Hitachi iPJ-AW250N User Manual
Hitachi iPJ-AW250N Manual
 |
View all Hitachi iPJ-AW250N manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi iPJ-AW250N manual content summary:
- Hitachi iPJ-AW250N | User Manual - Page 1
Projector CP-AW250N User's Manual (detailed) Operating Guide (Type nos. CP-AW250N, CP-AW250NM) Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place - Hitachi iPJ-AW250N | User Manual - Page 2
power off, Usb type b, Lamp time, Power on/off 18 Filter time, My button, My source, Turning on the power 18 Service Turning off the power 19 NETWORK menu 64 Operating 20 Setup, Projector name, My image, Adjusting the volume 20 Amx d.d., Presentation, Information, Temporarily muting the - Hitachi iPJ-AW250N | User Manual - Page 3
short distance projection,which gives you more various way of use. ü The motorized lens door offers you very simple use of the projector. ü T he double layer filter Contents of package section in the User's Manual (concise) which is a book. Your projector should come with the items shown there. - Hitachi iPJ-AW250N | User Manual - Page 4
Introduction Part names Projector (1) Lamp cover (&89) The lamp unit is inside. (2) Control panel (&5) (3) Elevator feet (x 2) (&23) (4) Remote sensor (&16) (5) Lens (&94) (6) Intake vents (7) Filter cover (&91) The air filter and intake vent are inside. (8) Battery cover The internal clock - Hitachi iPJ-AW250N | User Manual - Page 5
indicator (&18, 98, 99) (4) TEMP indicator (&98, 99) (5) LAMP indicator (&98, 99) Buttons (6) FOCUS +/- buttons when no menu is Cursor ▲/▼ buttons when a menu is displayed (&28). The buttons on the projector work only as the cursor buttons while the template is displayed (&51). Ports - Hitachi iPJ-AW250N | User Manual - Page 6
Introduction Remote control (1) VIDEO button (&21) (2) COMPUTER button (&21) (3) SEARCH button (&22) (4) STANDBY/ON button (&18) (5) ASPECT button (&22) (6) AUTO button (&24) (7) BLANK button (&27) (8) MAGNIFY - ON button (&26) (9) MAGNIFY - OFF button (&26) (10) MY SOURCE/DOC.CAMERA button (&21, - Hitachi iPJ-AW250N | User Manual - Page 7
dealer or service personnel. • The projected image position and/or focus may change during warm-up (approx. 30 minutes after the lamp is turned on) or when the ambient conditions change. Readjust the image position and/or focus as necessary. • Since the projector features an ultra short throw, be - Hitachi iPJ-AW250N | User Manual - Page 8
mounting accessories the manufacturer specified, and leave installing and removing the projector with the mounting accessories to the service personnel. • Read and keep the user's manual of the mounting accessories used. CAUTION ►Avoid placing the projector in smoky, humid or dusty place. Placing - Hitachi iPJ-AW250N | User Manual - Page 9
the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and . After making sure that the device and projector are turned off, connect them following the instructions below. WARNING ►Use only the appropriate accessories - Hitachi iPJ-AW250N | User Manual - Page 10
port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted. - Please use the standard drivers in your computer as this projector is a Plug-andPlay monitor. • When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in COMPUTER IN of the INPUT - Hitachi iPJ-AW250N | User Manual - Page 11
supported by this projector. - Although the projector can display signals with resolution up to UXGA (1600X1200), the signal will be converted to the projector the computer's manual for the setting. • Depending on the input signal, the automatic adjustment function of this projector may take some - Hitachi iPJ-AW250N | User Manual - Page 12
AUDIO IN2 VIDEO CAUTION ►Before removing the USB storage device from the port of the projector, be sure to use the REMOVE USB function on the thumbnail screen to secure your away from the speaker. • This projector doesn't support plug-in power for the microphone. 12 (continued on next page) - Hitachi iPJ-AW250N | User Manual - Page 13
your devices (continued) To use network functions of the projector, connect the LAN port with the computer's LAN of the external device to communicate as a network terminal. See the User's Manual - Network Guide for details of the network functions. Access point Computer LAN RS-232C USB TYPE - Hitachi iPJ-AW250N | User Manual - Page 14
chain or wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. Anti-theft chain or wire Security slot Security bar WARNING ►Do not use - Hitachi iPJ-AW250N | User Manual - Page 15
parts as shown in figure, and assemble the cable cover. 3 3 1 1 2 2 3. Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure. Pass the cables through the holes on the bottom of the cable cover. 1 knobs 1 3 2 2 3 CAUTION ► Be careful not - Hitachi iPJ-AW250N | User Manual - Page 16
Installing the batteries Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. 3. Replace short projector - Hitachi iPJ-AW250N | User Manual - Page 17
SERVICE item of ESC RESET the OPTION menu (60) of the projector check your computer's manuals before connecting this product 's configurations and mouse drivers. This function can work projector is working properly. This function is not available in any of the following cases: - While the lamp - Hitachi iPJ-AW250N | User Manual - Page 18
the projection lens or mirror while ESC RESET the projection lamp lights, since the projection lamp ray may cause a trouble on your eyes. ►Be careful not to pinch your finger with the lens door, to prevent an injury. ►Do not place the projector vertically with the lens door open as shown in the - Hitachi iPJ-AW250N | User Manual - Page 19
about 10 minutes or more after turning it off. Also, do not turn the projector off shortly after turning it on. Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp. WARNING ►Be careful not to pinch your finger with the lens door, to prevent - Hitachi iPJ-AW250N | User Manual - Page 20
IN1 COMPUTER IN2 VIDEO LAN S-VIDEO HDMI USB TYPE A USB TYPE B ● W hile ON is selected for AUTO SEARCH item in OPTION menu (53), the projector will keep checking the ports in above order repeatedly till an input signal is detected. ● It may take several seconds to project the images from - Hitachi iPJ-AW250N | User Manual - Page 21
FOCUS + POSITION - D-ZOOM + MENU ESC ENTER RESET USB TYPE B port. 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below. HDMI S-VIDEO VIDEO ● While ON is selected for AUTO SEARCH item in OPTION menu - Hitachi iPJ-AW250N | User Manual - Page 22
ZOOM + MENU ENTER S-VIDEO HDMI USB TYPE A USB TYPE B ESC RESET ● While ON is selected for AUTO SEARCH item in OPTION menu (53), the projector will keep checking the ports in above order repeatedly till an input signal is detected. ● It may take several seconds to project the images from - Hitachi iPJ-AW250N | User Manual - Page 23
and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments. Front foot Rear foot - Hitachi iPJ-AW250N | User Manual - Page 24
pushing the MENU button on the projector. ● The buttons on the projector work only as the cursor buttons while the template is displayed (51). ● FOCUS +/- button on the projector is invalid when the USB TYPE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (58). 24 - Hitachi iPJ-AW250N | User Manual - Page 25
on the screen to aid you in correcting the distortion. 2. Use the ▲/▼ cursor buttons to select MANUAL or PERFECT FIT operation, and press the ► button to perform the following. (1) MANUAL displays a dialog for keystone correction. Use the ▲/▼ buttons to select KEYSTONE / KEYSTONE, then use the - Hitachi iPJ-AW250N | User Manual - Page 26
appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on, the MY SOURCE/ VIDEO COMPUTER DOC.CAMERA picture will be zoomed by 1.5 times as the input source. - A sync signal in the range not supported is input. - There is no input signal. 26 - Hitachi iPJ-AW250N | User Manual - Page 27
from the FREEZE mode when some control ENTER buttons are pressed. ESC RESET ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. ● Images might appear degraded when this - Hitachi iPJ-AW250N | User Manual - Page 28
VOLUME MUEP NU.＋ Each of these menus is operated using the same methods. While the projector DOWN is displaying any menu, the MENU button on the pOrFFojector works asーthe cursor item will appear. (3) Use the buttons as instructed in the OSD to operate the item. (continued on next page) 28 - Hitachi iPJ-AW250N | User Manual - Page 29
's the same as pressing the MENU button. Selecting this word returns the menu to the previous menu. Selecting this word cancels the operation in the present menu and returns to the previous menu. Selecting this word executes the prepared function or shifts the menu to the next menu. 29 - Hitachi iPJ-AW250N | User Manual - Page 30
EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item ASPECT D-ZOOM KEYSTONE KEYSTONE PERFECT FIT Description Using the ◄/► buttons switches the mode for aspect - Hitachi iPJ-AW250N | User Manual - Page 31
the ◄/► buttons switches the mode for mirror status. See the MIRROR item in SETUP menu (44). RESET FILTER TIME Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting the OK using the ► button performs resetting - Hitachi iPJ-AW250N | User Manual - Page 32
PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item BRIGHTNESS CONTRAST Description - Hitachi iPJ-AW250N | User Manual - Page 33
. (1) HDMI FORMAT item in the INPUT menu is set to VIDEO. (2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals. TINT Using the ◄/► buttons adjusts the tint. Reddish ó Greenish • This item can be selected only for a video, s-video - Hitachi iPJ-AW250N | User Manual - Page 34
for both bright and dark scenes. OFF : The active iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the - Hitachi iPJ-AW250N | User Manual - Page 35
(2) applies. (1) HDMI FORMAT item in the INPUT menu is set to VIDEO. (2) H DMI FORMAT item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals. (continued on next page) 35 - Hitachi iPJ-AW250N | User Manual - Page 36
IMAGE menu Item V POSITION H POSITION Description Using the ◄/► buttons adjusts the vertical position. Down ó Up • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting. Pressing the RESET button when - Hitachi iPJ-AW250N | User Manual - Page 37
the PC model. • The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (58). 37 - Hitachi iPJ-AW250N | User Manual - Page 38
INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description Using the ▲/▼ buttons - Hitachi iPJ-AW250N | User Manual - Page 39
INPUT menu Item VIDEO FORMAT Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 • This item is performed only - Hitachi iPJ-AW250N | User Manual - Page 40
INPUT menu Item COMPUTER IN FRAME LOCK Description The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. (2) U se the ◄/► buttons to select the computer input signal type. AUTO ó SYNC ON G OFF • Selecting the - Hitachi iPJ-AW250N | User Manual - Page 41
COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ and vertical (VERT) resolutions using CUSTOM ↓ the buttons. This function may not support all resolutions. (5) Move the cursor to OK on screen and press the - Hitachi iPJ-AW250N | User Manual - Page 42
SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item D-ZOOM D-SHIFT PICT. POSIT. H KEYSTONE - Hitachi iPJ-AW250N | User Manual - Page 43
Transition Detector is on (74). Using the ▲/▼ buttons turns on/off the AUTO ECO MODE. ON ó OFF AUTO ECO MODE • When ON is selected, the projector will always be set to Eco mode at start-up regardless of the ECO MODE (44) setting. An OSD message "AUTO ECO MODE" will be - Hitachi iPJ-AW250N | User Manual - Page 44
NORMAL ó ECO • When the ECO is selected, acoustic noise and screen brightness are reduced. • When AUTO ECO MODE (43) is set to ON, the projector will always be set to Eco mode at start-up regardless this setting. Using the ▲/▼ buttons switches the mode for mirror status. MIRROR NORMAL ó H:INVERT - Hitachi iPJ-AW250N | User Manual - Page 45
projected, the audio signal from the input port selected in step (2) is output to both the AUDIO OUT port and built-in speaker of this projector. However, the built-in speaker does not work when SPEAKER is set to OFF. (1) C hoose a picture input port using the ▲/▼ buttons. Choose STANDBY to select - Hitachi iPJ-AW250N | User Manual - Page 46
AUDIO menu Item HDMI AUDIO MIC LEVEL MIC VOLUME Description Using the ▲/▼ buttons switches the mode for the HDMI audio. Check each of the two modes provided and select the suitable one for your HDMI audio device. 1 ó 2 Using the ▲/▼ buttons switches the input level to match that of the microphone - Hitachi iPJ-AW250N | User Manual - Page 47
SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. SCREEN menu Item LANGUAGE MENU POSITION BLANK - Hitachi iPJ-AW250N | User Manual - Page 48
SCREEN menu Item MyScreen Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled " - Hitachi iPJ-AW250N | User Manual - Page 49
SCREEN menu Item MyScreen Lock MESSAGE Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON ó OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the - Hitachi iPJ-AW250N | User Manual - Page 50
SCREEN menu Item SOURCE NAME Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE - Hitachi iPJ-AW250N | User Manual - Page 51
SCREEN menu Item SOURCE NAME (Continued) TEMPLATE Description (6) The current name will be displayed on the first line. Use the buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the - Hitachi iPJ-AW250N | User Manual - Page 52
files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C. - Hitachi iPJ-AW250N | User Manual - Page 53
or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item is started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1 COMPUTER IN2 LAN - Hitachi iPJ-AW250N | User Manual - Page 54
max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO POWER OFF When the time is set to 0, the projector is not turned off automatically. When the time is set to 1 to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector lamp will be turned off - Hitachi iPJ-AW250N | User Manual - Page 55
the projector displays a dialog. To reset the lamp time, select the OK using the ► button. CANCEL OK • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. • For the lamp replacement, see the section "Replacing the lamp" (89). The filter time - Hitachi iPJ-AW250N | User Manual - Page 56
menu (67). • MESSENGER: Turns the messenger text displayed on the screen on/off (Messenger Function in the User's Manual - Network Guide). When there is no transferred text data to display, the message "NO MESSENGER DATA" appears. • INFORMATION: Displays SYSTEM_INFORMATION, INPUT_INFORMATION - Hitachi iPJ-AW250N | User Manual - Page 57
SOURCE Description • ACTIVE IRIS: Changes the active iris mode. • PICTURE MODE: Changes the PICTURE MODE (31). • F ILTER RESET: Displays the filter time reset confirmation dialogue (55). • TEMPLATE: Makes the template pattern selected to the TEMPLATE item (51) appear or disappear. • AV MUTE - Hitachi iPJ-AW250N | User Manual - Page 58
, and make adjustment manually. GHOST 1. Select a color element of ghost using the ◄/► buttons. 2. Adjust the selected element using the ▲/▼ buttons to disappear ghost. FILTER MESSAGE Use the ▲/▼ button to set the timer for notifying by the message when to replace the filter unit 500h ó 1000h - Hitachi iPJ-AW250N | User Manual - Page 59
LENS DOOR CLOSE function to temporarily close the lens door when LENS DOOR LOCK is set to ON. Note that the lamp will be turned off when the lens door is closed. Press the STANDBY/ON button on the projector or the remote control to open the lens door and start the - Hitachi iPJ-AW250N | User Manual - Page 60
SERVICE (continued) Description REMOTE FREQ. (1)Use the ▲/▼ button to change the projector's remote sensor frequency setting (4, 17). 1:NORMAL ó 2:HIGH (2)Use the ◄/► button to change the projector of serial communication, refer to the User's Manual - Network Guide. (continued on next page) 60 - Hitachi iPJ-AW250N | User Manual - Page 61
it is required to control an external device as a network terminal, via this projector from the computer. The CONTROL port doesn't accept RS-232C commands (Network Bridge Function in the User's Manual - Network Guide) OFF: Select this mode to receive RS-232C commands using the CONTROL port. • OFF - Hitachi iPJ-AW250N | User Manual - Page 62
through the CONTROL port. OFF ó 1s ó 2s ó 3s SERVICE (continued) OFF: Select this mode if it is not required to check the responses from the device that the projector COMMUNICATION (continued) sends data to. In this mode, the projector can send out data from the computer continuously. 1s /2s - Hitachi iPJ-AW250N | User Manual - Page 63
a dialog titled "INPUT_INFORMATION". It shows the information about the current input. SERVICE (continued) • The "FRAME LOCK" message on the dialog means the setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, FILTER MESSAGE, NETWORK and SECURITY settings are not reset. CANCEL OK - Hitachi iPJ-AW250N | User Manual - Page 64
Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult the User's Manual - Network Guide), then you must set the DATE AND TIME during the initial installation. • The network communication control is disabled while the projector is in standby - Hitachi iPJ-AW250N | User Manual - Page 65
set to OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server - Hitachi iPJ-AW250N | User Manual - Page 66
ENTER or INPUT button, 1 character or all characters will be erased.The PROJECTOR NAME can be input up to 64 characters. (3) To change an already and press the ►, ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press - Hitachi iPJ-AW250N | User Manual - Page 67
To store images in the projector, the application software PJImg/Projector Image Tool that can be downloaded from our website is required. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( My Image Function in the User's manual - Network Guide) and the ► or ENTER button - Hitachi iPJ-AW250N | User Manual - Page 68
". For details, see the section Presenter mode in the User's Manual - Network Guide. MULTI PC MODE If you set one or more computers to the Multi PC mode on "LiveViewer" and send their images to the projector, you can select the display mode on the projector from two options below. - S ingle - Hitachi iPJ-AW250N | User Manual - Page 69
the display mode is changed to Multi PC mode, regardless the setting on the computers. For details, see the section Presenter mode in the User's Manual - Network Guide. DISPLAY USER NAME Selecting this item displays the user name. This function helps you identify from which computer the current - Hitachi iPJ-AW250N | User Manual - Page 70
the network connection method in the User's manual - Network Guide. • Only the first 16 characters of the projector name are displayed. • When the voltage input. Replace the battery suitably (93). • IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate "0.0.0.0" when DHCP is ON and the projector has - Hitachi iPJ-AW250N | User Manual - Page 71
the RESET button on the remote control for about 3 seconds or press and hold the INPUT button for 3 seconds while pressing the ► button on the projector. (2). The 10 digit Inquiring Code will be displayed. Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your - Hitachi iPJ-AW250N | User Manual - Page 72
30 seconds, please make note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to MyScreen PASSWORD on/off menu. When a password is set for MyScreen: • The MyScreen registration function (and menu) will be unavailable - Hitachi iPJ-AW250N | User Manual - Page 73
the Enter PIN code box is displayed. This function will activate only when the projector is started after AC power is turned off. • Please do not forget your LOCK function off. If an incorrect PIN code is input 3 times, the projector will turn off. 3 If you have forgotten your PIN code 3-1 While - Hitachi iPJ-AW250N | User Manual - Page 74
TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal. • To display the signal again, set this function OFF. • After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp will turn off. • Keystone adjustment feature has been prohibited - Hitachi iPJ-AW250N | User Manual - Page 75
about 30 seconds, then please make note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to the MY TEXT PASSWORD on/off menu. 2 Turning off the MY TEXT PASSWORD 2-1 Follow the procedure in 1-1 to display the MY TEXT - Hitachi iPJ-AW250N | User Manual - Page 76
When it is set ON, the MY TEXT will be displayed on the START UP screen and the INPUT_ INFORMATION when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT PASSWORD function is set to the OFF. MY TEXT WRITING (1) U se the ▲/▼ buttons - Hitachi iPJ-AW250N | User Manual - Page 77
presentations without using your computer. - Thumbnail mode (78) - Full Screen mode (82) - Slideshow mode (83) [Supported software may not work. • Be careful when inserting or removing a USB device. (12, 80) [Supported format] • FAT12, FAT16 and FAT32 NOTE • NTFS is not supported. [Supported - Hitachi iPJ-AW250N | User Manual - Page 78
tools PC-LESS Presentation (continued) Thumbnail mode The Thumbnail mode displays the images stored in a USB storage mode will be started as the primary function of the PC-LESS Presentation after selecting the USB TYPE A port as the input source. Selected image Thumbnail images Thumbnail menu 78 - Hitachi iPJ-AW250N | User Manual - Page 79
the remote control or keypad or a web browser software. The following functions can be supported while the Thumbnail is displayed. The remote control PAGE UP PAGE DOWN Button operation The keypad on Web Remote in web the projector browser software. - PAGE UP PAGE DOWN ENTER INPUT - Hitachi iPJ-AW250N | User Manual - Page 80
tools PC-LESS Presentation (continued) Operating by the menu on the Thumbnail screen You the menu. Be sure to use this function before removing USB storage device from the projector. After that, the projector will not recognize a USB storage device until you insert it again into the USB TYPE A - Hitachi iPJ-AW250N | User Manual - Page 81
PC-LESS Presentation (continued) Presentation tools NOTE • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode Thumbnail. This file seems to be broken or not supported format. A file that cannot be displayed on the thumbnail screen is indicated by a file - Hitachi iPJ-AW250N | User Manual - Page 82
tools PC-LESS Presentation (continued) Full Screen Mode The Full Screen Control. Full screen display The following functions can be supported in the Full Screen mode. Button operation The remote control The keypad on the projector Web Remote in web browser software. ▼ ► or PAGE DOWN ▼ or ► - Hitachi iPJ-AW250N | User Manual - Page 83
is displayed. The remote control ENTER Button operation The keypad on the projector Web Remote in web browser software. INPUT ENTER Functions Displays thumbnail * These operations are not accessible while the projector OSD is displayed. NOTE • It is not possible to change the input - Hitachi iPJ-AW250N | User Manual - Page 84
tools PC-LESS Presentation (continued) You can play the Slideshow at your desired configuration. Set the interval time of the Slideshow. It is not recommend to set the interval time very short something like several seconds, because it may take more than several seconds to read and display an - Hitachi iPJ-AW250N | User Manual - Page 85
.txt" and it can be edited on a computer. It is created in the folder that contains the selected image files when the PC-LESS Presentation is started or the Slideshow is configured. [Example of "playlist.txt" files] START setting : STOP setting : INTERVAL setting : PLAY MODE setting : img001.jpg - Hitachi iPJ-AW250N | User Manual - Page 86
's Manual - Network Guide) and this application cannot be used at the same time. If you connect your computer to the projector by using a USB cable while the "LiveViewer" is running, the following message will be displayed. • If any application software having the firewall function is installed into - Hitachi iPJ-AW250N | User Manual - Page 87
when you right-click the application icon in the Windows notification area. Presentation tools Display : The Floating menu is displayed, and the icon revise the image data on your computer without showing it on the projector's screen. Option button The Options window is displayed. - Hitachi iPJ-AW250N | User Manual - Page 88
] box, the screen resolution of your computer will be switched as follows, and the display speed may be faster. CP-AW250N, CP-AW250NM: 1280 x 800 If your computer does not support the display resolution specified above, a smaller resolution that is the largest among the resolutions that are - Hitachi iPJ-AW250N | User Manual - Page 89
soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. Type number : DT01181 lamp cover Replacing the lamp 1. Turn the projector off, and unplug the power cord. Allow the - Hitachi iPJ-AW250N | User Manual - Page 90
In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or - Hitachi iPJ-AW250N | User Manual - Page 91
dealer and tell the following type number. Type number : UX37191 (Filter set) When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the - Hitachi iPJ-AW250N | User Manual - Page 92
heavily soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about - Hitachi iPJ-AW250N | User Manual - Page 93
clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL, part number CR2032 or CR2032H. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. Battery cover 2. After making sure that the - Hitachi iPJ-AW250N | User Manual - Page 94
is closed manually, it may not shut properly. • The lens door may not close when the LENS DOOR LOCK function of the SERVICE item SERVICE item in the OPTION menu (&59). WARNING ►Before caring for the projection mirror and lens, turn the projector off and unplug the power cord, then cool the projector - Hitachi iPJ-AW250N | User Manual - Page 95
. CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard - Hitachi iPJ-AW250N | User Manual - Page 96
to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks and Manual - Network Guide) The horizontal or vertical frequency of the input signal is not within the specified range. Please confirm the specs for your projector or the signal source specs - Hitachi iPJ-AW250N | User Manual - Page 97
set FAN SPEED of the SERVICE item in the OPTION menu to HIGH (58). A note of precaution when cleaning the air filter. Please immediately turn the power off, and clean or change the air filter referring to the "Cleaning and replacing the air filter" section of this manual. After you have cleaned or - Hitachi iPJ-AW250N | User Manual - Page 98
displayed after the remedy, please change the lamp referring to the section "Replacing the lamp". Blinking In Red or Lighting In Red Blinking In Red Turned off The lamp cover has not been properly fixed. Please turn the power off, and allow the projector to cool down at least 45 minutes. After - Hitachi iPJ-AW250N | User Manual - Page 99
1 Power ON schedule is saved to the projector. Please refer to Schedule Settings section of User's Manual - Network Guide. NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such - Hitachi iPJ-AW250N | User Manual - Page 100
Troubleshooting Resetting all settings When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE item in OPTION menu (63) can reset all settings (except settings such as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, SECURITY and NETWORK) to the factory default. - Hitachi iPJ-AW250N | User Manual - Page 101
Troubleshooting Phenomena that may be easy to be mistaken for machine defects OPTION menu to project the picture input to the port. Otherwise select other port for picture input. The projector does not recognize the USB storage device inserted into USB TYPE A port. Use the REMOVE USB function first - Hitachi iPJ-AW250N | User Manual - Page 102
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) function. The projector is operating in Eco mode. Set ECO MODE to NORMAL, and set AUTO ECO MODE to OFF, in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the - Hitachi iPJ-AW250N | User Manual - Page 103
Troubleshooting TYPE item in the 61 OPTION - SERVICE - COMMUNICATION menu. Network does The SAVING loop may have an adverse effect on the projector as well as the other network devices. Check which the Please refer to the Microsoft® Help and Support home - "LiveViewer" was page on how to - Hitachi iPJ-AW250N | User Manual - Page 104
Specifications Specifications Please see the Specifications in the User's Manual (concise) which is a book. End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
 |
 |
1
Projector
CP-AW250N
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “
Safety Guide
” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
• Mac
®
is a registered trademark of Apple Inc.
• Windows
®
, DirectDraw
®
and Direct3D
®
are registered trademarks of Microsoft Corporation
in the U.S. and/or other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
•
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• Trademark PJLink is a trademark applied for trademark rights
in Japan, the United States of America and other countries and
areas.
• Blu-ray Disc
TM
and Blu-ray
TM
are trademarks of Blu-ray Disc Association.
All other trademarks are the properties of their respective owners.
NOTICE
This entry notices of fear of causing trouble.
(Type nos. CP-AW250N, CP-AW250NM)