | User Manual - Page 9
Setting up About the filter cover for bottom-up use WARNING ►Do not replace the filter cover during use or immediately after use. While the projector connects with a power supply, or the projector is in a high temperature state, handling could cause an electric shock, a fire, a burn and/or malfunction - Hitachi CP-X443 | User Manual - Page 10
projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual if the HDCP standards are modified, the CP-X443's DVI might not be able to display video - Hitachi CP-X443 | User Manual - Page 11
RGB OUT CR/PR CB/PB Y RGB IN2 CONTROL R-AUDIO IN-L VIDEO S-VIDEO RS-232C cable Stereo mini audio cable DVI-D AUDIO-IN AUDIO-OUT REMOTE CONTROL Stereo mini audio cable RGB out Audio out RGB cable Connecting to a monitor (output) LAN USB DC OUT RGB IN1 RGB IN2 COMPONENT VIDEO - Hitachi CP-X443 | User Manual - Page 12
Audio (L) out Audio (R) out COMPONENT VIDEO RGB OUT CR/PR CB/PB Y R-AUDIO IN-L VIDEO S-VIDEO RGB IN2 CONTROL DVI-D AUDIO-IN AUDIO-OUT REMOTE CONTROL S-Video out Audio (L) out Audio (R) out S-Video cable Audio cable LAN USB DC OUT RGB IN1 COMPONENT VIDEO RGB OUT CR/PR CB/PB - Hitachi CP-X443 | User Manual - Page 13
the power cord as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated for use with the - Hitachi CP-X443 | User Manual - Page 14
problems. CAUTION ►Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. LAINSDEIRCATORRGB STANDBY/ON VIDEO UP PADGOEWN LASER BLANK ASPECT RESET remote control. 3. Close the battery cover. Replace the battery cover - Hitachi CP-X443 | User Manual - Page 15
for an extended period. • Replace the batteries whenever the remote control starts to malfunction. • When strong lights, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hit the projector's remote sensor, the remote control may cause to - Hitachi CP-X443 | User Manual - Page 16
projector before the connected devices. Power off the projector after the connected devices. LASER INDICATOR STANDBY/ON VIDEO RGB BLANK UP PAGE DOWN LASER ASPECT PUSH ENTER ESC MENU RESET the STANDBY/ON button on the projector or remote control. The projector lamp will light up and the POWER - Hitachi CP-X443 | User Manual - Page 17
/ON 1. Press the INPUT button on the projector. Each time you press the button, the projector switches its input INPUT KEYSTONE MENU RESET port as below. RGB IN1 RGB IN2 DVI-D VIDEO S-VIDEO COMPONENT VIDEO 1. Press the RGB button on the remote control to select an input port for RGB - Hitachi CP-X443 | User Manual - Page 18
ASPECT Operating PUSH ENTER Adjusting screen with ONE-TOUCH ESC MENU RESET 1. Press the ONE TOUCH button on the remote control. This activates the following functions at one time. POSITION AUTO MAGNIFY ON VOLUME Signal search: Projector will cycle through its input ports in order to find - Hitachi CP-X443 | User Manual - Page 19
the cursor buttons to adjust the picture position. POSITION AUTO MAGNIFY ON VOLUME FREEZE MUTE When you want to reset the operation, press the RESET button on tOFhF e remote KEYSTONE ONE TOUCH control during the operation. To complete this operation, press the POSITION button again. Even if - Hitachi CP-X443 | User Manual - Page 20
distortions 1. Press the KEYSTONE button on the projector or the remote control. A dialog will appear on KEYSTONE the screen to aid you in correcting the distortion. AUTO EXECUTE MANUAL +0 +0 2. Use the cursor buttons ▲/▼ to select AUTO or MANUAL operation, and press the button ► to - Hitachi CP-X443 | User Manual - Page 21
ASPECT Freezing the screen Operating PUSH ENTER ESC MENU RESET 1. Press the FREEZE button on the remote control. The "FREEZE" indication will appear on the screen, and the projector will enter the FREEZE mode. To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again - Hitachi CP-X443 | User Manual - Page 22
computer. • Before connecting, read the manuals of the computer you will connect. function is not available while the lamp is warming up (the POWER indicator keyboard control 1. Connect the projector's USB port to the DOWN key Press keyboard's ESC key Remote control operation Move using on the - Hitachi CP-X443 | User Manual - Page 23
ON VIDEO RGB LAMP ENTER button RESET 2. Use the cursor buttons ▲/▼ to select a menu. If you want to change it to the EASY MENU, select the FILTER TIME 0 LANGUAGE ENGLISH Go To Advance Menu... EASY MENU. Then press the cursor button ► on the projector or remote - Hitachi CP-X443 | User Manual - Page 24
on the projector or remote control. Then perform it referring to the following table. EASY MENU ASPECT 4:3 MODE NORMAL BRIGHT +0 CONTRAST +0 COLOR +0 TINT +0 SHARPNESS +3 WHISPER NORMAL MIRROR NORMAL RESET FILTER TIME 0 LANGUAGE - Hitachi CP-X443 | User Manual - Page 25
the filter timer which counts use time of air filter. A dialog is displayed to make sure. Selecting RESET using the button ▲ performs reset. See the item FILTER TIME of section OPTION menu (39). Select the LANGUAGE to toggle the menu language. Refer to description of LANGUAGE in the SCREEN menu - Hitachi CP-X443 | User Manual - Page 26
IMAGE BRIGHT ＋0 CONTRAST ＋0 Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to VIDEO Qlty. GAMMA - Hitachi CP-X443 | User Manual - Page 27
PICTURE Menu (continued) Multifunctional settings Item Description Using the buttons ▲/▼ switches the mode of color temperature. HIGH MIDDLE LOW CUSTOM COLOR TEMP COLOR TINT SHARPNESS To adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a - Hitachi CP-X443 | User Manual - Page 28
and then pressing the button ► or the ENTER button performs each function. LOAD1 LOAD2 LOAD3 LOAD4 SAVE4 SAVE3 SAVE2 SAVE1 This projector has 4 numbered memories for adjustment data. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the memory whose number corresponds with the - Hitachi CP-X443 | User Manual - Page 29
below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] :SELECT - Hitachi CP-X443 | User Manual - Page 30
DVI-D). • When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button on the remote control during this operation. Selecting this item performs the automatic adjustment feature. At a RGB signal The vertical - Hitachi CP-X443 | User Manual - Page 31
OFF 3D‑YCS TURN OFF Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to VIDEO Qlty. VIDEO NR LOW INPUT - Hitachi CP-X443 | User Manual - Page 32
below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] :SELECT - Hitachi CP-X443 | User Manual - Page 33
INPUT Menu (continued) Multifunctional settings Item INFORMATION Description Selecting this item displays a dialog titled "INPUT INFORMATION". It shows the information about the current input. INPUT-INFORMATION RGB 1024x768 @60.0 FRAME LOCK INPUT-INFORMATION S-VIDEO SECAM AUTO INPUT- - Hitachi CP-X443 | User Manual - Page 34
below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] :SELECT - Hitachi CP-X443 | User Manual - Page 35
below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] :SELECT - Hitachi CP-X443 | User Manual - Page 36
control when the picture is display. The picture will freeze and the frame for capturing appears. To stop performing, press the RESET or ESC button on the remote control. 2. Using the buttons adjust the frame position. Please move the frame to the position of the picture which you want to use - Hitachi CP-X443 | User Manual - Page 37
SCREEN Menu (continued) Multifunctional settings Item MESSAGE Description Using the buttons ▲/▼ turns on/off the message function. TURN ON TURN OFF When the TURN ON is selected, the following message function works. "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED" "SYNC - Hitachi CP-X443 | User Manual - Page 38
projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress, except for the items LAMP TIME and FILTER 0 INPUT LAMP TIME 0 SETUP FILTER TIME 0 SCREEN SERVICE OPTION NETWORK EASY - Hitachi CP-X443 | User Manual - Page 39
the remote control or the button ► of the projector for about 3 seconds displays a dialog. To reset the lamp time, select the RESET using the button ▲. RESET CANCEL • Please reset the lamp time only when you have replaced the lamp, for correct messages about the lamp. • About the lamp replacement - Hitachi CP-X443 | User Manual - Page 40
projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. Make your Network settings by manual your network doesn't support the DHCP function, select the TURN OFF. Enter the IP address of the projector using the buttons. - Hitachi CP-X443 | User Manual - Page 41
address even if your network can support the DHCP function Please set the IP address, the subnet mask, the default gateway and the DHCP using the NETWORK menu. At first, set the DHCP function to TURN OFF. It is also possible to configure the projector's network settings using a Web browser (Internet - Hitachi CP-X443 | User Manual - Page 42
Multifunctional settings NETWORK Menu (continued) Information 1) Allows you to confirm the current network settings of the projector. 2) Click on "return to top page" to return to Screen 2. Screen 3 IP Configuration Allows you to configure the IP address, subnet mask and default - Hitachi CP-X443 | User Manual - Page 43
setting, click on "Reboot" in Screen 2 to have the settings take effect. 5. Close the Web browser to end the configuration session. NOTE • If the Projector Network Configuration dialog is accessed by more than one computer at the same time, the last computer to login retains the authority to modify - Hitachi CP-X443 | User Manual - Page 44
there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • If the indicators or a message prompts you to replace the lamp (see the section - Hitachi CP-X443 | User Manual - Page 45
least 45 minutes. 2. To prepare a new lamp, contact your dealer and tell the lamp type number = DT00691. If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. Lamp cover In the case of replacement by yourself, 3. After making sure that - Hitachi CP-X443 | User Manual - Page 46
will come even with the replacement lamp for this projector. 7. Position the cleaned projector on, and reset the filter time using the FILTER TIME function of OPTION menu (39). NOTE • Incorrectly resetting of the filter timer (resetting without replacement, or neglect of resetting after replacement - Hitachi CP-X443 | User Manual - Page 47
Do not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the - Hitachi CP-X443 | User Manual - Page 48
Troubleshooting Troubleshooting Related service company. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on. Message Description CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. The time the lamp - Hitachi CP-X443 | User Manual - Page 49
, please set the HIGH at the FAN SPEED of the item SERVICE of the OPTION menu. A note of precaution when cleaning the air Filter" section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer(39). NOTE • A lamp has a finite product life. Lamps - Hitachi CP-X443 | User Manual - Page 50
the instructions within the table. If the same indication is displayed after the treatment, or if an indication other than the following is displayed, please contact your dealer or service company. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is - Hitachi CP-X443 | User Manual - Page 51
Troubleshooting Regarding the indicator lamps (continued) POWER LAMP item SERVICE of Filter". After cleaning or changed the air filter, please be sure to reset lamps may also be turned off. In such a case, press the "" (OFF) side of the power switch, and wait at least 45 minutes. After the projector - Hitachi CP-X443 | User Manual - Page 52
, contact your dealer or service company. 1. Before requesting repair, please check in accordance with the following chart. This operation sometimes resolves your problem. If the situation cannot be corrected, 2. The projector's microprocessor may need to be reset. Please push the Restart switch - Hitachi CP-X443 | User Manual - Page 53
Troubleshooting level using the menu function 24, 26 or the remote control. The computer cannot detect the projector as a plug and play monitor. Make sure that the SETUP menu. 24, 34 The lamp is approaching the end of its product lifetime. Replace the lamp. 44, 45 Pictures appear blurry. - Hitachi CP-X443 | User Manual - Page 54
Warranty And After-Service Warranty and after-service If a problem occurs with the equipment, first refer to the "Troubleshooting" and run through the suggested checks. If this does not resolve the problem, please contact your dealer or the service company. They will tell you what warranty condition - Hitachi CP-X443 | User Manual - Page 55
Specifications (continued) Specifications NN NN NN NN 55
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
 |
 |
1
Projector
CP-X443
User Manual – Operating Guide
Thank you for purchasing this projector.
WARNING
►
Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
This symbol indicates information that , if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION
This symbol indicates information that , if ignored, could result
possibly in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
Trademark acknowledgment
• VGA and XGA are registered trademarks of the International Business Machines
Corporation.
• Apple and Mac are registered trademarks of the Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of the Microsoft Corporation.
• Internet Explorer is a trademark of the Microsoft Corporation.
• Netscape is a registered trademark of the Netscape Communications Corporation.
All other trademarks are the property of their respective owners.