Home » Hitachi Manuals » Projectors » Hitachi CPX467 » Manual Viewer

Hitachi CPX467 User Manual

Hitachi CPX467 Manual

View all Hitachi CPX467 manuals

Add to My Manuals
Save this manual to your list of manuals

Hitachi CPX467 manual content summary:

Hitachi CPX467 | User Manual - Page 1
Projector CP-X467 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this
Hitachi CPX467 | User Manual - Page 2
Auto off, Lamp time, Operating 17 Filter time, My button, Adjusting the volume 17 My source, Service, Security Troubleshooting 73 Using the menu function 24 Related messages 73 EASY MENU 26 Regarding the indicator lamps . . . . . 74 Aspect, Auto keystone Execute, Shutting the projector
Hitachi CPX467 | User Manual - Page 3
connection. ü The HDMI port can support various image equipment which have digital interface to get clearer pictures on a screen. Preparations Contents of package Please see the "Contents of package" section in the User's Manual (concise) which is a book. Your projector should come with the items
Hitachi CPX467 | User Manual - Page 4
after use, since it is too hot. ►Do not look into the lens or vents while the lamp is on, since the strong light is not good for your eyes. ►Do not handle the elevator buttons without holding the projector, since the projector may drop down. CAUTION ►Maintain normal ventilation to prevent the
Hitachi CPX467 | User Manual - Page 5
buttons. (4) POWER indicator (&16, 74) (5) TEMP indicator (&74) (6) LAMP indicator (&74) (6) (5) (4) (1) (3) (2) Rear panel (&9) (1) (2) (1) (3) CAUTION ►Use the shutdown switch only when the projector is not turned off by normal procedure, since pushing this switch stops operation of the
Hitachi CPX467 | User Manual - Page 6
Part names Remote control (1) VIDEO button (&18) (2) COMPUTER button (&17) (3) SEARCH button (&19) (4) STANDBY/ON button (&16) (5) ASPECT button (&19) (6) AUTO button (&21) (7) BLANK button (&23) (8) MAGNIFY - ON button (&22) (9) MAGNIFY - OFF button (&15, 22) (10) MY SOURCE/DOC.CAMERA button (&18,
Hitachi CPX467 | User Manual - Page 7
c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. a Screen size (diagonal) type
Hitachi CPX467 | User Manual - Page 8
into or stick to the vents on the bottom of the projector. This projector has some intake vents also on the bottom. ►Do not place the projector anyplace where it may get wet. Getting the projector wet or inserting liquid into the projector could cause fire, electric shock and/or malfunction of the
Hitachi CPX467 | User Manual - Page 9
Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the
Hitachi CPX467 | User Manual - Page 10
. ►Make sure that devices are connected to the correct ports. An incorrect connection may result in malfunction or damage to the device and the projector. ►Be sure to consult the administrator of the network. Do not connect LAN port to any network that might have the excessive voltage. (continued
Hitachi CPX467 | User Manual - Page 11
. 3. Remove the SD card slot cover. After taking the SD card away, replace the SD card slot cover. WARNING ►Do not disassemble or modify the projector and accessories. CAUTION ► Do not touch the SD card while being accessed. ►The designated wireless network card that is sold as an option is required
Hitachi CPX467 | User Manual - Page 12
with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the
Hitachi CPX467 | User Manual - Page 13
wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. Anti-theft chain or wire Security slot Security bar WARNING ►Do not use the security bar
Hitachi CPX467 | User Manual - Page 14
2. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according with the projector's remote sensor. This projector has a remote infrared light to send signals to the projector (Class 1 LED), so be sure the remote control's signal to the projector. • The remote control may not
Hitachi CPX467 | User Manual - Page 15
that the REMOTE FREQ. in the SERVICE item of the OPTION menu (48) of the projector to be controlled should be set to a PC. Be sure to check your PC's manuals before connecting this product to the PC. (3) (5) when the projector is working properly. This function is not available while the lamp is
Hitachi CPX467 | User Manual - Page 16
The message "Power off?" will appear on the screen for about 5 seconds. 2. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then POWER indicator will stop blinking and light in steady orange when the
Hitachi CPX467 | User Manual - Page 17
is disabled. Please see AUDIO item of AUDIO menu (39). ● W hen the projector is in the standby mode, the volume can be adjusted if is not selected for item of the C.C. menu is set to AUTO and the input signal supports the C.C. feature (66). MUTE button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA
Hitachi CPX467 | User Manual - Page 18
signal is detected (44). If VIDEO button is pressed when POSITION MENU COMPUTER IN1, COMPUTER IN2 or HDMI port, or MIU is selected, the projector will check COMPONENT port first. ENTER ESC RESET 1. Press the MY SOURCE / DOC. CAMERA button on the remote control. The input signal will be
Hitachi CPX467 | User Manual - Page 19
VIDEO S-VIDEO COMPONENT (Y, Cb/Pb, Cr/Pr) POSITION MENU ENTER ● While TURN ON is selected for AUTO SEARCH item in OPTION menu (ES4C 4), the RESET projector will keep checking the ports in above order repeatedly till an input signal is detected. ● The MIU input is skipped, as long as no image
Hitachi CPX467 | User Manual - Page 20
the elevator feet. 4. After making sure that the elevator feet are locked, put the projector down gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet. To loose an elevator foot, push the elevator button on
Hitachi CPX467 | User Manual - Page 21
outside a picture. ● The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION MY SOURCE/ VIDEO COMPUTER DOC.CAMERA menu (47). ASPECT AUTO SEARCH BLANK Adjusting the position 1. Press POSITION button on the remote
Hitachi CPX467 | User Manual - Page 22
correcting the distortion. 2. Use the ▲/▼ cursor buttons to select AUTO, MANUAL or PERFECT FIT operation, and press the ► button to perform the is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, automatic vertical keystone correction may not
Hitachi CPX467 | User Manual - Page 23
mode, the keystone distortion condition may vary, it will be restored when the projector exits from the MAGNIFY mode. NOTE • The zoom level can be finely selected for the MESSAGE item in the SCREEN menu (42)), and the projector will go into the FREEZE mode, which the picture is frozen. To exit
Hitachi CPX467 | User Manual - Page 24
.SCAOUMERRCAE/ DOWN RESET MENU ENTER ESC MY1BUTTON VIDEO ASPECT KEYSTONE ON MAGNIFY OFF POSITION 1. Press the MENU button on the remote control or the projector. The Advanced Menu or EASY MENU, which has priority just after powered on will appear. If you want to move the menu position, use
Hitachi CPX467 | User Manual - Page 25
Using the menu function (continued) Operating In the Advanced Menu 2. Use the ▲/▼ cursor buttons to select a menu. If you want to change it to the EASY MENU, select EASY MENU. Then press the ► cursor button, or ENTER button to select an item. The lower layer menu of the selected item will appear.
Hitachi CPX467 | User Manual - Page 26
EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item ASPECT AUTO KEYSTONE EXECUTE KEYSTONE KEYSTONE PERFECT FIT Description Using the ◄/► buttons switches the
Hitachi CPX467 | User Manual - Page 27
EASY MENU EASY MENU (continued) Item BRIGHTNESS CONTRAST COLOR TINT SHARPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE Go to Advanced Menu... Description Using the ◄/► buttons adjusts the brightness. See BRIGHTNESS item in PICTURE menu (28). Using the ◄/► buttons adjusts the contrast. See
Hitachi CPX467 | User Manual - Page 28
PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item BRIGHTNESS CONTRAST GAMMA
Hitachi CPX467 | User Manual - Page 29
PICTURE menu PICTURE menu (continued) Item Description Using the ▲/▼ buttons switches the color temperature mode. #1 HIGH � #1 CUSTOM � #2 MID � #2 CUSTOM � � #6 CUSTOM #3 LOW � � #6 Hi-BRIGHT-3 #3 CUSTOM � � #5 CUSTOM � #5 Hi-BRIGHT-2 � #4 CUSTOM � #4 Hi-BRIGHT-1 COLOR TEMP COLOR
Hitachi CPX467 | User Manual - Page 30
be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. This projector has 4 memories for adjustment data (for all the items of PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button performs each function
Hitachi CPX467 | User Manual - Page 31
IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. IMAGE menu Item Description Using the ▲/▼ buttons
Hitachi CPX467 | User Manual - Page 32
appear outside a picture. • The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (47). 32
Hitachi CPX467 | User Manual - Page 33
FILM is selected, the screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a for a SCART RGB input to the projector. For your reference, see the Technical part. (continued on next page) 33
Hitachi CPX467 | User Manual - Page 34
INPUT menu INPUT menu (continued) Item VIDEO FORMAT Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ◄/► buttons to select the input port. (2) Using the ▲/▼ buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 • This
Hitachi CPX467 | User Manual - Page 35
the SYNC ON G OFF, and then reconnect the signal. The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector. (1)In the INPUT menu, select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2)In the RESOLUTION menu
Hitachi CPX467 | User Manual - Page 36
some input, this function may not work well. • When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. • When the zoom adjustment is set to the TELE (telephoto focus), this function
Hitachi CPX467 | User Manual - Page 37
SETUP menu SETUP menu (continued) Item KEYSTONE PERFECT FIT WHISPER Description Using the ▲/▼ buttons corrects the horizontal keystone distortion. Shrink the right of the image ó Shrink the left of the image • The adjustable range of this function will vary among inputs. For some input, this
Hitachi CPX467 | User Manual - Page 38
with some functional restriction as below: • When SAVING is selected, the communication control (RS232C, network) is disabled except to turn the projector on while the projector is in the standby mode. • When SAVING is selected, AUDIO OUT STANDBY setting of AUDIO (39) is invalid, and no signal
Hitachi CPX467 | User Manual - Page 39
C.C.(Closed Caption) is automatically activated, if the C.C. is set to AUTO in the DISPLAY menu of the C.C. menu and the signal from the input port supports the C.C. feature (66). The HDMI AUDIO is set to 1 as default. In case the HDMI audio does not work well, try 2. 1 ó 2 39
Hitachi CPX467 | User Manual - Page 40
SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description LANGUAGE Using the ▲/▼
Hitachi CPX467 | User Manual - Page 41
SCREEN menu SCREEN menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen
Hitachi CPX467 | User Manual - Page 42
MODE displayed by changing The indication of the MY MEMORY displayed by changing The indication of "FREEZE" and "II" while the projector is in the FREEZE mode. • If the projector goes into the FREEZE mode while the TURN OFF is selected, the picture on screen is frozen without any messages, which is
Hitachi CPX467 | User Manual - Page 43
SCREEN menu SCREEN menu (continued) Item SOURCE NAME TEMPLATE Description Each input port for this projector can have a name applied to it. (1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu
Hitachi CPX467 | User Manual - Page 44
function. TURN ON  TURN OFF When set to the TURN ON, the lamp in projector will be automatically turned on without the usual procedure (16), only when the projector is supplied with the power after the power was cut while the lamp was on. • This function does not work as long as the power
Hitachi CPX467 | User Manual - Page 45
set to 1 to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of the commands (except get commands) is transmitted to the CONTROL
Hitachi CPX467 | User Manual - Page 46
adjustment, please press the ◄ button to quit. Otherwise loading a data will lose the current adjusted condition. • PICTURE MODE: Changes the IN)2  HDMI VIDEO  S-VIDEO  COMPONENT  MIU SERVICE Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press
Hitachi CPX467 | User Manual - Page 47
ó FAST ó DISABLE SERVICE (continued) FINE: Finer tuning including H.SIZE adjustment. FAST: F aster tuning, setting H.SIZE to prearranged data for the input signal. • Depending on conditions, such as input image, signal cable to the projector, environment around the projector, etc., the automatic
Hitachi CPX467 | User Manual - Page 48
SERVICE (continued) Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, FILTER MESSAGE, SECURITY and MIU settings are
Hitachi CPX467 | User Manual - Page 49
an incorrect PASSWORD is input, the ENTER PASSWORD box will be displayed again. If incorrect PASSWORD is input 3 times, the projector will turn off. Afterwards the projector will turn off every time an incorrect PASSWORD is input. 1.2 Changing the PASSWORD 1.2-1 Use the ▲/▼ buttons on the SECURITY
Hitachi CPX467 | User Manual - Page 50
displayed, press and hold the RESET button for about 3 seconds, or press and hold the INPUT button for 3 seconds while pressing the ► button on the projector. The 10-digit Inquiring Code will be displayed. • If there is no key input for about 55 seconds while the Inquiring Code is displayed, the
Hitachi CPX467 | User Manual - Page 51
will be sent after your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 3.1 Registering the PIN Code 3.1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN
Hitachi CPX467 | User Manual - Page 52
also turn off if there is no key input for about 5 minutes while the PIN BOX is displayed. This function will activate only when the projector is started after AC power is turned off. • Please do not forget your PIN Code. 3.2 Turning Off the PIN LOCK Function 3.2-1 Follow the procedure in
Hitachi CPX467 | User Manual - Page 53
menu to display the input signal. If the Transition Detector alarm is displayed for about 5 minutes, the lamp will turn off. This function will activate only when the projector is started after turning off the AC power. 4.2 Setting the Transition Detector PASSWORD 4.2-1 Use the ▲/▼ buttons on
Hitachi CPX467 | User Manual - Page 54
OPTION menu OPTION menu (continued) Item Description 4.2-4 Move the cursor to the right side of the PASSWORD AGAIN box and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button will return to the TRANSITION
Hitachi CPX467 | User Manual - Page 55
OPTION menu OPTION menu (continued) Item SECURITY (continued) Description 5. Using the MY TEXT PASSWORD function This item allows you to display your own message (MY TEXT) on the START UP screen and INPUT-INFORMATION-. It can be protected by a password to prevent it from being overwritten. 5.1
Hitachi CPX467 | User Manual - Page 56
20 seconds, then please make note of the PASSWORD during this time. Pressing the ENTER button on the remote control or INPUT button on the projector will return to the MY TEXT PASSWORD on/off menu. When the PASSWORD is set for the MY TEXT; • The MY TEXT DISPLAY menu will
Hitachi CPX467 | User Manual - Page 57
to display an image sent by 1 PC only, even though the MIU feature on this projector support Multi PC mode. • If the projector is required to display an image sent by other PC, execute the QUIT PRESENTER MODE function. • See the User's Manual - Network Guide for details. (continued on next page) 57
Hitachi CPX467 | User Manual - Page 58
LIVE MODE SETTING (continued) MULTI PC MODE The projector supports the Single PC mode that displays an image on full projector, the DISPLAY USER NAME box is shown as right. MULTI PC mode The Display User Names will be shown in the DISPLAY USER NAME box. • See the User's Manual - Network Guide
Hitachi CPX467 | User Manual - Page 59
item displays the PC-LESS PRESENTATION menu. Using the menu is able to make the projector display the images stored in an SD memory card or a USB memory, and realizes Control (Refer to User's Manual - Network Guide) except DISPLAY SIZE, KEY CONFIG. and REMOVE MEDIA. (continued on next page) 59
Hitachi CPX467 | User Manual - Page 60
used when DHCP is set to OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network . The DNS server is a system to control domain names and IP addresses on the Network. (continued on next page) 60
Hitachi CPX467 | User Manual - Page 61
and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. (Date/Time Settings of the User's Manual Network Guide) MODE Use the ▲/▼ buttons to select the mode of the network communication system. Select it according to
Hitachi CPX467 | User Manual - Page 62
MIU menu MIU menu (continued) Item SETUP (continued) SSID Description Use the ▲/▼ buttons to select the SSID to display the SSID menu. DEFAULT Pressing the ► or ENTER button when one of the DEFAULT (#1~#4) is selected. CUSTOM Press the ► or ENTER button when the # 5 CUSTOM is selected. The SSID
Hitachi CPX467 | User Manual - Page 63
ENTER or INPUT button, 1 character or all characters will be erased. The PROJECTOR NAME can be input up to 64 characters. (3) To change an already screen and press the ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and
Hitachi CPX467 | User Manual - Page 64
The application software "PJTransfer" is required to store image(s) into the projector. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE (MY IMAGE (Still Image Transfer) Display of the User's Manual - Network Guide) and the ► or ENTER button to display the image. • The
Hitachi CPX467 | User Manual - Page 65
and the wireless network card is not mounted. (2) DHCP is ON and the projector does not get address from DHCP server. • Nothing (blank) is shown in the ► or ENTER button on the remote control to perform the item. SERVICE MIU RESTART Use the ▲ button to restart the network communication. The
Hitachi CPX467 | User Manual - Page 66
or 480i@60 format component video source supporting C.C. feature to utilize this function. , narration, and / or sound effects of a television program or other video sources. The Closed Caption availability Text data, which is for additional information such as news reports or a TV program guide. The
Hitachi CPX467 | User Manual - Page 67
place. Handles 6. While putting the interlocking parts of the lamp cover and the projector together, slide the lamp cover back in place. Then firmly fasten the screw of the lamp cover. 7. Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu. (1) Press the MENU
Hitachi CPX467 | User Manual - Page 68
used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, consult your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • Using the lamp for long periods of time, could cause
Hitachi CPX467 | User Manual - Page 69
of this projector consists of a filter cover, two kinds of filters, and a filter frame. The new double large filters system is will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the projector to sufficiently cool down. 2.
Hitachi CPX467 | User Manual - Page 70
the air filter when it is damaged or too soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter
Hitachi CPX467 | User Manual - Page 71
HITACHI MAXELL, part number CR2032 or CR2032H. SD card slot cover 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector setting the clock, see the User's Manual - Network Guide. WARNING ►Be careful of handling a
Hitachi CPX467 | User Manual - Page 72
Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard objects. 72
Hitachi CPX467 | User Manual - Page 73
Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. WARNING ►Never use the projector dealer or service company. Otherwise if a problem occurs with the projector, the following section of this manual. After you have cleaned or changed the air filter
Hitachi CPX467 | User Manual - Page 74
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state.
Hitachi CPX467 | User Manual - Page 75
1 Power ON schedule is saved to the projector. Please refer to "Schedule Settings" section of User's Manual - Network Guide. NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such
Hitachi CPX467 | User Manual - Page 76
Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the the power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either of these has not been properly
Hitachi CPX467 | User Manual - Page 77
Troubleshooting Phenomena that may be easy to be mistaken for machine defects ( audio on your HDMI equipment is not set to Linear PCM. Sound does not The HDMI input on this projector supports Linear PCM audio 10 come out. only. Check the audio setting on your HDMI equipment. (continued) The
Hitachi CPX467 | User Manual - Page 78
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) working. Select NORMAL for WHISPER item in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal phase settings are not properly adjusted
Hitachi CPX467 | User Manual - Page 79
Item Specification Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.6cm (0.63 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens, F = 1.6 ~ 1.8, f = 18.9~ 22.6 mm (approximately) Lamp 230W UHB Speaker 10W
Hitachi CPX467 | User Manual - Page 80
Specifications Specifications (continued) 340 [unit: mm] 80 117 129 270 MENU BATTERY SD CARD USB STORAGE LAN DC 5V 0.5A COMPUTER IN1 COMPUTER IN2 MONITOR OUT HDMI CONTROL USB S-VIDEO AUDIO OUT AUDIO IN AUDIO IN3