Humax DV-1000T User Manual - Page 57

** ** ** ** 8. Installation ** ** 5. Network Search If specified frequency channel information and other channel information are provided together, the channel, which belongs to other frequency channel, is also searched. Select one option between Enable and Disable using the button. Note: You can search after the setting of Manual Search. Refer to 8.1 Automatic Search. 8.3 Default Setting Default Setting restores the receiver to the default settings. Warning: Please note that once you perform Default Setting, all data such as Channel List, and User Configured data are deleted. To perform Factory Default: 1. Press the MENU button. 2. Select Installation using the OK or button. button, and press the 3. Enter Password using the NUMERICAL (0-9) button. ** 4. Select Default Setting using the button, press the ** OK or button. 5. Select Yes and press the OK setting to Factory Default. Select No and press the OK return to the previous menu. button to restore all or BACK button to 6. Confirm again to start loading default setting. Enter Password using the NUMERICAL (0-9) button to perform restoring. 7. When completing the default setting, press the OK button to automatically run the Installation Wizard. When default setting is completed, Installation Wizard is automatically displayed, which helps Channel Search. For detailed information about Installation Wizard, refer to 3. Installation Wizard. ** GB 56 ** ** ** ** ** ** **