Humax DT9500CI User Manual - Page 25

5. Installation 5.2 Advanced Installation You can search other channels except DIGITURK channel. Enter the PIN code using the NUMERIC buttons. The default PIN code is set to "0000". 1. Antenna Setting You can set antenna and LNB information to search channels using Antenna Setting (MENU-Installation-Advanced Installation-Antenna Setting). ** • Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for SMATV. • Satellite Name: Displays the satellite list in name order. If the desired satellite name is not listed, then select "User Defined". You can enter the Satellite Name using the keyboard displayed on the screen. • LNB Frequency: Select the L.O (Local Oscillator) Frequency of the LNB. • 22KHz Tone: When using the 22HKz tone switch, select "Enabled". Otherwise, select "Disabled". • DiSEqC Input: If you are using DiSEqC (Digital Satellite Equipment Control) switch to connect multiple antennas or LNBs, select DiSEqC input to connect to antenna or LNB. • Motorised System: When using motorised system, select "Enabled". Otherwise, select "Disabled". When Motorised System is set to "Enabled" DiSEqC Input is disabled. • LNB Voltage: You can select "Standard" voltage or "High" voltage. • LNB Power: You can select "On" or "Off". ** When you complete the settings, press the OK button to move to the Manual Search menu. GB 24