Hitachi CPX608 User Manual
Hitachi CPX608 - XGA LCD Projector Manual
 |
UPC - 050585151031
View all Hitachi CPX608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CPX608 manual content summary:
- Hitachi CPX608 | User Manual - Page 1
Projector CP-X608 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future - Hitachi CPX608 | User Manual - Page 2
Regarding the indicator lamps. . . . . 66 Using the magnify feature 22 Phenomena that may be easy Freezing the screen 22 to be mistaken for machine defects. . 68 Temporarily blanking the screen. . . 23 Warranty and after-service. . . . 71 Using the menu function 24 Specifications 71 EASY - Hitachi CPX608 | User Manual - Page 3
projected image from even a short distance. Preparations Contents of package Please see the "Contents of package" in the "User's Manual (concise)" which is a book. Your projector moving the projector. Use special caution for the lens. SU03921 LENS SUPPORT CP-X505, CP-X605 and CP-X608 Fastening the - Hitachi CPX608 | User Manual - Page 4
it is too hot. ►Do not look into the lens or vents while the lamp is on, since the strong light is not good for your eyes. ►Do not grab the front cover to hold the projector up, since the projector may drop down. ►Do not handle the elevator knobs without holding the - Hitachi CPX608 | User Manual - Page 5
INPUT button (18) (4) POWER indicator (17) (5) TEMP indicator (66) (6) LAMP indicator (66) Rear panel (1) Shutdown switch (68) (2) Security slot (9) to prevent the projector from falling down, since it is not designed for it. ►Use the shutdown switch only when the projector is not turned off - Hitachi CPX608 | User Manual - Page 6
Part names Remote control (7) (1) Laser pointer (14) It is a beam outlet. (4) (2) LASER INDICATOR (14) (3) LASER button (14) (4) STANDBY/ON button (17) (17) (5) VOLUME button (18) (6) MUTE button (18) (26) (7) VIDEO button (19) (8) RGB button (18) (11) (9) SEARCH button (19) - Hitachi CPX608 | User Manual - Page 7
into or stick to the vents on the bottom of the projector. This projector has some intake vents also on the bottom. ►Do not place the projector anyplace where it may get wet. Getting the projector wet or inserting liquid into the projector could cause fire, electric shock and/or malfunction of the - Hitachi CPX608 | User Manual - Page 8
for a full size screen: 1024×768 (a) Screen size (diagonal) (b) Projection distance (±10%) (c) Screen height (±10%), when the vertical lens shift ( (b) • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special - Hitachi CPX608 | User Manual - Page 9
(l3yNe.5.TΦrR)OtLo project at CONTROL a suitable angle to the screen, projector within 8 degrees. the Kensington lock. For details, see the manual of the security tool. WARNING ►Do not use the securLitAyN bar and the security slot to prevent the projector from falling down, since it is not designed - Hitachi CPX608 | User Manual - Page 10
your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are have to be of a specific length or equipped with a core. For cables with a core only at one end, connect the end with the core to the projector. ►Make sure that devices - Hitachi CPX608 | User Manual - Page 11
with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the - Hitachi CPX608 | User Manual - Page 12
slot cover. Replace the cover by reversing the procedure used when removing the cover. NOTE • When using the projector with a wired LAN, please remove the wireless network card. • Before removing the SD card or USB memory, be sure to perform the REMOVE procedure using the SERVICE menu under the - Hitachi CPX608 | User Manual - Page 13
slot cover lock. Setting up SD CARD SD CARD Connecting power supply 1. Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. AC inlet Connector of the power cord to the outlet WARNING ►Please use extra caution when - Hitachi CPX608 | User Manual - Page 14
laser beam at other people. The laser beam can cause vision problems. CAUTION ►Use of controls or adjustments or performance of procedures according to their plus and minus terminals as indicated in the remote control. 3. Replace the battery cover in the direction of the arrow and snap it back into - Hitachi CPX608 | User Manual - Page 15
as from an inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights. 20º frequency. Please remember that the "REMOTE FREQ." in SERVICE item of OPTION menu (47) of the projector to be controlled should be set to the same mode - Hitachi CPX608 | User Manual - Page 16
4 When the remote control signal is hard to reach surely to the projector in the environment, this function is following. - When an M1-D/USB cable connects this projector with a PC having a built- depending on the PC's configurations and mouse drivers. - Operating simultaneously two or more keys - Hitachi CPX608 | User Manual - Page 17
connected to the projector and the outlet SERVICE menu under the MIU menu if the SD card or USB memory is used (58). • When the AUTO ON of the OPTION menu is set to the TURN ON, and the power was turned off by the power switch last time, only turning the power switch on makes the projection lamp - Hitachi CPX608 | User Manual - Page 18
/BR) 1. Press the RGB button on the remote control to select an input port for the RGB signal. Each time you press the button, the projector switches its RGB input port as below. RGB 1 RGB 2 M1-D MIU LASER INDICATOR STANDBY/ON VIDEO RGB BLANK LASER ● If the RGB button is pushed - Hitachi CPX608 | User Manual - Page 19
input signal (continued) 1. Press the VIDEO button on the remote control to select an input for video signal. Each time you press the button, the projector switches its video input port as below. COMPONENT (Y, CB/RB, CR/BR) S-VIDEO VIDEO LASER INDICATOR STANDBY/ON VIDEO BLANK RGB LASER BLANK - Hitachi CPX608 | User Manual - Page 20
Operating Adjusting the zoom and focus 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. Adjusting the lens shift 2/5 1. Use the vertical lens shift dial to shift the picture upward or downward. 2. Use the horizontal lens shift dial to shift the picture - Hitachi CPX608 | User Manual - Page 21
07#. 2. Use the cursor buttons ▲/▼ to select AUTO or MANUAL operation, and press the button ► to perform the following. ESC MENU H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. ● - Hitachi CPX608 | User Manual - Page 22
ON is selected to the MESSAGE item of SCREEN menu (42)), and the projector will go into the FREEZE mode. ESC MENU RESET POSITION AUTO MAGNIFY ON BUTTON is pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave - Hitachi CPX608 | User Manual - Page 23
from the blank screen and return to the input signal screen, press the BLANK button again. ● The projector automatically returns to the input signal screen wheAnSPECoT ne of the projector's buttons or the remote control buttons is pressed or one PUSHENTER of the commands (except get commands) is - Hitachi CPX608 | User Manual - Page 24
MENU, select the EASY MENU. Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to select want to return to the previous display, press the cursor button ◄ on the projector or remote control, or the ESC button on the remote control. 5. Press - Hitachi CPX608 | User Manual - Page 25
can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. EASY Menu and COLOR TEMP settings. Choose a suitable mode according to the projected source. NORMAL ó CINEMA ó DYNAMIC WHITEBOARD ó BOARD(GREEN) ó - Hitachi CPX608 | User Manual - Page 26
EASY Menu EASY Menu (continued) Item BRIGHTNESS CONTRAST COLOR TINT SHARPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE Go to Advanced Menu... Description Using the ◄/► buttons adjusts the brightness. See the BRIGHTNESS item in PICTURE menu (27). Using the ◄/► buttons adjusts the contrast. See - Hitachi CPX608 | User Manual - Page 27
Select an item using the ▲/▼ cursor buttons on the +0276 5'672 7.6 %1.146'/2/+& projector or remote control, and press the ► cursor button #7&+1 5%4''0 %1.14 6+06 on the projector or remote control, or the ENTER button 126+10 /+7 5*#420'55 6+8'+4+567401(( on - Hitachi CPX608 | User Manual - Page 28
PICTURE Menu PICTURE Menu (continued) Item Description Using the ▲/▼ buttons switches the color temperature mode. HIGH DEFAULT � HIGH CUSTOM � MID DEFAULT � MID CUSTOM LOW DEFAULT � LOW CUSTOM � Hi-BRIGHT-1 DEFAULT � Hi-BRIGHT-1 CUSTOM Hi-BRIGHT-2 DEFAULT � Hi-BRIGHT-2 CUSTOM To adjust CUSTOM - Hitachi CPX608 | User Manual - Page 29
are selected. If this occurs select TURN OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting may be some noise and the screen may flicker for a moment when loading data. This is not malfunction. • The LOAD functions can be also performed by - Hitachi CPX608 | User Manual - Page 30
IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the - Hitachi CPX608 | User Manual - Page 31
IMAGE Menu (continued) IMAGE Menu Item H PHASE H SIZE AUTO ADJUST EXECUTE Description Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker. Right ó Left • This item can be selected only for an RGB signal, an MIU signal or a component video signal. (except 525i (480i), 625i ( - Hitachi CPX608 | User Manual - Page 32
the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button , the screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the - Hitachi CPX608 | User Manual - Page 33
/Pr) and VIDEO ports will function as a SCART RGB port. ALAN SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer. RGB OUT RGB1 RGB2 M1-D AUDIO IN 1 AUDIO IN 2 VIDEO Y CB/PB CR/PR REMOTE S-VIDEO R L R AUDIO L OUT CONTROL - Hitachi CPX608 | User Manual - Page 34
INPUT Menu INPUT Menu (continued) Item FRAME LOCK RGB IN Description Using the ▲/▼ buttons turns the frame lock function on/off. TURN ON ó TURN OFF • This item can be performed only on an RGB signal with a vertical frequency of 50 to 60 Hz. • When the TURN ON is selected, a moving pictures are - Hitachi CPX608 | User Manual - Page 35
INPUT Menu (continued) INPUT Menu Item RESOLUTION Description The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. 4'51.76+10 (2) - Hitachi CPX608 | User Manual - Page 36
some input, this function may not work well. • When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. • When the zoom adjustment is set to the TELE (telephoto focus), this function - Hitachi CPX608 | User Manual - Page 37
. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (52) will be displayed when projector is restarted after the power switch is turned off. 37 - Hitachi CPX608 | User Manual - Page 38
using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button response well beyond the low frequency limitations of the drivers. Adjust it depending on the user's preference. Using the ▲/▼ buttons turns the speaker - Hitachi CPX608 | User Manual - Page 39
SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the - Hitachi CPX608 | User Manual - Page 40
SCREEN Menu SCREEN Menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen - Hitachi CPX608 | User Manual - Page 41
SCREEN Menu SCREEN Menu (continued) Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this - Hitachi CPX608 | User Manual - Page 42
. • When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (22). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME - Hitachi CPX608 | User Manual - Page 43
). AUTO ON Using the ▲/▼ buttons turns on/off the AUTO ON function. TURN ON TURN OFF When AUTO ON is set to TURN ON, the projector's lamp will only be automatically turned on when the Power switch is turned on if the power was turned off using the Power switch the last - Hitachi CPX608 | User Manual - Page 44
the ► button of the projector displays a dialog. To reset the lamp time, select the RESET using the ▲ button. RESET ï CANCEL • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. • For the lamp replacement, see the section "Lamp" (59, 60). The - Hitachi CPX608 | User Manual - Page 45
current adjusted condition will be lost by loading a data. • PICTURE MODE: Changes the PICTURE MODE (25 VOLUME-: Set the volume down. Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the projector is noisier when the HIGH is selected. HIGH ó NORMAL - Hitachi CPX608 | User Manual - Page 46
as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not manually. GHOST 1. Select a color element of ghost using the ◄/► buttons. 2. A djust the selected element using the ▲/▼ buttons to disappear ghost. 4)$ )*156 SERVICE - Hitachi CPX608 | User Manual - Page 47
Item SERVICE (continued) Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and SECURITY are not reset. RESET ï CANCEL ( - Hitachi CPX608 | User Manual - Page 48
OPTION Menu OPTION Menu (continued) Item SECURITY Description This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons - Hitachi CPX608 | User Manual - Page 49
for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10 digit Inquiring Code will be displayed. • If there digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. SECURITY (continued) 2. Using the - Hitachi CPX608 | User Manual - Page 50
37+6 0':6 ENTER PASSWORD BOX (large) Code. Your PASSWORD will be sent after your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 3.1 Registering the PIN Code - Hitachi CPX608 | User Manual - Page 51
projector is restarted after Code. The projector can be projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector will activate only when the projector is started after the power Code is displayed the projector will turn off. 2+0$1: - Hitachi CPX608 | User Manual - Page 52
menu to display the input signal. If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off. 4.2 Setting the Transition Detector PASSWORD 4.2-1 Use the ▲/▼ buttons - Hitachi CPX608 | User Manual - Page 53
Code will be displayed inside the BOX. 4.4-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 64#05+6+10&'6'%614 '06'42#55914& +PSWKTKPI%QFG 37+6 0':6 ENTER PASSWORD BOX (large) 53 - Hitachi CPX608 | User Manual - Page 54
this projector may cause trouble on supported by "MIU Live Viewer". ( 1.1 Live Mode of the User's Manual - Network Functions) PC-LESS PRESENTATION Selecting this item displays the PC-LESS PRESENTATION menu. Using the menu is able to make the projector display the images stored in SD card or USB - Hitachi CPX608 | User Manual - Page 55
User's Manual - Network Functions) and the ► or ENTER button to display the image. G5*16 &'/10564#6+10 24'5'06#6+10(+.' &'/10564#6+10 6#$.' • Insert the SD memory card or USB memory into the projector image displayed and its source file in the SD card or USB memory (1) P ress the - Hitachi CPX608 | User Manual - Page 56
OFF. 2#&&4'55 • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the - Hitachi CPX608 | User Manual - Page 57
Use the ▲/▼ buttons to select the mode of the network communication system. Select it according to the setting of your PC. ADHOC INFRASTRUCTURE /1&' #&*1% +0(4#5647%674' CH Use the ▲/▼ buttons to select the channel %* of the wireless LAN while using it. Select it according to the setting - Hitachi CPX608 | User Manual - Page 58
"0.0.0.0" in the following condition. (1) The NETWORK MODE is set to the WIRELESSE and the wireless LAN SD card is not mounted. (2) DHCP is ON and the projector does not get address from DHCP server. Selecting this item displays the SERVICE menu. Use the ▲/▼ buttons to select an item, and the ► or - Hitachi CPX608 | User Manual - Page 59
out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number. Type number = DT00771 Replacing the lamp The lamp cover 1. Turn the projector off, and unplug the power cord. Allow the - Hitachi CPX608 | User Manual - Page 60
In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or - Hitachi CPX608 | User Manual - Page 61
indicators or a message prompts you to clean the air filter, comply with it as soon as possible. Note that the projector may shut down, when the projector heats too much. Please replace the air filter when it is damaged or too soiled. Preparation of a new air filter is recommended. To prepare a new - Hitachi CPX608 | User Manual - Page 62
when it is damaged or too soiled, and also when you replace the lamp. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or - Hitachi CPX608 | User Manual - Page 63
the projector over once more, so that the bottom faces up, and reload the battery correctly. • The internal clock's time will be reset when the battery is removed. Please reconfigure the time via the menu or a web browser after replacing the battery. ( 2.5.7 Date/Time Settings of the User's Manual - Hitachi CPX608 | User Manual - Page 64
sprays. CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with - Hitachi CPX608 | User Manual - Page 65
Troubleshooting Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions specs for your projector or the signal source specs. SERVICE item this manual FILTER - Hitachi CPX608 | User Manual - Page 66
Troubleshooting Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please follow the instructions within the table. If the same indication is displayed after the remedy, or if an - Hitachi CPX608 | User Manual - Page 67
Blinking in Green for approx. 3 seconds Turned off Turned off At least 1 "Power ON" schedule is saved to the projector. (Please refer to the User's Manual-Network Functions: Schedule Settings for more information.) NOTE • When the interior portion has become overheated, for safety purposes, the - Hitachi CPX608 | User Manual - Page 68
again, wait at least 10 minutes to make the projector cool down enough. 3. Some setting may be wrong. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (47) to reset all settings to factory default. Then, if the problem is not removed after the remedy, please contact your - Hitachi CPX608 | User Manual - Page 69
Troubleshooting Phenomena that may be easy to be mistaken for machine defects ( Adjust BRIGHTNESS to a higher level using the menu function or the remote control. The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play monitor using - Hitachi CPX608 | User Manual - Page 70
Troubleshooting Phenomena item in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal front is blocked by some objects. Remove any objects from front side of the projector. Reference page 26, 27 26, 37 59, 60 20, 31 64 4 - Hitachi CPX608 | User Manual - Page 71
the "Troubleshooting" and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied. Specification Item Product name Liquid Crystal Panel Panel size Drive system Pixels Lens Lamp - Hitachi CPX608 | User Manual - Page 72
319 Specifications Specifications (continued) 418 [unit: mm] 72 154 139
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
±
Projector
CP-X608
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING
►
Before using this product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted
without express written consent.
Trademark acknowledgment
• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
•
is a trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS Labs, Inc.
All other trademarks are the properties of their respective owners.