Hitachi CPAW250 Technical Manual
Hitachi CPAW250 Manual
 |
View all Hitachi CPAW250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CPAW250 manual content summary:
- Hitachi CPAW250 | Technical Manual - Page 1
Projector CP-AW250N User's Manual (detailed) (Type nos. CP-AW250N, CP-AW250NM) Operating Guide - Technical before connecting this projector to a PC. • Some PCs projector can display signals with resolution up to UXGA (1600x1200), the signal will be converted to the projector projector - Hitachi CPAW250 | Technical Manual - Page 2
, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Data H. Sync. Active video (C) Sync (A) Data V. Sync. Active video (c) Sync (a) Resolution (H x V) 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 - Hitachi CPAW250 | Technical Manual - Page 3
as the input ports of the projector are recessed. ►Only the signal Signal 10 Ground 11 (No connection) 12 A : SDA (DDC data) B , C : (No connection) 13 H. sync / Composite Cb/Pb : Component video Cb/Pb, 0.7±0.1 Vp-p, 75 Ω terminator System:480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50 - Hitachi CPAW250 | Technical Manual - Page 4
COMPUTER IN1 CONTROL MONITOR OUT MIC AUDIO IN1 AUDIO IN3 AUDIO OUT S-VIDEO D AUDIO IN2 E VIDEO D S-VIDEO Mini DIN 4pin jack 43 21 • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL(60Hz) Pin Signal 1 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator Color signal 0.300Vp-p (PAL - Hitachi CPAW250 | Technical Manual - Page 5
Connection to the ports (continued) USB TYPE A DC5V 0.5A USB TYPE B HDMI COMPUTER IN2 COMPUTER IN1 CONTROL F MONITOR OUT MMIC G AUDIO IN1 I AUDIO IN3 K AUDIO OUT S-VIDEO AUDIO IN2 H JL VIDEO F HDMI • Type :Digital audio/video connector • Audio signal : Linear PCM (Sampling rate; 32/44 - Hitachi CPAW250 | Technical Manual - Page 6
AUDIO OUT S-VIDEO P AUDIO IN2 VIDEO N USB TYPE A USB A type jack Pin Signal 1 +5V 2 - Data 3 + Data 4 Ground O USB TYPE B 43 4321 USB B type jack Pin Signal 12 1 +5V 2 - Data 3 + Data 4 Ground P CONTROL D-sub 9pin plug • About the details of RS-232C communication, please refer - Hitachi CPAW250 | Technical Manual - Page 7
VIDEO OUT AUDIO IN2 VIDEO VCR/DVD/Blu-ray Disc player To input component video signal to the COMPUTER IN1 or IN2 port of the projector, use a RCA to D-sub cable or adapter. For about the pin description of the required cable or adapter, refer to the descriptions about COMPUTER IN1 - Hitachi CPAW250 | Technical Manual - Page 8
in figure 3. Turn the computer on, and after the computer has started up turn the projector on. 4. Set the COMMUNICATION TYPE to OFF. (&OPTION menu - SERVICE COMMUNICATION in the User's Manual - Operating Guide) RS-232C CONTROL RS-232C Cable (cross) RS-232C port of the computer CONTROL port - Hitachi CPAW250 | Technical Manual - Page 9
Data code Packet size LH LH CRC flag LH Action LH Type LH Setting code LH Change setting to desired value [(cL)(cH)] by [(eL)(eH)]. (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) Read projector 00h (bL) (bH) 00h 00h [Header code] [Packet] [Data size] Set [BEh, EFh, 03h, 06h, 00h] to byte - Hitachi CPAW250 | Technical Manual - Page 10
and the setting status of the projector. (4) Data reply : 1Dh + xxxxh When the projector receives the GET command correctly, the projector returns the responce code and 2 bytes of data. NOTE • For connecting the projector to your devices, please read the manual for each devices, and connect them - Hitachi CPAW250 | Technical Manual - Page 11
. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&17). Connection 1. Turn off the projector and the computer. 2. Connect the projector's LAN port and the computer's LAN port with a LAN cable. Use the cable that fulfills the specification shown in figure - Hitachi CPAW250 | Technical Manual - Page 12
Command Control via the Network (continued) Communicaion Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Configure the following items form a web browser when command control is used. Port Settings Network Control Port1 (Port: 23) Port open Authentication - Hitachi CPAW250 | Technical Manual - Page 13
to the checksum. [Connection ID] Random value from 0 to 255 (This value is attached to the reply data). NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data. • Provide an interval of at least 40ms between the response code and any other code. • Commands are - Hitachi CPAW250 | Technical Manual - Page 14
reply : 15h + ××h (3) Error reply : 1Ch + 0000h + ××h (4) Data reply : 1Dh + xxxxh + ××h (5) Authentication error reply : 1Fh + 0400h + ××h (6) Projector busy reply: 1Fh + ××××h + ××h When the projector is too busy to receives the command, the projector returns the error code. In such a case - Hitachi CPAW250 | Technical Manual - Page 15
devices that you want to control with a RS-232C cable. 3. Turn the computer on, and after the computer has started up turn the projector on. 4. Set the COMMUNICATION TYPE to NETWORK BRIDGE. (&OPTION menu SERVICE - COMMUNICATION in the User's Manual - Operating Guide) LAN LAN CONTROL RS-232C 15 - Hitachi CPAW250 | Technical Manual - Page 16
SERVICE - COMMUNICATION menu. (&OPTION menu - SERVICE - COMMUNICATION in the User's Manual - Operating Guide) Item BAUD RATE Data the projector to your devices, please read the manual for each devices, and connect them correctly with suitable cables. • Turn off (the power of ) both the projector - Hitachi CPAW250 | Technical Manual - Page 17
Communication / Network command table Names Operation Type Header CRC Command Data Action Type Setting code Set Turn off Turn on BE EF Status Get 00 00 01 00 02 00 03 00 [Normal] [Cover error] [Fan error] [Lamp error] 04 00 05 00 07 00 08 00 0C 00 [Temp error] [Air flow error] - Hitachi CPAW250 | Technical Manual - Page 18
4C FE 2A FE FB FF 1C C2 38 FF 5E FF 8F FE 68 C3 C4 FE A2 FE 73 FF 94 C2 Command Data Action Type Setting code 06 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 - Hitachi CPAW250 | Technical Manual - Page 19
Execute Header BE EF 03 BE EF 03 BE EF 03 06 00 06 00 06 00 CRC 80 FE E6 FE 37 FF Command Data Action Type Setting code 02 00 04 00 05 00 96 30 96 30 96 30 00 00 00 00 00 00 BE EF 03 - Hitachi CPAW250 | Technical Manual - Page 20
CE D6 3E D6 5E DD AD D0 91 70 F7 70 26 71 EC D9 0D 83 6B 83 BA 82 E0 D2 Command Data Action Type Setting code 02 00 04 00 05 00 B7 30 B7 30 B7 30 00 00 00 00 00 00 06 00 4C - Hitachi CPAW250 | Technical Manual - Page 21
A2 70 C2 74 52 75 52 70 62 77 C2 71 32 74 31 76 BA 77 2A 76 DA 76 89 77 Command Data Action Type Setting code 02 00 04 00 05 00 01 21 01 21 01 21 00 00 00 00 00 00 06 00 03 - Hitachi CPAW250 | Technical Manual - Page 22
E5 D4 B9 D3 DF D3 0E D2 08 D0 E9 D0 8F D0 5E D1 98 D8 FE 88 6E 89 CD 88 Command Data Action Type Setting code 01 00 01 00 01 00 02 00 01 00 01 00 02 00 01 00 01 00 02 00 01 - Hitachi CPAW250 | Technical Manual - Page 23
9B 97 4A 96 01 96 67 96 B6 97 45 96 23 96 F2 97 3D 96 FB 27 6B 26 C8 27 Command Data Action Type Setting code 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 - Hitachi CPAW250 | Technical Manual - Page 24
9E B6 5D F7 2A F7 EA F5 DA B6 19 F7 CD CC AB CC 7A CD FD CD 9B CD 4A CC Command Data Action Type Setting code 01 00 01 00 02 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 02 - Hitachi CPAW250 | Technical Manual - Page 25
CE DC FD DC DA DF 4A DE BA DE 2A DF E9 DF 76 DD E6 DC 16 DC 86 DD 45 DD Command Data Action Type Setting code 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 - Hitachi CPAW250 | Technical Manual - Page 26
06 00 F7 D6 SUOMI BE EF 03 06 00 67 D7 NOTE) Not all of the languages in this table are supported. (continued on next page) 26 Command Data Action Type Setting code 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 - Hitachi CPAW250 | Technical Manual - Page 27
DA Get BE EF 03 06 00 C4 D3 NOTE) Not all of the languages in this table are supported. Get BE EF 03 06 00 04 D7 Increment BE EF 03 06 00 62 D7 Decrement BE D2 9B D3 38 D2 3B EF AB EE 08 EF 8F D6 1F D7 BC D6 Command Data Action Type Setting code 01 00 01 00 01 00 01 00 01 00 01 00 01 00 - Hitachi CPAW250 | Technical Manual - Page 28
- Set CHANNEL AUTO SEARCH Set DIRECT Set POWER ON AUTO POWER OFF USB TYPE B Set LAMP TIME LAMP TIME Reset FILTER TIME FILTER TIME Reset TEST PATTERN DOT-LINE1 DOT-LINE2 DOT-LINE3 DOT-LINE4 22 CC 23 C2 FF 58 DC C2 F0 98 C6 Command Data Action Type Setting code 01 00 01 00 01 00 01 00 - Hitachi CPAW250 | Technical Manual - Page 29
66 3E 56 3C F6 3F C6 3D 56 39 36 38 06 3A 96 3B 66 3B 66 25 F6 24 F5 32 Command Data Action Type Setting code 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 - Hitachi CPAW250 | Technical Manual - Page 30
93 3D 30 3C 3A C3 AA C2 5A C2 CA C3 FA C1 09 C3 71 C3 35 C3 C9 C2 BD C3 Command Data Action Type Setting code 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 02 00 02 00 04 - Hitachi CPAW250 | Technical Manual - Page 31
PJLink command PJLink command Commands POWR POWR ? INPT INPT ? AVMT AVMT ? Control Description Power Contorol Power Status inquiry Input Source selection Input Source inquiry AV Mute AV Mute inquiry Parameter or Response 0 = Standby 1 = Power On 0 = Standby 1 = Power On 2 = Cool Down 11 = - Hitachi CPAW250 | Technical Manual - Page 32
(digits 1 to 5): Lamp Time 2nd number : 0 = Lamp off, 1 = Lamp on 11 12 22 23 31 41 51 52 Responds with the name set in "PROJECTOR NAME" of "NETWORK" HITACHI CP-AW250N Responds with the factory Japan Business Machine and Information System Industries Association. URL: http://pjlink.jbmia.or.jp/ 32
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
1
NOTE
• Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these modes
will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA (1600x1200),
the signal will be converted to the projector’s panel resolution before being displayed.
The best display performance will be achieved if the resolutions of the input signal
and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite
sync or a sync on G.
• The HDMI
TM
input does not support the signals marked with *.
Projector
CP-AW250N
User's Manual (detailed)
Operating Guide – Technical
Resolution (H x V)
H. frequency (kHz)
V. frequency (Hz)
Rating
Signal mode
720 x 400
37.9
85.0
VESA
TEXT
640 x 480
31.5
59.9
VESA
VGA (60Hz)
640 x 480
37.9
72.8
VESA
VGA (72Hz)
640 x 480
37.5
75.0
VESA
VGA (75Hz)
640 x 480
43.3
85.0
VESA
VGA (85Hz)
800 x 600
35.2
56.3
VESA
SVGA (56Hz)
800 x 600
37.9
60.3
VESA
SVGA (60Hz)
800 x 600
48.1
72.2
VESA
SVGA (72Hz)
800 x 600
46.9
75.0
VESA
SVGA (75Hz)
800 x 600
53.7
85.1
VESA
SVGA (85Hz)
832 x 624
49.7
74.5
Mac 16” mode
1024 x 768
48.4
60.0
VESA
XGA (60Hz)
1024 x 768
56.5
70.1
VESA
XGA (70Hz)
1024 x 768
60.0
75.0
VESA
XGA (75Hz)
1024 x 768
68.7
85.0
VESA
XGA (85Hz)
1152 x 864
67.5
75.0
VESA
1152 x 864 (75Hz)
1280 x 768
47.7
60.0
VESA
W-XGA (60Hz)
1280 x 800
49.7
60.0
VESA
1280 x 800 (60Hz)
1280 x 960
60.0
60.0
VESA
1280 x 960 (60Hz)
1280 x 1024
64.0
60.0
VESA
SXGA (60Hz)
1280 x 1024
80.0
75.0
VESA
SXGA (75Hz)
*1280 x 1024
91.1
85.0
VESA
SXGA (85Hz)
1440 x 900
55.9
59.9
VESA
WXGA+ (60Hz)
1680 x 1050
65.3
60.0
VESA
WSXGA+ (60Hz)
*1600 x 1200
75.0
60.0
VESA
UXGA (60Hz)
Example of computer signal
(Type nos. CP-AW250N, CP-AW250NM)