Home » Hitachi Manuals » Projectors » Hitachi CPX430 » Manual Viewer

Hitachi CPX430 User Manual

Hitachi CPX430 Manual

View all Hitachi CPX430 manuals

Add to My Manuals
Save this manual to your list of manuals

Hitachi CPX430 manual content summary:

Hitachi CPX430 | User Manual - Page 1
TECHNICAL PORTGÊS NORSK NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Liquid Crystal Projector CP-X430W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. BEDIENUNGSANLEITUNG Bitte lessen Sie diese Bedienungsanleitung zugunsten der
Hitachi CPX430 | User Manual - Page 2
CA 94005-1835 Tel: +1-800-225-1741 Fax: +1-650-244-7776 www.hitachi.com/lcd. Hitachi Canada, Ltd. 6740 Campobello Road, Mississauga, Ontario L5N2L8, Canada Tel: +1-905-821-4545 Fax: +1-905-821-1101 Hitachi Home Electronics (Europe), Ltd. Dukes Meadow, Millboard Road, Bourne End , Buckinghamshire SL8
Hitachi CPX430 | User Manual - Page 3
Options Menu 15 No Signal Menu 16 MAINTENANCE 17 Lamp 17 Air Filter 19 Other Maintenance 19 Page TROUBLESHOOTING 20 OSD Message 20 Indicators Message 21 Symptom 22 SPECIFICATIONS 23 WARRANTY AND AFTER-SERVICE ......24 TABLES Table 1. Installation Reference 6 Table 2. Cabling 7 Table
Hitachi CPX430 | User Manual - Page 4
reshipment. Projector Liquid Crystal Projector CP-X430W USER'S MANUAL Please read this user's manual thoroughly to Video Cable (with green lead) Mouse cable (PS/2) STANDBY/ON BLANK LASER VIDEO RGB Batteries for Remote Control Transmitter AUTO MENU KEYSTONE MENU SELECT POSITION RESET
Hitachi CPX430 | User Manual - Page 5
Intake for the Cooling Fan INPUT Button LAMP Indicator TEMP Indicator POWER Indicator RESET Button MENU Button Ventilation Openings (exhaust) REAR/RIGHT VIEW OF THE PROJECTOR S-VIDEO Terminal COMPONENT VIDEO Y Terminal CB/PB Terminal CR/PR Terminal VIDEO IN Terminal AUDIO IN R Terminal AUDIO IN
Hitachi CPX430 | User Manual - Page 6
BLANK STANDBY/ON LASER RGB VIDEO BLANK Button LASER Button RGB remote control transmitter. • Do not wet the remote control transmitter or place it on any wet object. • Do not place the remote control transmitter close to the cooling fan of the projector. • Do not disassemble the remote control
Hitachi CPX430 | User Manual - Page 7
. Make sure the plus and minus poles are correctly oriented. 1 2 3. Close the battery cover. CAUTION • Use only the specified batteries with this remote control transmitter. Also, do not mix new and old batteries. This could cause in battery cracking or leakage, which could result in fire or
Hitachi CPX430 | User Manual - Page 8
CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual "SAFETY INSTRUCTIONS" and this manual. • When you fix • Do not install LCD projector in smoke effected environment. Smoke residue may buildup on critical parts (i.e.LCD panel, Lens Assy etc
Hitachi CPX430 | User Manual - Page 9
have to be used with the core set to the projector side. Use the cables which are included with the projector or specified. NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device. • Secure the screws on the
Hitachi CPX430 | User Manual - Page 10
Video Tape Recorder COMPONENT VIDEO CR/PR CB/PB Y AUDIO R IN S-VIDEO IN L VIDEO IN AUDIO 1 2 AUDIO OUT USB IN Display Monitor %7* 1 RGB IN 2 RGB OUT CONTROL display of LCD and CRT). Please read instruction manual of the notebook for more information. Plug & Play This projector is VESA
Hitachi CPX430 | User Manual - Page 11
the above-mentioned procedure for turning power off. Incorrect procedure will reduce the life of the projector lamp and LCD panel. • To prevent any trouble, turn on/off the projector when the computer or video tape recorder is OFF. Providing a RS-232C cable is connected, turn on the computer before
Hitachi CPX430 | User Manual - Page 12
remote control transmitter or the projector control panel. Items indicated by (*) may be used from the control panel. Table 3 . Basic Operation Item INPUT SELECT POSITION Description Select Input Signal (*) : Press the INPUT button. RGB IN 1→RGB IN 2→DVI→ VIDEO IN → S-VIDEO IN → COMPONENT VIDEO
Hitachi CPX430 | User Manual - Page 13
automatically. Valid only when AUTO is set for VIDEO on the menu. • This operation requires approximately the MENU SELECT button. Allows the user to select the normal menu or the • The MENU SELECT button may operate as the mouse control button. Refer to page 4. Normal menu Single menu SETUP
Hitachi CPX430 | User Manual - Page 14
of the menu. Part of the Setup menu differs between RGB input and video input. Select an item with the and buttons, and start operation. Use correctly if the horizontal ✔ size is excessive. In such cases, press the RESET button, - - and initialize the horizontal size. SHARPNESS Adjustment: Soft ↔
Hitachi CPX430 | User Manual - Page 15
seconds. It may not function correctly with some input signals. Pressing the AUTO button in this case may correct this problem except for the N-PAL input. • For the COMPONENT VIDEO input, this function is not effective and the signal type is distinguished automatically. Refer to the item HDTV of the
Hitachi CPX430 | User Manual - Page 16
and return to the NORM. of the MyScreen menu, press the RESET button. In the MyScreen Display Size mode, select the magnification x1, signal of P. in P. Display : Press the or button. VIDEO ↔ S-VIDEO GAMMA Select Gamma Mode: Select the gamma mode with the NORMAL ↔ CINEMA ↔ DYNAMIC /
Hitachi CPX430 | User Manual - Page 17
WHISPER mode is active. In the WHISPER mode, acoustic noise level from the unit is reduced, and brightness level on screen is a little lower. Select Remote Control Sensor: Select the sensors to activate along the menu with the / button. Use this function if the
Hitachi CPX430 | User Manual - Page 18
. IR REMOTE Table 8. No Signal Menu Item Description VOLUME Reduce ↔ Increase • When this function is used, audio input is automatically switched to video. The on screen is a little lower. Select Remote Control Sensor: Select the sensors to activate along the menu with the / button. Use
Hitachi CPX430 | User Manual - Page 19
. • Also, do not use old lamp. This could also cause explosion of the lamp. • Premature lamp failure MAY be caused by an electronic component in the projector and not necessarily the lamp. If unsure contact your local service center. • If it is probable that the lamp has exploded (explosive sound is
Hitachi CPX430 | User Manual - Page 20
timer on the bottom of the screen. 2. Press the MENU button on the remote control transmitter, or the RESET button on the control panel, while the lamp timer is displayed. The 'LAMP xxxx → 0 I CANCEL' message will then appear. 3. Press the and select 0, and wait until the timer display is cleared
Hitachi CPX430 | User Manual - Page 21
Please read the separate "SAFETY INSTRUCTIONS" thoroughly to ensure that maintenance is prevent the temperature rising inside the projector. Other Maintenance Maintenance Inside the lens with your hands. Cleaning the Cabinet and Remote control transmitter Gently wipe with a soft cloth. If dirt
Hitachi CPX430 | User Manual - Page 22
reset the lamp timer after replacing the lamp. NO INPUT IS DETECTED ON *** No input signal found. Check signal input connections and signal sources. SYNC IS OUT OF RANGE ON *** The horizontal or vertical frequency of the input signal is not within the specified range. Check the specifications
Hitachi CPX430 | User Manual - Page 23
TROUBLESHOOTING (continued) Indicators Message The POWER indicator, LAMP indicator, and TEMP indicator are lit and blank as follows. Take the appropriate measures. Table 10. Indicators Message POWER LAMP the lamp if the same problem occurs. Blinks /Lights red Blinks red Lamp or lamp cover
Hitachi CPX430 | User Manual - Page 24
disconnected. power outlet. The input is not correctly set. Use the projector or remote control transmitter to set. 10 No video or audio. No signal input. Connect correctly. 7,8 The projector is not correctly connected. Video is present but no audio. The volume is set to minimum. Connect
Hitachi CPX430 | User Manual - Page 25
Stereo mini jack VIDEO IN 1.0Vp-p, 75Ω terminator RCA jack Video signal input S-VIDEO IN Brightness signal: Control CONTROL functions USB D-sub 15-pin shrink plug USB jack (B type) Optional Parts Lamp: DT00471 Air Filter: NJ06131 * For others, consult your dealer. NOTE • This specifications
Hitachi CPX430 | User Manual - Page 26
WARRANTY AND AFTER-SERVICE If a problem occurs with the equipment, first refer to the P.20 "TROUBLESHOOTING" section and run through the suggested checks. If this does not resolve the problem contact your dealer or service company. They will tell you what warranty condition is applied. ENGLISH-24
Hitachi CPX430 | User Manual - Page 27
0 18 T.M.D.S. Data 0 + 19 T.M.D.S. Data 0 / 5 Shield 1234 5678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 20 - 3. Mini Din 4-pin Connector (S-VIDEO) Pin No Signal 1 Color:0.286Vp-p (NTSC, burst signal),75Ω terminator 0.300Vp-p (PAL/SECAM, burst signal),75Ω terminator 2 Brightness:1.0Vp
Hitachi CPX430 | User Manual - Page 28
56Hz) SVGA (60Hz) SVGA (72Hz) SVGA (75Hz) SVGA (85Hz) Mac16"mode XGA (60Hz) XGA (70Hz) XGA (75Hz) XGA (85Hz) SXGA (75Hz) SXGA (60Hz) SXGA (60Hz) SXGA (75Hz) Display with this projector. • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer
Hitachi CPX430 | User Manual - Page 29
porch d Display interval c DATA HSYNC Sync a VSYNC Sync a Computer / Signal VGA-1 (85Hz) VGA-2 (85Hz) TEXT VGA (60Hz) Mac 13"mode VGA (72Hz) VGA (75Hz) VGA (85Hz) SVGA (56Hz) SVGA (60Hz) SVGA (72Hz) SVGA (75Hz) SVGA (85Hz) Mac 16"mode XGA (60Hz) XGA (70Hz) XGA (75Hz) XGA (85Hz) 1152×864 (75Hz
Hitachi CPX430 | User Manual - Page 30
instruction manuals of the devices to be connected. • In the case of notebook type computers with an internal pointing device, the mouse control . Refer to the computer hardware manual for detail. PS/2 Mouse CONTROL Terminal D-sub 15-pin shrink jack Projector 1 CLK 2 DATA 3 4 5 SEL0 6 RTS
Hitachi CPX430 | User Manual - Page 31
Terminal D-sub 15-pin shrink jack Serial Mouse CONTROL Terminal D-sub 15-pin shrink jack Projector 1 2 DATA 3 4 5 6 RTS 7 8 +5V 9 GND 10 11 12 13 14 15 Projector 1 2 3 4 5 SEL0 6 RTS 7 8 9 GND 10 11 12 13 TD 14 15 USB Mouse Computer 1 ADB 2 (POWER ON) 3 +5V 4 GND Mouse jack
Hitachi CPX430 | User Manual - Page 32
Control jack D-sub 15-pin shrink jack Projector 1 2 3 4 5 SELO 6 RTS 7 8 9 GND 10 11 12 RD 13 TD 14 15 Computer 1 CD 2 RD 3 TD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI RS-232C jack D-sub 9-pin 1 2345 6789 Communications setting 19200bps, 8N1 1 Protocol Consist of header (7 bytes) + command data
Hitachi CPX430 | User Manual - Page 33
response code '06H' to the computer. Using the projector default settings (Reset Command) (1) The computer sends the default setting code Header + Command data ('06H'+'00H'+ type (2 bytes) +'00H'+'00H') to the projector. (2) The projector changes the specified setting to the default value. (3) The
Hitachi CPX430 | User Manual - Page 34
Français Deutsch Español Set Italiano Norsk Nederlands Português Japanese Get TECHNICAL - 8 Command data chart Header BE EF 03 BE EF 03 BE EF 03 BE EF 03 BE EF 03 D0 01 00 06 00 9B D0 01 00 06 00 FB CA 01 00 Command data Type Setting code 00 30 00 00 00 30 01 00 00 30 02 00
Hitachi CPX430 | User Manual - Page 35
data 00 Brightness Reset Execute BE EF 03 06 00 58 D3 06 00 00 70 00 00 Contrast Reset Execute BE 00 (Fan-error) 03 00 (Lamp-error) 04 00 (Temp-error) 05 00 (Air flow-error) 06 00 (Lamp-Time-over) BE EF BE EF 01 00 00 20 04 00 Input Source DVI Set Video BE EF BE EF 03 06 00 0E D2 01
Hitachi CPX430 | User Manual - Page 36
Increment Decrement Get Increment Decrement Get Increment Decrement Get Increment Decrement TECHNICAL - 10 Command data chart Header BE EF 03 BE EF 03 BE EF 03 BE EF 03 BE EF 00 B9 D3 02 00 DF D3 04 00 0E D2 05 00 Command data Type Setting code 02 20 00 00 02 20 01 00 02 20 00
Hitachi CPX430 | User Manual - Page 37
continued) Names Operation type Sharpness Color Tint Video Format HDTV PinP Size PinP Position Get bottom left bottom right Get Set PinP Audio ch RGB Video Get Set PinP Input Video S-Video Get Command data chart Header Command data CRC Action Type Setting code BE EF BE EF BE
Hitachi CPX430 | User Manual - Page 38
type Set Sync on G Set WHISPER Set GAMMA Set IR Remote Front Set IR Remote Rear Set IR Remote Top off on Get NORMAL WHISPER Get NORMAL CINEMA DYNAMIC Get off on Get off on Get off on Get Command data chart Header Command data CRC Action Type Setting code BE EF 03 06 00
Hitachi CPX430 | User Manual - Page 39
radio/TV technician for help. INSTRUCTIONS TO USERS: This equipment complies with the projector side. Use the cables which are included with the projector or specified. Core CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user
Hitachi CPX430 | User Manual - Page 40