Hitachi CPX467 Network Guide

Hitachi CPX467 Manual

Get Hitachi CPX467 PDF manuals and user guides View all Hitachi CPX467 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CPX467 manual content summary:

  • Hitachi CPX467 | Network Guide - Page 1
    Projector CP-X467 User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. ü L ive Mode This projector can project your PC images on screen through wireless or wired network, which can erase
  • Hitachi CPX467 | Network Guide - Page 2
    Manual Manual network data 60 3.8.1 Outline of Profile data. . . . . . 60 3.8.2 Making Profile data 60 3.8.3 Editing Profile data 61 3.8.4 Registering My Connection. . 62 4. Management with Web browser software. . 64 4.1 Configuring and controlling the projector 116 6. Troubleshooting 117 3.6.3
  • Hitachi CPX467 | Network Guide - Page 3
    not being accessed. Perform the REMOVE MEDIA procedure or turn the projector off before pulling out the media. To perform the REMOVE MEDIA procedure menu under the MIU menu. (MIU menu in the User's Manual - Operating Guide) CAUTION nThe accompanying IEEE802.11b/g wireless network card uses the
  • Hitachi CPX467 | Network Guide - Page 4
    Caution 0560 ! The manufacturer (Gemtek) hereby declare that this equipment (the wireless network card), model SD-Link11g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 4
  • Hitachi CPX467 | Network Guide - Page 5
    Live Viewer 3" that is required to install into your PC. (Fig.1.1.a) The "Live Viewer 3" captures PC screen image and sends to the projector through wired LAN or wireless LAN connection. (&20) Live Viewer 3 Fig. 1.1.a "Live Viewer 3" outlines (through wireless LAN connection) Fig. 1.1.b "Live Viewer
  • Hitachi CPX467 | Network Guide - Page 6
    the code to the "Live Viewer 3" in your PC. (&26) Fig.1.2 PASSCODE on the projector screen 2) Connection by the profile for the network You can set the information to connect the projector to your network as a profile data in the "Live Viewer 3" in your PC. After that, you just select the profile
  • Hitachi CPX467 | Network Guide - Page 7
    Configuring and controlling via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected the menus to configure the network settings, monitor the projector and so on. The Web Remote Control, one of the menus of web browser, allows you
  • Hitachi CPX467 | Network Guide - Page 8
    [Supported storage media] - SD memory card - USB memory (USB memory type, USB hard supported formats are FAT 12, FAT 16(FAT) and FAT 32. NTFS is not supported. • USB hub is not supported. Fig. 1.4 "PC-LESS Presentation" outlines "PC-LESS Presentation" can be controlled via keypad on the projector
  • Hitachi CPX467 | Network Guide - Page 9
    and Latin-1 characters are supported if the language setting is NOT Japanese. • The files may not be able to access depending on the type of USB hard disk, USB memory and USB card reader. • It is recommended to use external power supply cable if the USB hard disk drive has the power cable
  • Hitachi CPX467 | Network Guide - Page 10
    requirement. (&23) *2: The system for using the network function of the projector requires communication environment conforming 100Base-TX or projector after setting the STANDBY MODE to NORMAL (&SETUP menu in the User's Manual - Operating Guide). 2.2 Quick connection The "Live Viewer 3" supports
  • Hitachi CPX467 | Network Guide - Page 11
    LAN - If you don't use the "Live Viewer 3", you need to set up your network connection manually. This section explains how to set it up manually. 2.3.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator
  • Hitachi CPX467 | Network Guide - Page 12
    2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 5) Open "Local Area Connection Properties" window you use for network device. (Fig. 2.3.2.c) Fig. 2.3.2.c "Local Area Connection Properties" window 6) Set
  • Hitachi CPX467 | Network Guide - Page 13
    network connection setting - Wired LAN - (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector's one. And the entire IP address in the PC should not be overlapped with other equipments in the same
  • Hitachi CPX467 | Network Guide - Page 14
    2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 2.3.3 "Internet Option" setting 1) Click "Internet Options" in "Network and Internet Connections" window (Fig. 2.3.3.a) to open "Internet Properties" window. (Fig.2.3.3.b)
  • Hitachi CPX467 | Network Guide - Page 15
    and network setting 2.3 Manual network connection setting - Wired LAN - (continued) Fig. 2.3.3.c "Local Area Network (LAN) Settings" window 3) Uncheck all boxes in "Local Area Network (LAN) Settings" window. (Fig. 2.3.3.c) 2.3.4 Check connection Check PC and projector are connected properly here
  • Hitachi CPX467 | Network Guide - Page 16
    designated wireless network card (option) on the projector. This section is intended to explain how to set up wireless LAN connection manually. 2.4.1 Preparation for wireless LAN connection Fig. and install device driver. (Refer to the user guide for PC and wireless LAN device for detail.) 16
  • Hitachi CPX467 | Network Guide - Page 17
    as you want via a web browser on your PC or the menu on the projector. Refer to the item 4.1.3 Network Settings (&69) or MIU menu in the User's Manual - Operating Guide. 1) Open "Network Connections". (Fig. 2.4.2.a) Fig. 2.4.2.a "Network Connections" 2) Open "Wireless Network Connection Properties
  • Hitachi CPX467 | Network Guide - Page 18
    2. Equipment connection and network setting 2.4 Manual network connection setting -Wireless LAN (continued) 3) Set used protocol as "TCP/IP" and open TCP/IP property. Set IP address and other settings as same
  • Hitachi CPX467 | Network Guide - Page 19
    .) NOTE • If the default setting in the projector is used, set the data as above into your PC. If an access point is used or any encryption mode is used, it is required to set the data that is matched to your system. Refer to the manuals for your PC or wireless LAN adapter or
  • Hitachi CPX467 | Network Guide - Page 20
    select one that meets your requirement. - Passcode connection - Profile data connection - History record connection - My Connection - Manual connection 3) Confirm the connection to your destination (&50) In some case, there are several projectors connected to the same network. Before you send your
  • Hitachi CPX467 | Network Guide - Page 21
    , Single PC mode and Multi PC mode. 1) Single PC mode The projector displays images sent by one PC. 2) Multi PC mode The projector screen is divided to 4 zones. The projector displays images in one zone sent by a PC, so that the projector can displays images sent by up to 4 PCs at the same time
  • Hitachi CPX467 | Network Guide - Page 22
    3. Using the Live Mode 3.1 Outline of the Live Mode (continued) 3.1.2 Presenter mode In the Single PC mode, the projector can be occupied by one PC and can block an access from any other PC, if the Presenter mode is selected in the "Live Viewer 3".
  • Hitachi CPX467 | Network Guide - Page 23
    VISTA, use the latest "Live Viewer 3". Please get the latest version at Hitachi WEB site (http://hitachi.us/digitalmedia or http://www. hitachidigitalmedia.com). Since some functions maybe limited, please see the instruction manual that is supplied with the latest "Live Viewer 3". • Set your PC
  • Hitachi CPX467 | Network Guide - Page 24
    applications. 3) Insert the accompanying CD-ROM into the PC's CD-ROM drive. NOTE • After sequence 3), the User Account Control (UAC) dialog will Location dialog appears. Press [Next]. NOTE • The C:\Program Files\Projector Tools\ LiveViewer3 folder will be created and the program will be installed
  • Hitachi CPX467 | Network Guide - Page 25
    you have. If the version is not matched with the projector, the software will not work properly. Live Viewer Version CP-X267 Models CP-X268A CP-X608 CPX2 CP-X308 CP-X417 CP-X467 CP-X807 CP-X809W 2.01 ™ Í Í Í 2.1x Í ™ ™ Í 2.20 Í ™ ™ Í 3.xx Í ™ ™ ™ • "x" in the version means
  • Hitachi CPX467 | Network Guide - Page 26
    that meets to your system. The explanation here is Projector Tools" → "Live Viewer 3" on Windows XP menu. Then, proceed to the item 3.3.2 Selecting the connection mode. (&27) [trouble projector will display XGA(1024x768) portion from top left corner of your PC screen. • Refer to the user manual
  • Hitachi CPX467 | Network Guide - Page 27
    LAN adapters in your PC are shown in the list. • If the wired LAN is selected, the wired LAN adapters in your PC are shown. [trouble shooting] n Are you sure that you want to turn on the network adapter? The screen is displayed in the case that the selected network adapter
  • Hitachi CPX467 | Network Guide - Page 28
    . • To turn it disabled(Off), click [Yes]. • Not to turn it disabled(Off), click [No], but the projector may not be able to communicate with your PC through the network. • If you put a check mark in the [Allow into you PC, make the firewall function invalid with following the user's manual. 28
  • Hitachi CPX467 | Network Guide - Page 29
    may be varied. If you like to use the My Connection, set the DHCP off in the projector. • If no profile data is assigned to the My Connection, it can't be used. [trouble shooting] n A network connection could not be established. Windows prevented network configuration changes. You may log in the
  • Hitachi CPX467 | Network Guide - Page 30
    3. Using the Live Mode 3.3 Quick connection to the network (continued) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the 3.6 Confirm
  • Hitachi CPX467 | Network Guide - Page 31
    of the history data from the list. • Configure Network Settings Manually Proceed to the item 3.5.3 Configuring manually (&43) If you need to make the setting manually, select [Configure Network Settings Manually]. Select From List Before selecting this item, your PC and the projectors need to be
  • Hitachi CPX467 | Network Guide - Page 32
    1234-5678-9ABC The Passcode is given on the projector screen. NOTE • The Passcode system does not work under the condition below. If your system meets one of them, set the connection manually. 1) Any encryption code is used. The Passcode system does not work with an encryption code. 2) Unique SSID
  • Hitachi CPX467 | Network Guide - Page 33
    to display the INFORMATION. 6) The Passcode is appeared at the top right corner in the INFORMATION window. NOTE • Take the Method 2 , when you use the projector in the LIVE MODE or PC-LESS Presentation mode, or when the MIU is not selected as the input signal. • If no communication between the
  • Hitachi CPX467 | Network Guide - Page 34
    . If the manual setting screen is displayed, please follow the item 3.4.3. [trouble shooting] n Incorrect PassCode. The incorrect Passcode was input. Click [Back] to return to the "Please enter the PassCode" screen. Check the PassCode on the projector screen (32) and enter the code again. 34
  • Hitachi CPX467 | Network Guide - Page 35
    item 3.3.1 Starting the "Live Viewer 3". (26) n Automatic connection failed. The reason is that the IP address set in the projector is the global address. Following the instruction by the network administrator, set the IP address and Subnet mask in the "Live Viewer 3". After input these address
  • Hitachi CPX467 | Network Guide - Page 36
    . Click on the main menu to go back to the item 3.3.3 Connecting to the network. (&31) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the
  • Hitachi CPX467 | Network Guide - Page 37
    the connection to your destination. (50) *1 To find the network setting on the projector, refer to the NOTE. (40) *2 If you don't use the factory default SSID, you need to set your SSID by either entering manually or selecting from the list of detected SSID. *3 If you use an encryption, you
  • Hitachi CPX467 | Network Guide - Page 38
    encryption, you need to set it. Contact the network administrator to check the encryption key that is set in the projector. The encryption key is always shown as 3 To find the network setting on the projector, refer to the NOTE. (40) *4 If you use Subnet mask except Class A/B/C, please set it. 38
  • Hitachi CPX467 | Network Guide - Page 39
    the connection to your destination. (50) *1 To find the network setting on the projector, refer to the NOTE. (40) *2 If you don't use the factory default SSID, you need to set your SSID by either entering manually or selecting from the list of detected SSID. *3 If you use an encryption, you
  • Hitachi CPX467 | Network Guide - Page 40
    appeared. Please set the Subnet mask. NOTE • If you require the network setting information on the projector, take the following procedure to find it out. 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the buttons
  • Hitachi CPX467 | Network Guide - Page 41
    . • Profile (below) • History (42) • Configure Network Settings Manually (43) 3. Using the Live Mode 3.5.1 Profile connection Selecting a profile data connect the network with the projector. It is required to store the profile data in advance. (60) 1) Select [Profile]. 2) Choose a profile
  • Hitachi CPX467 | Network Guide - Page 42
    record among the 10 will be overwritten. • The data & time information in each history record is renewed when the network is connected by using the history record. • If the DHCP is set on in the projector, the network connection between the projector and PC may not be established since IP address
  • Hitachi CPX467 | Network Guide - Page 43
    All setting for the network connection between the projector and PC is input manually. Select [Configure Network Settings Manually]. 3. Using the Live Mode The information to be input manually is different, depending on how you want to connect the projector and PC. Wireless LAN The required
  • Hitachi CPX467 | Network Guide - Page 44
    3. Using the Live Mode 3.5 Manual configuration (continued) Direct connection between the projector and PC (AdHoc mode) 1) Enter the following information that is set in the projector. *1 SSID: wireless (example) Encryption: WEP64bit (example) Encryption key *2 example) Mode: AD-HOC 2) Click [Next
  • Hitachi CPX467 | Network Guide - Page 45
    3. Using the Live Mode 3.5 Manual configuration (continued) The projector connected to an access point by a LAN cable 1) The : INFRASTRUCTURE 2) Click [Next]. 3) Enter the following information that is set in the projector. *3 IP address : 192.168.1.10 (example) Subnet mask: 255.255.255.0 (example
  • Hitachi CPX467 | Network Guide - Page 46
    3. Using the Live Mode 3.5 Manual configuration (continued) The projector connected to an access point by the wireless LAN 1) : INFRASTRUCTURE 2) Click [Next]. 3) Enter the following information that is set in the projector. *3 IP address : 192.168.1.10 (example) Subnet mask: 255.255.255.0 (example
  • Hitachi CPX467 | Network Guide - Page 47
    3.5 Manual configuration (continued) Wired LAN 1) Enter the following information for the projector. *1 IP address : 192.168.1.10 (example) Subnet mask (50) *1 To find the network setting on the projector, refer to the NOTE. (40) [trouble shooting] n A network connection could not be established.
  • Hitachi CPX467 | Network Guide - Page 48
    3. Using the Live Mode 3.5 Manual configuration (continued) n Automatic connection failed. The reason is that the IP address set in the projector is the global address. Following the instruction by the network administrator, set the IP address and Subnet mask in the "Live Viewer 3". After input
  • Hitachi CPX467 | Network Guide - Page 49
    3. Using the Live Mode 3.5 Manual configuration (continued) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click [Yes]. Proceed to the 3.6 Confirm
  • Hitachi CPX467 | Network Guide - Page 50
    . If you wish to use the current connection setting as a profile data for My Connection, check in the box for [Register this setting to My Connection]. [trouble shooting] n This projector is currently in use (Presenting) by another user. The projector you want to send your images to is occupied by
  • Hitachi CPX467 | Network Guide - Page 51
    3. Using the Live Mode 3.6 Confirm the connection to your destination (continued) n A Slideshow is currently running on the projector that you are trying to display to. The projector you want to send your images to is in the Slide show mode in the PC-LESS Presentation. • Click [Yes], then the
  • Hitachi CPX467 | Network Guide - Page 52
    , and retry the connection from the item 3.3 Quick connection to the network. (26) [trouble shooting] n The network connection is refused. The Projector has already reached the maximum number of Network Connections. The projector can connect up to 5 PCs at the same time. Click [OK], then the "Live
  • Hitachi CPX467 | Network Guide - Page 53
    select the LIVE MODE, and push the ► cursor button or ENTER button. (Refer to MIU menu in the User's Manual - Operating Guide) From MY BUTTON function 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the buttons on the
  • Hitachi CPX467 | Network Guide - Page 54
    the settings and operate the functions to send your images to the projector in the Live Mode. 3.7.1 Main menu and Operating buttons 1) Menu 2) Operating buttons q S tarting Capture button The transmission to the projector is started and the images will be displayed in the Live Mode. The
  • Hitachi CPX467 | Network Guide - Page 55
    screen is temporally frozen. The last image before the button is clicked is remained on screen. You can revise the image data on your PC without showing it on the projector's screen. r D isplay mode button (57) The button switches the Single PC mode and Multi PC mode. t Connect button The screen
  • Hitachi CPX467 | Network Guide - Page 56
    , but the image transmissions on hold. The network connection is established and the images on the PC are being sent to the projector. The network connection to the projector is disconnected. 2) Status Display in Multi PC mode The icon is displayed at the right end of the Display mode buttons. One
  • Hitachi CPX467 | Network Guide - Page 57
    NOTE • The image transmission will be stopped, when you click the Single mode button while the projector is in the Single PC mode or you click one of the Multi mode buttons that shows the will be active. (Refer to MIU menu in the User's Manual - Operating Guide for the function on the projector.) 57
  • Hitachi CPX467 | Network Guide - Page 58
    is worse. Image quality Image quality takes priority over Speed. It makes JPEG compression rate lower. The screen on the projector is rewritten slower because the transferred data is larger, but the image quality is better. w C ursor Emulation If a mouse cursor (pointer) on your PC screen is not
  • Hitachi CPX467 | Network Guide - Page 59
    3" (continued) e P resenter Mode In the Single PC mode, the projector can be occupied by one PC and can block an access from any displayed on the projector screen, so you can find out whose image is currently on the screen. (Refer to MIU menu in the User's Manual - Operating Guide) If the check
  • Hitachi CPX467 | Network Guide - Page 60
    connect the projector and PC can be stored as a profile data. Once the data is stored, all you need to do is to select the data to connect to the network. It is recommended when the same network connection is often used. 3.8.2 Making Profile data The profile data is made on the Manual Configuration
  • Hitachi CPX467 | Network Guide - Page 61
    3.8 Profile data (continued) 3.8.3 Editing Profile data If necessary, the profile data can be edited on the Manual Configuration screen. (41) 1) Select [Profile], and select one of the data listed in the window. 2) Click [Edit]. 3. Using the Live Mode 3) The "Edit profile" screen will come up.
  • Hitachi CPX467 | Network Guide - Page 62
    the My Connection is shown with a check mark in the list. 3) Select one of the profile data listed in the window and put a mark in the check box. The data selected before is turned unmarked. 4) Click [OK], then the window is closed. If you don't want to select a new one, click [Cancel
  • Hitachi CPX467 | Network Guide - Page 63
    is established, the "Connection to Projector successful" screen is displayed. (50) If you wish to use the current connection setting for My Connection, check in the box for [Register this setting to My Connection]. And then, if it is okay to overwrite the present data for My Connection, click [OK
  • Hitachi CPX467 | Network Guide - Page 64
    is equipped with the following network functions by using a web browser software. Configuring and controlling the projector via a web browser You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (67) E-mail
  • Hitachi CPX467 | Network Guide - Page 65
    in your web browser configuration, you must enable JavaScript in order to use the projector web pages properly. See the Help files for your web browser for details Internet Explorer on a Microsoft Windows version prior to Windows XP Service Pack 2 install security update Q832894 (MS04-004) or the
  • Hitachi CPX467 | Network Guide - Page 66
    following chart describes the differences between Administrator and User IDs. Item Description Network Information Displays the projector's current network configuration settings. Network Settings Displays and configures network settings. Port Settings Displays and configures communication
  • Hitachi CPX467 | Network Guide - Page 67
    via a web browser (Continued) 4.1.1 Logon Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser and press "Enter" key
  • Hitachi CPX467 | Network Guide - Page 68
    table. (66, 67) Displays the projector's current network configuration settings. Item Projector Name DHCP IP Address Subnet Mask Default wireless network card is mounted. (MIU menu in the User's Manual - Operating Guide) Firmware Date Firmware Version Displays the network firmware time stamp.
  • Hitachi CPX467 | Network Guide - Page 69
    Configures the subnet mask when DHCP is disabled. Configures the default gateway when DHCP is disabled. Configures the name of the projector. The length of the Projector Name can be up to 64 alphanumeric characters. Only alphabets, numbers and following symbols can be used and space Configures the
  • Hitachi CPX467 | Network Guide - Page 70
    speed) Encryption WEP Key WPA Passphrase SSID Select communication speed. Select data encryption method. Input WEP key, which has same length defined Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server
  • Hitachi CPX467 | Network Guide - Page 71
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.4 Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control Port2 (Port:
  • Hitachi CPX467 | Network Guide - Page 72
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.5 Mail Settings Displays and [Send Test Mail]. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. 72
  • Hitachi CPX467 | Network Guide - Page 73
    75) Lamp time over Alarm Time setting. Filter time over Alarm Time setting. Transition Detector Alarm. (OPTION menu in the User's Manual - Operating Guide) The power switch is turned on. (Off → standby mode) The SNMP access is detected from the invalid SNMP community. Refer to "Troubleshooting" in
  • Hitachi CPX467 | Network Guide - Page 74
    displayed on the projector screen. The e-mail will be sent when the filter timer exceeds 500, 1000, 1500 or 2000 hours based on the configuration. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN OFF. (OPTION menu in the User's Manual - Operating Guide) • Lamp Time Alarm is
  • Hitachi CPX467 | Network Guide - Page 75
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.7 Schedule Settings Displays and configures schedule settings. Item Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday Specific date No.1 Specific date
  • Hitachi CPX467 | Network Guide - Page 76
    input switching. Configures the parameters for display of transfered image data (96). Click [Register] button to add new commands to from the schedule list. NOTE • After the projector is moved, check the date and time set for the projector before configuring the schedules. Strong shock may make
  • Hitachi CPX467 | Network Guide - Page 77
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.8 Date/Time Settings Displays and configures the date and time settings. Item Current Date Current Time Daylight Savings Time Start Month
  • Hitachi CPX467 | Network Guide - Page 78
    Date and Time information from the SNTP server (hour:minute). Click [Apply] button to save the settings. NOTE • If you connect the projector to an existing network, consult a network administrator before setting server addresses. • To enable the SNTP function, the time difference must be set
  • Hitachi CPX467 | Network Guide - Page 79
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.9 Security Settings Displays and configures passwords and other security settings. Item Administrator authority Administrator ID Administrator Password Re-enter Administrator
  • Hitachi CPX467 | Network Guide - Page 80
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Description Network Control Configures the Authentication password for the command control. Authentication Password Configures the Authentication password. The length of
  • Hitachi CPX467 | Network Guide - Page 81
    the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button. Controls the projector. Item Main Power Input Source not reach to maximum setting value. Select MY IMAGE data. Delete MY IMAGE data. Adjusts the brightness setting. Adjusts the contrast setting.
  • Hitachi CPX467 | Network Guide - Page 82
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Description Image Aspect Selects the aspect setting. Over Scan Adjusts the over scan setting. V Position Adjusts the vertical position. H Position
  • Hitachi CPX467 | Network Guide - Page 83
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) Item Audio Volume Speaker Audio-Computer1 Audio-Computer2 Audio-HDMI Audio-MIU Audio-Component Audio-S-Video Audio-Video Audio Out Standby
  • Hitachi CPX467 | Network Guide - Page 84
    on/off. Turns the automatic keystone distortion correction function on/off. Turns the auto on function on/off. Configures the timer to shut off the projector when no signal is detected. Assigns the functions for the MY BUTTON-1 button on the included remote control. Assigns the functions for the MY
  • Hitachi CPX467 | Network Guide - Page 85
    via a web browser (Continued) The Service item in the Projector Control menu is shown only when you logon with the Administrator ID. The items shown in the table below can be performed using the Projector Control menu. Click [Quit Presenter Mode]. Item Service Quit Presenter Mode Description Quit
  • Hitachi CPX467 | Network Guide - Page 86
    's remote control and via your Web browser at the same time. It may cause some operational errors in the projector. The functions on the bundled remote control are assigned to the Web Remote Control screen. Item POWER COMPUTER VIDEO BLANK FREEZE MUTE MENU UP DOWN
  • Hitachi CPX467 | Network Guide - Page 87
    onto the "Thumbnail mode". Selecting this item sets the projector onto the "Slide Show mode". Selecting this item sets the projector onto the "Directory mode". NOTE • The Web Remote Control does not support repeat function that performs an action while holding a button clicked down. • Since
  • Hitachi CPX467 | Network Guide - Page 88
    4. Management with Web browser software 4.1 Configuring and controlling the projector via a web browser (Continued) 4.1.12 Projector Status Displays and configures the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze Description
  • Hitachi CPX467 | Network Guide - Page 89
    connection in order to activate new configuration settings. NOTE • Restarting requires you to re-log on in order to further control or configure the projector via a web browser. Wait 10 seconds or more after clicking [Restart] button to log on again. • The Logon menu (67) is displayed after
  • Hitachi CPX467 | Network Guide - Page 90
    's e-mail alert function, please configure the following items through a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and password
  • Hitachi CPX467 | Network Guide - Page 91
    ] button to save the settings. Failure/Warning e-mails are formatted as follows: Subject line : Text : Date Time IP Address MAC Address
  • Hitachi CPX467 | Network Guide - Page 92
    . NOTE • It is recommended that SNMP functions be carried out by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings (71) Configure the following items via a web browser to use SNMP. Example: If the IP address of the
  • Hitachi CPX467 | Network Guide - Page 93
    software 4.4 Event Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be "self-management" projector. NOTE • You can schedule the following control events: Power ON/OFF, Input Source and Transferred Image Display. • The power on / off
  • Hitachi CPX467 | Network Guide - Page 94
    for approx. 3 seconds when at least 1 "Power ON" schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The schedule function does not work when the power switch is turned off, [O] or
  • Hitachi CPX467 | Network Guide - Page 95
    setting can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the battery by following the instructions on replacing the battery. (Replacing the internal clock battery in the User's Manual (concise)) • The
  • Hitachi CPX467 | Network Guide - Page 96
    Refer to the manual for the application for instructions. To display the transferred image, select the MY IMAGE item in the MIU menu. For more information, please see the description of the MY IMAGE item of the MIU menu. ( MIU menu in User's Manual - Operating Guide) NOTE • Supported file types are
  • Hitachi CPX467 | Network Guide - Page 97
    TCP #9715 Command Control Settings (71) Configure the following items from a web browser when command control is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and
  • Hitachi CPX467 | Network Guide - Page 98
    4. Management with Web browser software 4.6 Command Control via the Network (Continued) When the authentication setting is enabled, the following settings are required. (79) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. *
  • Hitachi CPX467 | Network Guide - Page 99
    ) Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However, the following reply will be sent back in the event of authentication failure when
  • Hitachi CPX467 | Network Guide - Page 100
    > Reply 0x06 Reply 0x15 Connection ID 1 byte Connection ID 1 byte Reply 0x1C Error code 2 bytes Reply Data 0x1D 2 bytes Reply Status code 0x1F 2 bytes Reply 0x1F Authentication Error code 0x04
  • Hitachi CPX467 | Network Guide - Page 101
    type authentication with an MD5 (Message Digest 5) algorithm. When the projector is using a LAN, a random 8 bytes will be returned if authentication is enabled. Bind this received 8 bytes and the Authentication Password and digest this data with the MD5 algorithm and add this in front of the
  • Hitachi CPX467 | Network Guide - Page 102
    PC-LESS Presentation The PC-LESS Presentation reads image data from storage media inserted into SD CARD slot or USB STORAGE port and displays the image on the following modes. The PC-LESS Presentation can be operated on the OSD menu in the projector screen or via a web browser software in your
  • Hitachi CPX467 | Network Guide - Page 103
    Supported storage media] • SD memory card • USB memory (USB memory type, USB hard disk and USB card reader type) NOTE • USB memory reader (adapter) that has more than 1 USB slot is not supported Manual (concise)) [Supported format] • FAT12, FAT16 and FAT32 NOTE • NTFS is not supported. [Supported
  • Hitachi CPX467 | Network Guide - Page 104
    JEPG or other supported files (103) into root directory in a SD or USB storage media. 2) Insert the SD memory card into the SD card slot on the projector or the USB memory into the USB STORAGE port on the projector. (& Using a USB storage/Using an SD card in the User's Manual (concise)) 3) Press
  • Hitachi CPX467 | Network Guide - Page 105
    screen. from a web browser software 1) Save JEPG or other supported files (&103) into root directory in a SD or USB storage media. projector or the USB memory into the USB STORAGE port on the projector. (& Using a USB storage/Using an SD card in the User's Manual (concise)) 3) Connect the projector
  • Hitachi CPX467 | Network Guide - Page 106
    keypad or a web browser software. The following functions can be supported while the thumbnail is displayed. The remote control PAGE UP PAGE DOWN PC-LESS PRESENTATION menu * These operations are not accessible while the projector OSD menu is displayed. NOTE • The Thumbnail mode shows 12 pictures
  • Hitachi CPX467 | Network Guide - Page 107
    PC-LESS PRESENTATION menu will be displayed. 2) REFLESH: Move the cursor to the REFLESH, and push the ► cursor button on the remote control or projector, or [RIGHT] on the Web Remote Control. Then, the warning message for the REFRESH will be displayed. The Refresh is a function to initialize the
  • Hitachi CPX467 | Network Guide - Page 108
    Tree View. Full screen display Fig. 5.3 Full Screen Mode The following functions can be supported in the Full screen mode. Button operation *1) The remote control The keypad on the projector Web Remote in web browser software. Functions ▲/▼ or ◄/► *2) ▲/▼ or ◄/► *2) UP/DOWN or LEFT/RIGHT
  • Hitachi CPX467 | Network Guide - Page 109
    5. PC-LESS Presentation 5.3 Full Screen Mode (continued) You can display the image file with your desired size. 1) Select the DISPLAY SIZE in PC-LESS PRESENTATION menu. 2) Press the ENTER button on the remote control or ► button on the Keypad or RIGHT button on the Web Remote Control. 3) Then
  • Hitachi CPX467 | Network Guide - Page 110
    . NOTE • It is impossible to change the input port by the INPUT button if the THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed. • Display the projector OSD menu before changing the input port . • Images can be displayed when it is recorded in the playlist. • Image can not be displayed in the
  • Hitachi CPX467 | Network Guide - Page 111
    5. PC-LESS Presentation 5.4 Slide Show Mode (continued) You can play the Slide show at your desired configuration. Configure the SLIDE SHOW items in THUMBNAIL. 1) START # : Set the beginning number of the Slide show. 2) STOP # : Set the end number of the Slide show. 3) INTERVAL : Set the
  • Hitachi CPX467 | Network Guide - Page 112
    Directory Tree View You can display the directory with the projector menu. Select the DIRECTORY on the PC-LESS PRESENTATION menu. flame is displayed as preview. No preview is displayed if a folder or un-supported format file is selected. If the displayable file is selected and the ENTER button on
  • Hitachi CPX467 | Network Guide - Page 113
    . Displays a selected file as a preview in full screen. The un-supported format file cannot be opened. If the preview is displayed and Enter button Thumbnail Mode. Displays the menu. * These operations are not accessible while projector OSD menu is displayed. NOTE • It is not possible to change the
  • Hitachi CPX467 | Network Guide - Page 114
    ("MP4 Movie") - Time stamp (When file is created) - File size (Size of File) - Movie size (File resolution) - Movie time (Play time) Un-supported format file - File format ("File") - Time stamp (When file is created) - File size (Size of File) Directory - File format ("Directory") - Time stamp
  • Hitachi CPX467 | Network Guide - Page 115
    5. PC-LESS Presentation 5.6 "PC-LESS Presentation" error message Error message is displayed at a specific condition while "PC-LESS Presentation" mode. It appears at the bottom and the gray area of screen. Fig. 5.6 "PC-LESS Presentation" error message "PC-LESS Presentation" error message list
  • Hitachi CPX467 | Network Guide - Page 116
    5. PC-LESS Presentation 5.7 Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files or moving image files in the thumbnail or the slide show. The playlist file name is "imagelistdir.txt". It is created in each folder when the PC-LESS Presentation is
  • Hitachi CPX467 | Network Guide - Page 117
    Troubleshooting Live Mode Wireless / Wired Problem No image The projector that you want to connect to is nowhere to be found on the list of available projectors Can't communicate Likely Cause Things to Check Reference Page Number The projector is not turned on. Is the projector's lamp manual
  • Hitachi CPX467 | Network Guide - Page 118
    Troubleshooting 6. Troubleshooting (Continued) Problem Likely Cause Things to Check Reference Page Number The projector send PC screen data while using Using Photo manual in detail. - Live Mode Wireless / Wired PC-Projector network connection PC-Projector not support these features of Windows
  • Hitachi CPX467 | Network Guide - Page 119
    - The projector does not respond - Image on screen is frozen. Communication between the projector and PC is not working well. MIU Functions of the projector is not working well. Try "MIU RESTART" in SERVICE menu under the MIU menu. 11-14, 41 *11 *63 * User's Manual - Operating Guide 119
  • Hitachi CPX467 | Network Guide - Page 120
    PSK/PSK2 (TKIP/AES), SSID OS: W indows 2000 Professional (Service Pack4) Windows XP Home Edition Windows XP Professional Windows Vista Home case of XP Video RAM: 4MB required (8MB recommended) HDD: 20MB CD-ROM drive Web browser: Internet Explorer 5.5 or later SD Memory Card (Corresponding card is
  • Hitachi CPX467 | Network Guide - Page 121
    and after-sales service 8. Warranty and after-sales service If a problem occurs with the equipment, please read "6. Troubleshooting" (117) section first and review all suggested check points. After that, please contact your dealer or service company, if you still have the problem. They will tell
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
1
Projector
CP-X467
User's Manual (detailed)
Network Guide
Thank you for purchasing this projector.
This projector has the network function that brings you the following main features.
►Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
ü
Live Mode
This projector can project your PC images on screen through wireless or wired
network, which can erase a signal cable from your desk.
ü
Quick connection to your network
No expert knowledge is required any more. Various options for network setting
give you a quick and simple connection to the network.
ü
Web control
The projector can be controlled and monitored by a web browser software on
your PC, which can help you to setup and maintain the projector.
ü
PC-LESS Presentation
This projector can project images stored in an SD memory or a USB memory
on screen, which allow you not to bring your PC with you.
This manual is only intended to explain Network functions only.
For safety, operations or any other issues, refer to the Safety Guide and User’s
Manual (concise and detailed).
• Microsoft and Internet Explorer, Windows, Windows NT, Windows Me, Windows
Vista are registered trademark of Microsoft Corporation.
• Apple and Macintosh, Mac, Mac OS are registered trademarks of Apple Inc.
• Pentium is a registered trademark of Intel Corporation.
• JavaScript is a registered trademark of Sun Microsystems, Inc.
• DVI is a trademark of Digital Display Working Group.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
All other trademarks are the properties of their respective owners.