Humax CI-8100 User Manual - Page 67

9. Software Update ** 4. If using Automatic Update You can set the product to find HUMAX software update site and update software automatically. 1. Select Automatic from Update Menu screen using the button, and press the OK or button. 2. Automatically search for new software. Select Stop and press the OK button to finish Search. 3. When detecting update software, the following result is displayed. If new software is not found by Automatic, use Manual Update. 4. Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu without updating. 5. When completing the software update, the product is automatically powered off and on again. ** Note: Software Update Sites of HUMAX are listed in the following table. Satellite Transponder data Astra1 12669 (V) 22000 5/6 Sirius 12054 (V) 27500 3/4 Hispasat 11811 (H) 27500 3/4 Nilesat 11765 (H) 27500 3/4 Hotbird 11623 (V) 27500 3/4 ** Among the Software Update Sites of HUMAX, the software search operation is performed only for the satellites that have been set to Enable in Installation - Antenna Setting - Satellite Alternative menu and that have all other Antenna Setting correct. GB 66