Hotpoint AH11E09D3B Quick Specs

Hotpoint AH11E09D3B Manual

Hotpoint AH11E09D3B manual content summary:

  • Hotpoint AH11E09D3B | Quick Specs - Page 1
    WALL CASE DIMENSIONS AA MaxMimauxmimCumordCEorxdteEnxstieonnsion MAXIMU(iMn Cin(OicnRhDiensEc)hXeTsE)NSION NOTE: Aluminum wiring may pose special problems - consult a qualified electrician. GRILLE OPTIONS Stamped Aluminum Grille - RAG70 ELECTRICAL CONNECTION 230/208 volt units must be
  • Hotpoint AH11E09D3B | Quick Specs - Page 2
    case of power failures, units automatically resume their operation when power restores, reducing maintenance calls Self Diagnostics - Quickly and easily identify service needs with a nine-point diagnostic code system Backed by an Industry Leader - With a long history of creating durable products at
  • 1
  • 2

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Hotpoint product questions, visit our website at
hotpoint.com or call 800.626.2000.
Specification Revised 11/18
AH11E09D3B
Hotpoint
®
PTAC with Electric Heat 20 amps, 230/208 Volt
ELECTRICAL WIRING
All wiring, including installation of receptacle, must
be made in accordance with local electrical codes
and regulations.
NOTE:
Aluminum wiring may pose special problems –
consult a qualified electrician.
GRILLE OPTIONS
Stamped Aluminum Grille – RAG70
ELECTRICAL CONNECTION
230/208 volt units must be plugged into a receptacle. Installation
must comply with local electrical codes and regulations.
Power cord is permanently attached on all Hotpoint
chassis.
MAXIMUM CORD EXTENSION
WALL CASE DIMENSIONS
RAB80 WALL SLEEVE
Heavy-gauge galvanized steel, with
insulation, for quick self-assembly.
A
– 42", B – 13-3/4", C – 16"
WALL OPENING DIMENSIONS
Add 1/4" to A and C dimensions
for all cut-outs.
RAB80 16-1/4" Min. H x 42-1/4" Min. W
AH11
HEATER KW
230/208 VOLT
LINE CORD CONNECTED UNITS
Heater Watts
3604.5/2966
Heater BTU
10900/8900
Heater Amps
15.7/14.3
Min Circuit
20
Recommended
Protective Device
20 amp time-delay fuse or breaker
A
C
B
70"
30"