Humax DTT-4000 User Manual - Page 46

** ** ** ** ** 8. Installation ** 4.Guard Interval Required for Channel Search. If you don't know the value, please select Auto. 1. Select Guard Interval using the or button. button, and press the OK 2. Select one option among Auto, 1/4, 1/8, 1/16 and 1/32 using the button, and press the OK button. 5. Network Search If specified frequency channel information and other channel information are provided together, the channel, which belongs to other frequency channel, is also searched. 1. Select Network Search using the or button. button, and press the OK 2. Select one option between Enable and Disable using the button. ** ** 6. Search You can complete the setting and start searching. 1. Select Search and press the OK button to start Manual Search. 2. The next procedures are the same as those for Automatic Search. Please refer to Automatic Search. 8.3 Default Setting Default Setting restores the receiver to the default settings. Warning: Please note that once you perform Default Setting, all data such as Channel List, and User Configured data are deleted. ** GB 46 ** ** ** ** **