Honeywell 206658AA Owner's Manual

Honeywell 206658AA Manual

Honeywell 206658AA manual content summary:

  • Honeywell 206658AA | Owner's Manual - Page 1
    Thermostats INSTALLATION INSTRUCTIONS APPLICATION The program compartment 203255AA and 206658AA Replacement Doors are used with the T8131 and T8132 Thermostats. INSTALLATION Use the program compartment 203255AA door. Copyright © 1995 Honeywell Inc. • All Rights Reserved X-XX UL 69-0913
  • Honeywell 206658AA | Owner's Manual - Page 2
    XXXXXXXXXXXXXXXX Home and Building Control Honeywell Inc. Honeywell Plaza P.O. Box 524 Minneapolis, MN 55408-0524 69-0913 J.H. 5-95 Home and Building Control Honeywell Limited-Honeywell Limitée 740 Ellesmere Road Scarborough, Ontario M1P 2V9 2 Helping You Control Your World QUALITY IS KEY
  • 1
  • 2

INSTALLATION INSTRUCTIONS
Copyright © 1995 Honeywell Inc.
All Rights Reserved
203255AA and 206658AA
Replacement Doors For
T8131 and T8132 Thermostats
APPLICATION
The program compartment 203255AA and 206658AA
Replacement Doors are used with the T8131 and T8132
Thermostats.
INSTALLATION
Use the program compartment 203255AA Replacement
Door on the taupe color T8131 and T8132 Thermostats.
Use the program compartment 206658AA Replacement
Door on the Premier White® color T8131 and T8132
Thermostats.
To installl your new battery door:
1.
Open the door. Apply slight pressure toward the
right until the left pin disengages from the pin hole.
See Fig. 1. Lift off the door.
2.
Engage the right hinge pin in the right pin hole.
Apply slight pressure in that direction until the left
pin slides into the left pin hole. See Fig. 2.
3.
Open and close the door to check that the pins are
in place.
M9937
TU
AM
LEAVE
Fan
Auto
On
System
Cool
Off
Heat
Set
Clock/Day
Ahead
Back
Warmer
Cooler
Run
Program
Time
Temp
Hold
Temp
Set
Schedule
SYSTEM
TEMPORARY
TO REMOVE DOOR:
APPLY PRESSURE TO
THE LEFT SIDE OF
DOOR AND LIFT OFF.
Fig. 1. Removing the program compartment door.
M9938
TU
AM
LEAVE
Fan
Auto
On
System
Cool
Off
Heat
Set
Clock/Day
Ahead
Back
Warmer
Cooler
Run
Program
Time
Temp
Hold
Temp
Set
Schedule
SYSTEM
TEMPORARY
TO REPLACE DOOR:
APPLY PRESSURE TO
THE LEFT SIDE OF
DOOR AND PUSH DOWN.
Fig. 2. Installing the program compartment door.
69-0913