Humax DV-1000T User Manual - Page 59

** ** ** ** ** 9. Software Update ** ** 1. If new software is found when powering on 1. A message will be displayed to notify that new software is found. 2. Select Yes and press the OK software. button to update the 3. Starts downloading new software. Please wait until the updated is completed. 4. When completing the software update, the equipment is automatically powered off and on again. 2. If updating software from Menu 1. Press the MENU button. 2. Select Installation using the OK or button. button, and press the 3. Enter Password using the NUMERICAL (0-9) buttons. 4. Select Software Update using the button, and press ** the OK or button. ** 3. Automatic Update You can set the product to find HUMAX software update site and update software automatically. 1. Select Automatic Update using the button, and press the OK or button. Automatically search for new software. 2. When detecting update software, the following result is displayed. If new software is not found by Automatic, use Manual Update. 3. Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu without updating. Select Later and press the OK button to update later. That means the update menu display as soon as you turn on the receiver next time. 4. When completing the software update, the product is automatically powered off and on again. ** GB 58 ** ** ** ** ** ** **