Honeywell 4600GSF051C-0F00E User Manual

Honeywell 4600GSF051C-0F00E Manual

Get Honeywell 4600GSF051C-0F00E PDF manuals and user guides View all Honeywell 4600GSF051C-0F00E manuals
Add to My Manuals
Save this manual to your list of manuals

Honeywell 4600GSF051C-0F00E manual content summary:

  • Honeywell 4600GSF051C-0F00E | User Manual - Page 1
    User's Guide 4600rp, 4600g/4600r, 4800i ™ Commercial/Retail/Industrial Area Imager
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 2
    when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 3
    Note: To maintain compliance with FCC Rules and Regulations, cables connected to this device must be shielded cables. UL Statement UL listed: UL60950-1 for I.T.E. product safety. Canada Industry Canada ICES-003 This Class A digital apparatus complies with Canadian ICES-003 emissions. Conformité à la
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 4
    to AS/NZS 3548 EMC requirements. Korea (4600r only) M IC Mexico MIC Class A EMC requirements. Applicable if NOM logo is marked on product. International Eye Safety Statement LED This device has been tested in accordance with IEC60825-1 LED safety, and has been certified to be within the limits
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 5
    The 4800i has a rating of IP54, immunity of windblown dust penetration and splashing water tested to Standard EN60259. CB Scheme Certified to IEC60950-1 I.T.E. Product Safety. Patents Please refer to the product packaging for a list of patents.
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 6
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 7
    of Contents Chapter 1 - Getting Started About This Manual 1-1 Unpacking the Imager 1-1 Imager Models 1-2 Imager 1-13 Reading Techniques 1-15 Chapter 2 - Terminal Interfaces Terminal ID 2-1 Supported Terminals 2-2 Keyboard Country 2-4 Keyboard Style 2-6 Keyboard Modifiers 2-7 RS-232
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 8
    Read 3-2 Beeper Duration - Good Read 3-2 LED - Good Read 3-2 Number of Beeps - Good Read 3-3 Good Read Delay 3-3 User-Specified Good Read Delay 3-3 Trigger Modes 3-4 Manual/Serial Trigger 3-4 In-Stand Sensor Mode (4600r only 3-5 Scan Stand Mode 3-5 Scan Stand Symbol 3-6 Presentation Mode
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 9
    Centering 3-12 Decode Search Mode 3-14 Preferred Symbology 3-14 Output Sequence Overview 3-16 Output 4-4 Intercharacter, Interfunction, and Intermessage Delays ....... 4-5 Intercharacter Delay 4-5 User Specified Intercharacter Delay 4-6 Interfunction Delay 4-6 Intermessage Delay 4-7 Chapter 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 10
    Blocks 6-3 Overall Checksum 6-4 Wand Emulation Transmission Rate 6-4 Wand Emulation Polarity 6-5 Wand Emulation Idle 6-5 Data Block Size 6-5 Secondary Trigger Mode 6-6 Manual/Serial Trigger 6-6 Hands Free Time-Out 6-7 Scan Stand Mode 6-8 Scan Stand Symbol 6-8 Presentation Mode 6-8 iv
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 11
    Chapter 7 - Symbologies Message Length Description 7-2 Codabar Start/Stop Characters 7-3 Codabar Check Character 7-3 Codabar Concatenation 7-4 Codabar Message Length 7-5 Code 39 Start/Stop Characters 7-6 Code 39 Check Character 7-6 Code 39 Message Length 7-7 Code 39 Append 7-8 Code 32
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 12
    UPC-E0 Check Digit 7-23 UPC-E0 Number System 7-24 UPC-E0 Addenda 7-24 EAN/JAN-13 Check Digit 7-25 EAN/JAN-13 Addenda 7-26 EAN/JAN-13 Addenda Required 7-26 EAN/JAN-13 Addenda Separator 7-26 ISBN Translate 7-27 EAN/JAN-8 Check Digit 7-27 EAN/JAN-8 Addenda 7-28 EAN/JAN-8 Addenda Required 7-
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 13
    9-3 Stringing Together Multiple Formats (Creating "Or" Statements 9-6 OCR User-Defined Variables 9-6 Reading Multi-Row OCR 9-7 OCR Check Character 10 Check Character 9-8 OCR Modulo 36 Check Character 9-9 OCR User-Defined Check Character 9-9 Weighting Options 9-10 OCR ISBN Application
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 14
    a Test Code I.D. Prefix to All Symbologies.......... 11-1 Show Decoder Revision 11-1 Show Engine Revision 11-1 Show Scan Driver Revision 11-2 Show Software Revision 11-2 Show Data Format 11-2 Resetting the Standard Product Defaults 11-2 Test Menu 11-3 2D PQA (Print Quality Assessment 11-3 2D
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 15
    Connectors 14-1 Replacing the Interface Cable 14-2 Troubleshooting 14-4 Chapter 15 - Customer Support Technical Assistance 15-1 Online Technical Assistance 15-2 For Further Information 15-2 Product Service and Repair 15-2 Online Product Service and Repair Assistance 15-3 Limited Warranty 15
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 16
    x
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 17
    1 Getting Started About This Manual This User's Guide provides installation and programming instructions for the 4000 Series imagers. Product specifications, dimensions, warranty, and customer support information are also included. Hand Held Products barcode imagers are factory programmed for the
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 18
    (IBM SurePOS), USB COM port emulation Secondary True RS-232 Wand Emulation, TTL level 232 TTL level 232 TTL level 232 1 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 19
    Imager Identification Compliance Label location Item Number, Serial Number and Revision Information location 4600rp, 4600g/4600r, 4800i User's Guide 1 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 20
    using the Plug and Play barcodes beginning on page 1-8. 6. Verify the imager operation by scanning a barcode from the Sample Symbols in the back of this manual. The imager beeps once. Your imager is factory programmed for a keyboard wedge interface to an IBM PC AT with a USA keyboard. If this is
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 21
    on page 1-9. 3. The imager beeps. 4. Verify the imager operation by scanning a barcode from the Sample Symbols in the back of this manual. For additional USB programming and technical information, refer to Hand Held Products "USB Application Note," available at www.handheld.com. 4600rp, 4600g
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 22
    correct cable for your type of terminal/computer. 3. Plug the serial connector into the serial port on your computer. Tighten the two screws to secure the connector to the port. 4. Plug the power supply into the cable. 5. Once the imager has been fully connected, power up the computer. 6. Program
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 23
    4. Plug the serial connector into the serial port on your computer. Tighten the two screws to secure the connector to the port. 5. Plug the other serial connector into the host connection and tighten has been fully connected, power up the computer. 4600rp, 4600g/4600r, 4800i User's Guide 1 - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 24
    set up the serial wedge terminal ID, use the serial terminal ID 050 and follow the instructions on page 2-1. 10. Program the port for data transmission using the barcodes on page 1- External Keyboard (page 2-7). Laptop Direct Connect with CR suffix 1 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 25
    -A UPC-E Code 39 Interleaved 2 of 5 Code 128 Suffix 0C 16 0D 0A 00 0A 0B 00 0D 0B 00 18 0B 4600rp, 4600g/4600r, 4800i User's Guide 1 - 9
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 26
    code below changes the terminal ID to 130. USB COM Port Emulation Note: No extra configuration (e.g., baud rate) is necessary. 1 - 10 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 27
    -232 interface at 38,400 baud, parity-none, 8 data bits, 1 stop bit, and adds a suffix of a CR LF. RS-232 Interface 4600rp, 4600g/4600r, 4800i User's Guide 1 - 11
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 28
    cycle the cash register. IBM 4683 Port 5B Interface IBM 4683 Port 17 Interface IBM 4683 Port 9B HHBCR-1 Interface 1 - 12 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 29
    , and Interleaved 2 of 5 without any changes, but converts all other symbologies to Code 39. 2D symbologies are converted to Code 128. 4600rp, 4600g/4600r, 4800i User's Guide 1 - 13
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 30
    to Wand Emulation Connection on page 2-13.) Wand Emulation Plug & Play (Code 39 Format) Wand Emulation Plug & Play Same Code 1 - 14 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 31
    to the imager's horizontal field of view. The aiming beam should be centered over the barcode, but it can be positioned in any direction for the imager at an appropriate distance from the target, pull the trigger, and center the aiming beam on the symbol. If the code being scanned is highly
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 32
    1 - 16 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 33
    a Plug and Play barcode from Chapter 1, then refer to Supported Terminals on page 2-2 through page 2-3, and locate the Terminal ID numeric barcode(s) from the Programming Chart inside the back cover of this manual to program the imager for your terminal ID. Scan Save to save User's Guide 2 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 34
    Supported Terminals Note: See "Imager Models" on page 1-2 to determine which interfaces apply to your imager. Terminal DDC DDC DEC DEC Esprit Heath Zenith Heath 002 003 * 006 007 008 024 114 102 128* 129* 097 106 003 008 007 007 103 001 003 000** 000 2 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 35
    Supported Terminals Note: See "Imager Models" on page 1-2 to determine which interfaces apply to your imager. Terminal Model(s) Terminal ID , rather than scanning the terminal ID listed in this table. ** Default for 4600g/4800iXX 03XX models 4600rp, 4600g/4600r, 4800i User's Guide 2 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 36
    Country Scan the appropriate country code below to program the keyboard for your country. As a general rule, the following characters are supported, but need special care for countries other than the United States * United States Brazil Czech Republic Finland (Sweden) Germany/Austria Hungary
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 37
    Keyboard Country (continued) Italy Netherlands (Dutch) Poland Romania SCS Spain Switzerland (German) Latin America Norway Portugal Russia Slovakia Sweden 4600rp, 4600g/4600r, 4800i User's Guide 2 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 38
    U.K. Please refer to the Hand Held Products website (www.handheld.com) for complete keyboard country support information and applicable interfaces. If you need to program a keyboard for a country other than one have the Caps Lock key on. Caps Lock 2 - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 39
    keyboards). Shift Lock Automatic Caps Lock is used if you change the Caps Lock key on and off. The software tracks and reflects if you have Caps Lock on or off (AT and PS/2 only). This selection can only , such as CTRL+ ASCII codes and Turbo Mode. 4600rp, 4600g/4600r, 4800i User's Guide 2 - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 40
    ASCII control characters for values 00-1F. Windows is the preferred mode. All keyboard country codes are supported. DOS mode is a legacy mode, and it does not support all keyboard country codes. New users Keypad Mode On * Numeric Keypad Mode Off 2 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 41
    Automatic Direct Connect Mode: This selection can be used if you have an IBM AT style terminal and the system is dropping characters. Default = Off Automatic Direct Connect Mode On * Automatic Direct Connect Mode Off 4600rp, 4600g/4600r, 4800i User's Guide 2 - 9
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 42
    RS-232 Baud Rate Baud Rate sends the data from the imager to the terminal at the specified rate. The host terminal must be set for the same baud rate as the imager. Default = 38,400. 300 1200 4800 19200 57,600 600 2400 9600 * 38400 115,200 2 - 10 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 43
    Even 8 Data, 1 Stop, Parity Odd 7 Data, 1 Stop, Parity None 7 Data, 2 Stop, Parity Even 7 Data, 2 Stop, Parity Odd * 8 Data, 1 Stop, Parity None 4600rp, 4600g/4600r, 4800i User's Guide 2 - 11
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 44
    barcode below, then scanning digits from the inside back cover of this manual, then scanning Save. The range is 0 to 300 seconds. Default -232 Handshaking RS-232 Handshaking allows control of data transmission from the Imager using software commands from the host device. When this feature User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 45
    the Same Code Format barcode sets the terminal ID to 64. Default = Code 39 Format. Code 39 Format Same Code Format 4600rp, 4600g/4600r, 4800i User's Guide 2 - 13
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 46
    * 40 60 80 Delay Between Blocks This sets the delay time between data blocks. Default = 50ms. 5ms 150ms * 50ms 500ms 2 - 14 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 47
    by the terminal's ability to receive data without dropping characters. Default = 25 inches/second. 10 * 25 40 80 120 150 200 4600rp, 4600g/4600r, 4800i User's Guide 2 - 15
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 48
    match the idle state for the device to which the imager is connected. Default = Idle High. * Idle High Idle Low 2 - 16 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 49
    the imager emits on a good read. Default = Medium for the 4600g/4600r/4600rp; High for the 4800i. Low High Medium Off 4600rp, 4600g/4600r, 4800i User's Guide 3 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 50
    LED - Good Read The LED indicator can be programmed On or Off in response to a good read. Default = On. * On Off 3 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 51
    (1-9) barcode and the Save barcode on the Programming Chart inside the back cover of this manual. Default = One. Number of Pulses Good Read Delay This sets the minimum amount of inside back cover, then scanning Save. User-Specified Good Read Delay 4600rp, 4600g/4600r, 4800i User's Guide 3 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 52
    to turn itself off after a specified time has elapsed (see Read Time-Out, which follows). * Manual/Serial Trigger Read Time-Out Use this selection to set a time-out (in milliseconds) of the imager in low power time-out mode. Manual Trigger, Low Power 3 - 4 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 53
    determining the software in your unit. When a unit is in Scan Stand mode, it remains idle as long as it sees the Scan Stand symbol. (See Scan Stand Symbol on page 3-6.) When a different code is presented, the imager is triggered to read the new code. 4600rp, 4600g/4600r, 4800i User's Guide 3 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 54
    the barcodes. If the light level in the room is not high enough, Presentation Mode may not work properly. Presentation Mode 3 - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 55
    a software revision of 31205480-118 or newer. Refer to the Show Software Revision on page 11-2 for information on determining the software in your lower priority symbol must be centered on the aiming pattern to be read in Streaming Presentation Mode. 4600rp, 4600g/4600r, 4800i User's Guide 3 - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 56
    is pulled when using a hands free mode, the imager changes to manual trigger mode. You can set the time the imager should remain in manual trigger mode by setting the Hands Free Time-Out. Once the time- ms) * Medium (750 ms) Extra Long (2000 ms) 3 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 57
    delay (from 0-30,000 milliseconds) by scanning digits from the inside back cover, then scanning Save. User-Specified Reread Delay LED Power Level This selection allows you to adjust LED and aimer brightness. Off is off, scan the Lights Off barcode. 4600rp, 4600g/4600r, 4800i User's Guide 3 - 9
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 58
    000 ms. Note: The default applies to firmware with a base number of 31205480. Refer to the Show Software Revision on page 11-2 for information on determining the firmware revision in your unit. Imager Time-Out Aimer * Off (no delay) 400 milliseconds 3 - 10 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 59
    User-Specified Aimer Delay If you want to set your own length for the duration of the delay, scan the barcode below, then set the time-out by scanning digits (0 - 4,000 ms) from the Programming Chart inside the back cover of this manual Concurrent 4600rp, 4600g/4600r, 4800i User's Guide 3 - 11
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 60
    user. For instance, if multiple codes are placed closely together, centering will insure that only the desired codes are read. (Centering and Centering features Bottom Default Center 60% Left Right centering is turned on by scanning Centering On, the imager only reads codes that intersect the centering
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 61
    the inside back cover of this manual. Scan Save. Default Centering = 40% for Top and Left, 60% for Bottom and Right. Centering On Top of Centering Window Left of Centering Window * Centering Off Bottom of Centering Window Right of Centering Window 4600rp, 4600g/4600r, 4800i User's Guide 3 - 13
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 62
    setting. Full Omnidirectional Quick Omnidirectional - This is an abbreviated search for barcode features around the center region of an image. This mode quickly reads all symbologies in any orientation. The Quick read instead of the Code 39. 3 - 14 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 63
    the time-out period expires, then no data is reported. Note: A low priority symbol must be centered on the aiming pattern to be read. Scan a barcode below to enable or disable Preferred Symbology. your selection. Default = None Low Priority Symbology 4600rp, 4600g/4600r, 4800i User's Guide 3 - 15
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 64
    barcode in the sequence. To Add an Output Sequence 1. Scan the Enter Sequence symbol (see Require Output Sequence, page 319). 3 - 16 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 65
    93 3rd, as shown below. Note: Code 93 must be enabled to use this example. A - Code 39 B - Code 128 C - Code 93 4600rp, 4600g/4600r, 4800i User's Guide 3 - 17
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 66
    length (11) plus CR suffix (1) = 12 43 start character match for Code 93, 43h = "C" FF termination string for third code 3 - 18 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 67
    imager decodes it. Note: This selection is unavailable when the Multiple Symbols Selection is turned on. Required *Off On/Not Required 4600rp, 4600g/4600r, 4800i User's Guide 3 - 19
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 68
    can edit the output message using the Data Formatter (page 5-5). The hex code for the No Read symbol is 9C. 3 - 20 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 69
    menuing is completed. Note: Images downloaded from the unit will not be reversed. This is a setting for decoding only. On * Off 4600rp, 4600g/4600r, 4800i User's Guide 3 - 21
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 70
    Code Counterclockwise 90°: * Upright Upside Down Rotate Code Clockwise 90° (Rotate Imager Counterclockwise) Rotate Code Counterclockwise 90° (Rotate Imager Clockwise) 3 - 22 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 71
    data. This group of barcode data and additional, user-defined data is called a "message string." The selections in this section are used to build the user-defined data into the message string. Prefix and Suffix as an added prefix or suffix character. 4600rp, 4600g/4600r, 4800i User's Guide 4 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 72
    Programming Chart inside the back cover of this manual or scan 9, 9 for all symbologies. from the Programming Chart inside the back cover of this manual. Step 6. Repeat Steps 4 and 5 for every inside the back cover of this manual. Step 4. Determine the hex value manual. Step 6. Scan Save, or scan
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 73
    suffix. Step 3. Scan the 2 digit hex value from the Programming Chart inside the back cover of this manual or scan 9, 9 for all symbologies. Your change is automatically saved. To Add a Carriage Return Suffix symbologies. Add CR Suffix All Symbologies 4600rp, 4600g/4600r, 4800i User's Guide 4 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 74
    function codes are contained within the scanned data, the imager transmits the function code to the terminal. Charts of these function codes are provided in Supported Interface Keys starting on page 10-3. When the imager is in keyboard wedge mode, the scan code is converted to a key code before it
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 75
    Save barcode using the Programming Chart inside the back cover of this manual. Prefix Scanned Data Suffix 1234 5 Intercharacter Delay Intercharacter Delay To of this manual. Note: Intercharacter delays are not supported in USB serial emulation. 4600rp, 4600g/4600r, 4800i User's Guide 4 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 76
    steps (0-99), and the Save barcode using the Programming Chart inside the back cover of this manual. Next, scan the Character to Trigger Delay barcode, then the 2-digit hex value for the the Programming Chart inside the back cover of this manual. 4 - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 77
    99), and the Save barcode using the Programming Chart inside the back cover of this manual. 1st Scan Transmission 2nd Scan Transmission Intermessage Delay Intermessage Delay To remove this delay, Programming Chart inside the back cover of this manual. 4600rp, 4600g/4600r, 4800i User's Guide 4 - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 78
    4 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 79
    scan 0 using the Programming Chart inside the back cover of this manual. If you are programming an alternate format, scan 1, 2, alternate format you are programming. Step 3. Terminal Type Refer to Supported Terminals (page 2-2) and locate the Terminal ID number for /4600r, 4800i User's Guide 5 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 80
    hex value from the Programming Chart inside the back cover of this manual. Step 5. Length Specify what length (up to 9999 characters) of are clearing. Scan the Terminal Type and Code I.D. (see Supported Terminals on page 2-2), and the barcode data length for the 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 81
    Disables suppress filter and clear all suppressed characters. Syntax = FC. E4 Replaces up to 15 characters in the data string with user specified characters. Replacement continues until the E5 command is encountered. Syntax = E4nnxx1xx2yy1yy2...zz1zz2 where nn is the total count of both characters
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 82
    sure there is a non-numeric ASCII character at the current cursor position. If character is numeric, format is aborted. Syntax = ED. 5 - 4 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 83
    an edited format or the imager does not transmit the input data to the host device. Data Format On, Format Required 4600rp, 4600g/4600r, 4800i User's Guide 5 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 84
    with the selected alternate format, then revert immediately to the primary format. Alternate Data Format 1 Alternate Data Format 3 Alternate Data Format 2 5 - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 85
    interface). Refer to the table below for interfaces supported by your model. Some features don't apply if the interface is not supported by your model. Imager Models Models 4600gXX03XX 4800iXX03XX The secondary interface can be programmed at any time. 4600rp, 4600g/4600r, 4800i User's Guide 6 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 86
    codes set the transmission rate to 25 inches per second and the output polarity to black, high. Default = Code 39 Format. 6 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 87
    Emulation on page 2-14). Delay Between Blocks This sets the delay time between data blocks. Default = 50ms. 5ms 150ms * 50ms 500ms 4600rp, 4600g/4600r, 4800i User's Guide 6 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 88
    by the terminal's ability to receive data without dropping characters. Default = 25 inches/second. 10 * 25 40 80 120 150 200 6 - 4 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 89
    Low Data Block Size This transmits the data in smaller blocks to prevent buffer overflow. Default = 40. 20 * 40 60 80 4600rp, 4600g/4600r, 4800i User's Guide 6 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 90
    page 12-4). When in manual trigger mode, the imager scans Time-Out, which follows). * Manual/Serial Trigger Read Time-Out Use if the imager is in manual trigger mode. Once the the primary interface. Manual Trigger, Low Power Manual Trigger, Low Power Note: Manual Trigger, Low Power cannot be
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 91
    trigger is pulled when using a hands free mode, the imager changes to manual trigger mode. You can set the time the imager should remain in manual trigger mode by setting the Hands Free Time-Out. Once the time- Default = 5,000 ms. Hands Free Time-Out 4600rp, 4600g/4600r, 4800i User's Guide 6 - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 92
    available for non-advanced illumination units with software revision 31205480-090 or older. Refer to the Show Software Revision on page 11-2 for information on determining the software in your unit. When a unit is not work properly. Presentation Mode 6 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 93
    •UCC Composite Codes • Telepen • GS1 DataBar Omnidirectional • UPC-A • GS1 DataBar Limited • UPC-A/EAN-13 with Extended Coupon Code • GS1 DataBar Expanded • 4600rp, 4600g/4600r, 4800i User's Guide 7 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 94
    of the symbology, then scan the digit value of the message length and Save barcodes on the Programming Chart inside the back cover of this manual. The minimum and maximum lengths and the defaults are included with the respective symbologies. 7 - 2 4600rp, 4600g/4600r, 4800i
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 95
    will only read Codabar barcodes printed with a check character, and will transmit this character at the end of the scanned data. 4600rp, 4600g/4600r, 4800i User's Guide 7 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 96
    Validate Modulo 16, but Don't Transmit Validate Modulo 16 and Transmit Codabar Concatenation Codabar supports symbol concatenation. When you enable concatenation, the imager looks for a Codabar symbol Start Stop Start Stop Codabar A12D D34A 7 - 4 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 97
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 2-60. Minimum Default = 4, Maximum Default = 60. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 98
    Code 39 Check Character No Check Character indicates that the imager reads and transmits barcode data with or without a check character. 7 - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 99
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 0-48. Minimum Default = 0, Maximum Default = 48. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 100
    ) Code 32 Pharmaceutical is a form of the Code 39 symbology used by Italian pharmacies. This symbology is also known as PARAF. 7 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 101
    L L \ %L l +L | %Q = %H M M ] %M m +M } %R > %I N N ^ %N n +N ~ %S ? %J O O _ %O o +O DEL %T Character pairs /M and /N decode as a minus sign and period respectively. Character pairs /P through /Y decode as 0 through 9. Full ASCII On 4600rp, 4600g/4600r, 4800i User's Guide * Full ASCII Off 7 - 9
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 102
    and scan the value and the Save barcode from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly. Code 39 Code Page Interleaved 2 of 5 < Default All check digit with the scanned data. 7 - 10 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 103
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 11
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 104
    of Printed Barcodes on page A-6), and scan the value and the Save barcode from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly. 7 - 12 Code 93 Code Page 4600rp, 4600g/4600r, 4800i
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 105
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 1-48. Minimum Default = 4, Maximum Default = 48. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 13
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 106
    (page 7-2) for additional information. Minimum and Maximum lengths = 1-48. Minimum Default = 4, Maximum Default = 48. Minimum Message Length Maximum Message Length 7 - 14 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 107
    Maximum lengths = 1-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Code 11 Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 15
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 108
    (page 7-2) for additional information. Minimum and Maximum lengths = 1-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length 7 - 16 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 109
    Concatenation In 1994 the International Society of Blood Transfusion supports concatenation of neighboring symbols, and 4) the standard layout for barcodes on a blood product label. Use the barcodes below to turn concatenation on or off. Default =Off. On * Off 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 110
    of Printed Barcodes on page A-6), and scan the value and the Save barcode from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly. Code 128 Code Page 7 - 18 4600rp, 4600g/4600r, 4800i
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 111
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 1-60. Minimum Default = 1, Maximum Default = 60. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 19
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 112
    of the scanned data, but the unit can be programmed so it will not transmit it. Default = On. * On Off 7 - 20 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 113
    data from the barcode and the data from the addenda. When turned off, there is no space. Default = On. * On Off 4600rp, 4600g/4600r, 4800i User's Guide 7 - 21
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 114
    Off UPC-E0 Expand UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format. Default = Off. On 7 - 22 * Off 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 115
    specifies whether the check digit should be transmitted at the end of the scanned data or not. Default = On. * On Off 4600rp, 4600g/4600r, 4800i User's Guide 7 - 23
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 116
    codes that lead with the 1 number system, use the UPC-E1 selection. Default = Off. UPC-E1 On * UPC-E1 Off 7 - 24 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 117
    EAN/JAN-13 EAN/JAN-13 * On Off EAN/JAN-13 Check Digit This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On. * On Off 4600rp, 4600g/4600r, 4800i User's Guide 7 - 25
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 118
    from the barcode and the data from the addenda. When turned off, there is no space. Default = On. * On Off 7 - 26 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 119
    specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On. * On Off 4600rp, 4600g/4600r, 4800i User's Guide 7 - 27
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 120
    from the barcode and the data from the addenda. When turned off, there is no space. Default = On. * On Off 7 - 28 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 121
    will not transmit the check character with the scanned data. * Validate Type 10, but Don't Transmit Validate Type 10 and Transmit 4600rp, 4600g/4600r, 4800i User's Guide 7 - 29
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 122
    (page 7-2) for additional information. Minimum and Maximum lengths = 4-48. Minimum Default = 4, Maximum Default = 48. Minimum Message Length Maximum Message Length 7 - 30 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 123
    Limited < Default All GS1 DataBar Limited Settings > GS1 DataBar Limited * On Off GS1 DataBar Expanded < Default All GS1 DataBar Expanded Settings > 4600rp, 4600g/4600r, 4800i User's Guide 7 - 31
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 124
    (page 7-2) for additional information. Minimum and Maximum lengths = 4-74. Minimum Default = 4, Maximum Default = 74. Minimum Message Length Maximum Message Length 7 - 32 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 125
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 48. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 33
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 126
    (page 7-2) for additional information. Minimum and Maximum lengths = 1-2048. Minimum Default = 1, Maximum Default = 2048. Minimum Message Length Maximum Message Length 7 - 34 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 127
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 0-160. Minimum Default = 1, Maximum Default = 160. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 35
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 128
    (page 7-2) for additional information. Minimum and Maximum lengths = 1-81. Minimum Default = 1, Maximum Default = 81. Minimum Message Length Maximum Message Length 7 - 36 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 129
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 1-2750. Minimum Default = 1, Maximum Default = 2750. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 37
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 130
    EAN•UCC Composite symbology. EAN•UCC Composite symbologies allow for the co-existence of symbologies already in use. On * Off 7 - 38 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 131
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 1-2435. Minimum Default = 1, Maximum Default = 2435. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 39
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 132
    TLC39 On is selected. The linear component may be decoded as Code 39 even if TLC39 is off. On * Off 7 - 40 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 133
    have firmware with a base number of 31205480. Refer to the Show Software Revision on page 11-2 for information on determining the firmware revision in with a base number of 31205480. Refer to the Show Software Revision on page 11-2 for information on determining the firmware revision in your
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 134
    the check digit should be transmitted at the end of the scanned data. Transmit Check Digit * Don't Transmit Check Digit 7 - 42 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 135
    , page 3-22, if your Kix codes will not usually be presented upright to the imager. On * Off Australian Post On * Off 4600rp, 4600g/4600r, 4800i User's Guide 7 - 43
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 136
    Australian Post Interpretation This option controls what interpretation is applied to customer fields in Australian 4- option if you have firmware with a base number of 31205480. Refer to the Show Software Revision on page 11-2 for information on determining the firmware revision in your unit. *
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 137
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 45
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 138
    (page 7-2) for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 48. Minimum Message Length Maximum Message Length 7 - 46 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 139
    Note: The default applies to firmware with a base number of 31205480. Refer to the Show Software Revision on page 11-2 for information on determining the firmware revision in your unit QR Code = 3500. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 47
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 140
    (page 7-2) for additional information. Minimum and Maximum lengths = 1-1500. Minimum Default = 1, Maximum Default = 1500. Minimum Message Length Maximum Message Length 7 - 48 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 141
    Description (page 7-2) for additional information. Minimum and Maximum lengths = 1-150. Minimum Default = 1, Maximum Default = 150. Minimum Message Length Maximum Message Length 4600rp, 4600g/4600r, 4800i User's Guide 7 - 49
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 142
    smallest type of Aztec Code symbol with the ability to encode a very short license plate message. Enable Runes 7 - 50 * Disable Runes 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 143
    scanner is like a digital camera in the way it captures, manipulates, and transfers images. The following commands allow you to alter the way the imager performs these functions. Single-Use Basis Imaging Commands with their modifiers send instructions in this manual. The quality User's Guide 8 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 144
    a simple digital camera, and results in a visually optimized image. 2P Manual Style. This is an advanced style that should only be used by an experienced user. It allows you the most freedom to set up the imager, and a button push, then takes the image 8 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 145
    using Decoding Style (0P). 0L LEDs off (default) 1L LEDs on E - Exposure Exposure is used in Manual Style only (2P), and allows you to set the exposure time. This is similar to setting a shutter Example of Exposure at 100E with fluorescent lighting: 4600rp, 4600g/4600r, 4800i User's Guide 8 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 146
    G - Gain Gain is used in Manual Style only (2P). Like a volume control, the gain modifier boosts the signal and multiplies the pixel value. As you increase the gain, Tries is only available when using Photo Style (1P). (Default = 6) nU Range: 0 - 10 8 - 4 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 147
    Set Point Percentage at 97%: Example of Target Set Example of Target Set Point Percentage at 50%: Point Percentage at 40%: 4600rp, 4600g/4600r, 4800i User's Guide 8 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 148
    Filter off (0A) from approximately 12 feet (3.66m) away: Example of Infinity Filter on (1A) from approximately 12 feet (3.66m) away: 8 - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 149
    typical image ne Apply edge sharpen using strength n (n = 1-24) Example of Edge Sharpen at 0E: Example of Edge Sharpen at 24E: 4600rp, 4600g/4600r, 4800i User's Guide 8 - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 150
    image formats. 0H No stretch (default) 1H Histogram stretch Example of Histogram Stretch at 0H: Example of Histogram Stretch at 1H: 8 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 151
    noise reduction (default) 1if Salt and pepper noise reduction Example of Noise Reduction Off (0if): Example of Noise Reduction On (1if): 4600rp, 4600g/4600r, 4800i User's Guide 8 - 9
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 152
    as much as possible while preserving quality factor of n (n = 0 - 100) 0J worst quality (smallest file) 100J best quality (largest file) 8 - 10 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 153
    ) Example of Gamma Correction set to 0K: Example of Gamma Correction set to 50K: Example of Gamma Correction set to 255K: 4600rp, 4600g/4600r, 4800i User's Guide 8 - 11
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 154
    number of pixels to cut from the outside margin of the image; thus only the center pixels are transmitted. nM Margin: cut n columns from the left, n + 1 and n + 1 rows from the bottom of the image. Ship the remaining center pixels. Range: 0 - 238. (Default = 0, or full image) Example of Image Crop
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 155
    used with gamma correction (see page 8-11), with the imager in a stand, and the image captured using the command: IMGSNP1P0L168W90%32D 4600rp, 4600g/4600r, 4800i User's Guide 8 - 13
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 156
    an image. 0V Don't blur (default) 1V Blur Example of Blur Image Off (0V): Example of Blur Image On (1V): 8 - 14 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 157
    " on page 11-1 for information on determining the engine in your unit. Default = Force VGA Resolution * Force VGA Resolution Native Resolution 4600rp, 4600g/4600r, 4800i User's Guide 8 - 15
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 158
    from the Products list, then select QuickView Software Utility. Below is an example of a signature capture application. In this example, the aimer is centered over the signature capture area and the trigger clarity. The following image is captured: 8 - 16 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 159
    be grayscale or black and white. 8D 8 bits per pixel, grayscale image (default) 1D 1 bit per pixel, black and white image 4600rp, 4600g/4600r, 4800i User's Guide 8 - 17
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 160
    of Gamma Correction set to 0K: Example of Gamma Correction set to 50K: Example of Gamma Correction set to 255K: 8 - 18 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 161
    in a value of W = 2.4/0.01 = 240. (A value of 245 was used in the example to accommodate a slightly wider image area.) Example: IMGBOX245w37h55y. 4600rp, 4600g/4600r, 4800i User's Guide 8 - 19
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 162
    to -75X: Y - Vertical Barcode Offset The vertical barcode offset allows you to offset the vertical center of the signature capture area. Negative numbers indicate that the signature capture is above the barcode, Example of Vertical Offset set to 65Y: 8 - 20 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 163
    OCR). The 2D imager reads 6 to 60 point OCR typeface. Note: OCR is not as secure as barcodes. To enhance security in OCR applications, create an OCR template to match the data, and print an OCR check Creating an OCR Template, page 9-3). OCR-A On 4600rp, 4600g/4600r, 4800i User's Guide 9 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 164
    output as T the amount character is output as A the on us character is output as O the dash character is output as D 9 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 165
    a single format, you can string together several formats, and you can create a template for a user-defined variable. These choices are described in detail below. Creating an OCR Template A single template allows the Template Characters table below. 4600rp, 4600g/4600r, 4800i User's Guide 9 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 166
    user-defined variable "g" h represents character from user-defined variable "h" i represents character from user Sample Codes in the back of this manual) to scan the characters for your from the OCR Programming Chart in the back of this manual eight times. Scan Save OCR Template (page 9-14
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 167
    OCR Template symbol (page 9-13). Scan the d from the OCR Programming Chart in the back of this manual three times. Then scan 414243 from the inside back cover (the hex characters for "A," "B," and "C"), and scan saving any OCR Template changes. 4600rp, 4600g/4600r, 4800i User's Guide 9 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 168
    Enter OCR Template symbol (page 9-13). Scan the d from the OCR Programming Chart in the back of this manual eight times, then scan the t to create the "or" statement. Then you would scan the characters for could create the following template: ddddddggg 9 - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 169
    both rows: OCRTMP"ddddddddrllllllll". To read the three rows below, you would use the template command "OCRTMP"ddddddddrllllllllrlllldddd". 12345678 ABCDEFGH ABCD1234. 4600rp, 4600g/4600r, 4800i User's Guide 9 - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 170
    Character You may want to print and verify a check character in order to enhance the security of your OCR application. The imager can be programmed for almost any type of check character checksum of the digits 0 through 9. OCR Modulo 10 Check Character 9 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 171
    OCR Modulo 36 Check Character OCR User-Defined Check Character You can customize the unweighted, but the imager also supports two weighted modulo 10 checking be valid, so the reader outputs the message: 6512351 Programming a User-Defined Check Character 1. Scan the Enter OCR Check Character barcode,
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 172
    Page 1252), page A-4. Use the Programming Chart on the inside the back cover of this manual to scan the two symbols for each hex value. 3. Scan the Save barcode on the inside x 3 + 1 x 1 + 2 x 3 + 3 x 1 + 4 x 3 + 5 x 1 + 6 x 3 + 5 x 1) modulo 10 = 0 9 - 10 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 173
    = (0 + 2 + 2 + (1 + 6) + 4 + (1 + 0) + 4) modulo 10 = 0 Since the result is zero, the message is considered to be valid, so the reader outputs the message: 012845 4600rp, 4600g/4600r, 4800i User's Guide 9 - 11
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 174
    Program the user-defined variable "h" to comprise the "P" and the yen symbol (represented by a backslash). P\ 4. Scan the symbol below to set up three templates to handle the ISBN number, the three digit price field, and the four digit price field. 9 - 12 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 175
    Contact the factory if you have an application that requires reading four or more rows of OCR. Enter OCR Template † Enter User-Defined Variable "g"† Enter User-Defined Variable "h"† † One or more two-digit numbers and Save are required after reading this programming symbol. Refer to the Programming
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 176
    Exit Selections Save OCR Template Discard OCR Template 9 - 14 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 177
    relationships apply to all terminals that can be used with the imager. Refer to page 2-8 enable Control + ASCII mode. Function Code NUL SOH STX ETX EOT ENQ ACK BEL BS HT LF VT "CTRL" + @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ 4600rp, 4600g/4600r, 4800i User's Guide 10 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 178
    [ Scandinavia 8 France ^ Germany Italy Switzerland United Kingdom [ Denmark 8 Norway 8 Spain [ Codes \ ] 6 - < ] 6 - < 9 6 - 8 $ 6 = Ã + 6 - \ + 6 - < . . 6 - ¢ ] 6 - \ 9 6 - \ 9 6 - \ ] 6 - 10 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 179
    Compatibles, IBM XTs and WYSE PC/AT Compatibles ASCII HEX Supported Keys Supported Keys NUL 00 Reserved Reserved SOH 01 Enter (KP) 3196/97, 3476/77, Telex (all models) IBM, DDC, Memorex Telex, Harris* Supported Keys Reserved Enter F11 F12 F13 F14 F15 New Line F16 F17 F18 Tab/Field Forward
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 180
    Interface Keys ASCII HEX IBM, Memorex Telex (102)* Memorex Telex (88)** Supported Keys Supported Keys NUL 00 Reserved Reserved SOH 01 Enter Enter STX 02 F11 PF10 ETX models) with 102 key keyboards ** Memorex Telex with 88 key keyboards 10 - 4 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 181
    Supported 1D RS 1E US 1F Esprit 200, 400 ANSI Supported Keys Reserved New Line N/A N/A N/A N/A N/A F5 F6 F7 F8 F9 F10 Esprit 200, 400 ASCII Supported Keys Reserved New Line N/A N/A N/A N/A N/A New Line F6 F7 F8 F9 F10 Esprit 200, 400 PC Supported Keys Reserved New Line N/A N/A N/A N/A N/A New
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 182
    Supported Interface Keys ASCII NUL SOH STX ETX EOT ENQ ACK BEL BS HT LF VT FF CR SO SI DLE 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 7F Apple Mac/iMac Supported Keys Reserved Enter/Numpad Enter CAPS ALT make ALT break CNTRL make CNTRL break RETURN APPLE make TAB APPLE break TAB Del
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 183
    Show Decoder Revision option if you have firmware with a base number of 31205480. Refer to Show Software Revision on page 11-2 for information on determining the firmware revision in your unit. Show Decoder : 1 Revision: 26[ACK] Show Engine Revision 4600rp, 4600g/4600r, 4800i User's Guide 11 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 184
    revision. The scan driver controls image capture. You may use the Show Scan Driver Revision option if you have firmware with a base number of 31205480. Refer to the Show Software Revision below for information an asterisk (*) on the programming pages). 11 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 185
    Menu When you scan the Test Menu On code, then scan a programming code in this manual, the imager displays the content of a programming code. The programming function will still occur, command: 2D_PQA1 or by scanning the following barcode: Full Report 4600rp, 4600g/4600r, 4800i User's Guide 11 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 186
    on interpreting your read results, please refer to Hand Held Products Quick Check 2D Print Assessment User's Guide. Visual Xpress Introduction Note: Software revision 31205480-118 (or newer) with support for light bar offaxis illumination is backward compatible with all non-light bar units. This new
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 187
    continuously captured by the imager. Installing Visual Xpress from the Web Note: Visual Xpress requires .NET software. If .NET is not installed on your PC, you will be prompted to install it during Menu-Programs-Hand Held Products-Visual Xpress. 4600rp, 4600g/4600r, 4800i User's Guide 11 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 188
    Click on Search and enter Quick*View. 3. Click on Search. 4. Click on the entry for Software. Select Quick*View Software Utility. 5. When prompted, select Save, and save the files to the c:\windows\temp directory. , cycle the power. Quick*View 11 - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 189
    serial programming command, refer to the corresponding programming barcode in this manual. The device must be set to an RS-232 interface can be sent via a PC COM port using terminal emulation software. Conventions The following conventions are used for menu and query command User's Guide 12 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 190
    this Tag and SubTag combination, e.g., an entry for a minimum message length of 100 when the field will only accept 2 characters. 12 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 191
    set to 2 characters; the Maximum Message Length (MAX) is set to 60 characters; and the Default setting (DFT) has no value. 4600rp, 4600g/4600r, 4800i User's Guide 12 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 192
    commands. First, the imager must be put in Manual/Serial Trigger Mode either by scanning the Manual/Serial Trigger Mode barcode (page 3-4), or by sending the Manual/ Serial Menu Command (page 12-9). Once the an asterisk (*) on the programming pages). 12 - 4 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 193
    /4600r/4600rp/ 4800i 030 models) 124 (4600g/4600r/4600rp/ 4800i 050 models) Serial Command # Indicates a numeric entry DEFALT TERMID### Page 12-4 2-1 4600rp, 4600g/4600r, 4800i User's Guide 12 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 194
    KBDCTY26 KBDCTY21 KBDCTY22 KBDCTY10 KBDCTY23 KBDCTY6 KBDCTY27 KBDCTY24 KBDCTY7 KBDSTY0 KBDSTY1 KBDSTY2 KBDSTY6 KBDSTY5 Page 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-6 2-6 2-6 2-6 2-6 2-7 2-7 2-7 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 195
    Data Bits, Stop Bits, and Parity RS-232 Receiver Timeout *Control + ASCII Off DOS Mode Control + ASCII Windows Mode Control + ASCII *Turbo Mode Off Turbo Mode On *Numeric Keypad 2-10 2-10 2-10 2-10 2-11 2-11 2-11 2-11 2-11 2-11 2-11 2-11 2-11 2-12 4600rp, 4600g/4600r, 4800i User's Guide 12 - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 196
    2-14 2-14 2-14 2-14 2-14 2-14 2-14 2-15 2-15 2-15 2-15 2-15 2-15 2-15 2-15 2-15 2-16 2-16 2-16 2-16 3-1 3-1 12 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 197
    Number of Beeps - Good Read Good Read Delay User-Specified Good Read Delay Manual/Serial Trigger Manual Trigger, Low Power In-Stand Sensor Mode Scan Stand 3-2 3-2 3-2 3-2 3-2 3-3 3-3 3-3 3-3 3-3 3-3 3-3 3-4 3-4 3-4 3-5 3-5 3-5 3-6 3-6 3-6 3-7 3-7 3-7 4600rp, 4600g/4600r, 4800i User's Guide 12 - 9
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 198
    Reread Delay LED Power Level Illumination Lights Imager Time-Out Aimer Delay User-Specified Aimer Delay Aimer Mode Centering Window Setting * Indicates default Streaming Presentation Mode Range 0 - 300, 11 3-11 3-11 3-11 3-13 3-13 3-13 3-13 3-13 3-13 12 - 10 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 199
    ) Decode Search Mode Quick Omnidirectional Advanced Linear Decoding (Default for PDF imagers) On *Off Preferred Symbology High Priority Symbology Low Priority Symbology 3-20 3-20 3-20 3-20 3-21 3-21 3-21 3-21 3-22 3-22 3-22 3-22 4-3 4-4 4-4 4-4 4600rp, 4600g/4600r, 4800i User's Guide 12 - 11
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 200
    DLY_XX### DLYFNC## DLYMSG## DFMDF3 DFMBK3## DFMCL3 DFMCA3 DFM_EN0 DFM_EN1 DFM_EN2 VSAF_1 VSAF_2 VSAF_3 2IF_EN0 2IF_EN1 2IFTYP0 2IFTYP64 2IFTYP61 Page 4-4 4-4 4-4 4-4 4-4 4-5 4-6 4-6 4-6 4-7 5-5 5-5 5-5 5-5 5-5 5-5 5-5 5-6 5-6 5-6 6-2 6-2 6-2 6-2 6-3 12 - 12 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 201
    High *Idle High Idle Low 20 *40 60 80 *Manual/Serial Trigger Read Time-Out (0 - 300,000 ms) *30,000 Manual Trigger, Low Power Low Power Time-Out (0 - 120 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-6 6-6 6-6 6-7 6-7 6-8 6-8 6-8 ALLENA0 7-2 ALLENA1 7-2 4600rp, 4600g/4600r, 4800i User's Guide 12 - 13
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 202
    C39ENA1 C39SSX0 C39SSX1 C39CK20 C39CK21 C39CK22 C39MIN## C39MAX## C39APP0 C39APP1 C39B320 C39B321 C39ASC0 C39ASC1 C39DCP Page 7-3 7-3 7-3 7-3 7-3 7-4 7-4 7-4 7-5 7-5 7-5 7-5 7-5 7-6 7-6 7-6 7-6 7-6 7-7 7-7 7-7 7-7 7-7 7-8 7-8 7-9 7-9 7-9 7-9 7-10 12 - 14 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 203
    7-11 7-11 7-12 7-12 7-13 7-12 7-12 7-12 7-13 7-13 7-13 7-13 7-13 7-14 7-14 7-14 7-14 7-14 7-15 7-15 7-15 4600rp, 4600g/4600r, 4800i User's Guide 12 - 15
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 204
    7-17 7-17 7-17 7-17 7-18 7-18 7-18 7-19 7-19 7-19 7-19 7-19 7-19 7-19 7-20 7-20 7-20 7-20 7-20 12 - 16 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 205
    Digit Addenda Off 5 Digit Addenda On *5 Digit Addenda Off *Off On Default All EAN/ JAN Settings 4600rp, 4600g/4600r, 4800i User's Guide Serial Command # Indicates a numeric entry UPANSX0 UPANSX1 UPAAD20 UPAAD21 UPAAD50 UPAAD51 UPAARQ0 UPAARQ1 UPAADS0 UPAADS1 CPNENA1 CPNENA0 UPEDFT UPEEN00 UPEEN01
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 206
    7-26 7-27 7-27 7-27 7-27 7-27 7-27 7-27 7-28 7-28 7-28 7-28 7-28 7-28 7-28 7-28 7-29 7-29 7-29 12 - 18 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 207
    7-30 7-30 7-31 7-31 7-31 7-31 7-31 7-31 7-31 7-31 7-32 7-32 7-32 7-34 7-33 7-33 7-33 7-33 7-33 7-33 7-33 4600rp, 4600g/4600r, 4800i User's Guide 12 - 19
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 208
    7-36 7-36 7-36 7-36 7-36 7-37 7-37 7-37 7-37 7-37 7-38 7-38 7-38 7-38 7-38 7-38 7-38 7-39 7-39 12 - 20 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 209
    7-41 7-42 7-42 7-41 7-42 7-42 7-42 7-43 7-43 7-42 7-41 7-44 7-43 7-43 7-44 7-44 7-44 7-44 7-43 7-43 7-45 4600rp, 4600g/4600r, 4800i User's Guide 12 - 21
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 210
    7-47 7-47 7-48 7-48 7-48 7-48 7-48 7-49 7-49 7-49 7-49 7-49 7-50 7-50 7-50 7-50 7-50 7-50 7-50 12 - 22 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 211
    Imaging Commands Imaging Style - Decoding *Imaging Style - Photo Imaging Style - Manual Beeper On *Beeper Off Exposure (1-7874 microseconds) *Gain - None Gain - ## Page 8-1 8-2 8-2 8-2 8-2 8-2 8-3 8-4 8-4 8-4 8-4 8-4 8-3 8-3 8-2 8-2 8-4 8-4 8-5 4600rp, 4600g/4600r, 4800i User's Guide 12 - 23
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 212
    IMGHIS0 IMGHIS1 IMGNVX1 IMGNVY1 IMGFSP0 IMGFSP1 IMGROT3 IMGJQF### IMGGAM0 IMGGAM### IMGWNL### IMGWNR### IMGWNT### Page 8-6 8-6 8-7 8-7 8-7 8-7 8-7 8-7 8-8 8-8 8-8 8-8 8-8 8-8 8-8 8-8 8-8 8-8 8-9 8-9 8-9 8-9 8-10 8-10 8-11 8-11 8-12 8-12 8-12 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 213
    OCRDFT OCRENA1 OCRENA2 OCRENA3 OCRENA4 OCRENA5 OCRENA0 Page 8-12 8-12 8-13 8-13 8-13 8-13 8-13 8-13 8-13 8-14 8-14 8-15 8-15 9-1 9-1 9-2 9-2 9-2 9-3 9-3 4600rp, 4600g/4600r, 4800i User's Guide 12 - 25
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 214
    Variable g Enter User-Defined Variable h Serial Command # Indicates a numeric entry "OCRCHK01234 56789" "OCRCHK01234 56789ABCDEFG HIJKLMNOPQRSTUVWXYZ" OCRCHK OCRCHK3-1-3-1 OCRCHK2-1-2-1 OCRTMP OCRGPG OCRGPH Page 9-8 9-9 9-9 9-10 9-11 9-13 9-13 9-13 12 - 26 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 215
    to peak, 10 to 100 kHz +32°F to +122°F (0°C to +50°C) -40°F to +140°F (-40°C to +60°C) 0 to 95% non-condensing 4600rp, 4600g/4600r, 4800i User's Guide 13 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 216
    6 feet (1.8 m) to concrete Withstands 5G peak from 22 to 300 Hz 15 kV to any external surface International: CB Scheme to IEC60950-1 and IEC60825-1 (Class 1 LED) (4600r only) South Korea: MIC Australia/NZ: 1.0 (20% or greater) 4 - 14 VDC at imager 13 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 217
    m) to concrete at 10°C Withstands 5G peak from 22 to 300 Hz 15 kV to any external surface International: CB Scheme to IEC60950-1 and IEC60825-1 (Class 1 LED) Australia/NZ: C-Tick marked. Europe: CE 2004 (Class A) cUL listed to CSA C22.2 No. 60950-1-3 4600rp, 4600g/4600r, 4800i User's Guide 13 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 218
    shield 3 Prog 1 4 Supply ground 5 Terminal clock 6 Terminal data 7 Power connection (Refer to table on page 13-1) 8 Keyboard data 9 Keyboard clock 10 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 219
    13 - 5 4600rp, 4600g/4600r, 4800i User's Guide 10 Pin Modular Plug connects to the imager handle 9 Pin Type D Female connects to your terminal 1 2 Cord shield 3 Tied to 5 Volt power 4 Supply ground 5 6 Barcode
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 220
    data to imager 6 Transmit data - Serial data from imager 7 5 Volt power connection 8 Request to send data 9 Clear to send data 10 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 221
    13 - 7 4600rp, 4600g/4600r, 4800i User's Guide 10 Pin Modular Plug connects to the imager handle 1 2 Data + 3 Tied to 5 volt power 4 Supply ground 5 6 7 5 volt power connection 8 9 10 Data - USB
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 222
    13 - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 223
    be performed on this product. These services are to be performed only by an authorized service center. See "Customer Support" on page 15-1 for further information information about cable replacement. Cable replacement instructions are on page 14-2. 4600rp, 4600g/4600r, 4800i User's Guide 14 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 224
    and press firmly. The connector is keyed to go in only one way, and will click into place. Cable Release 14 - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 225
    press firmly. The connector is keyed to go in only one way, and will click into place. Cable Release Cord lock 4600rp, 4600g/4600r, 4800i User's Guide 14 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 226
    The imager automatically performs self-tests whenever you turn it on. If your imager is not functioning properly, review the following Troubleshooting Guide to try to isolate the problem. Is the power on? Is the red aiming illumination line on? If the red aiming illumination line isn't illuminated
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 227
    1. Scan the sample barcodes in the back of this manual. If the imager reads the sample barcodes, check that your barcode is readable. Verify that your barcode factory default settings restored, scan Standard Product Default Settings on page 12-4. 4600rp, 4600g/4600r, 4800i User's Guide 14 - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 228
    14 - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 229
    Technical Assistance If you need assistance installing or troubleshooting, please call your Distributor or the nearest Hand Held Products technical support office: North America/Canada Telephone: (800) +603-6201-7020 E-mail: [email protected] 4600rp, 4600g/4600r, 4800i User's Guide 15 - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 230
    www.handheld.com. For Further Information To download the full User's Guide for these products, visit our website at www.handheld.com. Product Service and Repair Hand Held Products provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 231
    . In the event that the product is returned to Hand Held Products or its authorized service center within the Warranty Period and Hand Held Products determines to its satisfaction that the product is OF HAND HELD PRODUCTS ARISING IN CONNECTION WITH 4600rp, 4600g/4600r, 4800i User's Guide 15 - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 232
    warranties are nontransferable. The limited duration of the warranty for the 4600g, 4600r, 4600rp, or 4800i is for five (5) years. 15 - 4 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 233
    ) l (0x6C i (0x69 w (0x77) d (0x64) D (0x44) y (0x79) d (0x64) ]X0 ]lm 0, 1, 3 ]X0 ]X0 ]X0 ]X0 ]Um 0-3 N (0x4E) e (0x65) J (0x4A) K (0x4B) ? (0x3F) m (0x6D) x (0x78) 4600rp, 4600g/4600r, 4800i User's Guide A - 1
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 234
    ) O (0x4F) O (0x4F) O (0x4F) O (0x4F) O (0x4F) r (0x72) L (0x4C) n (0x6E) W (0x57) P (0x50) s (0x73) y (0x79) 0, 1, 3 f (0x66) 0, 1, 2, 4 T (0x54) t (0x74) = (0x3D) I (0x49) c (0x63) c (0x63) E (0x45) v (0x76) A - 2 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 235
    Note: "m" represents the AIM modifier character. Refer to International Technical Specification, Symbology Identifiers, for AIM modifier character details. Note: Prefix/Suffix entries for specific page 5-1 for information about using Code ID and AIM ID. 4600rp, 4600g/4600r, 4800i User's Guide A - 3
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 236
    5D ] 125 7D } 30 1E RS 62 3E > 94 5E ^ 126 7E ~ 31 1F US 63 3F ? 95 5F _ 127 7F A - 4 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 237
    BD ½ 221 DD Ý 253 FD ý 158 9E ž 190 BE ¾ 222 DE Þ 254 FE þ 159 9F Ÿ 191 BF ¿ 223 DF ß 255 FF ÿ 4600rp, 4600g/4600r, 4800i User's Guide A - 5
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 238
    German Replacement Characters Italian Replacement Characters Swiss Replacement Characters British Replacement Characters Danish Replacement Characters Norwegian Replacement Characters Spanish Replacement Characters A - 6 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 239
    4600rp, 4600g/4600r, 4800i User's Guide A - 7
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 240
    A - 8 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 241
    Sample Symbols UPC-A 0 123456 7890 Code 128 Code 128 Code 39 BC321 Code 93 123456-9$ Interleaved 2 of 5 1234567890 EAN-13 9 780330 290951 Codabar A13579B Straight 2 of 5 Industrial 123456 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 242
    QR Code Data Matrix Test Symbol Numbers 4-CB (4-State Customer Barcode) 01,234,567094,987654321,01234567891 ID-tag (UPU 4-State) J18CUSA8E6N062315014880T 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 243
    Sample Symbols Aztec Package Label MaxiCode Micro PDF417 Test Message Test Message OCR-B with Modulo 10 check character OCR-A with Modulo 36 check character 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 244
    OCR Programming Chart a c d e g h l r t 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 245
    OCR Programming Chart T A Discard O D Save 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 246
    Programming Chart A B C D E F 0 1 2 3 4600rp, 4600g/4600r, 4800i User's Guide
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 247
    Programming Chart 4 5 6 7 8 9 Save Discard Note: If you make an error while scanning the letters or digits (before scanning Save), scan Discard, scan the correct letters or digits, and Save again.
  • Honeywell 4600GSF051C-0F00E | User Manual - Page 248
    Hand Held Products, Inc. 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 46gr-48i-UG Rev D 3/08
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
4600rp, 4600g/4600r, 4800i
Commercial/Retail/Industrial Area Imager
User’s Guide