Hitachi CPX417 Network Guide

Hitachi CPX417 - XGA LCD Projector Manual

Get Hitachi CPX417 - XGA LCD Projector PDF manuals and user guides
UPC - 050585151321
View all Hitachi CPX417 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CPX417 manual content summary:

  • Hitachi CPX417 | Network Guide - Page 1
    Projector CP-X417 User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. ü L ive Mode This projector can project your PC images on screen through wireless or wired network, which can erase
  • Hitachi CPX417 | Network Guide - Page 2
    Manual network connection setting - Wireless LAN -. . 16 2.4.1 Preparation for wireless LAN connection. . . 16 2.4.2 Wireless LAN connection set up. . . 17 4.1 Configuring and controlling the projector 114 5.7 Playlist 115 6. Troubleshooting 116 7. Specifications 118 3.6.3 Setting the Live
  • Hitachi CPX417 | Network Guide - Page 3
    , REMOVE SD CARD or REMOVE USB using the PCLESS PRESENTATION menu under the MIU Menu. (MIU Menu in the User's Manual (detailed) - Operating Guide) CAUTION nThe accompanying IEEE802.11b/g wireless network card uses the 2.4GHz radio frequency band. You do not need a radio license to use this card
  • Hitachi CPX417 | Network Guide - Page 4
    Caution 0560 ! The manufacturer (Gemtek) hereby declare that this equipment (the wireless network card), model SD-Link11g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 
  • Hitachi CPX417 | Network Guide - Page 5
    "Live Viewer 3" captures PC screen image and sends to the projector through wired LAN or wireless LAN connection. (&20) Live Viewer 3 Fig. 1.1.a "Live Viewer 3" outlines (through wireless LAN connection) Fig. 1.1.b "Live Viewer 3" Main menu One projector can be connected with up to 4 PCs using "Live
  • Hitachi CPX417 | Network Guide - Page 6
    a code that includes SSID and IP address and other information that are required for the network connection. The Passcode is given on screen by the projector, and then all you need to do is to input the code to the "Live Viewer 3" in your PC. (&26) Fig.1.2 PASSCODE on the
  • Hitachi CPX417 | Network Guide - Page 7
    Configuring and controlling via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected the menus to configure the network settings, monitor the projector and so on. The Web Remote Control, one of the menus of web browser, allows you
  • Hitachi CPX417 | Network Guide - Page 8
    acknowledges as multiple devices connected). • The supported formats are FAT 12, FAT 16(FAT) and FAT 32. NTFS is not supported. • USB hub is not supported. Fig. 1.4 "PC-LESS Presentation" outlines "PC-LESS Presentation" can be controlled via keypad on the projector or remote control (&101). 
  • Hitachi CPX417 | Network Guide - Page 9
    There are several naming limitations for the folders and files. (1) Alphanumeric and Japanese characters are supported if the language setting is Japanese. (2) Alphanumeric and Latin-1 characters are supported if the language setting is NOT Japanese. • The files may not be able to access depending
  • Hitachi CPX417 | Network Guide - Page 10
    , the projector may not be able to communicate properly with your PC, even if the PC you are using is equipped with built-in wireless LAN function. To eliminate communication problems, please use a Wi-Fi certified wireless network device. 2.2 Quick connection The "Live Viewer 3" supports very quick
  • Hitachi CPX417 | Network Guide - Page 11
    LAN - If you don't use the "Live Viewer 3", you need to set up your network connection manually. This section explains how to set it up manually. 2.3.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator
  • Hitachi CPX417 | Network Guide - Page 12
    2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 5) Open "Local Area Connection Properties" window you use for network device. (Fig. 2.3.2.c) Fig. 2.3.2.c "Local Area Connection Properties" window 6) Set
  • Hitachi CPX417 | Network Guide - Page 13
    network connection setting - Wired LAN - (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector's one. And the entire IP address in the PC should not be overlapped with other equipments in the same
  • Hitachi CPX417 | Network Guide - Page 14
    2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 2.3.3 "Internet Option" setting 1) Click "Internet Options" in "Network and Internet Connections" window (Fig. 2.3.3.a) to open "Internet Properties" window. (Fig.2.3.3.b)
  • Hitachi CPX417 | Network Guide - Page 15
    and network setting 2.3 Manual network connection setting - Wired LAN - (continued) Fig. 2.3.3.c "Local Area Network (LAN) Settings" window 3) Uncheck all boxes in "Local Area Network (LAN) Settings" window. (Fig. 2.3.3.c) 2.3.4 Check connection Check PC and projector are connected properly here
  • Hitachi CPX417 | Network Guide - Page 16
    both of Ad-Hoc and Infrastructure modes, using the designated wireless network card (option) on the projector. This section is intended to explain how to set up wireless LAN connection manually. 2.4.1 Preparation for wireless LAN connection Fig. 2.4.1.a Without an access point communication (Ad-Hoc
  • Hitachi CPX417 | Network Guide - Page 17
    PC or the menu on the projector. Refer to the item 4.1.3 Network Settings (&69) or & MIU Menu in the User's Manual (detailed) - Operating Guide. 1) Open "Network Connections". (Fig. 2.4.2.a) Fig. 2.4.2.a "Network Connections" 2) Open "Wireless Network Connection Properties". (Fig. 2.4.2.b) Fig
  • Hitachi CPX417 | Network Guide - Page 18
    Equipment connection and network setting 2.4 Manual network connection setting - Wireless LAN - (continued) 3) Set used protocol as "TCP/IP" and open TCP/IP property. Set IP address and other settings as same as wired LAN connection set up. (&12) 4) Open "Wireless Networks" tab. (Fig. 2.4.2.c) Fig
  • Hitachi CPX417 | Network Guide - Page 19
    Equipment connection and network setting 2.4 Manual network connection setting - Wireless LAN - (continued) 7) Set each item as follows. Network name (SSID): wireless Data encryption: not enabled (Default setting is not enabled.) NOTE • If the default setting in the projector is used, set the data
  • Hitachi CPX417 | Network Guide - Page 20
    your requirement. - Passcode connection - Profile data connection - History record connection - My Connection - Manual connection 3) Confirm the connection to your destination (&50) In some case, there are several projectors connected to the same network. Before you send your image, confirm that the
  • Hitachi CPX417 | Network Guide - Page 21
    's image on screen in real time through either wired or wireless LAN. So, no signal cable connection is required. 3.1.1 projector displays images sent by one PC. 2) Multi PC mode The projector screen is divided to 4 zones. The projector displays images in one zone sent by a PC, so that the projector
  • Hitachi CPX417 | Network Guide - Page 22
    (continued) 3.1.2 Presenter mode In the Single PC mode, the projector can be occupied by one PC and can block an access from menu. (&58) 3.1.3 Display User Name The user name can be input in the "Live Viewer 3", which is displayed on screen by operating the menu on the projector. So, it can be found
  • Hitachi CPX417 | Network Guide - Page 23
    maybe limited, please see the instruction manual that is supplied with the latest "Live Viewer 3". • Set your PC's resolution to XGA or less. Refer to the user manual for your PC or Windows. • In some cases, your PC's screen will not be displayed correctly by the projector. If the resolution is
  • Hitachi CPX417 | Network Guide - Page 24
    your CD-ROM drive is not drive E on your PC, you will need to replace E with the correct drive letter assigned to your CD-ROM drive. If the software Location dialog appears. Press [Next]. NOTE • The C:\Program Files\Projector Tools\LiveViewer3 folder will be created and the program will be installed
  • Hitachi CPX417 | Network Guide - Page 25
    the projector, the software will not work properly. Live Viewer Version CP-X267 Models CP-X268A CP-X608 CPX2 2.01 ™ Í Í 2.1x Í ™ ™ 2.20 Í ™ ™ 3.xx Í ™ ™ • "x" in the version means 0 or greater. CP-X308 CP-X417 CP-X807 Í Í Í ™ Please check and get the latest version at Hitachi
  • Hitachi CPX417 | Network Guide - Page 26
    " → "Projector Tools" → "Live Viewer 3" on Windows XP menu. Then, proceed to the item 3.3.2 Selecting the connection mode. (&27) [trouble shooting] n not changed, the projector will display XGA(1024x768) portion from top left corner of your PC screen. • Refer to the user manual for your PC or
  • Hitachi CPX417 | Network Guide - Page 27
    , the wireless LAN adapters in your PC are shown in the list. • If the wired LAN is selected, the wired LAN adapters in your PC are shown. [trouble shooting] n Are you sure that you want to turn on the network adapter? The screen is displayed in the case that the selected network
  • Hitachi CPX417 | Network Guide - Page 28
    • To turn it disabled(Off), click [Yes]. • Not to turn it disabled(Off), click [No], but the projector may not be able to communicate with your PC through the network. • If you put a check mark in the [ installed into you PC, make the firewall function invalid with following the user's manual. 28
  • Hitachi CPX417 | Network Guide - Page 29
    the DHCP off in the projector. • If no profile data is assigned to the My Connection, it can't be used. [trouble shooting] n A network connection could not be established. Windows prevented network configuration changes. You may log in the Windows under User
  • Hitachi CPX417 | Network Guide - Page 30
    3. Using the Live Mode 3.3 Quick connection to the network (continued) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the 3.6 Confirm the
  • Hitachi CPX417 | Network Guide - Page 31
    from the list. • Configure Network Settings Manually Proceed to the item 3.5.3 Configuring manually (&43) If you need to make the setting manually, select [Configure Network Settings Manually]. Select From List Before selecting this item, your PC and the projectors need to be connected to the same
  • Hitachi CPX417 | Network Guide - Page 32
    system meets one of them, set the connection manually. 1) Any encryption code is used. The SSID only. Factory default SSID 1 : wireless Factory default SSID 2 : WLANProjector1 Factory MENU button on the remote control or the buttons on the projector to show the menu on screen. 4) Use the ▲/▼
  • Hitachi CPX417 | Network Guide - Page 33
    to display the INFORMATION. 6) The Passcode is appeared at the top right corner in the INFORMATION window. NOTE • Take the Method 2 , when you use the projector in the LIVE MODE or PC-LESS Presentation mode, or when the MIU is not selected as the input signal. • If no communication between the
  • Hitachi CPX417 | Network Guide - Page 34
    . If the manual setting screen is displayed, please follow the item 3.4.3. [trouble shooting] n Incorrect PassCode. The incorrect Passcode was input. Click [Back] to return to the "Please enter the PassCode" screen. Check the PassCode on the projector screen (32) and enter the code again. 34
  • Hitachi CPX417 | Network Guide - Page 35
    changes. 3. Using the Live Mode You may log in the Windows under User authority. Click [OK], then the "Live Viewer 3" main menu is displayed The reason is that the IP address set in the projector is the global address. Following the instruction by the network administrator, set the IP address and
  • Hitachi CPX417 | Network Guide - Page 36
    main menu to go back to the item 3.3.3 Connecting to the network. (&31) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the 3.6 Confirm the
  • Hitachi CPX417 | Network Guide - Page 37
    are required to input the network setting manually if you use any encryption code or your unique SSID or Subnet mask except Class A/B/C. (32) If you use the wired LAN, go to (40). Wireless LAN The required information depends on how you connect the projector and PC. • Direct connection between the
  • Hitachi CPX417 | Network Guide - Page 38
    (example) Encryption: WEP64bit (example) Encryption key *2 example) 2) The setting on the projector. *3 Enter the following information. Subnet mask *4: 255.255.255.128 (example) 3) Click [Connect]. 4) The wireless connection will be established. Proceed to the item 3.6 Confirm the connection to
  • Hitachi CPX417 | Network Guide - Page 39
    projector connected to an access point by the wireless LAN 1) Enter the following information that is set in the projector. *1 SSID *2: wireless on the projector, refer to the NOTE. (40) *2 If you don't use the factory default SSID, you need to set your SSID by either entering manually or
  • Hitachi CPX417 | Network Guide - Page 40
    appeared. Please set the Subnet mask. NOTE • If you require the network setting information on the projector, take the following procedure to find it out. 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the buttons
  • Hitachi CPX417 | Network Guide - Page 41
    configuration There are 3 options for the manual configuration. • Profile • History • Configure Network Settings Manually 3. Using the Live Mode 3.5.1 Profile connection Selecting a profile data connect the network with the projector. It is required to store the profile data in advance. (60
  • Hitachi CPX417 | Network Guide - Page 42
    3. Using the Live Mode 3.5 Manual configuration (continued) 3.5.2 History connection The "Live Viewer 3" can memory the network settings when connecting to the projector as a history record. After that, selecting a history record can quickly connect the network with the projector. 1) Select [History
  • Hitachi CPX417 | Network Guide - Page 43
    the network connection between the projector and PC is input manually. Select [Configure Network Settings Manually]. 3. Using the Live Mode The information to be input manually is different, depending on how you want to connect the projector and PC. Wireless LAN The required information depends
  • Hitachi CPX417 | Network Guide - Page 44
    3. Using the Live Mode 3.5 Manual configuration (continued) Direct connection between the projector and PC (AdHoc mode) 1) Enter the following information that is set in the projector. *1 SSID: wireless (example) Encryption: WEP64bit (example) Encryption key *2 example) Mode: ADHOC 2) Click [Next].
  • Hitachi CPX417 | Network Guide - Page 45
    3. Using the Live Mode 3.5 Manual configuration (continued) The projector connected to an access point by a LAN cable 1) The that is set in the projector. *3 IP Address : 192.168.1.10 (example) Subnet mask: 255.255.255.0 (example) 4) Click [Connect]. 5) The wireless connection will be established.
  • Hitachi CPX417 | Network Guide - Page 46
    3. Using the Live Mode 3.5 Manual configuration (continued) The projector connected to an access point by the wireless LAN 1) The setting on the access point. *1 Enter the following information. SSID: WirelessAccessPoint (example) Encryption: WEP64bit (example) Encryption key *2 example) Mode:
  • Hitachi CPX417 | Network Guide - Page 47
    Manual configuration (continued) Wired LAN 1) Enter the following information for the projector projector, refer to the NOTE. (40) [trouble shooting] n A network connection could not be established. Windows prevented network configuration changes. You may log in the Windows under User
  • Hitachi CPX417 | Network Guide - Page 48
    3. Using the Live Mode 3.5 Manual configuration (continued) n Automatic connection failed. The reason is that the IP address set in the projector is the global address. Following the instruction by the network administrator, set the IP address and Subnet mask in the "Live Viewer 3". After input
  • Hitachi CPX417 | Network Guide - Page 49
    3. Using the Live Mode 3.5 Manual configuration (continued) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the 3.6 Confirm the connection
  • Hitachi CPX417 | Network Guide - Page 50
    stand-by mode. (The stand-by mode is the condition that the wireless connection is established, but the images are not transmitted.) The transmission can setting to My Connection]. [trouble shooting] n This projector is currently in use (Presenting) by another user. The projector you want to send
  • Hitachi CPX417 | Network Guide - Page 51
    3. Using the Live Mode 3.6 Confirm the connection to your destination (continued) n A Slideshow is currently running on the projector that you are trying to display to. The projector you want to send your images to is in the Slide show mode in the PC-LESS Presentation. • Click [Yes], then the
  • Hitachi CPX417 | Network Guide - Page 52
    , and retry the connection from the item 3.3 Quick connection to the network. (26) [trouble shooting] n The network connection is refused. The Projector has already reached the maximum number of Network Connections. The projector can connect up to 5 PCs at the same time. Click [OK], then the "Live
  • Hitachi CPX417 | Network Guide - Page 53
    LIVE MODE, and push the ► cursor button or ENTER button. (Refer to  MIU Menu in the User's Manual (detailed) - Operating Guide) from MY BUTTON function 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the buttons on
  • Hitachi CPX417 | Network Guide - Page 54
    the settings and operate the functions to send your images to the projector in the Live Mode. 3.7.1 Main menu and Operating buttons 1) Menu menu 2) Operating buttons q Starting Capture button The transmission to the projector is started and the images will be displayed in the Live Mode.
  • Hitachi CPX417 | Network Guide - Page 55
    last image before the button is clicked is remained on screen. You can revise the image data on your PC without showing it on the projector's screen. r Display mode button (57) The button switches the Single PC mode and Multi PC mode. t Connect button The screen to select the connection mode
  • Hitachi CPX417 | Network Guide - Page 56
    , but the image transmissions on hold. The network connection is established and the images on the PC are being sent to the projector. The network connection to the projector is disconnected. 2) Status Display in Multi PC mode The icon is displayed at the right end of the Display mode buttons. One
  • Hitachi CPX417 | Network Guide - Page 57
    on the main menu is replaced by the icon you selected. NOTE • The image transmission will be stopped, when you click the Single mode button while the projector is in the Single PC mode (Refer to  the MIU Menu in the User's Manual (detailed) - Operating Guide for the function on the projector.) 57
  • Hitachi CPX417 | Network Guide - Page 58
    the image quality is worse. Image quality Image quality takes priority over Speed. It makes JPEG compression rate lower. The screen on the projector is rewritten slower because the transferred data is larger, but the image quality is better. w Cursor Emulation If a mouse cursor (pointer) on your
  • Hitachi CPX417 | Network Guide - Page 59
    to 20 letters can be input by using alphanumeric characters. The user name can be displayed on the projector screen, so you can find out whose image is currently on the screen. (Refer to  MIU Menu in the User's Manual (detailed) - Operating Guide) If the check box is not marked, the information is
  • Hitachi CPX417 | Network Guide - Page 60
    network connection is often used. 3.8.2 Making Profile data The profile data is made on the Manual Configuration screen. (41) Up to 10 profile data can be stored for each network adapter ) • If you change a wireless network adapter on the projector or PC, make a new profile data for the adapter. 60
  • Hitachi CPX417 | Network Guide - Page 61
    3.8 Profile data (continued) 3.8.3 Editing Profile data If necessary, the profile data can be edited on the Manual Configuration screen. (41) 1) Select [Profile], and select one of the data listed in the window. 2) Click [Edit]. 3. Using the Live Mode 3) The "Edit profile" screen
  • Hitachi CPX417 | Network Guide - Page 62
    3. Using the Live Mode 3.8 Profile data (continued) 3.8.4 Registering My Connection One of the profile data, which is often used, can be registered as the My Connection profile data. Once the data is registered, all you need to do is to select the My Connection to connect to the network. (29) 1)
  • Hitachi CPX417 | Network Guide - Page 63
    ) Also, you can register a profile data to My Connection, when the network connection is established. When it is established, the "Connection to Projector successful" screen is displayed. (50) If you wish to use the current connection setting for My Connection, check in the box for [Register
  • Hitachi CPX417 | Network Guide - Page 64
    is equipped with the following network functions by using a web browser software. Configuring and Controlling the Projector via a Web Browser You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (67) E-mail
  • Hitachi CPX417 | Network Guide - Page 65
    your web browser configuration, you must enable JavaScript in order to use the projector web pages properly. See the Help files for your web browser for especially recommended that all users running Internet Explorer on a Microsoft Windows version prior to Windows XP Service Pack 2 install security
  • Hitachi CPX417 | Network Guide - Page 66
    required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs. Item Description Network Information Displays the projector's current network configuration settings. Network Settings Displays and configures
  • Hitachi CPX417 | Network Guide - Page 67
    the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: Fig. 4.1.1 b "Logon with Administrator ID" Fig. 4.1.1 c "Logon with User ID" 3) Click the desired operation or configuration item on the main menu
  • Hitachi CPX417 | Network Guide - Page 68
    will not be displayed when the NETWORK MODE is set to the WIRED even if the wireless network card is mounted. (MIU Menu in the User's Manual (detailed)) - Operating Guide) Firmware Date Firmware Version Displays the network firmware time stamp. This information is only displayed when logged
  • Hitachi CPX417 | Network Guide - Page 69
    Mode IP Configuration DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Projector Name sysLocation (SNMP) sysContact (SNMP) DNS Server Address Description Select Network mode "Wired" or "Wireless". Configures network settings. Enables DHCP. Disables DHCP. Configures the IP address when DHCP
  • Hitachi CPX417 | Network Guide - Page 70
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Wireless Mode CH (Communication channel) Description Select "AD-HOC" or "Infrastructure". Select using channel between "1" and "11". NOTE • Depending on the country where you
  • Hitachi CPX417 | Network Guide - Page 71
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.4 Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control Port2 (Port:
  • Hitachi CPX417 | Network Guide - Page 72
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.5 Mail Settings Displays and [Send Test Mail]. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. 72
  • Hitachi CPX417 | Network Guide - Page 73
    User's Manual (detailed) - Operating Guide) "CHANGE THE LAMP" is displayed. "CHANGE THE LAMP" is displayed. Cold Start The Power switch is turned on. (Off → standby mode) Authentication Failure The SNMP access is detected from the invalid SNMP community. Refer to "Troubleshooting" in the User
  • Hitachi CPX417 | Network Guide - Page 74
    projector screen. The e-mail will be sent when the filter timer exceeds 50, 100, 200, 300, 400, 500, 600, 700 or 800 hours based on the configuration. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN OFF. (OPTION Menu in the User's Manual (detailed) - Operating Guide) • Lamp
  • Hitachi CPX417 | Network Guide - Page 75
    and controlling the projector via a web browser (Continued) 4.1.7 Schedule Settings Displays and configures schedule settings. Item Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday Specific date No.1 Specific date No.2 Specific date No.3 Specific date No.4 Specific date No
  • Hitachi CPX417 | Network Guide - Page 76
    4.1 Configuring and controlling the projector via a web browser (Continued) The daily and weekly event items are shown below. Item Schedule Schedule List Daily & Weekly Description Click [Enable] check box to enable the schedule. Displays the current schedule. The specific date event items are
  • Hitachi CPX417 | Network Guide - Page 77
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.8 Date/Time Settings Displays and configures the date and time settings. Item Current Date Current Time Daylight Savings Time Start Month
  • Hitachi CPX417 | Network Guide - Page 78
    Date and Time information from the SNTP server (hours:minutes). Click [Apply] button to save the settings. NOTE • If you connect the projector to an existing network, consult a network administrator before setting server addresses. • To enable the SNTP function, the time difference must be set
  • Hitachi CPX417 | Network Guide - Page 79
    and controlling the projector via a web browser (Continued) 4.1.9 Security Settings Displays and configures passwords and other security settings. Item Administrator authority Administrator ID Administrator Password Re-enter Administrator Password User authority User ID User Password Re-enter
  • Hitachi CPX417 | Network Guide - Page 80
    Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Network Control Authentication Password Re-enter Authentication Password SNMP Community name FTP User Password Re-enter Password Description Configures the Authentication password
  • Hitachi CPX417 | Network Guide - Page 81
    value if the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button. Controls the projector. Item Main The variable range: • For a Computer, HDMI or MIU signal 0-48 • For a video, component or s-video signal 0-16 Adjusts the brightness setting. Adjusts
  • Hitachi CPX417 | Network Guide - Page 82
    software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Image Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Execute Input Progressive Video NR Color Space Component C-Video Format S-Video Format HDMI Frame LockComputer1 Frame LockComputer2 Frame
  • Hitachi CPX417 | Network Guide - Page 83
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Volume Speaker Audio-Computer1 Audio-Computer2 Audio-HDMI Audio-Video Audio-S-Video Audio-Component Audio-MIU HDMI-Audio Screen Language Menu Position V Menu Position H Blank
  • Hitachi CPX417 | Network Guide - Page 84
    via a web browser (Continued) The Service item in the Projector Control menu is shown only when you logon with the Administrator ID. The items shown in the table below can be performed using the Projector Control menu. Click [Quit Presenter Mode]. Item Service Quit Presenter Mode Description Quit
  • Hitachi CPX417 | Network Guide - Page 85
    via your Web browser at the same time. It may cause some operational errors in the projector. The functions on the bundled remote control are assigned to the Web Remote Control screen. Item POWER COMPUTER VIDEO BLANK FREEZE MUTE MENU UP DOWN LEFT RIGHT ENTER RESET PAGE UP PAGE DOWN Description
  • Hitachi CPX417 | Network Guide - Page 86
    onto the "Thumbnail mode". Selecting this item sets the projector onto the "Slide Show mode". Selecting this item sets the projector onto the "Directory mode". NOTE • The Web Remote Control does not support repeat function that performs an action while holding a button clicked down. • Since
  • Hitachi CPX417 | Network Guide - Page 87
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.12 Projector Status Displays and configures the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze Description
  • Hitachi CPX417 | Network Guide - Page 88
    connection in order to activate new configuration settings. NOTE • Restarting requires you to re-log on in order to further control or configure the projector via a web browser. Wait 10 seconds or more after clicking [Restart] button to log on again. • The Logon menu (67) is displayed after
  • Hitachi CPX417 | Network Guide - Page 89
    's e-mail alert function, please configure the following items through a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and password
  • Hitachi CPX417 | Network Guide - Page 90
    ] button to save the settings. Failure/Warning e-mails are formatted as follows: Subject line : Text : Date Time IP Address MAC Address
  • Hitachi CPX417 | Network Guide - Page 91
    . NOTE • It is recommended that SNMP functions be carried out by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings (71) Configure the following items via a web browser to use SNMP. Example: If the IP address of the
  • Hitachi CPX417 | Network Guide - Page 92
    including power on / power off. It enables to be "self-management" projector. NOTE • You can schedule the following control events: Power ON/OFF, one event has been scheduled for the same date and time (e.g., 'Specific day No. 1' has priority over 'Specific day No. 2' and so on. • Be sure to set the
  • Hitachi CPX417 | Network Guide - Page 93
    at the specified time on a specified day of the week. 3) Specific Date: Perform the specified operation on the specified date and time. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The schedule
  • Hitachi CPX417 | Network Guide - Page 94
    can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the been set correctly. Replace the battery by following the instructions on replacing the battery. (Internal clock battery in the User's Manual (concise)) •
  • Hitachi CPX417 | Network Guide - Page 95
    to the manual for the application for instructions. To display the transferred image, select the e-SHOT item in the MIU Menu. For more information, please see the description of the e-SHOT item of the MIU Menu. ( MIU Menu in User's Manual (detailed) - Operating Guide) NOTE • Supported file types
  • Hitachi CPX417 | Network Guide - Page 96
    TCP #9715 Command Control Settings (71) Configure the following items from a web browser when command control is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and
  • Hitachi CPX417 | Network Guide - Page 97
    4. Management with Web browser software 4.6 Command Control via the Network (Continued) When the authentication setting is enabled, the following settings are required. (79) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. *
  • Hitachi CPX417 | Network Guide - Page 98
    4. Management with Web browser software 4.6 Command Control via the Network (Continued) Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However
  • Hitachi CPX417 | Network Guide - Page 99
    0x15 Connection ID 1 byte Connection ID 1 byte Reply 0x1C Error code 2 bytes Reply Data 0x1D 2 bytes Reply Status code 0x1F 2 bytes Reply 0x1F Authentication Error code 0x04 0x00 Connection ID 1 byte
  • Hitachi CPX417 | Network Guide - Page 100
    a sample if the Authentication Password is set to "password" and the random 8 bytes are "a572f60c". 1) Select the projector. 2) Receive the random 8 bytes "a572f60c" from the projector. 3) Bind the random 8 bytes "a572f60c" and the Authentication Password "password" and it becomes "a572f60cpassword
  • Hitachi CPX417 | Network Guide - Page 101
    the image on the following modes. The PC-LESS Presentation can be operated on the OSD menu in the projector screen or via a web browser software in your PC connected to the projector through the network. The feature allows you to make your presentation without your PC. - Thumbnail Mode (103) - Full
  • Hitachi CPX417 | Network Guide - Page 102
    . Up to 2GB card is supported. • SD memory and the wireless network card (option) cannot be inserted at the same time. • Be careful to insert and remove SD memory card and USB memory. ( Using a USB storage/Using an SD card in the User's Manual (concise)) [Supported format] • FAT12, FAT16 and FAT32
  • Hitachi CPX417 | Network Guide - Page 103
    JEPG or other supported files (102) into root directory in a SD or USB storage media. 2) Insert the SD memory card into the SD card slot on the projector or the USB memory into the USB STORAGE port on the projector. (& Using a USB storage/Using an SD card in the User's Manual (concise)) 3) Press
  • Hitachi CPX417 | Network Guide - Page 104
    or other supported files (&102) into root directory in a SD or USB storage media. 2) Insert the SD memory card into the SD card slot on the projector or the USB memory into the USB STORAGE port on the projector. (& Using a USB storage/Using an SD card in the User's Manual (concise)) 3) Connect
  • Hitachi CPX417 | Network Guide - Page 105
    keypad or a web browser software. The following functions can be supported while the thumbnail is displayed. The remote control PAGE UP PAGE DOWN PC-LESS PRESENTATION menu * These operations are not accessible while the projector OSD menu is displayed. NOTE • The Thumbnail mode shows 12 pictures
  • Hitachi CPX417 | Network Guide - Page 106
    Thumbnail menu. 1) PC-LESS PRESENTATION MENU: Move the cursor to the PC-LESS PRESENTATION MENU, and push the ► cursor button on the remote control or projector, or RIGHT on the Web Remote Control. The PC-LESS PRESENTATION menu will be displayed. 2) REFLESH: Move the cursor to the REFLESH, and push
  • Hitachi CPX417 | Network Guide - Page 107
    Tree View. Full screen display Fig. 5.3 Full Screen Mode The following functions can be supported in the Full screen mode. Button operation *1) The remote control The keypad on the projector Web Remote in web browser software. Functions ▲/▼ or ◄/► *2) ▲/▼ or ◄/► *2) UP/DOWN or LEFT/RIGHT
  • Hitachi CPX417 | Network Guide - Page 108
    5. PC-LESS Presentation 5.3 Full Screen Mode (continued) You can display the image file with your desired size. 1) Select the DISPLAY SIZE in PC-LESS PRESENTATION menu. 2) Press the ENTER button on the remote control or ► button on the Keypad or RIGHT button on the Web Remote Control. 3) Then
  • Hitachi CPX417 | Network Guide - Page 109
    . NOTE • It is impossible to change the input port by the INPUT button if the THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed. • Display the projector OSD menu before changing the input port . • Images can be displayed when it is recorded in the playlist. • Image can not be displayed in the
  • Hitachi CPX417 | Network Guide - Page 110
    5. PC-LESS Presentation 5.4 Slide Show Mode (continued) You can play the Slide show at your desired configuration. Configure the SLIDE SHOW items in THUMBNAIL. 1) START # : Set the beginning number of the Slide show. 2) STOP # : Set the end number of the Slide show. 3) INTERVAL : Set the
  • Hitachi CPX417 | Network Guide - Page 111
    Directory Tree View You can display the directory with the projector menu. Select the DIRECTORY on the PC-LESS PRESENTATION menu. flame is displayed as preview. No preview is displayed if a folder or un-supported format file is selected. If the displayable file is selected and the ENTER button on
  • Hitachi CPX417 | Network Guide - Page 112
    . Displays a selected file as a preview in full screen. The un-supported format file cannot be opened. If the preview is displayed and Enter button Thumbnail Mode. Displays the menu. * These operations are not accessible while projector OSD menu is displayed. NOTE • It is not possible to change the
  • Hitachi CPX417 | Network Guide - Page 113
    ("MP4 Movie") - Time stamp (When file is created) - File size (Size of File) - Movie size (File resolution) - Movie time (Play time) Un-supported format file - File format ("File") - Time stamp (When file is created) - File size (Size of File) Directory - File format ("Directory") - Time stamp
  • Hitachi CPX417 | Network Guide - Page 114
    5. PC-LESS Presentation 5.6 "PC-LESS Presentation" error message Error message is displayed at a specific condition while "PC-LESS Presentation" mode. It appears at the bottom and the gray area of screen. Fig. 5.6 "PC-LESS Presentation" error message "PC-LESS
  • Hitachi CPX417 | Network Guide - Page 115
    5. PC-LESS Presentation 5.7 Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files or moving image files in the thumbnail or the slide show. The playlist file name is "imagelistdir.txt". It is created in each folder when the PC-LESS Presentation is
  • Hitachi CPX417 | Network Guide - Page 116
    6. Troubleshooting Problem Likely Cause Things to Check Reference Page Number No image The projector is not turned on. Is the projector's lamp on? *16 The projector's input source Is the projector switched to isn't switched to MIU. MIU? *17 Check both the PC and projector's network
  • Hitachi CPX417 | Network Guide - Page 117
    does not respond - Image on screen is frozen. Communication between the projector and PC is not working well. MIU Functions of the projector is not working well. Try "MIU RESTART" in SERVICE menu under the MIU menu. *12 *50 *57 11-13, 41 *56 *62 * User's Manual (detailed) - Operating Guide 117
  • Hitachi CPX417 | Network Guide - Page 118
    Wireless network card USB Specifications JPEG, PNG, Bitmap and MPEG4 Dedicated PC application and Web browser TCP/IP, DHCP client and HTTP server Wireless Professional Service Pack 4 CPU: Pentium III 600MHz or more is recommended. Memory size: 64MB or more, 128MB or more in case of XP Video RAM:
  • Hitachi CPX417 | Network Guide - Page 119
    and after-sales service 8. Warranty and after-sales service If a problem occurs with the equipment, please read "6. Troubleshooting" (116) section first and review all suggested check points. After that, please contact your dealer or service company, if you still have the problem. They will tell
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
±
Projector
CP-X417
User's Manual (detailed)
Network Guide
Thank you for purchasing this projector.
This projector has the network function that brings you the following main features.
►Before using this product, be sure to read all manuals for this
product.
After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Windows is a registered trademark of Microsoft Corporation.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
All other trademarks are the properties of their respective owners.
ü
Live Mode
This projector can project your PC images on screen through wireless or wired
network, which can erase a signal cable from your desk.
ü
Quick connection to your network
No expert knowledge is required any more. Various options for network setting
give you a quick and simple connection to the network.
ü
Web control
The projector can be controlled and monitored by a web browser software on
your PC, which can help you to setup and maintain the projector.
ü
PC-LESS Presentation
This projector can project images stored in an SD memory or a USB memory
on screen, which allow you not to bring your PC with you.
This manual is only intended to explain Network functions only.
For safety, operations or any other issues, refer to the Safety Guide and User’s
Manual (concise and detailed).