Hitachi CPX417 User Manual
Hitachi CPX417 - XGA LCD Projector Manual
 |
UPC - 050585151321
View all Hitachi CPX417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CPX417 manual content summary:
- Hitachi CPX417 | User Manual - Page 1
Projector CP-X417 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this - Hitachi CPX417 | User Manual - Page 2
the lamp 64 Adjusting the projector's elevator . . . 19 Cleaning and replacing the air filter. . . 66 Adjusting the zoom and focus. . . . . . 19 Replacing the internal clock battery. . . 68 Using the automatic adjustment feature. . . . 20 Other care 69 Adjusting the position 20 Troubleshooting - Hitachi CPX417 | User Manual - Page 3
via LAN connection. ü U sing the designated wireless network card (optional) realizes wireless LAN connection. Preparations Contents of package Please see the "Contents of package" section in the User's Manual (concise) which is a book. Your projector should come with the items shown there. Contact - Hitachi CPX417 | User Manual - Page 4
Part names Projector (1) Lamp cover (&64). The lamp unit is inside. (2) Focus ring (&19) (3) Zoom ring (&19) (4) Control panel (&5) (5) Elevator buttons (x 2) (&19) (6) Elevator feet (x 2) (&19) (7) Remote sensor (&14) (8) Lens (&16, 69) (9) Lens cover (&3) (10) Intake vents (11) Filter cover (&66 - Hitachi CPX417 | User Manual - Page 5
LAMP indicator VIDEO port (&9) (13) AUDIO IN3 (L,R) ports (&9) (14) LAN port (&9) (15) USB STORAGE port (&9) (16) SD card slot (&9) (17) HDMI port (&9) (16) (4) (5) (15) (14) (6) (17) (7) SD CARD (8) (9) (10) (11) (13) (12) (2) (1) (3) CAUTION ►Use the shutdown switch only when the projector - Hitachi CPX417 | User Manual - Page 6
24) (24) ESC button (&15, 23) (25) RESET button (&15, 23, 24) (26) Battery cover (&14) (2) (1) (5) (10) (8) (9) (11) (16) (17) (20) (22) (24) VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 POSITION MENU ESC - Hitachi CPX417 | User Manual - Page 7
c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. a Screen size (diagonal) inch - Hitachi CPX417 | User Manual - Page 8
into or stick to the vents on the bottom of the projector. This projector has some intake vents also on the bottom. ►Do not place the projector anyplace where it may get wet. Getting the projector wet or inserting liquid into the projector could cause fire, electric shock and/or malfunction of the - Hitachi CPX417 | User Manual - Page 9
Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the - Hitachi CPX417 | User Manual - Page 10
or other abnormalities that may result in malfunction or damage to the device and the projector. ►Use appropriate accessory or designated cables. Ask your dealer about nonaccessory cables which may be required a specific length or a ferrite core by the regulations. For cables with a core only at one - Hitachi CPX417 | User Manual - Page 11
standard drivers in your PC as this projector is a Plug-and-Play monitor. NOTE for HDMI • The HDMI supports the following signals. -Video signal : 525i(480i),525p(480p),625i(576i),750p(720p),1125i(1080i),1125p(1080p) -PC signals : See User's Manual (detailed) Technical -Audio signal : Format Linear - Hitachi CPX417 | User Manual - Page 12
menu under the MIU menu for SD Storage card only. 2. Turn the projector off and unplug the power code from the projector for the wireless network card only. 3. Remove the SD card slot cover. After taking the SD card away, replace the SD card slot cover. WARNING ►Do not disassemble or modify the - Hitachi CPX417 | User Manual - Page 13
chain or wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. Anti-theft chain or wire Security slot Security bar WARNING ►Do not use - Hitachi CPX417 | User Manual - Page 14
to replace the HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. 3. Replace out the leakage and then replace a battery. If the projector's remote sensor. This projector signals to the projector (Class 1 signal to the projector. • The - Hitachi CPX417 | User Manual - Page 15
and Mode 2:HIGH. If the remote control VIDEO COMPUTER SEARCH does not function properly, attempt the REMOTE FREQ. in the SERVICE item of the OPTION menu (46) of the projector to be controlled should be set when the projector is working properly. This function is not available while the lamp is - Hitachi CPX417 | User Manual - Page 16
"Selecting an input signal"(17). STANDBY/ON button POWER indicator VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME 2. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. - Hitachi CPX417 | User Manual - Page 17
menu and the input signal from the port supports the C.C. feature (63) MUTE button VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME 2 HDMI MIU VIDEO S-VIDEO COMPONENT (Y, Cb/Pb, Cr/Pr) ● While TURN ON is selected for AUTO SEARCH item in OPTION menu (42), the projector will keep - Hitachi CPX417 | User Manual - Page 18
MENU will keep checking every port sequentially till an input signal is detected (42). If VIDEO button is pushed when COMPUTER IN1, COMPUTER IN2, HDMI or MIU ENTER port is selected, the projector will check COMPONENT port first. ESC RESET Searching an input signal SEARCH button 1. Press - Hitachi CPX417 | User Manual - Page 19
the elevator feet. 4. After making sure that the elevator feet are locked, put the projector gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet. To loose an elevator foot, push the elevator button on the - Hitachi CPX417 | User Manual - Page 20
The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (45). VIDEO COMPUTER SEARCH ASPECT AUTO BLANK Adjusting the position 1. Press POSITION button on the remote control when no menu is indicated. The - Hitachi CPX417 | User Manual - Page 21
1 2 2. Use the ▲/▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to perform the following. POSITION projector is started, the picture will be zoomed twice. The indication will disappear in several seconds with no operation. MAGNIFY ON/OFF button VIDEO COMPUTER - Hitachi CPX417 | User Manual - Page 22
of STANDBY/ON, SEARCH, COMPUTER, VIDEO, BLANK, AUTO, VOLUME, MUTE, KEYSTONE, MENU, MAGNIFY and MY BUTTON1/2 (except MY MEMORY or PICTURE MODE is assigned to) (44) is pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in - Hitachi CPX417 | User Manual - Page 23
MENU ENTER ESC MY1BUTTON 2 KEYSTONE MUTE SEARCH AUTO PAGE DOWN PAGE UP COMPUTER HOME END VIDEO ASPECT ON MAGNIFY FREEZE OFF POSITION 1. Press the MENU button on the remote control or the projector. The Advanced Menu or EASY MENU, which has priority just after powered on will appear - Hitachi CPX417 | User Manual - Page 24
Operating Using the menu function (continued) In the Advanced Menu 2. Use the ▲/▼ cursor buttons to select a menu. If you want to change it to the EASY MENU, select EASY MENU. Then press the ► cursor button, or ENTER button to select an item. The lower layer menu of the selected item will appear. - Hitachi CPX417 | User Manual - Page 25
EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. EASY MENU Item ASPECT AUTO KEYSTONE EXECUTE KEYSTONE KEYSTONE Description Using the ◄/► buttons switches the mode for - Hitachi CPX417 | User Manual - Page 26
the ◄/► buttons switches the mode for mirror status. See MIRROR item in SETUP menu (36). Performing this item resets all of EASY MENU items except FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting RESET using the ▲ button performs resetting. The usage time of the air - Hitachi CPX417 | User Manual - Page 27
PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. PICTURE menu Item BRIGHTNESS Description Using the - Hitachi CPX417 | User Manual - Page 28
may appear. COLOR Using the ▲/▼ buttons adjusts the strength of whole color. Strong ó Weak • This item can be selected only for a video signal, s-video, component video signal or HDMI signal. TINT Using the ▲/▼ buttons adjusts the tint. Greenish ó Reddish • This item can be selected only for - Hitachi CPX417 | User Manual - Page 29
ó Weak • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. This projector has 4 memories for adjustment data (for all the items of PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button - Hitachi CPX417 | User Manual - Page 30
buttons adjusts the over-scan ratio. Large (It reduces picture) ó Small (It magnifies picture) • This item can be selected only for a video, s-vide, component video and HDMI signal. • When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case - Hitachi CPX417 | User Manual - Page 31
signals from the HDMI port. • Over on a video signal, s-video signal, or component video signal, a MIU signal or component video signal. (except 525 (408i video signal and s-video signal The video for the VIDEO FORMAT item component video signal function is performed for a video signal, a certain extra - Hitachi CPX417 | User Manual - Page 32
interlaced signal at the VIDEO or S-VIDEO input, and for 525i (480i), 625i (576i) or 1125i (1080i) signal at the COMPONENT VIDEO or HDMI input. • When , Cr/ Pr) and VIDEO ports will function as a SCART RGB port. A SCART cable is required for a SCART RGB input to the projector. For your reference, see - Hitachi CPX417 | User Manual - Page 33
VIDEO port. • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an irregular picture, lack of color), please select the mode according to the input signal. Using the ▲/▼ cursor buttons changes the HDMI - Hitachi CPX417 | User Manual - Page 34
INPUT menu INPUT menu (continued) Item RESOLUTION Description The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the - Hitachi CPX417 | User Manual - Page 35
to the (forward/backward) setup angle by itself. This function will be executed only once when selected in the menu. When the slant of the projector is changed, execute this function again. • The adjustable range for correction will vary among inputs. For some input, this function may not work well - Hitachi CPX417 | User Manual - Page 36
V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (51) will be displayed when projector is restarted after the power switch is turned off. VOLUME Using the ▲/▼ buttons adjusts the volume. High ó Low SPEAKER Using the ▲/▼ buttons - Hitachi CPX417 | User Manual - Page 37
as a display source. • When is selected to VIDEO or S-VIDEO port, the C.C.(Closed Caption) is automatically activated, if the C.C. is set to AUTO in the DISPLAY menu of the C.C. menu and the signal from the input port supports the C.C. feature. (63) The HDMI AUDIO is set to 1 as default. In case - Hitachi CPX417 | User Manual - Page 38
SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description LANGUAGE Using the ▲/▼ - Hitachi CPX417 | User Manual - Page 39
SCREEN menu (continued) SCREEN menu Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen - Hitachi CPX417 | User Manual - Page 40
finished." If the registration failed, the following message is displayed: "A capturing error has occurred. Please try again." • This item cannot be selected a HDMI signal. • This function cannot be selected when the TURN ON is selected to the MyScreen Lock item (below). • This function cannot be - Hitachi CPX417 | User Manual - Page 41
while the TURN OFF is selected, the picture on screen is frozen without any messages, which is not a malfunction. (22) Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu - Hitachi CPX417 | User Manual - Page 42
or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item AUTO an input is found, the projector will stop searching and display the image. COMPUTER IN1 COMPUTER IN2 HDMI VIDEO S-VIDEO COMPONENT MIU AUTO - Hitachi CPX417 | User Manual - Page 43
time, the projector lamp will be turned off. If one of the projector's buttons or the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. • For the lamp replacement, see the section "Lamp" (64). FILTER TIME The filter time is the usage time of the air filter - Hitachi CPX417 | User Manual - Page 44
HDMI: Sets port to HDMI. • MIU: Sets port to MIU. • COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr) • S-VIDEO: Sets port to S-VIDEO. • VIDEO: Sets port to VIDEO (25). • FILTER RESET: Displays the filter time reset confirmation . Selecting this item displays the SERVICE menu. Select an item using - Hitachi CPX417 | User Manual - Page 45
projector, environment around the projector, etc., the automatic adjustment may not work correctly. In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually. SERVICE REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK" will appear after the timer - Hitachi CPX417 | User Manual - Page 46
Item SERVICE (continued) Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, SECURITY and MIU settings are not reset. RESET ï CANCEL - Hitachi CPX417 | User Manual - Page 47
OPTION menu (continued) OPTION menu Item SECURITY Description This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons - Hitachi CPX417 | User Manual - Page 48
for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10-digit Inquiring Code will be displayed. • If -digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 2. Using the MyScreen PASSWORD Function The - Hitachi CPX417 | User Manual - Page 49
dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 3.1 Registering the PIN Code 3.1-1 Use - Hitachi CPX417 | User Manual - Page 50
projector is restarted after AC power The projector can projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector function will activate only when the projector is started after AC power is projector will turn off. 3.3-2 Contact your - Hitachi CPX417 | User Manual - Page 51
menu to display the input signal. If the Transition Detector alarm is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after turning off the AC power. 4.2 Setting the Transition Detector PASSWORD 4.2-1 Use the ▲/▼ buttons on - Hitachi CPX417 | User Manual - Page 52
-digit Inquiring Code will be displayed inside the box. 4.4-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 52 - Hitachi CPX417 | User Manual - Page 53
. Item Description LIVE MODE Selecting this item sets the projector onto the "Live Mode". On the "Live Mode", the projector displays the images from the PC via Network, supported by "MIU Live Viewer". ( Live Mode of the User's Manual - Network Guide) In the Live Mode, the message "Waiting for - Hitachi CPX417 | User Manual - Page 54
to display an image sent by other PC, execute the QUIT PRESENTER MODE function. • See the User's Manual - Network Guide for details. (84) LIVE MODE SETTING (continued) MULTI PC MODE The projector supports the Single PC mode that displays an image on full screen sent by 1 PC, and the Multi - Hitachi CPX417 | User Manual - Page 55
in the Single PC mode connected to the projector, the DISPLAY USER NAME box is shown as right. MULTI PC mode The Display User Names will be shown in the DISPLAY USER NAME box. • See the User's Manual - Network Guide for details of the Display User Name setting. (22) Selecting this item displays - Hitachi CPX417 | User Manual - Page 56
appear. • Also these items can be set with Web Remote Control (Refer to Network Guide) except REMOVE MEDIA. Selecting this item displays the MIU SETUP menu. Use the ▲/▼ buttons be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is "ON". (continued on - Hitachi CPX417 | User Manual - Page 57
Use the buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. ( Date/Time Settings of the User's Manual - Network Guide) (continued on next page) 57 - Hitachi CPX417 | User Manual - Page 58
the network communication system. Select it according to the setting of your PC. ADHOC INFRASTRUCTURE Use the ▲/▼ buttons to select the channel of the wireless LAN while using it. Select it according to the setting of your PC. The channels 1 to 11 are available. • The available channels would be - Hitachi CPX417 | User Manual - Page 59
mode automatically selects the optimum rate. • Transfer rates may change due to the network situation. Use the ▲/▼ buttons to select the network mode. NETWORK MODE WIRELESS WIRED • The network mode will be initialized whenever the power is turned on with the power switch. • The - Hitachi CPX417 | User Manual - Page 60
ENTER or INPUT button, 1 character or all characters will be erased. The PROJECTOR NAME can be input up to 64. (3) To change an already inserted screen and press the ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and - Hitachi CPX417 | User Manual - Page 61
61) The application software "PJTransfer" is required to store image(s) into the projector. Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT ( e-SHOT (Still Image Transfer) Display of the User' s Manual - Network Guide) and the ► or ENTER button to display the image. • The - Hitachi CPX417 | User Manual - Page 62
PROJECTOR NAME" and "SSID" field until you setup those items. (58, 59, 60) • When the voltage level of the battery for the built in clock decreases, the set time may become incorrect even though accurate date and time are input. Replace the battery suitably. (68) • MAC wireless . SERVICE EXECUTE - Hitachi CPX417 | User Manual - Page 63
portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video source supporting C.C. feature to which is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C. program - Hitachi CPX417 | User Manual - Page 64
out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact to your dealer and tell the lamp type number. Type number : DT00841 Replacing the lamp lamp cover 1. Turn the projector off, and unplug the power cord. Allow the - Hitachi CPX417 | User Manual - Page 65
In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or - Hitachi CPX417 | User Manual - Page 66
, contact to your dealer and tell the air filter type number. Type number : MU04951 When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow - Hitachi CPX417 | User Manual - Page 67
or too soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about - Hitachi CPX417 | User Manual - Page 68
battery. NOTE • The internal clock's time will be reset when the battery is removed. Please reconfigure the time via the menu or a web browser after replacing the battery. ( Date/Time Settings in the User's Manual (detailed) - Network Guide) 68 - Hitachi CPX417 | User Manual - Page 69
. CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard - Hitachi CPX417 | User Manual - Page 70
service company. Otherwise if a problem occurs with the projector the specs for your projector or the signal source specs. CHECK THE FILTER CHECK. the air filter referring to the "Air filter" section of this manual. FILTER MAINTENANCE IS ESSENTIAL After you have cleaned or changed the air filter - Hitachi CPX417 | User Manual - Page 71
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state. - Hitachi CPX417 | User Manual - Page 72
1 Power ON schedule is saved to the projector. Please refer to "Schedule Settings" section of User's Manual-Network Guide. NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such - Hitachi CPX417 | User Manual - Page 73
Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the the power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either of these has not been properly - Hitachi CPX417 | User Manual - Page 74
Troubleshooting Phenomena that may be easy to be mistaken for machine defects ( audio on your HDMI equipment is not set to Linear PCM. The HDMI input on this projector supports Linear PCM audio only. Check the audio setting on your HDMI equipment. 36, 37 11 The audio on the HDMI input is muted. - Hitachi CPX417 | User Manual - Page 75
projector may not work properly. Your HDMI equipment and the projector are not harmonized. Turn off the both equipment, and turn on them again The signal format on the HDMI is not supported. Check the video setting on your HDMI lamp is approaching the end of its product lifetime. Replace the lamp. - Hitachi CPX417 | User Manual - Page 76
Lamp Audio output Power supply Power consumption Temperature range Size Weight (mass) Ports Optional parts Specifications Liquid crystal projector x1 S-VIDEO........... mini DIN 4 pin x1 CONTROL D-sub 9 pin x1 VIDEO RCA x1 LAN RJ45 x1 Lamp: DT00841 Air filter: MU04951 Wireless network - Hitachi CPX417 | User Manual - Page 77
Specifications (continued) Specifications 117 129 270 340 [unit: mm] 77
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
 |
 |
±
Projector
CP-X417
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
All other trademarks are the properties of their respective owners.
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.