Humax F1-CI User Manual - Page 14

Antenna Setting More than one satellite antenna may be connected to the STB. It can store the characteristics of at least 8 different antenna configurations using the this sub menu. Press OK after Antenna Setting and go to Manual Search. Antenna Alternative of ASTRA1 and HOTBIRD is decided the factory setting as following; Antenna Alternative of ASTRA1 is 7. Antenna Alternative of HOTBIRD is 8. So you can set Antenna Alternative for other satellite from 1 to 6. It is mean that to search a ASTRA1 and HOTBIRD channels, you do not need to adjust the Antenna Setting's item because it is automatically decided by function of Automatic Search. Antenna Alternative : Select an antenna alternative from 1 to 8. Satellite Name : Select a satellite name of LNB configuration. LNB Frequency : Select a LNB frequency or type on the dish - Universal, 5150, 9750, 10600, 11475, User( Use to enter another alternative ). 22 Khz Tone : To support the universal LNB. -Enable, Disable. 0/12 Volt Switch : It is possible automatically switch between two LNBs. DiSEqC Input Selection : It is possible to connection up to 4 LNBs. Select DiSEqC 1,2,3 and 4 according to LNB's connected configuration of DiSEqC. Refer to right table. Manual Search Use to search for channels using the frequency, polarisation, symbol rate and FEC of known transponders. This submenu includes signal level as graphic bar shape so that you can view the status of antenna. Antenna Alternative : Select the number of the Antenna Setting. Matrix A B C D Option S/W a a b b Satellite position S/W a b a b 11