Humax CryptoONE User Manual - Page 44

The product cannot work at all during software update. It may take 5-10 minutes to update software. Updating software is largely divided into two ways, automatic detection and using software update menu (MENU-INSTALLATION-STATUS-STB UPGRADE). New software can be found when powering on the product. The notice informing you of new software detection will appear on the screen. If you would like to update software, select Yes, and press the OK button. After completing the software upgrade, the product is automatically powered off and on again. 2. Software Update from PC You can connect your product to the PC directly and upgrade your software by transferring the new software from the PC. Follow these steps to download new software from PC to this product. ** 1. Download new software file equivalent for this product model from our website (http://www.humaxdigital.com). 2. Download and install download tool from our website. 3. Connect your PC to this product with RS-232C serial cable. 4. Execute installed download tool, and then follow the instructions on the download tool. 5. Press the STANDBY button to operate product. ** ** Note: The feature is for CR-FOX II/AEE GB 43