Humax CI-8100 User Manual - Page 52

** ** 8.3 Manual Search You can search channels of the selected satellites by transponders if you know the Transponder information. 1. Satellite Select a satellite to search from the satellites set in Antenna setting . 1. Select Satellite using the button. button, and press the OK or 2. Select one of the Satellite names to search channel using the button, press the OK button. Note: If the satellite scheduled to search channel is not exist in the Satellite list, move to Antenna Setting menu, set Antenna for the Satellite, and then try again. 2. Transponder Sets transponder value for the satellite 1. Select Transponder using the or button. button and press the OK 2. Select one value from the Transponder value using the button, and press the OK button. 3. If you cannot find your desired Transponder information form the Transponder List, select User Define, and press the OK button to change the Transponder information as follows. ** • Enter Transponder frequency using the NUMERICAL (0~9) buttons. • Select Polarization and press the OK or button to select one option among Auto/Horizontal/Vertical. Note: Horizontal outputs 18V, and Vertical outputs 13.5V through LNB line. GB 51